Items 881 to 900 of 1062

Image of item

£ 120.00 (ex. VAT) 1 in stock

ALC International PK130 Centrifuge with T535 Rotor 4300RPM Lab

ITEM-35405

This ALC International PK130 Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order but the gas strut for the lid has failed.


It is in otherwise good cosmetic condition with minor marks.


Item supplied with:

ALC PK130 Centrifuge Operating Manual.

ALC T535 Rotor. Max RPM 4300. Max Load 3.70kg.

4 x ALC P510 Buckets.

4 x ALC-R2010 Bucket Inserts. Cat No. 11172461.

4 x ALC-R2018 Bucket Inserts. Cat No. 11172468.


Image of item

£ 115.00 (ex. VAT) 1 in stock

Zanussi Freezone Laboratory Refrigerator Fridge Model - ZFC 56 L Lab

ITEM-36984

Zanussi Freezone Laboratory Refrigerator Fridge Model - ZFC 56 L Lab


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order. (Thermometer not included).


It is in good cosmetic condition with minor marks.


3 Shelves - 47 x 34cm

Image of item

£ 115.00 (ex. VAT) 1 in stock

Bibby Sterilin RE200B Water Bath for Rotary Evaporator Lab

ITEM-24016

This Bibby Sterilin RE200B Water Bath was removed from a university lab where it was surplus to requirements.


It is in reasonably good cosmetic condition but has some rust at the rear.


It powers up and has been tested with a digital thermometer (not included).


It was tested to 50˚C and reached 54.5 It was then set to max and reached 98.6˚C



Image of item

£ 115.00 (ex. VAT) 1 in stock

Sorvall HB-6 Swinging-Bucket Centrifuge Rotor 6 x 50ml P/N 11850 Lab

ITEM-13889

This Sorvall HB-6 Swinging Bucket Centrifuge was removed from a university where it was surplus to requirements.


It comes with 6 x 50ml Titanium Swinging Buckets

It is rated to up to 13000rpm


It is in very good condition but has previously been used. Please note, that this unit has not been tested and will need to be inspected for safety before use.



Image of item

£ 110.00 (ex. VAT) 1 in stock

New Brunswick Water Bath Shaker Model - Classic C76 Lab

ITEM-19905

New Brunswick Water Bath Shaker Model - Classic C76


This was removed from a university lab where it was surplus to requirements.


The unit powers up and the shaker has been tested to the max speed of 300rpm. The water bath has been tested with a digital thermometer (not included).


It was set to 37˚C which it reached after about half an hour. It was then set to the max of 80˚C. It reached 75˚C before it stopped getting any hotter.


It is in good cosmetic condition but has some marks from use.


Unit appears to be in good working order.

Image of item

£ 110.00 (ex. VAT) 3 in stock

CAS Contained Air Solutions ForMAT Safety Cabinet Sterilisation Unit

ITEM-28144

This CAS Contained Air Solutions ForMAT Safety Cabinet Sterilisation Unit was removed from a university lab where it was surplus to requirements.


The item powers on and is in a reasonable, used cosmetic condition.


We were unable to test it further. There appear to be some parts missing.


Image of item

£ 105.00 (ex. VAT) 1 in stock

15 x EcoTestr pH2 PH Meters Lab

ITEM-25082

15 x EcoTestr pH2 PH Meters


These were removed from a university lab where it was surplus to requirements.


The units are battery-powered but we did not have the correct batteries to test them. The units are in good cosmetic condition.


Batteries required:

4x LR44


Image of item

£ 105.00 (ex. VAT) 1 in stock

Elga Option 30 Plus Water Purification System & 40L Reservoir Lab

ITEM-34575

Elga Option 30 Plus Water Purification System & 40L Reservoir


This was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further.


It is in good cosmetic condition with minor marks from use.

Image of item

£ 105.00 (ex. VAT) 1 in stock

Elga Purelab Option R7\15 Water Purification System with Reservior Lab

ITEM-17352

This Elga Purelab Option R7\15 Water Purification System was removed from a university lab where it was surplus to requirements.


This item was removed from a hospital laboratory where it was surplus to requirements. We were informed by the client that the unit was in good working order prior to decommissioning. However the unit has not been used in a while so may require some cleaning and refurbishment.


Included are;


1 x Filtration/Pump Unit

We powered on the unit with no issues. The pump was heard running and operated as should.

The dispenser tap works with no problems.


1 x Reservoir Unit

This unit is a 75L unit and is fed from the main unit. There is a float sensor wire that connects to allow monitoring.

The top cap of the tank has a crack so will need replacing.


1 x Set of Filter Units

These units are wall mountable. There are to gauges with regulators mounted on each unit, The gauges have a range of 0-6.8 Bar.


The system is in good condition with minor age and usage marks. There is an operator's manual with the unit.


Image of item

£ 105.00 (ex. VAT) 1 in stock

Heraeus #3048 2 x 25g 3000rpm Swinging Bucket Centrifuge Rotor Lab

ITEM-21154

This Heraeus No. 3048. 2 x 25g 3000rpm Swinging Bucket Centrifuge Rotor was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used again.


Bucket Dimensions: 13cm x 9cm.

Image of item

£ 100.00 (ex. VAT) 1 in stock

Freeze Drying Chamber with Valves for Vacuum Freeze Dryer Lab

ITEM-36071

Freeze Drying Chamber with Valves for Vacuum Freeze Dryer


This was removed from a university lab where it was surplus to requirements.


The unit has not been tested but it is in good cosmetic condition with marks from use.


Item includes 3 shelves and 8 valves.


Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 100.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S+ 170-200 Plus CO2 Laboratory Incubator Lab

ITEM-35093

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.


The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.


It is in good cosmetic condition with minor marks from use.


3 Shelves - 52 x 42.5cm

Image of item

£ 100.00 (ex. VAT) 1 in stock

Taylor-Wharton 10LD Liquid Nitrogen Dewar Lab

ITEM-29961

This Taylor-Wharton 10LD Liquid Nitrogen Dewar was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition with marks and scratches. It has not been tested.

Image of item

£ 95.00 (ex. VAT) 1 in stock

LH Fermentation Mk V Orbital Platform Shaker Lab

ITEM-24404

This LH Fermentation Mk V Orbital Platform Shaker was removed from a university lab where it was surplus to requirements.


The item powers on and works with the shaker speed running up to 400rpm.


The item is in a reasonable, used cosmetic condition with marks and stains.


Shaker platform size - 61 x 61cm


Image of item

£ 95.00 (ex. VAT) 1 in stock

Beko Laboratory Freezer Lab

ITEM-31046

This was removed from a university lab where it was surplus to requirements.


It is in full working order and has been tested with a digital thermometer down to -20˚C


It is in good cosmetic condition with minor marks from use.


Internal Dimensions - D40 W43 H66cm

2 x Shelves 38 x 42cm

Bottom Drawer - 41 x 23 x 16cm

Top 'Fast Freeze' section - 37 x 42 x 14.5cm

Ice Bank Tray - 40.5 x 25cm

1 x Ice Cube tray holds 12 cubes 19.5 x 7.5cm


Image of item

£ 90.00 (ex. VAT) 1 in stock

LEEC Compact Laboratory Incubator Model - K2N Lab

ITEM-25618

This LEEC Compact Laboratory Incubator Model - K2N was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer. When the dial was set to just under 40˚C it reached 32. When turned to max it reached 48˚C. It is missing the glass door which might be why it is not reaching the temperature.


We recommend replacing the glass-door.


Inside dimensions - D41 W55 H84cm

4 Shelves - 42 x 53cm


Image of item

£ 90.00 (ex. VAT) 1 in stock

Anthos Twin Laboratory Fluid Dispenser Type: 16 200 Lab

ITEM-24672

This Anthos Twin Laboratory Fluid  Dispenser Type: 16 200 was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has not been tested.

Image of item

£ 90.00 (ex. VAT) 1 in stock

Protex Ventilated Workstation Model/Type - VB FH Lab

ITEM-31712

Protex Ventilated Workstation Model/Type - VB FH


This was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition with minor marks from use.


It has not been tested as it needs a power cable wired up.


Workstation surface - 140 x 70cm

Image of item

£ 90.00 (ex. VAT) 1 in stock

Purite Select HP40/BP/IT Water Purification System Lab

ITEM-20126

This Purite Select HP40/BP/IT Water Purification System was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition but has some marks from use.


It powers up and the system info shows DI pack replacement (right) was due 09/03/21. It has not been tested further.



Image of item

£ 85.00 (ex. VAT) 1 in stock

Standa Opto-Mechanics Anti-Vibration Isolation Table (Frame Only)

ITEM-34936

This Standa Opto-Mechanics Anti-Vibration Isolation Table Frame was removed from a university lab where it was surplus to requirements.



Dimensions - L150 x W90 x H56 (Adjustable by winding feet))


It is in good cosmetic condition.

Items 881 to 900 of 1062

Filters

Price (£)

to

Condition