General Laboratory

£ 305.00 (ex. VAT) 1 in stock

Glotech GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor Lab

ITEM-23307

This GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 4000rpm.

It is in reasonably good cosmetic condition with some marks from use.

Rotor - GRS-S-50-4

Max rpm 4k

Max rcf 2700xg

4 x GLB-10 Swinging buckets fits 15ml tubes

£ 300.00 (ex. VAT) 1 in stock

Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank Lab

ITEM-29811

This Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use.

Capacity: 60 litre

Build year: 1995

£ 300.00 (ex. VAT) 1 in stock

Job Lot of Freezer Racking Sanyo/Denleystor

ITEM-44781

Total number needed

£ 300.00 (ex. VAT) 1 in stock

Cell Bank Fersht Group Dewar Lab

ITEM-44611

Cell Bank Fersht Group Dewar Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic, but we are unable to test it further at our facility.

Also included:

6 x Container Sample Racks

1 x Skate on Wheels

£ 300.00 (ex. VAT) 1 in stock

IKA Roller 10 Digital Lab Spares/Repairs

ITEM-36754

This IKA Roller 10 Digital was removed from a university lab where it was surplus to requirements.

The unit powers up with a 24V DC supply (not included).

Error 4 is displayed a few seconds after starting a run - 'Motor blockage or overload'. We followed the troubleshooting part of on online manual, but were unable to clear the error.

It is in otherwise good cosmetic condition with marks from use.

It is sold for spares/repairs.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge 13 Centrifuge Lab

ITEM-37826

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.

We are unable to test this item further at our facility.

18 sample holders.

£ 300.00 (ex. VAT) 1 in stock

Beckman JA-20 20,000 RPM Centrifuge Rotor Lab

ITEM-26437

This Beckman JA-20 20,000 RPM Centrifuge Rotor was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition but does have marks from use.

It has not been tested and will need to be inspected for safety by a qualified technician before it can be used again.

It fits 20ml sample tubes.

£ 300.00 (ex. VAT) 1 in stock

LEC+ No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46685

LEC+ No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 300.00 (ex. VAT) 1 in stock

FisherBrand Precision Series FPRS2202 Balance Lab

ITEM-46486

FisherBrand Precision Series FPRS2202 Balance Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order. (Calibration weight not included.)

The power supply is included.

£ 300.00 (ex. VAT) 1 in stock

Granite Topped Isolation Table - Removed from Zeiss Confocal System Lab

ITEM-45160

Granite Topped Isolation Table - Removed from Zeiss Confocal System Lab

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition. We are unable to test it further at our facility.

It was removed from a LSM510 Confocal System and was made bespoke to fit a Zeiss Axiovert 200M Microscope.

Table-top Dimensions:

72cm L x 54cm W.

£ 300.00 (ex. VAT) 1 in stock

MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab

ITEM-36610

MSE Falcon 6/300 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.

This item also includes the following:

1 x Mistral MSE Rotor - 43124

Capacity: 4 x 750ml
SN: 986766
Max RPM: 2500
(There are no rotor buckets included)

£ 300.00 (ex. VAT) 1 in stock

Liebherr MediLine LKUexv 1610 Fridge Lab

ITEM-47349

Liebherr MediLine LKUexv 1610 Fridge Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

£ 300.00 (ex. VAT) 1 in stock

BOC Cryoproducts Liquid Nitrogen Dewar with Trolley

ITEM-46786

BOC Cryoproducts Liquid Nitrogen Dewar with Trolley

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 290.00 (ex. VAT) 1 in stock

LEC+ ISU1111 Laboratory Medical Freezer Lab

ITEM-46682

LEC+ ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 290.00 (ex. VAT) 1 in stock

Liebherr LKUv Model 1610 MediLine Fridge Lab

ITEM-47353

Liebherr LKUv Model 1610 MediLine Fridge Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

NEW ITEM

£ 285.00 (ex. VAT) 1 in stock

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems

ITEM-39679

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems

This was removed from a university lab where it was surplus to requirements.

The unit is brand new an unused.

The box contains the following;

Organic Adsorption Cartridge x2

Part#: UHQ-1

Ion Exchange Cartridge x2

Part# UHQ-2

£ 285.00 (ex. VAT) 1 in stock

LEC+ Model ISU1111 Laboratory Medical Freezer Lab

ITEM-46683

LEC+ Model ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 280.00 (ex. VAT) 1 in stock

Clifton Water Bath NE2-28D Lab

ITEM-48312

Clifton Water Bath NE2-28D Lab

This item was removed from a facility where it was surplus to requirement.

It powers on and is in good working order.

It is in good cosmetic condition, but the lid handle has broken, this does not affect its functionality.

£ 280.00 (ex. VAT) 1 in stock

LEC+ Model No. ISU111S Medical Freezer Laboratory

ITEM-46680

LEC+ Model No. SU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 270.00 (ex. VAT) 1 in stock

J. Bibby Water Still Model W14S Lab

ITEM-38416

J. Bibby Water Still Model W14S

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Serial No. W14S 85/1168

£ 270.00 (ex. VAT) 1 in stock

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46679

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 255.00 (ex. VAT) 1 in stock

Thermo Scientific Precision GP 10 with Bath Beads (2021) Lab

ITEM-48315

Thermo Scientific Precision GP 10 with Beads Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

The lab confirmed it was in good working order prior to removal

£ 255.00 (ex. VAT) 1 in stock

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46672

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 250.00 (ex. VAT) 1 in stock

Thermo Scientific Precision GP 10 with Beads (2020) Lab

ITEM-48314

Thermo Scientific Precision GP 10 with Beads Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

The lab confirmed it was in good working order prior to removal

£ 250.00 (ex. VAT) 1 in stock

Mettler Toledo SevenCompact Duo pH/ Conductivity w/ P25 Printer Lan

ITEM-48325

Mettler Toledo SevenCompact Duo pH/Conductivity with P25 Printer

This item was removed from a facility where it was surplus to requirements.

All the included units power on and are in good cosmetic condition.

Includes:

SevenCompact Duo (powers on, 12VDC power supply included)
P25 Printer (powers on, 24VDC power supply included)
Probe Stand
InLab Expert Pro-ISM
InLab 731

The lab confirmed the system was in good working order prior to removal.

£ 250.00 (ex. VAT) 1 in stock

VWR 2L Water Bath Lab 462-0554 Lab

ITEM-46508

VWR 2L Water Bath Lab 462-0554 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 250.00 (ex. VAT) 1 in stock

Wentworth Laboratories Model AVT 701 Vibration Isolation Table Lab

ITEM-42971

Wentworth Laboratories Model AVT 701 Vibration Isolation Table Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, with wear and rust present.

Specifications:

Model No. - AVT 701
S/N - 1495

£ 250.00 (ex. VAT) 1 in stock

Sorvall F-28/50 Rotor 28,000 Max RPM lab

ITEM-46925

Sorvall F-28/50 Rotor 28,000 Max RPM lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, it has not been tested at our facility.

£ 250.00 (ex. VAT) 1 in stock

Techne MCS-102L Biological Stirrer with 2 x 500ml Spinner Flasks

ITEM-42234

Techne MCS-102L Biological Stirrer with 2 x 500ml Spinner Flasks

£ 250.00 (ex. VAT) 1 in stock

Union Carbide Liquid Nitrogen Dewar Lab

ITEM-46114

Union Carbide Liquid Nitrogen Dewar

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility.

Includes:

4x inner rackings

Issues:

Missing 2 inner rackings; should be 6 but only 4 are included.

£ 250.00 (ex. VAT) 1 in stock

2 x Roller Incubator Shelves For Wheaton 753684-D Incubator

ITEM-46152

2 x Roller Incubator Shelves For Wheaton 753684-D Incubator

These items were removed from a university lab where they were surplus to requirement.

Both shelves are in good cosmetic condition.

£ 250.00 (ex. VAT) 1 in stock

Heraeus HFA 15.2 Rotor For Centrifuge Lab

ITEM-41488

Heraeus HFA 15.2 Rotor For Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition but has not been tested.

Model: HFA 15.2
Holds: 18 x 2 ml tubes

£ 250.00 (ex. VAT) 1 in stock

Stuart SB 161-3 Magnetic Stirrer 3-Position Lab

ITEM-39102

Stuart SB 161-3 Magnetic Stirrer 3-Position

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 250.00 (ex. VAT) 1 in stock

Cytiva VIA Thaw MD1000 Dry Automated Thawing Machine Lab

ITEM-45308

Cytiva VIA Thaw MD1000 Dry Automated Thawing Machine

This item was removed from a university lab where it was surplus to requirements.

It powers on and is in very good cosmetic condition, still in its original packaging.

Included Components:

VIA Thaw MD1000 Operator Manual
VIA Thaw MD1000 Clue Card
VIA Thaw MD1000/VIA Thaw L1000 Thawing Tray Assembly

Specifications:

Model: VIA Thaw MD1000
Serial No.: TBM0920201

Note: Item was temperature-tested for thawing functionality (thermometer not included).

£ 250.00 (ex. VAT) 1 in stock

IKA-Labortechnik Ultra-Turrax T25 S7 Laboratory Homogeniser

ITEM-45363

IKA-Labortechnik Ultra-Turrax T25 S7 Laboratory Homogeniser

This item was removed from a university laboratory where it was surplus to requirements.

The homogeniser powers on and operates smoothly across all speed settings. The speed control functions as intended, with no issues observed.

It is in reasonably good cosmetic condition, with marks from use.

Homogeniser teeth not included.

Specifications.

Model: T25 S7
Serial No.: 682708
Minimum Speed: 8000 RPM
Maximum Speed: 24000 RPM

NEW ITEM

£ 250.00 (ex. VAT) 1 in stock

Starlab Dry Bath Mono N2400-4001 Block Heater Lab

ITEM-42335

Starlab Dry Bath Mono N2400-4001 Block Heater

This item was removed from a university lab where it was surplus to requirement.

It is brand new and in its original packaging.

The PSU & User Manual is included.

Specifications:

Model: N2400-4001
Serial No. 201104001
Max temperature 150˚C
Timer 0 - 999 minutes
RS 232 data logger

£ 250.00 (ex. VAT) 1 in stock

Union Carbide Super 30A Nitrogen Dewar Lab

ITEM-46116

Jencons Scientific LTD Super 30A Nitrogen Dewar

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility.

Includes:

Skate for item
6x Inner Rackings

£ 250.00 (ex. VAT) 1 in stock

Wentworth Laboratories Model 701 Vibration Isolation Table Lab

ITEM-30552

This Wentworth Laboratories Model 701 Vibration Isolation Table was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks and some light rusting. It has not been tested.

Plate on top dimensions - 61 x 41cm

£ 250.00 (ex. VAT) 1 in stock

Wentworth Laboratories Model AVT701 Vibration Isolation Table Lab

ITEM-30553

Wentworth Laboratories Model AVT701 Vibration Isolation Table

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition but has marks from use. It has not been tested.

Plate on top dimensions - 68 x 49.5cm

Whole table dimensions - 90x63x75cm LWH

£ 250.00 (ex. VAT) 1 in stock

Mettler Toledo 20KG M1 Class Calibration Weight Lab

ITEM-31058

Mettler Toledo 20KG M1 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has been cracked slightly.

£ 250.00 (ex. VAT) 1 in stock

Mettler Toledo M1 Class 20KG Calibration Weight 11117725 Lab

ITEM-31754

Mettler Toledo 20KGF2 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks and cracks from use. The top of the case is broken.

£ 250.00 (ex. VAT) 1 in stock

Mettler Toledo 20KG Calibration Weight M1 Lab

ITEM-31756

Mettler Toledo 20KG M1 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks from use.

£ 250.00 (ex. VAT) 1 in stock

Mettler Toledo F2 Class 20KG Calibration Weight 11118212 Lab

ITEM-31757

Mettler Toledo 20KGF2 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks from use.

£ 250.00 (ex. VAT) 1 in stock

Mettler Toledo 20KG Calibration Weight M1 Class 11117725 Lab

ITEM-31755

Mettler Toledo 20KGF2 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition, but the case has marks and cracks from use.

£ 250.00 (ex. VAT) 1 in stock

LEC+ Type ISU1111 Laboratory Medical Freezer Lab

ITEM-46671

LEC+ ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 250.00 (ex. VAT) 1 in stock

SLS Lab Pro FZ-2000i EC Balance Scales With AnD Multi-Printer Lab

ITEM-47005

SIS Lab Pro SZ-2000i Balance Scales With AnD Multi-Printer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in goods working order. (Calibration weights not included.)

The AnD multi-printer has also been tested and is fully operational, with successful test prints confirmed directly from the balance.

£ 250.00 (ex. VAT) 1 in stock

Sorvall F-28/50 Rotor 28,000rpm Lab

ITEM-46643

Sorvall F-28/50 Rotor 20,000rpm Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, and remains untested.

Specifications;

Angle: 34º

Speed: up to 28,000 rpm

10 places for (Ø) x (H) 2,9 x 10,3 cm tubes with a capacity of 50 ml.

The F-28/50 rotor is autoclavable at 121°C

£ 250.00 (ex. VAT) 1 in stock

Liebherr MediLine LGUex 1500 Freezer Lab

ITEM-47347

Liebherr MediLine LGUex 1500 Freezer Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

The lab confirmed this was in full working order prior to removal.

Includes;

Set of Keys.

£ 250.00 (ex. VAT) 1 in stock

Stainless Steel Table on Castors 120x85x72cm (LxWxH)

ITEM-46789

Stainless Steel Table on Castors 120x85x72cm (LxWxH)

This item was removed from a university where it was surplus to requirement.

It is in good used cosmetic condition.

£ 230.00 (ex. VAT) 1 in stock

Hettich E1547 Lab Centrifuge Rotor 48 x 3g, 1136, 13000 RPM

ITEM-09570

This rotor was removed from a lab during a clearout.

We have not tested the rotor so it will need to be checked and tested prior to use in your centrifuge.

General Laboratory

Filters