General Laboratory
Items 451 to 500 of 953
£ 1,000.00 (ex. VAT) 1 in stock
Beckman Coulter JS-5.3 Centrifuge Swing-Out Rotor w/ 4 x JS 5.3 Buckets Lab
ITEM-46888
Beckman Coulter JS-5.3 Centrifuge Rotor w/ 4 x JS 5.3 Rotor Buckets Lab
This items was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, it has not been tested.
Included;
4 x JS 5.3 Rotor Bucket
£ 1,000.00 (ex. VAT) 1 in stock
Kryo 560-16 Planer Controlled Rate Freezer Lab
ITEM-37138
Kryo 560-16 Planer Lab
This system was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
1x Kryo 560-16 Planer:
Model. K10/16
- Powers on
- Interior is in excellent condition.
£ 1,000.00 (ex. VAT) 1 in stock
Watson Marlow 205S Peristaltic Pump Lab
ITEM-46374
Watson Marlow 205S Peristaltic Pump Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and in working order.
£ 1,000.00 (ex. VAT) 1 in stock
Planer Kryo 560-16 Controlled Rate Freezer Lab
ITEM-38164
Planer Kryo 560-16 Controlled Rate Freezer Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it require a liquid nitrogen supply which we do not have available.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Leica Cryocut 1800 Reichert-Jung CM1800 Spares/Repair Lab
ITEM-37479
Leica Cryocut 1800 Reichert-Jung CM1800 Microtome Spares/Repair Lab
This item was removed from a university lab where it was surplus to requirement.
It is in reasonably good cosmetic condition and in good mechanical order, however it failed the PAT on insulation.
Therefore, further testing could not be conducted and it is listed as Spares/Repair.
Specifications:
- Cat No. 042019409
- Serial No. 25320449
£ 1,000.00 (ex. VAT) 1 in stock
New Brunswick Scientific Co G-25 Shaking Incubator Lab
ITEM-42975
New Brunswick Scientific Co G-25 Shaking Incubator Lab
This item was removed from a university lab where it was surplus to requirement.
It is in reasonably good cosmetic condition and in working order.
Specifications:
- Model - G-25
- S/N - 281548
£ 990.00 (ex. VAT) 1 in stock
Piramoon Technologies F15-6x100 FiberLite 15,000rpm 24,700g Centrifuge Rotor Lab
ITEM-35716
Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor
This was removed from a university lab where it was surplus to requirements.
The item is in very good cosmetic condition and also includes its original carry case.
Items features are as follows:
15000rpm
24,700 X G
6x 100ml tube holders
Quick release autolock
£ 990.00 (ex. VAT) 1 in stock
C.B.S Scientific Optimizer PCR Workstation Lab
ITEM-36000
C.B.S Scientific Optimizer PCR Workstation
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
Includes:
-GE fluorescent light
-GE Germicidal lamp
£ 990.00 (ex. VAT) 1 in stock
Anglia Scientific Cryotome Model 0600 Cryostat Lab
ITEM-39085
Anglia Scientific Cryotome Model 0600 Cryostat
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. It is in reasonable cosmetic condition with minor marks.
(digital thermometer not included).
Model- 0600
S/N- 9002459
£ 960.00 (ex. VAT) 1 in stock
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station Lab
ITEM-34875
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 950.00 (ex. VAT) 1 in stock
New Brunswick Innova Type 4330 Incubator Shaker Lab
ITEM-40993
This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.
The unit powers up and heats, but does not cool or shake.
It is sold for spares/repairs.
£ 925.00 (ex. VAT) 1 in stock
Labcaire Model - BH12 Class II Biological Safety Cabinet Lab
ITEM-25327
This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working.
The unit powers up and both the fans and the white lights are working. There is no UV light fitted.
It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit.
Inside dimensions - D62.5 W120 H70cm
Hours - 14001.4
£ 910.00 (ex. VAT) 1 in stock
Genlab Model SP/LCI/320/SS/DIG Lab Incubator
ITEM-38911
Genlab SP/LCI/320/SS/DIG Laboratory Incubator
This was removed from a working lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition with minor marks
6 Baskets/Drawers - 51 x 50 x 15cm
£ 900.00 (ex. VAT) 1 in stock
Labcaire Model - BH12 Class II Biological Safety Cabinet
ITEM-41421
This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements.
The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included.
It is in reasonably good cosmetic condition internally and externally.
Inside dimensions - D63 W120 H70cm
Hours - 1078 1.2
£ 900.00 (ex. VAT) 1 in stock
Carbolite CWF 1100 BenchTop Furnace
ITEM-46400
Carbolite CWF 1100 BenchTop Furnace
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 900.00 (ex. VAT) 1 in stock
Millipore Elix 70 Water Purifier with Millipore 350 Tank and Pump Unit
ITEM-42458
Millipore Elix 70 Water Purifier with Millipore 350 Tank and Pump Unit
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and powers on. We are unable to conduct further testing at our facility.
According to the previous owner, the system was functional when last used.
Includes:
- Millipore Elix 70 Purifier (Serial No.: F6SN85760 A, Software Version: v1.05-01, Capacity: 70 liters/hour)
- Millipore SDS 350 Storage and Distribution System (Serial No.: F7CN14436 B, Capacity: 350 liters)
£ 900.00 (ex. VAT) 1 in stock
Tecan Genesis RSP 100/4 Genesis Liquid Handling System w/ 2200 x 1000ul Tips Lab
ITEM-37708
This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.
The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.
Includes the following:
1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1
1 x Gemini Software Manual V3.10
1 x Tecan EVOware Training handbook
1 x Gemini Software Training Course booklet
1 x Genesis RSP Operating Manual
1 x Genesis Instruments Setup and Service Manual V4.1
£ 900.00 (ex. VAT) 1 in stock
Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor
ITEM-35614
Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
Maximum capacity- 6x1000ml
Max RPM- 4200
Includes:
X18 Beckman 4x50ml tube slots (345371)
X14 Beckman 14x15ml tube slots (339180)
X3 1000ml buckets 1066g (368575)
X3 1000ml buckets 1067g (368575)
Model number- JS-4.2
Serial number- 07U2791
£ 900.00 (ex. VAT) 1 in stock
Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab
ITEM-44705
Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
£ 900.00 (ex. VAT) 1 in stock
TPI Vibratome Series 1000 Sectioning System Microtome Lab
ITEM-42761
TPI Vibratome Series 1000 Sectioning System Microtome Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Specifications;
- Product No. 054026
- Serial No. V374910
£ 900.00 (ex. VAT) 1 in stock
Sigma 2-6E Benchtop Centrifuge w/ 11070 Swing-Out Rotor with 4 x Bucket Lab
ITEM-46966
Sigma 2-6E Benchtop Centrifuge Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Included:
Sigma 11070 151/P Swing-Out Rotor with 4 x Buckets.
£ 895.00 (ex. VAT) 1 in stock
Wheaton 2-Tier Modular Roller Apparatus Cat No 348970CE Lab
ITEM-38695
Wheaton Modular Roller Apparatus Cat No 348970CE
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. The speed adjustment knob is missing, but still works.
Item has 2 tiers & 12 rollers.
Roller Area x 2: 52cm x 67cm.
£ 880.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
ITEM-36280
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up but was not tested further as there is no software with it.
It is in good cosmetic condition with minor marks.
Included with it are;
1x PC connection cable
1x Spare mounting plate
1x Bioworks opertating system manual
1x Bioworks version 1.4 release notes
1x Biomek 2000 user manual
1x Biomek 2000 quick start guide
1x Biomek 2000 installation and maintenance guide
1x Beckman plus tutorial
£ 860.00 (ex. VAT) 1 in stock
PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath Lab
ITEM-28204
PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the heating is in good working order.
Inside tank dimensions - L59 W31 H37cm
It is in good cosmetic condition with some marks from use.
£ 855.00 (ex. VAT) 1 in stock
PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab
ITEM-28205
PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the heating is in good working order.
Inside tank dimensions - L59 W31 H37cm
It is in good cosmetic condition with some marks from use.
£ 850.00 (ex. VAT) 1 in stock
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
ITEM-41804
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit had been newly installed in late 2023, so has not seen heavy use.
Also included is the following:
Nardi Compressor - Dryer 400
Installed/Replaced - 23/11/23
£ 850.00 (ex. VAT) 1 in stock
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab
ITEM-35645
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights
These were removed from a university lab where they were surplus to requirements.
Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks.
Includes:
10 x Ohaus 200g weights
10 x power supplies
4 x manuals
These scales also have the option to be operated with AA batteries
Max 300g
Model number- TA301
£ 840.00 (ex. VAT) 1 in stock
Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab
ITEM-35288
Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle
This was removed from a university lab where it was surplus to requirements.
Included are;
702 SM Titrino with remote.
The unit powers on and performs self-check.
703 Ti Stand
We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.
Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).
£ 840.00 (ex. VAT) 1 in stock
AARIAC Model Clean Air CLR 20/30 S T UK Lab
ITEM-41805
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use.
Also included is the following:
Nardi Compressor - Dryer 400
Installed/Replaced - 23/11/23
£ 840.00 (ex. VAT) 1 in stock
Sanyo MCO-15AC Lab Incubator Co2 Lab
ITEM-42716
Sanyo MCO-15AC Lab Incubator CO2 Lab
This item was removed from a university lab where it was surplus to requirement.
It powers on and is in complete working order.
Item supplied with three shelves.
It is in good cosmetic condition, however the door handle has been removed, the latch and seal remain in good working order.
£ 830.00 (ex. VAT) 1 in stock
AARIAC Clean Air Type CLR 20/30 S T UK Lab
ITEM-41806
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use.
Also included is the following:
Nardi Compressor - Dryer 400
Installed/Replaced - 23/11/23
£ 830.00 (ex. VAT) 1 in stock
GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab
ITEM-25464
This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.
There are 6 Racks inside with drawers that hold 5ml tubes.
£ POA 1 in stock
Parker Balston Lab Gas Generator Model 74-5041-220
ITEM-35061
This item is new in stock. Please enquire for further details.
£ 805.00 (ex. VAT) 1 in stock
ALC Multispeed Refrigerated Centrifuge PK 121 R + T515 4300rpm Rotor Lab
ITEM-16480
This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works.
The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37.
The Rotor number displayed T515.
The Buckets Serial number is 0306/01.
The buckets Cat Number is 11210335.
The number on the bottom of the buckets is Ch. 007027 S.303.
The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435.
The ALC 2035 Adapter is for 50ml tubes.
£ 800.00 (ex. VAT) 1 in stock
Beckman Coulter Centrifuge Rotor Type 50.2 Ti Lab
ITEM-41839
Beckman Coulter Rotor Type 50.2 Ti
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
Features:
- Type - 50.2 Ti
- Max RPM - 50,000
- The Unit Has 12 x Slots For Vials
- Only Use in Instruments Classified H, R, S
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs
ITEM-35813
This was removed from a university lab where it was surplus to requirements
THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.
It is sold for spares/repairs.
No rotor included.
£ 800.00 (ex. VAT) 1 in stock
ElectroThermal Wax Dispenser MH8523B Lab
ITEM-45517
ElectroThermal Wax Dispenser MH8523B
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition other than wax covering much of the exterior, including the handle.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Bright OTF 5000 Cryostat Microtome 5040 Lab Spares/Repairs
ITEM-42297
Bright OTF 5000 Cryostat Microtome 5040
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
The internal light powers on, and the manual rotary operation handle moves the specimen holder up and down smoothly.
However, despite the compressor running, the probe temperatures did not drop from ambient after three hours of operation.
Therefore, it is listed as Spares/Repair.
Includes:
- 1 x Operation Manual
- 3 x specimen platters for the quick freeze block
- 2 x stainless inner plates
£ 800.00 (ex. VAT) 1 in stock
Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab
ITEM-37244
Beckman GS-6KR Centrifuge
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and working order.
During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.
Includes:-
- Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
- 4 x Buckets, the cover for one of the baskets is not included.
£ 800.00 (ex. VAT) 1 in stock
Illumina High-Speed Microplate Shaker Lab
ITEM-45049
Illumina High-Speed Microplate Shaker
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
RPM:
- Tested at 600 RPM (lowest)
- Tested at 1000 RPM
- Tested at 2500 RPM (maximum)
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Infors AEROTRON Shaker Incubator Lab Spares/Repairs
ITEM-39841
Infors AEROTRON Shaker Incubator
This was removed from a university lab where it was surplus to requirements.
The unit does not power up. It is sold for spares/repairs.
We think this unit would make for a great movie prop.
£ 800.00 (ex. VAT) 1 in stock
New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab
ITEM-41392
New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and good working order, it has been tested to its minimum temperature of -45ºc with our external thermometer reading -43.3ºc. (Not included).
This item features:
4 x shelves (55x55cm)
£ 800.00 (ex. VAT) 1 in stock
Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab
ITEM-46195
Oxford Cry Systems Crystal Diffractometer Cryostream Probe
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition. It was not possible to test the functionality at our facility.
Includes:
- Single crystal diffractometer cryostream probe
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Julabo Recirculating Chiller Model: FLW1703GB Lab Spares/Repairs
ITEM-20313
This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition. It has scratches and stains along its surface.
The unit powers up but requires a replacement compressor.
It is in good cosmetic condition with minor marks.
It is sold for spares/repairs.
£ 800.00 (ex. VAT) 1 in stock
Nuaire Laboratory CO2 Incubator Model NU-5500E Lab
ITEM-46363
Nuaire Laboratory Incubator Model NU-5500E Lab
This item was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
£ 760.00 (ex. VAT) 1 in stock
Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab
ITEM-36950
Heraeus Labofuge 400 Function Line Benchtop Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 3500rpm.
It is in reasonable cosmetic condition with light marks and rusting.
Heraeus Rotor #8179
4 x Buckets #8172 Ch.003515
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Priorclave PS/RSC/EH350 Autoclave 350 Litres Floor Standing Spares/Repair Lab
ITEM-42189
Priorclave PS/RSC/EH350 Autoclave 350 Litres
This item was removed from a university laboratory where it was surplus to requirements.
Service and function checks have been completed with the following notes:
- Auto-fill, door system, heaters, load probe, cooling, and freesteam pulsing are operational.
- Low water system has been cleaned and is working correctly.
- Safety valve has been tested and is functioning.
- Vacuum system is non-operational and has been switched off in the software.
- Water chamber has been cleaned but will require further cleaning after additional use.
- Two successful test runs were completed at 123°C for 20 minutes.
- Tactrol 3 software access is unavailable.
Due to the vacuum system being non-operational, this item is listed as Spares/Repair.
Specifications:
- Tactrol 2 control system
- Capacity: 350 litres
- Internal dimensions: 58 x 90 x 59 cm (W x D x H)
- Maximum temperature: 138˚C
- Power supply: 3 phase, 400 volts with five-pin large red plug
- Two full-size shelves fitted
- Fully plumbed water system
- Serial No.: 1802
- Year: 2001
£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab
ITEM-23391
This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition with marks from use. All modules power up.
We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.
The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.
The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.
We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.
The system is made up of the following;
1 x Matrix Hydra II
Cat no. 109610
1 x Matrix 2 Position Stage
1 x Apogent Discoveries Matix Hydro Pump Module
The unit powers on with all 3 Fills working.
1 x Matrix P1 Control Box
1 x Innovadyne 1-Channel Nanofill
The unit powers up.
1 x Grant Instruments Type MS1
The unit powers up.
Dell Laptop with Microsoft Mouse
Model - PP04X
Hydra II-Plus-One Control Software Version 3.1.3 Installed
The unit powers up and the software runs.
Software Discs:
Matrix Hydra II-Plus-One Control Software Version 3.1.3
Matrix Hydra II-Plus-One Control Software Version 3.1.2
SuperLogics LE Software Suite Rev 2.9
2 x Socket Installation discs
Various tubing and accessories
Operating instructions
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31840 Lab
ITEM-20385
This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
Everything powers up and the system is in good cosmetic condition with some marks from use.
There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code
'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)
We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.
This error makes it impossible to home the system. So it could not be tested any further.
The system comprises of;
1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation
Cat no. A31840
Unit dimensions - W77 L92 H98cm
1 x IBM ThinkCentre PC
MT-M 8113-DA1
Biomek Software Version 3.3 installed.
1 x Lenovo Monitor
Type - 9227-AC1
1 x Lenovo Keyboard
1 x IBM Mouse
2 x Nalgene 2 Gallon Waste/Supply Bottles
Box of Accessories:-
Beckman Coulter AccuFrame
Beckman Coulter Vacuum Valve Unit
Power Adaptor
Various cables
8 x 2ml Tube holders (24 tube slots in each)
94 x 2ml tubes
Vacuum Manifold Base
23mm Spacer Collar PN 719751
36mm Collar
3 x Thermo Scientific 96 well 0.2ml plates.
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter BioMek NXp Laboratory Automation System Lab
ITEM-41419
Beckman Coulter BioMek NXp Laboratory Automation System Lab
This system was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers up.
The system includes the following:
- Software
- PC and monitor
- Manual
- 40 x boxes of 10 racks of P20 pipette tips
- 8 boxes of 10 racks of P250 pipette tips
- 1 x Biomek valve Unit
- 1 x Inheco TEC Control 96/RS232
- 1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs)
- 1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs)
- Box of tubing
- Box of spare parts and accessories
- 1 x light curtain test rod
Items 451 to 500 of 953