Our General Laboratory category offers a wide selection of high-quality, second-hand equipment designed to meet the diverse needs of laboratories. Specializing in essential lab tools such as balances, incubators, hot plates, and centrifuges, our range is ideal for research, educational, and industrial facilities.


Equipment undergoes varying levels of testing, including functionality checks, as well as temperature and CO2 performance assessments, ensuring reliable solutions for your laboratory’s daily operations and environmental control needs.

Items 751 to 800 of 995

Image of Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.


Therefore, it is listed as Spares/Repair.

Image of Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on. (Thermometer not included)


The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

Image of Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on. (Thermometer not included)


The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

Image of Hema-tek 2000 Slide Stainer Model - 4488A Lab

£ 500.00 (ex. VAT) 1 in stock

Hema-tek 2000 Slide Stainer Model - 4488A Lab

ITEM-30367

This Hema-tek 2000 Slide Stainer Model - 4488A was removed from a university lab where it was surplus to requirements.


The unit powers up and runs. The lab informed us that it had no known faults prior to removal.


It is in good cosmetic condition with minor marks from use.

Image of Thermo Scientific HERAfreeze ULT Freezer HFU 2185 Basic-41 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific HERAfreeze ULT Freezer HFU 2185 Basic-41 Lab Spares/Repairs

ITEM-42839

Thermo Scientific HERAfreeze HFU 2185 Basic-41 -80 Ultra Low Freezer Lab


This item was removed from a university lab where it was surplus to requirement.



The unit was described as "unreliable" prior to collection - it is sold for spares/repairs.



Specifications;


  • Model HFU 2185 Basic-41
  • Serial No. 020T-248264-0T
  • Capacity 572 litres

Image of Beckman Allegra X-22R  Benchtop Centrifuge Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Allegra X-22R Benchtop Centrifuge Spares/Repair Lab

ITEM-47198

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair


This item was removed from a university lab where it was surplus to requirement.


It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.


Therefore, this item is being sold strictly as Spares/Repair.


Includes:


Beckman Allegra X-22R unit only (no rotor or accessories included)

Image of Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor


This item was removed from a university laboratory where it was surplus to requirements.


It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.


Due to the faults listed above, this centrifuge is listed as Spares/Repair.


Includes:

  • 1x Jouan AG 290.G Swing Bucket Rotor
  • 4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
  • 1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
  • 4x 125 ml Tube Adaptors
  • 4x Support Feet

Image of Sorvall RC-28S Floor-Standing Centrifuge Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-28S Floor-Standing Centrifuge Spares/Repair Lab

ITEM-46923

Sorvall RC 28S Floor-Standing Centrifuge Spares/Repair Lab


This item was removed from a university lab where it was surplus to requirement.


It is in reasonably good cosmetic condition and powers on, however, testing could not be completed due to an on-screen error that prevented further operation, and prevented a vacuum from being drawn.


Therefore, it is listed as Spares/Repair.

Image of Gallenkamp IOI400.XX2.C Floor Standing Shaking Incubator Lab

£ 500.00 (ex. VAT) 1 in stock

Gallenkamp IOI400.XX2.C Floor Standing Shaking Incubator Lab

ITEM-12238

This Gallenkamp IOI400.XX2.C  Shaking Incubator was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested.


It was tested using a Thermo Smart-Vue gauge (not included).

The gauge showed 37.4ºC when the unit was set to 37ºC.

The gauge showed 59.8ºC when the unit was set to 60ºC (Max).


The max rpm is 400, which the unit runs fine at. The first digit of the rpm screen does have issues, but the rpm can still be set ok.


It is not a refrigerated unit.


Inner dimensions: 85.5cm L x 35cm W.

Shaker plate dimensions: 69cm L x 49cm W.


Image of Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor


This was removed from a university lab where it was surplus to requirements.


The unit powers up, but the display screen is faulty, therefore we were unable to test further.


It is in reasonably good cosmetic condition, with marks from use.


It is listed as Spares/Repairs.


Includes the following:


SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml


Image of Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab


This item was removed from a university lab where it was surplus to requirements.


It is in reasonably poor cosmetic condition with noticeable damage.


Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

Image of CI Electronics Sade P2 Checkweigher Weight Sorter Spares/Repair

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

CI Electronics Sade P2 Checkweigher Weight Sorter Spares/Repair

ITEM-46233

C1 Electronics Sade-P2 Automatic Tablet CheckWeigher


This item was removed from a university laboratory where it was surplus to requirements.


It powers on but displays a “Zero Failure” message immediately upon startup, accompanied by an alarm. This message cannot be cleared, and the unit cannot proceed to operation.


Therefore, it is listed as Spares/Repair.


It is in reasonably good cosmetic condition.

Image of Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 Lab Spares/Repairs

ITEM-30166

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit.


It is sold for Spares/repairs

Image of Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

ITEM-35616

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.


This item is in good cosmetic condition both internally and externally.


When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

Image of Brema Laboratory Ice Flaker Machine Model - GB 1555 A Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Brema Laboratory Ice Flaker Machine Model - GB 1555 A Spares/Repair Lab

ITEM-28134

Brema Laboratory Ice Flaker Machine Model GB 1555 A


This item was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition. However, it is leaking water due to a broken junction in the overflow-to-waste pipe.


As a result, it is listed as spares or repair.


Please note: This item was previously used in a laboratory setting and is not suitable for use in commercial catering. It should be used for laboratory purposes only.


Includes:

  • Operating manual

Internal dimensions: D46.5 × W67.5 × H57 cm

Image of Miele Professional G 7883 Laboratory Glassware Washer - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7883 Laboratory Glassware Washer - Spares/Repair Lab

ITEM-35870

Miele Professional G7883 Laboratory Glassware Washer


This item was removed from a university laboratory where it was surplus to requirements.


It is in reasonably good cosmetic condition, with a dent to the door corner and a missing front panel.

A low flow fault is present, caused by an internal component error unrelated to the water supply.


Therefore, it is listed as spares/repair.



Image of Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

ITEM-46918

Eppendorf 5810R BenchTop Centrifuge


This item was removed from a university laboratory where it was surplus to requirements.


The unit is in good cosmetic condition and powers on.


During testing, it failed to reach its maximum specified temperature of 40ºC.


Due to these issues stated above, this centrifuge is being sold as spares or repairs.

Image of New Brunswick Innova U725-G Ultra Low Temperature Freezer - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova U725-G Ultra Low Temperature Freezer - Spares/Repair Lab

ITEM-42838

New Brunswick Innova U725-G Ultra Low Temperature Freezer Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and powers on, however during testing it failed to drop below 2ºc when set to its minimum of -86ºc.


Therefore, it is listed as Spares/Repair.


Specifications;

  • Model U725-86G
  • Capacity 727 litres
  • Serial No. 1016-0976-1111

Image of VWR PCR Plate Centrifuge II Lab

£ 500.00 (ex. VAT) 1 in stock

VWR PCR Plate Centrifuge II Lab

ITEM-49516

VWR PCR Plate Centrifuge II Lab


This item is sold on behalf of a client where it is surplus to requirements.


This item is in complete working order, and in good cosmetic condition.


The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Image of Ohaus Frontier Micro Centrifuge FC5513 Lab

£ 500.00 (ex. VAT) 1 in stock

Ohaus Frontier Micro Centrifuge FC5513 Lab

ITEM-49518

Ohaus Frontier Micro Centrifuge FC5513 Lab


This item is sold on behalf of a client where it is surplus to requirements.


This item is in complete working order, and in good cosmetic condition.


The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Image of Fisherbrand F-UVCABMINI Mini UV Sterilization Cabinet Lab

£ 500.00 (ex. VAT) 1 in stock

Fisherbrand F-UVCABMINI Mini UV Sterilization Cabinet Lab

ITEM-47444

Fisherbrand F-UVCABMINI Mini UV Sterilization Cabinet Lab


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition and in good working order.


Manual is included.

Image of Windley Bros Heavy Duty Isolation Anti Vibration Table

£ 500.00 (ex. VAT) 1 in stock

Windley Bros Heavy Duty Isolation Anti Vibration Table

ITEM-42830

Windley Bros Heavy Duty Isolation Anti Vibration Table


This item was removed from a university lab where it was surplus to requirements.


It is in reasonably poor cosmetic condition with surface rust present. We are unable to test it at our facility.


This anti-vibration table is constructed from cast iron and steel.  The frame comprises angle iron legs with steel bar bracing, supporting a cast iron base.


Working height: 93cm.

Solid steel tabletop: 102 x 76 x 1.2cm



Image of Grant FH15 Flow Heater and FC20 Flow Cooler Lab

£ 500.00 (ex. VAT) 1 in stock

Grant FH15 Flow Heater and FC20 Flow Cooler Lab

ITEM-42784

Grant FH15 Flow Heater and FC20 Flow Cooler


This system was removed from a university laboratory where it was surplus to requirements.


The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.

The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.


These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.

It is in good cosmetic condition.


Includes:

  • Grant FH15 Flow Heater (Serial No. 72311)
  • Grant FC20 Flow Cooler (Serial No. 72311)

  • Model: FH15 / FC20
  • Serial No.: 72311

Image of Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E No Blade

£ 500.00 (ex. VAT) 1 in stock

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E No Blade

ITEM-42796

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition, powers on and is in good mechanical order. We are unable to test it further at our facility.


Please note; There is no blade present on the cutting arm.

Image of Binder CB 150 Incubator - Spares/Repair Lab

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and has been successfully temperature tested, however it does not produce CO2.


Therefore, it is listed as Spares/Repair.

Image of NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition with minor marks.

Image of Grant SBB Aqua 12 Plus Water Bath Lab

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath


This item was removed from a university laboratory where it was surplus to requirements.


The water bath is in good cosmetic condition, with some light wear below the waterline.


It powers up and is in good working order (thermometer not included).


Specifications.

  • Model: SBB Aqua 12 Plus
  • Serial No.: MJ1028005
  • Capacity: 12 litres
  • Features: Clear polycarbonate lid

Image of Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT


This was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition with minor marks

Image of Lab-Bubble Still Air PCR Enclosure - Black  BUB-PCR-SA-BLK

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black  BUB-PCR-SA-BLK


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.



Image of Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition with minor marks.



Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Image of Elga Model: PURELAB FLEX Water Purification System Lab

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.


We were unable to test the unit as it was not supplied with the PSU


Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.


Image of Unbranded Laboratory Microscope Vibration Isolation Platform Lab

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.


The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.


Size not taking into account the shape - L45 X W60 X H7.5cm




Image of Thermo Scientific TX-1000 Swinging Bucket Rotor 4200rpm Lab

£ 450.00 (ex. VAT) 1 in stock

Thermo Scientific TX-1000 Swinging Bucket Rotor 4200rpm Lab

ITEM-48330

Thermo Scientific TX-1000 Swinging Bucket Rotor


This item was removed from a university lab where it was surplus to requirements.


It is in excellent cosmetic condition. No buckets are included with this rotor.


Specifications:

  • Max RPM: 4200
  • Model: TX-1000
  • Item Number: 75003017

The lab confirmed it was in working order prior to removal.

Image of Heraeus BB 16 Function Line CO2 Incubator Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator


This was removed from a university lab where it was surplus to requirements.


The system has been professionally serviced and is in full working order. A report is available on request.


It is in good cosmetic condition with minor marks.

Image of Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.


Specifications;

  • Model: BB 6220 CUO2
  • SN: 94109551
  • Internal dimensions: D56 W65 H66cm
  • 6 Doors with 6 Shelves: 50 x 26cm

Image of  Liquid Nitrogen Tank Dewar Trolley

£ 450.00 (ex. VAT) 1 in stock

Liquid Nitrogen Tank Dewar Trolley

ITEM-46992

Dual Liquid Nitrogen Tank Trolley


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition.

Image of 6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg

£ 445.00 (ex. VAT) 1 in stock

6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg

ITEM-36492

6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg


These were removed from a working lab where they were surplus to requirements.


All are in good cosmetic condition with minor marks.


Included are


Mettler Toledo F2 100g

Serial#: B128168752


Mettler Toledo F1 200g

Serial#: 132554


Troemner 200g

Serial#: 76359


Fisherbrand F1 1kg

Serial#: 06-J14833-12


Mettler Toledo F2 1kg

Serial#: B128168753


Mettler Toledo F1 1kg

Serial#: 158691


Image of Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab

£ 435.00 (ex. VAT) 1 in stock

Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab

ITEM-29721

This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed.


It is in reasonably good cosmetic condition with minor marks from use.



Image of RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 435.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab

ITEM-35168

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.


The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.


It is in good cosmetic condition with minor marks from use.


3 Shelves - 52 x 42.5cm

Image of Grant JBN 12 Water Bath 12 Litres Lab

£ 425.00 (ex. VAT) 1 in stock

Grant JBN 12 Water Bath 12 Litres Lab

ITEM-43037

Grant JBN 12 Water Bath 12 Litres Lab


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition and in good working order.


  • Model - JBN12
  • S/N - U41913001

Image of MVE XLC 230 Liquid Nitrogen Dewar Lab

£ 425.00 (ex. VAT) 1 in stock

MVE XLC 230 Liquid Nitrogen Dewar Lab

ITEM-29731

MVE XLC 230 Liquid Nitrogen Dewar


This was removed from a university lab where it was surplus to requirements.


The unit is in reasonable cosmetic condition with marks from use but has not been tested.


It comes with 6 storage racks each with 8 draws.


Internal Dimensions are: D70cm x W40cm.


Image of GeneChip Model 450/400 Fluidics Station Lab

£ 420.00 (ex. VAT) 1 in stock

GeneChip Model 450/400 Fluidics Station Lab

ITEM-45032

GeneChip Fluidics Station 450/400


This item was removed from a university lab where it was surplus to requirements.


The system is in good cosmetic condition with all dispensers powering on.


The previous client has stated it was in working order prior to removal.


Further testing could not be completed due to the absence of required software.

Image of Schutt Homgen Type 3.200 011 Homogeniser Lab

£ 420.00 (ex. VAT) 1 in stock

Schutt Homgen Type 3.200 011 Homogeniser Lab

ITEM-34580

This Schutt Homgen Type 3.200 011 Homogeniser was removed from a university lab where it was surplus to requirements.


The unit powers up and the chuck turns but there is no tool attached. It is in good working order.


It is in reasonable cosmetic condition but has some marks and rust from age.

Image of CIF Automatic Silent Air Compressor - S.A. 15EXPORT CA - SA 15

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 415.00 (ex. VAT) 1 in stock

CIF Automatic Silent Air Compressor - S.A. 15EXPORT CA - SA 15

ITEM-20155

This CIF Automatic Silent Compressor SA 15 was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in full working order. It cycles in and out correctly.


It is in reasonably good cosmetic condition but the pressure gauge is missing its plastic window.


Image of GeneChip Fluidics Station Model 450/400 Lab

£ 415.00 (ex. VAT) 1 in stock

GeneChip Fluidics Station Model 450/400 Lab

ITEM-45031

GeneChip Fluidics Station 450/400


This item was removed from a university lab where it was surplus to requirements.


The system is in good cosmetic condition with all dispensers powering on.


The previous client has stated it was in working order prior to removal.


Further testing could not be completed due to the absence of required software.

Image of Oxford Cryosystems Model 600 Series Cryostream Cooler Controller Lab

£ 410.00 (ex. VAT) 1 in stock

Oxford Cryosystems Model 600 Series Cryostream Cooler Controller Lab

ITEM-39921

This Oxford Cryosystems 600 Series Cryostream Cooler Controller was removed from a university lab where it was surplus to requirements.


The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Image of GeneChip Fluidics Station Type 450 Lab

£ 410.00 (ex. VAT) 1 in stock

GeneChip Fluidics Station Type 450 Lab

ITEM-45030

GeneChip Fluidics Station 450/400


This item was removed from a university lab where it was surplus to requirements.


The system is in good cosmetic condition with all dispensers powering on.


The previous client has stated it was in working order prior to removal.


Further testing could not be completed due to the absence of required software.


Image of Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1  x TC001 Lab

£ 410.00 (ex. VAT) 1 in stock

Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1 x TC001 Lab

ITEM-47410

Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1 x TC001 Lab


This item was removed from a university laboratory where it was surplus to requirements.


The unit powers on as it should and is in good used cosmetic condition. There are various marks from general use and some slight rusting at the rear, typical for water-based equipment.


The previous owner has stated it was in working order prior to removal.


Includes:

  • 1 x PSU
  • 2 x TC004 POU Endotoxin Filters (1 used, 1 sealed)
  • 1 x TC001 Pre-Treatment Module (appears unused)

Run Hours:

  • TC001 hours: 743h
  • TC002 DI hours: 762h
  • TC003 UV lamp hours: 38,680h
  • TC009 UP (LH) hours: 2,270h

Image of Stuart SSL4 See-Saw Rocker Lab

£ 400.00 (ex. VAT) 1 in stock

Stuart SSL4 See-Saw Rocker Lab

ITEM-47403

Stuart SSL4 See-Saw Rocker Lab


This item was removed from a facility where it was surplus to requirements.


It is in good cosmetic condition and in good working order.


The lab confirmed it was in good working order prior to removal.

Image of Texol Nitro Generator  Model - NG1 T/S Lab Spares/Repairs

£ 400.00 (ex. VAT) 1 in stock

Texol Nitro Generator Model - NG1 T/S Lab Spares/Repairs

ITEM-24405


Texol Nitro Generator  Model - NG1 T/S


This was removed from a university lab where it was surplus to requirements.


The unit does not power up and is sold for spares/repairs.

Items 751 to 800 of 995

Filters

Price (£)

to

Condition