Centrifugation

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge 5810 R w/ Eppendorf A-4-81 Rotor Spares/Repair Lab

ITEM-47794

Eppendorf 5810 R Refrigerated Centrifuge - Spares or Repair

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition but does not power on, likely due to a suspected motherboard fault. Therefore, it is being sold as Spares or Repair.

Includes:

4 x Swinging Buckets (Eppendorf 09/04 – Max Load 780g)
8 x Sample Holders (5-hole, 3cm diameter)
4 x Sample Holders (1-hole, 6cm diameter)
1 x Sample Holder (12-hole, 2cm diameter)

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

ITEM-48416

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Rotor Type Ultra – Swinging Bucket
Maximum Speed 41,000 rpm
Maximum RCF at r max (g) 288,000 x g
k-Factor 124
Rotor Material Titanium
Bucket Material Titanium, Anodized Aluminum Cap

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

ITEM-48418

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Platform: Floor Prep
Rotor Type: Swinging-Bucket (Ultracentrifugation)
Maximum RPM: 40,000 rpm
Max g-Force: 285,000.00
k-Factor: 137
Number of Tubes: 6×14 mL / 14×95 mm(6×14 mL / 1×4 in)

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 2L Floor Standing Centrifuge w/ Rotor Lab

ITEM-48544

MSE Mistral 2L Floor Standing Centrifuge w/ Swing-Out Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Genevac HT-8 Series II Centrifugal Evaporation System Accessories Spares/Repair

ITEM-48655

Genevac HT-8 Series II Centrifugal Evaporation System Accessories Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but does not power on.

Therefore, it is listed as Spares/Repair.

Box of Accessories includes:

Tube racks / sample holders: 5 unwrapped, 11 wrapped in bubble wrap, 6 in the centrifuge, and 2 in the centrifuge from an HT I Series.
Rotor buckets: 23 in total, assorted sizes and shapes.
Lamps: 5 unboxed and 3 packaged Xenophot 64695 HLX bulbs.
Cables and tubing: Vacuum hose and electrical connection cables for the HT-8 system (connects to condenser and vacuum pump).
Spare parts: O-rings, gaskets, and seals in labelled bags.
Software & accessories: Control/driver CD and clear acrylic protective plates.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-20 XP Floor Standing Centrifuge Spares/Repair Lab

ITEM-49365

Beckman Coulter Avanti J-20 XP Floor Standing Centrifuge Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but fails to powers on, it is therefore listed as Spares/Repair

Please note; There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge w/ A-4-62 Rotor Spares/Repair Lab

ITEM-49742

Eppendorf 5804 R Centrifuge w/ A-4-62 Rotor Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing the following error was present; Error 17, a PCB fault.

Which prevented any further testing.

It is therefore listed as Spares/Repair.

£ 450.00 (ex. VAT) 1 in stock

Thermo Scientific TX-1000 Swinging Bucket Rotor 4200rpm Lab

ITEM-48330

Thermo Scientific TX-1000 Swinging Bucket Rotor

This item was removed from a university lab where it was surplus to requirements.

It is in excellent cosmetic condition. No buckets are included with this rotor.

Specifications:

Max RPM: 4200
Model: TX-1000
Item Number: 75003017

The lab confirmed it was in working order prior to removal.

£ 400.00 (ex. VAT) 1 in stock

ALC PK121 Multispeed Benchtop Centrifuge w/ ALC T515 Swinging Bucket Rotor Lab

ITEM-47205

ALC PK121 Multispeed Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with some rust spots visible inside and is in good working order.

Includes;

ALC T515 Swinging Bucket Rotor w/ 4 x Buckets.

£ 350.00 (ex. VAT) 1 in stock

MSE 43124-141 4 x 200ml Swing-Out Rotor for Harrier 18/80R

ITEM-45361

MSE 4 x 200ml Swing-Out Rotor for Harrier 18/80R

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition and includes 4 x 200ml buckets.

Specifications.

Maximum Speed: 6000 RPM.
Model: 43124-141
Serial No.: B012R 9070

£ 350.00 (ex. VAT) 1 in stock

Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM Lab

ITEM-46199

Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

Specifications;

Max load 1.4kg
Max rpm 4100
Includes 2 x plate-buckets

£ 350.00 (ex. VAT) 1 in stock

Sorvall Instruments RC5C Floor Standing Centrifuge Spares/Repairs

ITEM-47290

Sorvall Instruments RC5C Floor Standing Centrifuge - Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and has been tested using an SA-600 rotor (not included) at the rotor's maximum speed of 16,500 rpm.

However, during temperature testing it failed to reach its minimum set point of -20°C, only achieving -8°C.

Therefore, it is listed as Spares/Repair.

Please note; There is not rotor included.

£ 350.00 (ex. VAT) 1 in stock

Beckman J2-21 Floor Standing Centrifuge with JA10 10000rpm Rotor Lab

ITEM-32037

Beckman J2-21 Floor Standing Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with only minor marks from use.

Included are;

Beckman J2 - 21 Centrifuge

Cat no. 341737

SN - E948

Rotor Type - JA 10

SN - 17342

10,000rpm Max

Hold 6 x Buckets 7cm diameter

£ 350.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

£ 315.00 (ex. VAT) 1 in stock

BECKMAN JA-20 Fixed Angle Rotor Lab

ITEM-41409

BECKMAN JA-20 Fixed Angle Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has not been tested.

Specifications:

Type: JA-20
Serial Number: E.21076
Maximum RPM: 20,000
Capacity: Holds 8 x 50ml tubes
Included: Manual

£ 300.00 (ex. VAT) 1 in stock

MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab

ITEM-36610

MSE Falcon 6/300 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.

This item also includes the following:

1 x Mistral MSE Rotor - 43124

Capacity: 4 x 750ml
SN: 986766
Max RPM: 2500
(There are no rotor buckets included)

£ 250.00 (ex. VAT) 1 in stock

Heraeus HFA 15.2 Rotor For Centrifuge Lab

ITEM-41488

Heraeus HFA 15.2 Rotor For Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition but has not been tested.

Model: HFA 15.2
Holds: 18 x 2 ml tubes

£ 250.00 (ex. VAT) 1 in stock

Sorvall F-28/50 Rotor 28,000rpm Lab

ITEM-46643

Sorvall F-28/50 Rotor 20,000rpm Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, and remains untested.

Specifications;

Angle: 34º

Speed: up to 28,000 rpm

10 places for (Ø) x (H) 2,9 x 10,3 cm tubes with a capacity of 50 ml.

The F-28/50 rotor is autoclavable at 121°C

£ 250.00 (ex. VAT) 1 in stock

Sorvall F-28/50 Rotor 28,000 Max RPM lab

ITEM-46925

Sorvall F-28/50 Rotor 28,000 Max RPM lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, it has not been tested at our facility.

£ 230.00 (ex. VAT) 1 in stock

Hettich E1547 Lab Centrifuge Rotor 48 x 3g, 1136, 13000 RPM

ITEM-09570

This rotor was removed from a lab during a clearout.

We have not tested the rotor so it will need to be checked and tested prior to use in your centrifuge.

£ 100.00 (ex. VAT) 1 in stock

Centurion Cell-Prep 4050 Benchtop Centrifuge Lab

ITEM-32099

Centurion Scientific Centrifuge 4050 Series Cell-Prep

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in reasonable cosmetic condition, with visible signs of wear and some rust.

It powers on without issue and has been tested to operate at 50 RPM, 100 RPM, and its top speed of 200 RPM.

Included Components:

12-bay centrifuge rotor
1x balance weight

Specifications.

Model: 4050 Series Cell-Prep
Serial No.: 98042157