General Laboratory

£ 925.00 (ex. VAT) 1 in stock

Labcaire Model - BH12 Class II Biological Safety Cabinet Lab

ITEM-25327

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working.

The unit powers up and both the fans and the white lights are working. There is no UV light fitted.

It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit.

Inside dimensions - D62.5 W120 H70cm

Hours - 14001.4

£ 910.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

£ 900.00 (ex. VAT) 1 in stock

Sigma 2-6E Benchtop Centrifuge w/ 11070 Swing-Out Rotor with 4 x Bucket Lab

ITEM-46966

Sigma 2-6E Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Included:

Sigma 11070 151/P Swing-Out Rotor with 4 x Buckets.

£ 900.00 (ex. VAT) 1 in stock

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab

ITEM-44705

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

£ 900.00 (ex. VAT) 1 in stock

Tecan Genesis RSP 100/4 Genesis Liquid Handling System w/ 2200 x 1000ul Tips Lab

ITEM-37708

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.

Includes the following:

1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1

1 x Gemini Software Manual V3.10

1 x Tecan EVOware Training handbook

1 x Gemini Software Training Course booklet

1 x Genesis RSP Operating Manual

1 x Genesis Instruments Setup and Service Manual V4.1

£ 900.00 (ex. VAT) 1 in stock

Labcaire Model - BH12 Class II Biological Safety Cabinet

ITEM-41421

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements.

The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included.

It is in reasonably good cosmetic condition internally and externally.

Inside dimensions - D63 W120 H70cm

Hours - 1078 1.2

£ 900.00 (ex. VAT) 1 in stock

Carbolite CWF 1100 BenchTop Furnace

ITEM-46400

Carbolite CWF 1100 BenchTop Furnace

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 895.00 (ex. VAT) 1 in stock

Wheaton 2-Tier Modular Roller Apparatus Cat No 348970CE Lab

ITEM-38695

Wheaton Modular Roller Apparatus Cat No 348970CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. The speed adjustment knob is missing, but still works.

Item has 2 tiers & 12 rollers.

Roller Area x 2: 52cm x 67cm.

£ 880.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab

ITEM-36280

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further as there is no software with it.

It is in good cosmetic condition with minor marks.

Included with it are;

1x PC connection cable

1x Spare mounting plate

1x Bioworks opertating system manual

1x Bioworks version 1.4 release notes

1x Biomek 2000 user manual

1x Biomek 2000 quick start guide

1x Biomek 2000 installation and maintenance guide

1x Beckman plus tutorial

£ 855.00 (ex. VAT) 1 in stock

PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab

ITEM-28205

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the heating is in good working order.

Inside tank dimensions - L59 W31 H37cm

It is in good cosmetic condition with some marks from use.

£ 850.00 (ex. VAT) 1 in stock

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab

ITEM-35645

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights

These were removed from a university lab where they were surplus to requirements.

Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks.

Includes:

10 x Ohaus 200g weights

10 x power supplies

4 x manuals

These scales also have the option to be operated with AA batteries

Max 300g

Model number- TA301

£ 850.00 (ex. VAT) 1 in stock

Beckman Coulter SX4250 Swinging Bucket Rotor 4500RPM w/ 4 Buckets Lab

ITEM-47197

Beckman Coulter SX4250 Swinging Bucket Rotor 4500RPM Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition but is untested.

Includes:

4 x Beckman Coulter 392252 SX4250 Centrifuge Rotor Buckets 250mL 4500RPM

Max RPM- 4500

£ 850.00 (ex. VAT) 1 in stock

Miele Mielabor G7733 Glassware Washer Lab

ITEM-41639

Miele Mielabor G7733 GlassWasher Lab

This item was removed from a university where it was surplus to requirements.

It powers on and completes a full wash cycle during testing, but is in poor cosmetic condition.

Please note; The top of the unit has rotted slightly due to its wooden construction, but it is purely cosmetic.

£ 840.00 (ex. VAT) 1 in stock

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab

ITEM-35288

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle

This was removed from a university lab where it was surplus to requirements.

Included are;

702 SM Titrino with remote.

The unit powers on and performs self-check.

703 Ti Stand

We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.

Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).

£ 840.00 (ex. VAT) 1 in stock

Sanyo MCO-15AC Lab Incubator Co2 Lab

ITEM-42716

Sanyo MCO-15AC Lab Incubator CO2 Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in complete working order.

Item supplied with three shelves.

It is in good cosmetic condition, however the door handle has been removed, the latch and seal remain in good working order.

£ 840.00 (ex. VAT) 1 in stock

AARIAC Model Clean Air CLR 20/30 S T UK Lab

ITEM-41805

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use.

Also included is the following:

Nardi Compressor - Dryer 400

Installed/Replaced - 23/11/23

£ 830.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab

ITEM-25464

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.

There are 6 Racks inside with drawers that hold 5ml tubes.

SPARES/REPAIR ITEM

£ 815.00 (ex. VAT) 1 in stock

Parker Balston Lab Gas Generator Model 74-5041-220 - Spares/Repair Lab

ITEM-35061

Parker Balston Lab Gas Generator Model 74-5041-220

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. However, many internal wires have been cut, rendering it unusable.

Therefore, it is sold as Spares/Repair.

£ 805.00 (ex. VAT) 1 in stock

ALC Multispeed Refrigerated Centrifuge PK 121 R + T515 4300rpm Rotor Lab

ITEM-16480

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works.

The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37.

The Rotor number displayed T515.

The Buckets Serial number is 0306/01.

The buckets Cat Number is 11210335.

The number on the bottom of the buckets is Ch. 007027 S.303.

The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435.

The ALC 2035 Adapter is for 50ml tubes.

£ 800.00 (ex. VAT) 1 in stock

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

ITEM-47241

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Sample Storage Racks.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs

ITEM-35813

This was removed from a university lab where it was surplus to requirements

THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.

It is sold for spares/repairs.

No rotor included.

£ 800.00 (ex. VAT) 1 in stock

Nuaire Laboratory CO2 Incubator Model NU-5500E Lab

ITEM-46363

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Julabo Recirculating Chiller Model: FLW1703GB Lab Spares/Repairs

ITEM-20313

This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. It has scratches and stains along its surface.

The unit powers up but requires a replacement compressor.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

$Image of Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab$

£ 800.00 (ex. VAT) 1 in stock

Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab

ITEM-46195

Oxford Cry Systems Crystal Diffractometer Cryostream Probe

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was not possible to test the functionality at our facility.

Includes:

Single crystal diffractometer cryostream probe

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Infors AEROTRON Shaker Incubator Lab Spares/Repairs

ITEM-39841

Infors AEROTRON Shaker Incubator

This was removed from a university lab where it was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

We think this unit would make for a great movie prop.

£ 800.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

£ 800.00 (ex. VAT) 1 in stock

Beckman Coulter Centrifuge Rotor Type 50.2 Ti Lab

ITEM-41839

Beckman Coulter Rotor Type 50.2 Ti

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Features:

Type - 50.2 Ti
Max RPM - 50,000
The Unit Has 12 x Slots For Vials
Only Use in Instruments Classified H, R, S

£ 800.00 (ex. VAT) 1 in stock

Beckman J-6B Refrigerated Ultracentrifuge w/ JS4.2 rotor & 6 x Buckets Lab

ITEM-47408

Beckman J-6B Refrigerated Ultracentrifuge with JS4.2 Rotor & 6 x Buckets

This item was removed from a university where it was surplus to requirements.

It is in good working order and in reasonably good cosmetic condition, with typical signs of age and use.

During testing, the unit achieved its maximum rated speed of 4200 rpm and was successfully temperature tested.

Includes:

JS4.2 rotor
6 x buckets
Various Beckman bucket adapters

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab

ITEM-47196

Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.

Therefore, it is listed as Spares/Repair.

£ 800.00 (ex. VAT) 1 in stock

Millipore Milli-Q Reference A+ Water Purification System Lab

ITEM-46833

Millipore Milli-Q Reference A+ Water Purification System Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 800.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab

ITEM-47240

GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Storage Racking.

£ 760.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

ITEM-37620

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

These were removed form a university lab where they were surplus to requirements.

The units are all in good working order.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

£ 750.00 (ex. VAT) 1 in stock

Eppendorf Model A-2-DWP Rotor 3,700 rpm 2 x Buckets Lab

ITEM-46921

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Includes:

2 x Swinging Buckets

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Beckman Optima LE-80K Centrifuge Spares/Repair Lab

ITEM-46445

Beckman Optima LE-80K Centrifuge Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.

Therefore, it is listed as Spares/Repair.

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs

ITEM-45166

New Brunswick Innova 44R Incubator Broken Shaker Lab

This item was removed from a university lab where it was surplus to requirements.

The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.

The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.

Due to the faulty shaker element, this item is listed as Spares/Repair.

Specifications:

Model: Innova 44R
Condition: Fair, requires repair for shaker motor
Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

ITEM-44775

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Specifications:

Model: SI60
Serial#: R000100205

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab

ITEM-23391

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with marks from use. All modules power up.

We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.

The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.

The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.

We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.

The system is made up of the following;

1 x Matrix Hydra II

Cat no. 109610

1 x Matrix 2 Position Stage

1 x Apogent Discoveries Matix Hydro Pump Module

The unit powers on with all 3 Fills working.

1 x Matrix P1 Control Box

1 x Innovadyne 1-Channel Nanofill

The unit powers up.

1 x Grant Instruments Type MS1

The unit powers up.

Dell Laptop with Microsoft Mouse

Model - PP04X

Hydra II-Plus-One Control Software Version 3.1.3 Installed

The unit powers up and the software runs.

Software Discs:

Matrix Hydra II-Plus-One Control Software Version 3.1.3

Matrix Hydra II-Plus-One Control Software Version 3.1.2

SuperLogics LE Software Suite Rev 2.9

2 x Socket Installation discs

Various tubing and accessories

Operating instructions

£ 750.00 (ex. VAT) 1 in stock

Audion AudionVac Digital VMS 133 Vacuum Sealing Machine

ITEM-47135

Audion AudionVac Digital VMS 133 Vacuum Sealing Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Includes;

User Manual
3 x Marble Platform

£ 750.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-40061

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.

It is in good cosmetic condition with minor marks.

It is supplied with;

MSE Rotor 43124-141

SN - 7962

Max RPM - 6000

4 x Buckets

4 x Beige Adaptors hold 1 x 50ml tube each

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

ITEM-35153

This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

The item powers on but is unable to be tested further without software.

The item is in a reasonable, used cosmetic condition with marks and scuffs.

It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)

£ 750.00 (ex. VAT) 1 in stock

Sorvall RT7 Plus Refrigerated Benchtop Centrifuge w/ RTH-250 Rotor Lab

ITEM-46642

Sorvall RT7 Plus Refrigerated Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition

Included:

1 x Sorvall RTH-250 Rotor

Maximum Speed: 3200 rpm
Rotor Mass:7 kg
Capacity:250 mL
Tube Dimensions: 61 x 124 mm or 45 x 135 mm

4 x Buckets PN 11053

2 x Adaptors (00438) Holds 4 x 50ml tubes

2 x Adaptors (00884) Holds 10 x 15ml tubes

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

General Laboratory

Filters