General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753684-D 9 Deck R2P Roller Incubator Spares/Repair Lab

ITEM-46315

Wheaton 753684-D 9 Deck R2P Roller Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers on; however, during testing it took approximately 5 hours to reach 37°C, with a maximum recorded temperature of 57°C despite being set to 60°C.

Internally, it houses a Wheaton Modular Cell Production Roller Apparatus Model 3. The roller mechanism powers on, but the rollers moved very slowly during testing. The speed control dial is missing, and manually adjusting the underlying nut did not improve the speed.

Due to the above issues, this item is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Floor Standing Autoclave Spares/Repair Lab

ITEM-42378

Rodwell Ensign 125 Floor Standing Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

Service and condition notes are as follows:

Unit powered on and lid opened without issue.
Evidence of the low water probe shorting onto the outside element, causing the machine to heat with low or no water.
All three heating elements were tested and found to be open circuit.
Three elements and the low water probe will need to be replaced.
It is advised that the unit be delivered to a specialist workshop if repair is to be undertaken.

Due to the faults identified, this item is listed as Spares/Repair.

Includes:

1 x USB memory stick
1 x inner basket

Specifications:

Model: Ensign 125
Serial No.: 2405
Year: 2015

Chamber dimensions: 46 cm diameter, 72 cm deep

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7883 Lab Glassware Washer Spares/Repairs

ITEM-35868

Miele Professional G 7883 Lab Glassware Washer

This item was removed from a university laboratory where it was surplus to requirements.

The unit did not power up during testing and has had the lock and door switch removed. It is sold for spares/repairs.

In good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Helmer iLF105-GX Freezer Spares/Repair Lab

ITEM-46454

Helmer iLF105-GX Freezer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it was set to its minimum temperature of -20ºc and it failed to cool, instead rising in temperature from ambient.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet - Damaged Base Lab

ITEM-39859

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, but is listed as Spares/Repair due to damage to the base of the cabinet.

Model: NordicSafe NC2 - 4L8

Serial: NC2-4L8-2013-80689

£ 500.00 (ex. VAT) 1 in stock

MAT BioMAT 2 Recirculating Class 2 Microbiological Safety Cabinet

ITEM-31182

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet

This was removed from a university lab where it was surplus to requirements.

The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb.

It is in good cosmetic condition with some marks from use.

Cabinet Dimensions - L120 W63 141cm

Frame Dimensions - L112 W60 H84cm

Internal workspace dimensions - D54 W106 H70cm

£ 500.00 (ex. VAT) 1 in stock

Hema-tek 2000 Slide Stainer Model - 4488A Lab

ITEM-30367

This Hema-tek 2000 Slide Stainer Model - 4488A was removed from a university lab where it was surplus to requirements.

The unit powers up and runs. The lab informed us that it had no known faults prior to removal.

It is in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs

ITEM-29745

Beckman Coulter Avanti J-E Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.

It is in good cosmeti condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Boxer Steam Sterilising Laboratory Autoclave 400/220L Lab Spares or Repairs

ITEM-18171

This Boxer Steam Sterilising Laboratory Autoclave 400/220L was removed from a university lab where it was surplus to requirements.

The unit has controller issue, the temperature display is faulty, the door mechanism is faulty and we were unable to reset it.

It is in reasonably good cosmetic condition but it has marks from previous use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Tuttnauer Vertical Laboratory Autoclave 5050ELV D Steriliser Lab 110L Faulty

ITEM-04932

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus to requirements.

The system has been stripped for parts and is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Incubator Lab Spares/Repairs

ITEM-40000

Sanyo MCO-20AIC CO2

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Packard 9200 Hydrogen Generator B920000 Lab Spares/Repairs

ITEM-28161

Packard 9200 Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen.

It is in reasonably good cosmetic condition, but has some marks from use.

it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer Spares/Repairs

ITEM-41126

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

£ 500.00 (ex. VAT) 1 in stock

Union Carbide Liquified Gas Container Liquid Nitrogen Dewar Lab

ITEM-46190

Union Carbide Liquified Gas Container Dewar

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Don Whitely MK3 Anaerobic Bench Top Work Station Spares/Repair

ITEM-42468

Don Whitely MK3 Anaerobic Bench Top Work Station

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but is not in working order, mainly due to a faulty gas inlet valve.

It powers on with functional temperature control and cooling fans. Key issues include non-working internal power sockets, flashing low CO2 and N2 warning lights, and a broken outer door lock seal knob, which compromises the chamber's sealing.

Due to the faults listed above, this system is listed as Spares/Repair.

Features:

Uses hydrogen, nitrogen, and carbon dioxide or a standard anaerobic gas mixture.
Digital temperature controller for constant temperature maintenance.
Humidistat-controlled condensing plate for excess moisture removal.
30-litre interchange lock capable of holding 108 plates with vacuum flushing.

Includes:

User Instruction Manual

Serial No.: 3170S

£ 500.00 (ex. VAT) 1 in stock

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

ITEM-42425

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

This item was removed from a university lab where it surplus to requirement.

It is good cosmetic condition and good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Spares/repairs

ITEM-42306

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing it failed to cool and remained at ambient temperature when set to -86ºc. Further inspection iden

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer Lab Faulty

ITEM-42305

Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on. During testing, it failed to reach the set temperature of -40˚C, only cooling down to 7˚C.

Therefore, it is listed as Spares/Repair.

Additionally, three inner door slide catches are missing.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System Lab Spares/Repair

ITEM-46288

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System

This system was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further at our site.

The previous client has notified us that it is not in working order and that Qiagen no longer supports this instrument.

The system is in good cosmetic condition.

Includes:

Cupboards/drawers integrated into the stand
All bottles and solvent traps
A pump
9 x 1100µl tip rack holders
Multiple miscellaneous plate holders
Tube holding racks
Handles for moving the unit
4 x 50µl tip rack holders
1 pack of Elution Microtubes
1 BGR Bottle
Lubricating oil
Various QIAsoft 5.0 disks including operating system, protocol packages, and maintenance disks
Data handbooks
Manuals

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Qiagen BioRobot 8000 Liquid Handling System

ITEM-45167

Qiagen Bio Robot 8000

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and powers on.

However, it displays errors during initialization (Z Motor 6: movement blocked, Code:8008 and Z Motor 8: movement blocked, Code:8008), preventing the robot from homing.

The lab reported that all components work except for one or more dilutor units in the syringe pump system, which Qiagen can no longer supply.

Therefore, this system is listed as Spares/Repair.

Included:

Qiagen Bio Robot 8000
Dell Control PC running Windows 7 with QIAsoft 4.1.4.5 software (discs included)
Keyboard, monitor, and mouse
Pump system
Box containing various spare parts and consumables

£ 500.00 (ex. VAT) 1 in stock

MVE XC 34/18 Nitrogen Dewar Aluminium 34 Litres Capacity

ITEM-42275

MVE XC 34/18 Nitrogen Dewar

This item was removed from a university where it was surplus to requirements.

The dewar is in good cosmetic condition, with signs of use.

Specifications:

Model: XC 34/18
Serial No.: ARB97K105
Capacity: 34 litres
Neck Opening: 9cm
Holds: 6 canisters

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MP Biomedical FastPrep - 24 Sample Preparation System Lab Spares/Repairs

ITEM-37750

This MP FastPrep - 24 Sample Preparation System was removed from a university lab where it was surplus to requirements.

The item powers on and is in a reasonably used cosmetic condition, unable to test further due to a 'Cancel Error'

"Improper closing of the dome will be indicated by display Cancel"

Due to this error, this item is sold as Spares or Repairs.

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model - MDF-U730M Biomedical Freezer Lab

ITEM-44676

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

12 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U730M Biomedical Freezer Lab

ITEM-44674

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Type MDF-U730M Biomedical Freezer Lab

ITEM-44675

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

ITEM-37273

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

This item was removed from a university laboratory where it was surplus to requirements.

The Savant SPD1010 SpeedVac powers on but encounters issues during operation. The lid fails to lock when a program is initiated, and although the rotor slightly moves, it does not fully run.

The AC-1 Phase motor operates correctly when tested independently but does not power on when connected to the SpeedVac.

Due to these issues, this unit is listed for spares or repair.

Model: SPD1010

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Spares/Repair

ITEM-37195

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, however, during testing, the unit powered on but emitted buzzing sounds followed by hissing and smoke.

Therefore, it is listed as Spares/Repair

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Revco 8930 EXF60086V -86 Freezer Lab Spares/Repairs

ITEM-44605

Thermo Scientific Revco ExF Freezer

This item was removed from a laboratory where it was surplus to requirements.

This item is in fair cosmetic condition.

The unit does not power on and no further tests have been conducted. It is being sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L8-80MW Ultracentrifuge Lab

ITEM-44394

Beckman L8-80 Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.

Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal.

Due to the above faults, this item is listed as Spares/Repair.

The 3-phase plug has been removed and there is no rotor included in the sale.

Also included:

1 x Operation Key

1 x Original User Manual

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

ITEM-37811

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

It was successfully temperature tested, however, during further testing it failed to retain humidity.

Therefore, it is listed as Spares/Repair.

It has been recently fitted with a new element.

Eurotherm 220 8E controllers for temperature and humidity

Two compartments of size 65cm x 49cm x 20cm (l x w x h)

£ 500.00 (ex. VAT) 1 in stock

Qiagen Rotor-Disc Heat Sealer Lab

ITEM-31394

This Qiagen Rotor-Disc Heat Sealer was removed from a university lab where it was surplus to requirements.

The item powers on and heats up. It is in reasonably good cosmetic condition with minor marks from use.

Holds 36 x 0.2ml and 9 x 2ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Scotsman Ice Machine Model AF20 Lab Spares/Repairs

ITEM-24772

This was removed from a university lab where it was surplus to requirements.

The unit powers up and holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell AMA240N Floorstanding Autoclave Lab Spares/Repairs

ITEM-39207

Astell ASA240 Floorstanding Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid.

This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair.

As displayed, it is in poor cosmetic condition internally.

Specifications;

Model- AMA240N
S/N- CLN51381

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Priorclave EV100 Top-Loader Autoclave Lab Spares/Repairs

ITEM-21246

This was removed from a university lab where it was surplus to requirements.

The system has a main board fault. It does not heat up as a result.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 Lab Spares/Repairs

ITEM-30166

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit.

It is sold for Spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Refrigerated Centrifuge Spares/Repairs Lab

ITEM-37628

Beckman L7-65 Refrigerated Centrifuge L7-65R

This was removed from a university lab where it was surplus to requirements.

The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds.

For this reason it is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan BR 3.11 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39146

Jouan BR 3.11 Refrigerated Centrifuge Lab

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers up.

Despite being in reasonably good cosmetic condition, this item is to be sold as Spares or Repairs due to its inability to maintain the set temperature and keep the lid open.

Included:

Jouan B 3.11 Centrifuge G=420 g, 4000 RPM Rotor & 11174179 Buckets

Beckman Coulter SW32Ti Swinging Bucket Rotor

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR Incu-Line Incubator Lab Spares/Repairs

ITEM-39196

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and works, but the door mechanism is broken, and the door will not remain closed.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-554 Incubator Lab Spares/Repairs

ITEM-36213

This was removed from a university lab where it was surplus to requirements.

The unit does not power up.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

LEEC Compact Incubator Model K2N Lab

ITEM-41676

LEEC Compact Incubator Model-K2N Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition internally and externally.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LMS 400NP Cooled Incubator Lab Spares/Repairs

ITEM-42191

LMS 400NP Cooled Incubator

This item was removed from a university where it was surplus to requirement.

The incubator is in excellent cosmetic condition and powers on.

However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.

Therefore, it is listed as Spares/Repair.

Specifications:

Serial No.: 12425/17PP
Capacity: 450 litres
Internal dimensions: 64 x 55 x 118 cm (l x w x h)
Temperature range: -10°C to 50°C
4 height adjustable shelves (56 x 60 cm)
Factory set auto defrost system

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753680-2 Reach In Incubator Lab Spares/Repairs

ITEM-39203

Wheaton 753680-2 Reach In Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

ITEM-39202

VWR 1927 Reach-In Dry C02 Incubator

This was removed from a university lab where it was surplus to requirement.

The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch.

The top panel is missing.

It is sold for spares/repairs

General Laboratory

Filters