General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

ITEM-46918

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Additional, although it received a good report in a recent centrifuge service, the client noted that with frequent use the unit overheats and displays error messages related to overloading.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

£ 500.00 (ex. VAT) 1 in stock

Kedee KD-2258 Rotary Microtome Lab

ITEM-46916

Kedee KD-2258 Rotary Microtome

This item was removed from a university lab where it was surplus to requirement.

It's in good cosmetic condition and in good mechanical order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

PolyScience 6705 Refrigerated Circulator Spares/Repair

ITEM-46442

PolyScience 6705 Refrigerated Circulator

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good cosmetic condition. However, it does not circulate antifreeze, and the unit failed to reach full cooling performance, only achieving a minimum temperature of 6.0°C.

Internal inspection revealed significant corrosion on the elements.

Due to these faults, this item is listed as spares or repair.

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

ITEM-46240

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

This item was removed from a laboratory where it was surplus to requirements.

The shaker powers on and operates at the maximum RPM of 400. It is in reasonably good cosmetic condition.

Model: AK-82

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker Lab

ITEM-46239

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

This item was removed from a laboratory where it was surplus to requirements.

The shaker powers on and operates at the maximum RPM of 400.

It is in poor cosmetic condition.

Model: AK-82

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs

ITEM-42198

Beckman Optima L-60 Floor Standing Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition.

However, the display is not functioning correctly, showing only two dots in the TIME-HR-MIN and one dot in TEMP-°C.

Due to these issues, it is listed as Spares/Repair.

There is no rotor included.

Specifications:

Speed: 1,000 - 60,000 rpm
Temperature: 0°C - 40°C

Model: Optima L-60 Serial No.: L1M602

Rotational Counter: 417,132 x 10,000 rotations

£ 500.00 (ex. VAT) 1 in stock

Buchi Rotavapor R-3 w/ R-3 HB Water Bath Lab

ITEM-45189

Buchi Rotavapor R-3 w/ R-3 HB Water Bath Lab

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

Condenser not included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer 'Spares/Repair'

ITEM-42303

Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered it displays a persistent "Wrong Power" warning with irregular compressor activity and fails to cool.

Therefore, it is listed as Spares/Repair.

Specifications.

Model: Forma 906
Serial#: 812688-2375
Year: 2009

£ 500.00 (ex. VAT) 1 in stock

Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank

ITEM-34584

This Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank was removed from a university lab where it was surplus to requirements.

The unit appears to be in good condition, but it has not been tested.

Last service date: 06/10/2021.

Internal dimensions: 21cm x 60cm.

Capacity: 6 racks, 6000 2ml vials.

£ 500.00 (ex. VAT) 1 in stock

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

ITEM-46200

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

Jouan S40 Swing-Out Rotor w/ 4 x Buckets & Inserts.
Max Load: 2kg
Max RPM: 4300

£ 500.00 (ex. VAT) 1 in stock

Envair Bio 2+ Plus Class 2 Microbiological Safety Cabinet Lab

ITEM-31185

This Envair Bio 2 Class 2 Microbiological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

The unit powers up and the airflow and light is working. The UV is not working.

Cabinet dimensions - D70 W125 H139cm

Frame dimensions - D61 W122 H83cm

Internal workspace dimensions - D56 W106 H71cm

The item is in a reasonable, used cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Sanyo Incubator Model-MIR162 Lab

ITEM-46408

Sanyo Incubator Model-MIR162 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Taylor Wharton Liquid Nitrogen Dewar Model - LS3000 Lab

ITEM-41552

Taylor Wharton Liquid Nitrogen Dewar Model - LS3000 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 Vintage Microtome Knives With Sharpening strops and Whetstones

ITEM-42018

Job Lot of 13 Vintage Microtome Knives With Sharpening Strops and Whetstones

These items were removed from a university lab, where they were surplus to requirement.

The knife blades are all in very good condition, with sharp and undamaged cutting edges, appearing to have been well maintained, except for the hand knife, which has a poor cutting edge.

The wooden boxes are in excellent condition, except for two that are damaged.

The lot comprises:

3 x Shandon Nothung C wedge shape 20cm blades (circa 1967) in box
1 x Shandon Northung A concave 25cm blade (circa 1967) in box
1 x Unidentified C wedge 18cm blade in box
3 x MSE Ltd No. 9057.W wedge 9cm blades in box
2 x Cambridge Instruments rocking microtome knives (10cm blades) in box
1 x Unidentified wedge 8cm blade in leather case
1 x Hand knife with handle in poor condition in box
4 x Leather sharpening strops (30-35cm long), 2 in box
2 x 15cm whetstones
1 x Acrylic 15cm sharpener
1 x 25cm blade holder
3 x 20cm blade holders
1 x 17cm blade holder

£ 500.00 (ex. VAT) 1 in stock

HasKris Recirculating Chiller S/n HA007835 Lab Spares/Repairs

ITEM-37147

This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further at our facility.

It is in good cosmetic condition, with some marks from use.

Some of the components have been removed, it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab Spares/Repairs

ITEM-46058

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonable condition and powers on, however there's a fault with the lock mechanism that prevents the lid from opening.

Therefore, further testing could not be conducted and it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell Hearson MN2950 Autoclave Lab Spares/Repairs

ITEM-20667

This was removed from a university lab where it was surplus to requirements.

It is sold for spares/repairs as the wiring has been deemed unsafe.

£ 500.00 (ex. VAT) 1 in stock

Kryo Planer Biomed 10 Series System Lab Spares/Repairs

ITEM-37143

Kryo Planer Biomed 10 Series System

This system was removed from a university where it was surplus to requirement.

The system failed PAT on insulation. It is sold for spares/repairs.

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 series Controller Key

All units listed above power on and are in good cosmetic condition, neither have been tested further at our facility.

1x LNP4 Planer freezer Pump:

Model LNP4 13181

This item is in reasonably good cosmetic condition, but due to it requiring a separate power supply, we are unable to test it at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37792

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university lab where it was surplus to requirements.

The burner is in good cosmetic condition. However, the burner control screen has come apart from the control panel and is possibly broken. No testing has been carried out.

Due to the inability of testing and damaged control screen, this item is listed as Spares/Repair.

Specifications:

Model: LPN3/2051
Serial No.: 01333
Manufactured: 11.09.15
Output: 2051 KW/hr (7.0 MBtu/hr)

Includes:

Dungs Gas Train Valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter
Autoflame Combustion Management System:
Part Nos.: MM10005, MM10004
Serial Nos.: 20368, 051771
TEC Fan Motor:
5.5KW 415 volt
Type: 5.523TECAB35-IE3
T3A 13251-2
Gas Inlet Pipe: 2.5"

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

ITEM-39828

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

These items were removed from a university where they were surplus to requirement.

All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.

Therefore, this listing is sold as Spares/Repair.

All items included are as follows:

Model1#: CR21 Controller

Serial1#: 10521389

Model2#: CR21 Transformer Box

Serial2#: 10521391

Model3#: CR21 Cryochamber

Serial3#: 10521390

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VAC HE-63-P PEDATROL GloveBox Lab Spares/Repairs

ITEM-41335

VAC HE-63-P PEDATROL GloveBox Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs.

Also includes the following:

- Components for the machine

- Tubing

- Pipes

- Automatic Dewpoint Meter

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

SG Ultra Clear TUF UV Ultrapure Water System With Permeate Tank Lab

ITEM-41441

SG Ultra Clear TUF UV Ultrapure Water System With Permeate Tank

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was not in working order but were unable to confirm the fault. It is sold for spares/repairs

Included with the system is the following:

Permeate Tank

Cartridge Polisher
P/N- TR-2051

DI Cartridge
P/N- TR-2050

Carbon Pre-Filter
P/N- TR-2057

Carbon Pre-Filter (expired)
P/N- TR-2057

DI Cartridge (expired)
P/N- TR-2050

User Manual

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator Lab

ITEM-41459

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator

All items are in good cosmetic condition with minimal wear

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

£ 500.00 (ex. VAT) 1 in stock

Laboratory Isolation Table - White Lab

ITEM-41681

Isolation Table - White Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Spares/Repairs

ITEM-36885

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonable, used cosmetic condition.

The centrifuge was tested at a high spin rate and achieved approximately 1650rpm. Temperature control tests were performed; the system failed to reach the set temperatures of -20˚C and 37˚C, only stabilizing around 20˚C.

Due to the temperature faults experienced during testing, this item is listed as Spares/Repair.

Includes:

Cart/stand: Dimensions L78 x W70 x H73 cm
4 x swinging buckets
2 x adaptors for 12 x 15ml tubes each
2 x adaptors for 50 x 0.5ml tubes each
2 x adaptors for 32 x 1.5ml tubes each (PN-10-5043)

Specifications.

Model: HT4 Series 2
Serial No.: 5794

This system does not include a vacuum pump.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab Spares/Repair

ITEM-45126

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

The item powers on and is in a reasonable used cosmetic condition.

It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom.

During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.

Therefore, it is listed as Spares/Repair and no further testing was conducted.

Specifications:

Model: U570 -86
Serial No.: 1004-5204-1103

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with CO2 leaking.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Refrigerated Centrifuge 5804 R Lab Spares/Repairs

ITEM-41484

Eppendorf Refrigerated Centrifuge 5804 R Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore we are unable to test it further, and it is listed as Spares/Repair.

The control board is faulty, and is loose inside the chamber.

There is no rotor.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge Lab Spares/Repairs

ITEM-45431

Eppendorf 5804 R Centrifuge Lab

This item was removed from a university where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. However, it displays "Error 14," indicating an electrical fault, and also has a faulty lid locking mechanism.

Due to both errors listed above, this item is listed as Spares/Repair.

Specifications:

Model: 5804 R
Serial No.: 5805CI964308

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer Lab

ITEM-41127

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has no screen and required a new CO2 sensor prior to the screen being removed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Biofuge 22R Centrifuge Lab Spares/Repairs

ITEM-35675

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

ITEM-35616

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition both internally and externally.

When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge w/ S40 Rotor Lab

ITEM-45413

Jouan B4i Benchtop Centrifuge with S40 Rotor

This item was removed from a university where it was surplus to requirements.

The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit.

It is in fair cosmetic condition, showing signs of general use.

Includes:

S40 Swinging bucket rotor with 4 buckets
4 additional buckets
12 x bucket inserts

Specifications:

Model: B4i
Serial No.: 30202056
Maximum RPM: 14,000 (unit); 4,300 (rotor)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

This item does not power on, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

ITEM-39999

Sanyo MCO-18AIC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

Features 3 Shelves.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000i Benchtop Centrifuge Lab Spares/Repairs

ITEM-37436

MSE Mistral 3000i Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature.

Additionally included:

1 x MSE Rotor

Model BS4402

7 x Swinging Buckets:

Volume: 250ml

Bucket Adaptors:

6 x Blue

Holds: 12x 5ml Vials

7 x Grey

Holds: 4 x 12ml Vials

8 x MSE Brown

Holds: 1 x 100ml VIals

1 x Hex Key Locking Bar

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

ITEM-39052

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors AG HT Ecotron Shaking Incubator Lab Spares/Repairs

ITEM-39829

Infors AG HT Ecotron Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator is in reasonably good cosmetic condition, both internally and externally.

It powers on successfully, with display screens, buttons, and interior lights in working order. While the shaker motor can be heard, there is no movement from the platform, which may indicate a broken or slipped belt.

The temperature functionality is in good working order (thermometer not included).

Specifications:

Platform Dimensions (W×D): 42×42 cm
Model: HT Ecotron
Serial No.: 109025

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carbolite CTF 12/100 Tube Furnace Lab Spares/Repairs

ITEM-36639

Carbolite CTF 12/100 Tube Furnace

This was removed from a university lab where it was surplus to requirements.

Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

General Laboratory

Filters