General Laboratory
Items 701 to 750 of 928

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Lab Companion IS-971R Shaking Incubator Lab Cooling Fault
ITEM-39716
Lab Companion IS-971R Shaking Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.
It is in good cosmetic condition with minor marks
It is sold for spares/repairs.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs
ITEM-20411
This Medline Scientific Incubated Shaker Model - IS-971RF was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It was set to 37˚C but only reached 31˚C. The display would keep reverting to 22.2˚C as well. There was a note from the lab stating that it had some heating issues.
Inside dimensions - L89.5 x W63 x D48cm
Platform size - 46 x 76cm
The shaker speed ran up to 160rpm. We tried setting it to the max of 300 but it wouldn't run at that.
Cosmetically it is in a reasonable used condition but all the light tubes work bar one.
It is sold for spares/repairs due to the fault.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
SLS Lab Pro INC8017 Incubator Spares/Repair Lab
ITEM-46085
SLS Lab Pro INC8017 Incubator Lab
This item was removed from a university lab where it was surplus to requirement.
The incubator powers on but is in poor cosmetic condition, and emits loud noises at higher temperatures, leading to it being turned off for safety reasons.
There are structural issues as well. The wheels are broken, and the doors are misaligned, requiring them to be manually lifted to lock properly.
Due to the issues listed above, this incubator is listed as Spares/Repair.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs
ITEM-39052
This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Leica CM3050 S Cryostat Lab Spares/Repairs
ITEM-45369
Leica CM3050 S Cryostat
This item was removed from a university laboratory where it was surplus to requirements.
The cryostat powers on and is in good cosmetic condition. However, it has failed PAT testing due to a cable defect. Therefore, it is listed as Spares/Repair.
The system was also part of a product recall due to improper labelling so can only be used for parts.
It is equipped with multiple varied-sized cutting blades and a foot pedal.
Specifications:
- Settable Temperature: -10°C to -50°C (+/-3 K)
- Model: CM3050
- Serial No.: 3217/07.2002

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Gallenkamp Shaking Incubator Cat no. IOX400.XX2.C Lab
ITEM-39183
This Gallenkamp Shaking Incubator, Cat no. IOX400.XX2. Cr was removed from a university lab where it was surplus to requirements.
The device starts up with the shaking component functioning properly, however, the heating component is not operational. Therefore, it is listed as Spares or Repairs.
It is in reasonably good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock
Millipore Elix 5 Water Purification System Lab
ITEM-42932
Millipore Elix 5 Water Purification System
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good condition with minimal wear. The front disposable filter is missing, and no further testing has been performed.
Includes:
- Main unit only (front filter not present)
Model: Elix 5
Serial No.: F9HN95117C

£ 500.00 (ex. VAT) 1 in stock
Lab-Bubble Still Air PCR Enclosure - Blue
ITEM-39749
Lab-Bubble Still Air PCR Enclosure - Blue
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock
HasKris Recirculating Chiller S/n HA007835 Lab Spares/Repairs
ITEM-37147
This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surplus to requirements.
The unit powers up but was not tested further at our facility.
It is in good cosmetic condition, with some marks from use.
Some of the components have been removed, it is sold for spares/repairs

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab Spares/Repairs
ITEM-36845
This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus to requirements.
The unit powers up but shows the following error.
M26 - LAMP COOLING BLOWER FAILURE.
The manual states:
1. The blower is bad.
2. The blower relay is bad.
3. The airflow switch is bad.
We have been advised that the system is missing some essential parts. These parts are available from the manufacturer.
It is in otherwise good cosmetic condition with minor marks.
It is sold for spares/repairs due to the error.

£ 500.00 (ex. VAT) 1 in stock
Triple Red Duo Organic 60 Ultra Pure Water Purification System Lab
ITEM-45397
Triple Red Duo Organic 60 Ultra Pure Water Purification System
This item was removed from a university where it was surplus to requirements.
It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.
Included Components:
- Avidity Carbon Pre-Filter
- P/N: TR-2057
- Install Date: 26/7/23
- Avidity Cartridge Pack
- P/N: TR-2050
- Install Date: 26/7/23
- Avidity Cartridge Polisher
- P/N: TR-2051
- Install Date: 26/7/23
Specifications:
- Model: Organic 60 Ultra Pure Water Purification System
- Serial No.: 0916961-01

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Beckman Optima TL Ultracentrifuge w/ Beckman TLA 100.4 Rotor Spares/Repair
ITEM-42968
Beckman Optima TL Ultracentrifuge
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition with minimal wear. However, the unit is non-operational: it does not run programs or operate normally. The door does not open unless the unit is manually stripped down and the door lock pin is pressed.
Additionally, the vacuum chamber does not hold pressure. Error messages displayed include CPU, VAC, and SPD.
Therefore, it is listed as Spares/Repair.
Includes:
- Rotor: Beckman TLA 100.4
- Maximum Speed: 100,000 RPM
- Serial No.: 95U1272
Model: TL
Serial No.: CTL95E13

£ 500.00 (ex. VAT) 1 in stock
Statebourne Bio 36 Nitrogen Dewar
ITEM-45505
Statebourne Bio 36 Nitrogen Dewar
This item was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition. We are unable to test it at our facility.
Includes:
- 6 x Metal Cylinders
Double walled vacuum vessel.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Systec DB-45 Autoclave Spares/Repair Lab
ITEM-46571
Systec DB-45 Autoclave Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Helmer iLF105-GX Freezer Spares/Repair Lab
ITEM-46454
Helmer iLF105-GX Freezer Spares/Repair
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, however during testing it was set to its minimum temperature of -20ºc and it failed to cool, instead rising in temperature from ambient.
Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock
Sanyo Model MDF-U730M Biomedical Freezer Lab
ITEM-44674
Sanyo MDF-U730M Biomedical Freezer Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.
Includes:
6 x Shelves - 62 x 62cm
14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock
Sanyo Type MDF-U730M Biomedical Freezer Lab
ITEM-44675
Sanyo MDF-U730M Biomedical Freezer Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.
Includes:
6 x Shelves - 62 x 62cm
14 x Containers - 62 x 31 x 16cm

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System Lab Spares/Repair
ITEM-46288
Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System
This system was removed from a university laboratory where it was surplus to requirements.
It powers on but has not been tested further at our site.
The previous client has notified us that it is not in working order and that Qiagen no longer supports this instrument.
The system is in good cosmetic condition.
Includes:
- Cupboards/drawers integrated into the stand
- All bottles and solvent traps
- A pump
- 9 x 1100µl tip rack holders
- Multiple miscellaneous plate holders
- Tube holding racks
- Handles for moving the unit
- 4 x 50µl tip rack holders
- 1 pack of Elution Microtubes
- 1 BGR Bottle
- Lubricating oil
- Various QIAsoft 5.0 disks including operating system, protocol packages, and maintenance disks
- Data handbooks
- Manuals

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs
ITEM-45101
Thermo Scientific Heraeus CO2 Incubator
This item was removed from a university laboratory where it was surplus to requirements.
It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.
Therefore, it is listed as Spares/Repair.
The incubator is in excellent cosmetic condition.
Includes:
- 3 shelves (47 x 43 cm)
- Manuals
- Sample holders
Model: BB15
Serial No.: 40998054
Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab
ITEM-42723
Thermo Scientific Function Line BB15 CO₂ Incubator
This item was removed from a university laboratory where it was surplus to requirements.
The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.
No further temperature testing or CO₂ function testing was performed.
Due to the issues stated above, this item was listed as Spares/Repair.
Includes:
- Three internal shelves
The door seal and inner door catch are in good condition.
In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

£ 500.00 (ex. VAT) 1 in stock
Sanyo MDF-U730M Biomedical Freezer Lab
ITEM-44673
Sanyo MDF-U730M Biomedical Freezer Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.
Includes:
6 x Shelves - 62 x 62 cm
14 x Containers - 62 x 31 x 16 cm

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab
ITEM-46525
Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition but has not been tested on site due to the service report attached stating;
Rotor lock: Seized, cannot remove rotor
No reported problems Service and check as above Unit is old
Note 6: door seal has shrunk and will not go back into place
Note 9: chamber is corroded due to substance.
Note 10: gas struts have failed, lid is heavy and can fall.
Note 12: drive shaft housing corroded.
Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220 - Spares/Repair
ITEM-46647
Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, the previous owner has stated it is not in working order.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator - Spares/Repair Lab
ITEM-36470
Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator
This item was removed from a working laboratory where it was surplus to requirements.
The unit powers up but triggers an “Error 5 – safety thermostat setting”. The safety thermostat is factory set between -5°C and 130°C and cannot be adjusted without a chip card, which is not included. The cause may be a hardware fault, as noted in the manual.
Therefore, it is listed as Spares/Repair.
The unit is in good overall cosmetic condition, with a bent handle and a damaged corner.
Includes:
Power cable

£ 500.00 (ex. VAT) 1 in stock
Grant FH15 Flow Heater and FC20 Flow Cooler Lab
ITEM-42784
Grant FH15 Flow Heater and FC20 Flow Cooler
This system was removed from a university laboratory where it was surplus to requirements.
The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.
The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.
These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.
It is in good cosmetic condition.
Includes:
- Grant FH15 Flow Heater (Serial No. 72311)
- Grant FC20 Flow Cooler (Serial No. 72311)
- Model: FH15 / FC20
- Serial No.: 72311

£ 500.00 (ex. VAT) 1 in stock
Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E No Blade
ITEM-42796
Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, powers on and is in good mechanical order. We are unable to test it further at our facility.
Please note; There is no blade present on the cutting arm.

£ 500.00 (ex. VAT) 1 in stock
Windley Bros Heavy Duty Isolation Anti Vibration Table
ITEM-42830
Windley Bros Heavy Duty Isolation Anti Vibration Table
This item was removed from a university lab where it was surplus to requirements.
It is in reasonably poor cosmetic condition with surface rust present. We are unable to test it at our facility.
This anti-vibration table is constructed from cast iron and steel. The frame comprises angle iron legs with steel bar bracing, supporting a cast iron base.
Working height: 93cm.
Solid steel tabletop: 102 x 76 x 1.2cm

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Cytomat 24 C - Spares/Repair Lab
ITEM-40009
Thermo Scientific Cytomat 24 C Lab
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and powers on.
The unit connects via COM port when linked to a PC running Cytomat software. (not included)
However, it does not execute commands and displays errors within the software, indicating potential internal faults.
As such, this item is listed as spares or repair.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Cytomat 24 C-GR Spares/Repair Lab
ITEM-40010
Thermo Scientific Cytomat 24 C-GR Lab
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and powers on, however, the unit has a Com port error when connected to Cytomat software.
The internal screen within the door (used for the stacker system) does not power on, and there appear to be faults affecting the stacker system overall.
As such, this item is listed as spares or repair.
Please note: Software not included.

£ 495.00 (ex. VAT) 1 in stock
NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab
ITEM-35997
NesLab CryoBath CB-60 Refrigerated Water Bath Chiller
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock
Grant SBB Aqua 12 Plus Water Bath Lab
ITEM-42220
Grant SBB Aqua 12 Plus Boiling Water Bath
This item was removed from a university laboratory where it was surplus to requirements.
The water bath is in good cosmetic condition, with some light wear below the waterline.
It powers up and is in good working order (thermometer not included).
Specifications.
- Model: SBB Aqua 12 Plus
- Serial No.: MJ1028005
- Capacity: 12 litres
- Features: Clear polycarbonate lid

£ 480.00 (ex. VAT) 3 in stock
Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED
ITEM-39746
Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with minor marks.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 480.00 (ex. VAT) 1 in stock
Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK
ITEM-39744
Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 2 in stock
Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT
ITEM-39710
Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with minor marks

£ 475.00 (ex. VAT) 1 in stock
Elga Model: PURELAB FLEX Water Purification System Lab
ITEM-34576
This was removed from a university lab where it was surplus to requirements.
We were unable to test the unit as it was not supplied with the PSU
Max Pressure: 1.5/22 Inlet.
bar/psi: 1.5/22 Working.
Elga LC197 - Biofilter fitted - Expiry Date 2020-02.
Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 455.00 (ex. VAT) 1 in stock
Unbranded Laboratory Microscope Vibration Isolation Platform Lab
ITEM-19969
This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.
The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.
Size not taking into account the shape - L45 X W60 X H7.5cm

£ 450.00 (ex. VAT) 1 in stock
Liquid Nitrogen Tank Dewar Trolley
ITEM-46992
Dual Liquid Nitrogen Tank Trolley
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition.

£ 450.00 (ex. VAT) 1 in stock
Heraeus CO2 Incubator Type BB 6220 CUO2 Lab
ITEM-31143
Heraeus CO2 Incubator Type BB 6220 CUO2
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition externally and fairly poor cosmetic condition internally.
It has been recertified by en engineer with heating and CO2 functions tested,.
Specifications;
- Model: BB 6220 CUO2
- SN: 94109551
- Internal dimensions: D56 W65 H66cm
- 6 Doors with 6 Shelves: 50 x 26cm

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 450.00 (ex. VAT) 1 in stock
Heraeus BB 16 Function Line CO2 Incubator Lab
ITEM-39055
Heraeus BB 16 Function Line CO2 Incubator
This was removed from a university lab where it was surplus to requirements.
The system has been professionally serviced and is in full working order. A report is available on request.
It is in good cosmetic condition with minor marks.

£ 450.00 (ex. VAT) 1 in stock
Sicco Desiccator Cabinet Vacuum 260 x 260 x 260 mm (Internal W x D x H) Lab
ITEM-47232
Sicco Desiccator Cabinet Vacuum 260 x 260 x 260 mm (Internal W x D x H) Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it at our facility.

£ 445.00 (ex. VAT) 1 in stock
6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg
ITEM-36492
6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg
These were removed from a working lab where they were surplus to requirements.
All are in good cosmetic condition with minor marks.
Included are
Mettler Toledo F2 100g
Serial#: B128168752
Mettler Toledo F1 200g
Serial#: 132554
Troemner 200g
Serial#: 76359
Fisherbrand F1 1kg
Serial#: 06-J14833-12
Mettler Toledo F2 1kg
Serial#: B128168753
Mettler Toledo F1 1kg
Serial#: 158691

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 435.00 (ex. VAT) 1 in stock
RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab
ITEM-35168
This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.
The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.
It is in good cosmetic condition with minor marks from use.
3 Shelves - 52 x 42.5cm

£ 435.00 (ex. VAT) 1 in stock
Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab
ITEM-29721
This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed.
It is in reasonably good cosmetic condition with minor marks from use.

£ 425.00 (ex. VAT) 1 in stock
MVE XLC 230 Liquid Nitrogen Dewar Lab
ITEM-29731
MVE XLC 230 Liquid Nitrogen Dewar
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition with marks from use but has not been tested.
It comes with 6 storage racks each with 8 draws.
Internal Dimensions are: D70cm x W40cm.

£ 425.00 (ex. VAT) 1 in stock
Grant JBN 12 Water Bath 12 Litres Lab
ITEM-43037
Grant JBN 12 Water Bath 12 Litres Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
- Model - JBN12
- S/N - U41913001

£ 420.00 (ex. VAT) 1 in stock
Schutt Homgen Type 3.200 011 Homogeniser Lab
ITEM-34580
This Schutt Homgen Type 3.200 011 Homogeniser was removed from a university lab where it was surplus to requirements.
The unit powers up and the chuck turns but there is no tool attached. It is in good working order.
It is in reasonable cosmetic condition but has some marks and rust from age.

£ 420.00 (ex. VAT) 1 in stock
GeneChip Model 450/400 Fluidics Station Lab
ITEM-45032
GeneChip Fluidics Station 450/400
This item was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition with all dispensers powering on.
The previous client has stated it was in working order prior to removal.
Further testing could not be completed due to the absence of required software.

£ 415.00 (ex. VAT) 1 in stock
GeneChip Fluidics Station Model 450/400 Lab
ITEM-45031
GeneChip Fluidics Station 450/400
This item was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition with all dispensers powering on.
The previous client has stated it was in working order prior to removal.
Further testing could not be completed due to the absence of required software.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 415.00 (ex. VAT) 1 in stock
CIF Automatic Silent Air Compressor - S.A. 15EXPORT CA - SA 15
ITEM-20155
This CIF Automatic Silent Compressor SA 15 was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order. It cycles in and out correctly.
It is in reasonably good cosmetic condition but the pressure gauge is missing its plastic window.

£ 410.00 (ex. VAT) 1 in stock
Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1 x TC001 Lab
ITEM-47410
Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1 x TC001 Lab
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers on as it should and is in good used cosmetic condition. There are various marks from general use and some slight rusting at the rear, typical for water-based equipment.
The previous owner has stated it was in working order prior to removal.
Includes:
- 1 x PSU
- 2 x TC004 POU Endotoxin Filters (1 used, 1 sealed)
- 1 x TC001 Pre-Treatment Module (appears unused)
Run Hours:
- TC001 hours: 743h
- TC002 DI hours: 762h
- TC003 UV lamp hours: 38,680h
- TC009 UP (LH) hours: 2,270h
Items 701 to 750 of 928