General Laboratory

£ 560.00 (ex. VAT) 1 in stock

Bilz BiAir Laboratory Vibration Isolation Optical Table Lab

ITEM-30340

This Bilz BiAir Laboratory Vibration Isolation Optical Table was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition. There are some scuffs and scratches on top of the table from general use. There is surface rust on the tabletop from general use. We were unable to test the unit at our facility.

Included are;

4x (BiAir) Air Springs:

The units are in good cosmetic condition.

3x Bilz Mechanical Pneumatic Level Controllers:

The units are in good cosmetic condition.

1x Festo Pneumatic Regulator:

Model. LFR-D-5M-MINI A543

•p1 Max 16bar

240psi /1,6MPa

•p2 Max 12bar

180 psi /1,2MPa

£ 560.00 (ex. VAT) 1 in stock

KODIAK Lytron Recirculating Chiller Model RC022H03FB2M066 w/ Turbine Pump Lab

ITEM-20061

This KODIAK Lytron Recirculating Chiller Model RC022H03FB2M066 was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and it ran at;

5ºC, 15ºC and 35ºC

The unit runs great. The filter does leak around the rim and we suspect the main seal needs replacing.

From the spec sheet:

Reservoir Capacity: 7.6L.

Temperature Range: 5ºC - 35ºC.

Compressor Size: 3/4 HP.

It is in good cosmetic condition but is missing the front grill.

RECERTIFIED ITEM

£ 555.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Jouan c4i Benchtop Centrifuge w/ 4750rpm Rotor Lab

ITEM-31858

This Thermo Electron Corporation Jouan c4i Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. The rotor is created for 4750rpm, but the unit's max speed with M4 buckets is 4000rpm.

It is in good cosmetic condition with minor marks from use.

£ 555.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Laboratory Incubator Lab

ITEM-38914

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

4 Shelves - 60 x 60cm

£ 555.00 (ex. VAT) 1 in stock

MAT BioMAT 2 Class 2 Recirculator Microbiological Safety Cabinet Lab

ITEM-31177

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet

This was removed from a university lab where it was surplus to requirements.

The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb.

It is in good cosmetic condition with some marks from use.

Cabinet Dimensions - L120 W63 141cm

Frame Dimensions - L112 W60 H84cm

Internal workspace dimensions - D54 W106 H70cm

£ 550.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Lab Incubator

ITEM-38913

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

3 Shelves - 60 x 60cm

£ 550.00 (ex. VAT) 1 in stock

Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge with 4500rpm Rotor Lab

ITEM-30547

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm.

It was tested with a digital thermometer (not included).

When the temperature was set to 4˚c, the thermometer read 5˚c

When the temperature was set to -4˚c (minimum) the thermometer read -5˚c

There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors.

It is in reasonably good cosmetic condition but has some minor marks from use.

£ 550.00 (ex. VAT) 1 in stock

CAS Controlled Air Solutions SmartFAST Laminar Flow Cabinet Lab

ITEM-23283

This FASTER SmartFAST Laminar Flow Cabinet was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

There is no UV bulb fitted and there is no display. The display would have been an optional extra not selected when the original customer ordered the unit.

It is in excellent cosmetic condition with only minor marks from use.

Unit dimensions - L88 W70 H93cm

Inside dimensions - D37.5 W72 H63cm

SPARES/REPAIR ITEM

£ 545.00 (ex. VAT) 1 in stock

Thermo Scientific Centrifuge Casing & Buckets H-6000/HBB-6/HLR-6 Lab

ITEM-23422

Thermo Scientific Centrifuge Shell & Buckets H-6000/HBB-6/HLR-6

This was removed from a university lab where it was surplus to requirements. There is no rotor included. this is just for the shell and the buckets.

The item is in reasonable cosmetic condition but has marks from use.

It comes with 6x Thermo Scientific Buckets - PN 44040

max. Mass: 2575g

Diameter: 95.79mm

Depth: 127.07mm

SPARES/REPAIR ITEM

£ 545.00 (ex. VAT) 1 in stock

LMS Model 600NP Free-Standing Cooled Incubator Lab

ITEM-19912

This LMS Free-Standing Cooled Incubator Model - 600NP was removed from a university lab where it was surplus to requirements.

The unit powers up but the control panel is faulty and requires replacement.

It is in good cosmetic condition with some minor marks from use.

It is sold for spares/repairs.

Internal dimensions - D65 W60 H149cm

2 Shelves - 55 x 51cm

RECERTIFIED ITEM

£ 540.00 (ex. VAT) 1 in stock

Jun Air Compressor Model No. OF302-25MD2 Lab

ITEM-24677

This Jun Air Oilless Air Compressor Model No. OF302-25MD2 was removed from a university lab where it was surplus to requirements.

We had the compressor professionally serviced and certified. The engineer fitted a new pneumatic pipe and it now is in full working order. It cycles at 120psi.

It is in good cosmetic condition with only minor marks from use.

£ 540.00 (ex. VAT) 1 in stock

Genlab LCI/12V/PDIG Lab Incubator

ITEM-38916

Genlab LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. (Digital thermometer not included).

5 Shelves - 61 x 61cm

£ 540.00 (ex. VAT) 1 in stock

Genlab Model LCI/12V/PDIG Lab Incubator

ITEM-38912

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

7 Shelves - 61 x 61cm

£ 540.00 (ex. VAT) 1 in stock

Statebourne Biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar Lab

ITEM-29955

Statebourne Biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use.

6 holder inserts. Triangular with one curved side. Sides are 20cm.

46cm diameter. 78cm height w/o wheels. 88cm height w/ wheels.

£ 540.00 (ex. VAT) 1 in stock

DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox

ITEM-24289

This DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox was removed from a university lab where it was surplus to requirements.

The unit has not been used in some years and will need a full service before it is used again. The gloves will also all need replacing.

All the parts of the unit are in very good condition. and they all powered on with no issues. It's in good working order. The door lock system on the glove ports all works correctly.

The heating function works and was tested with a digital thermometer

It was set to 37˚C, our thermometer measured 36.7˚C ad the display was showing 36.9˚C. The temperature did fluctuate slightly but was never above the set value.

The gas system was not tested.

The glove box's internal dimensions are 185cm(L) x 69cm (W) x 79cm (H).

The airlock unit's internal dimensions are 30cm (L) x 35cm (W) x 30cm (H).

The system is mounted on a substantial metal frame with wheels that stands at 94cm to platform height.

£ 540.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head Lab

ITEM-31624

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head

This was removed from a laboratory where it was surplus to requirements.

The unit powers up but is missing its control interface, but it is operable.

Included are;

KrosFlo Research II Pump:

Model No. 900-1612

MasterFlex Pump Head:

Model No 900-1613

Tubing Sizes:

L/S 13, 14, 16, 25, 17, 18

Accessories:

1x RS232 to Male DIN Cable:

2x Pairs of Grips

Material: Plastic

2x Arms

Material: Metal

The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary.

1x Misc Grip

Material: Aluminium

The unit is in good cosmetic condition.

2x Arm Grips:

Material Plastic

The units are in good cosmetic condition. They hold position well against the metal upright arms.

£ 535.00 (ex. VAT) 1 in stock

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G Lab

ITEM-32032

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G

This was removed from a lab where it was surplus to requirements. We are told it was barely used by the client.

The unit powers up and has been tested with a digital thermometer (not included) to -41˚C.

It is in excellent cosmetic condition.

Internal dimensions - L50 W66 H87cm

2 Shelves 63 x 47cm

2 Drawers 59 x 46 x 6cm

£ 535.00 (ex. VAT) 1 in stock

LMS Counter-Top Laboratory Cooled Incubator Lab

ITEM-24792

This LMS Counter-Top Laboratory Cooled Incubator was removed from a university lab where it was surplus to requirements.

The unit powers on and has been tested with a digital thermometer (not included).

Set at 4ºC our thermometer read 4ºC

Set at -10ºC our thermometer read -4.8ºC

The unit had been running for a number of hours and settled at -4.8ºC

Set at 22ºC our thermometer read 22.9ºC

Set at 30ºC our thermometer read 30.9ºC

The unit is lockable however there is no key supplied with this unit. I recommend a replacement barrel and key.

Interior dimensions:

W45cm x H43cm x D28cm

£ 535.00 (ex. VAT) 1 in stock

MSE Sanyo HAWK 15/05 Refrigerated Benchtop Centrifuge MSB005.CR1.K Lab

ITEM-30375

This MSE Sanyo HAWK 15/05 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order up to 15000rpm. The refrigeration works well.

It is in good cosmetic condition with minor marks from use.

The rotor has 25x2ml Buckets

£ 535.00 (ex. VAT) 1 in stock

Thermo Electron Holten LaminAir Class II Safety Cabinet Lab

ITEM-31038

This Thermo Electron Holten LaminAir Flow Safety Cabinet was removed from a university lab where it was surplus to requirements.

The item powers on with air flowing but the screen was flashing red with an alarm when powered on, this stopped when the door was opened. The door & white light works although the door is a bit stiff. It comes with one key.

It is in good cosmetic condition but has some marks from use.

Internal Dimensions - D64 L150 H60cm

Hours? 5542

General Laboratory

Filters