General Laboratory
Items 841 to 860 of 1062
£ 150.00 (ex. VAT) 1 in stock
Heraeus Benchtop Laboratory Incubator Type - B 5060 EK-CO2 Lab
ITEM-28140
This Heraeus Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit has been tested with a digital thermometer (not included) at 5% CO2.
The temperature was first set to 37°c, it took around two hours to reach.
The temperature was then set to its max of 50°c but it only reached as high as 43.7˚c on the thermometer after running for nearly 6 hours.
Our external CO2 Gauge only registered 3.8% CO2 while it was running.
Internal dimensions - D57 W60 H60.5cm
6 x Shelves - 51 x 27cm
£ 150.00 (ex. VAT) 1 in stock
Millipore Synergy UV Water Purification System SYNSV0000 Lab
ITEM-35568
Millipore Synergy UV Water Purification System SYNSV0000
This was removed from a university lab where it was surplus to requirements.
The unit powers up and pumps water.
It is in reasonable cosmetic condition but has a lot of marks from use, and splash marks inside.
£ 150.00 (ex. VAT) 1 in stock
Labnet Prism Microcentrifuge Air-Cooled Model C2500 Lab
ITEM-23466
This Labnet Prism Microcentrifuge Model C2500 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. The lid engages and disengages automatically when stopping and starting the unit.
We ran it at 3000rpm for 5 minutes, 6000 rpm for 3 minutes and the max of 15000 rpm but it wouldn't go higher than 10100rpm. However we did not run it with a rotor as we do not have a rotor for this unit.
There is no rotor supplied with the unit.
£ 150.00 (ex. VAT) 1 in stock
Sorvall SLA-1500 Super-Lite GSA Fixed Angle Centrifuge Rotor 6 x 250ml Lab
ITEM-23992
This Sorvall SLA-1500 Super-Lite GSA Centrifuge Rotor was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety before it is used again.
6 x 250ml Tube Holders
£ 150.00 (ex. VAT) 1 in stock
B&T Unitemp Benchtop Laboratory Incubator Lab
ITEM-24675
The unit powers on and is in good cosmetic condition. The unit does have tape marks and surface stains around it from general use. The rubber seal on the door is quite dirty and stained from general use.
The unit was tested with a digital thermometer (not included).
When set to 37ºC our thermometer read 29.8ºC
When set to 65ºC our thermometer read 46.6ºC
When set to 100ºC our thermometer read 79.3ºC
The unit was powered on for most of a morning to reach these temperatures.
Interior dimensions:
H36cm x W38cm x D32cm
£ 150.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator Model - MCO-17AI Lab
ITEM-27470
This Sanyo CO2 Laboratory Incubator Model - MCO-17AI was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with 5% CO2 and measured with a digital thermometer (not included).
It was set to 37˚C which it reached in 2 hours. It was then set to 50˚C which took a further hour to reach.
The digital thermometer was consistent with the readings on the display.
The plastic door handle has snapped but that doesn't seem to affect the operation of the unit at all.
Internal dims - D49.5 W49 H65cm
2 Shelves - 45 x 45cm
£ 145.00 (ex. VAT) 1 in stock
Union Carbide Liquid Nitrogen Refrigerator Tank/Dewar & Trolley Lab
ITEM-18512
This Union Carbide Liquid Nitrogen Refrigerator Tank/Dewar & Trolley was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition but is covered in peeling stickers. It has not been tested.
£ 145.00 (ex. VAT) 1 in stock
Labcold Model RLDF0505 Pharmacy Refrigerator Laboratory Fridge Lab
ITEM-36689
Labcold Model RLDF0505 Pharmacy Refrigerator Laboratory Fridge Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.
It is in good cosmetic condition with minor marks.
3 Shelves - 50 x 39cm
Bottom Shelf - 50 x 24cm
£ 145.00 (ex. VAT) 1 in stock
Thomas Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump
ITEM-19016
This Thomas Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump was removed from a university lab where it was surplus to requirements.
The unit sounds like it powers up but has no power indicator on it. The fan blades however do now spin. It has not been tested.
It is in good cosmetic condition with very limited marks from use.
£ 145.00 (ex. VAT) 2 in stock
THOMAS Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump Lab
ITEM-18929
This THOMAS Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump was removed from a university lab where it was surplus to requirements.
It is in reasonable cosmetic condition but has some stains and marks from use.
It has not been tested as it has an unusual power connector which we do not have an adapter for.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.
£ 145.00 (ex. VAT) 1 in stock
4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets Lab
ITEM-23407
4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets
These were removed from a university lab where they were surplus to requirements.
They are in good cosmetic condition but have some marks from use.
£ 145.00 (ex. VAT) 1 in stock
Jouan A14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor Lab
ITEM-20120
This Jouan A14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but it has some light stains on the lid and side panels. The Interior and rotor are clean.
The rotor has 20 sample spaces, it accepts 2ml vials. It is rated at 14000rpm.
It powers up fine and has been tested at a few different speeds. The numbers don't necessarily match up with the RPM of the unit.
Set at 3, the centrifuge hit 5800 RPM.
Set to 9, the centrifuge hit 11500 RPM.
Set to max of 14000, the centrifuge hit 14200 RPM.
£ 145.00 (ex. VAT) 1 in stock
Heraeus Biofuge Pico Centrifuge with 3324 Rotor Lab
ITEM-25991
This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly.
The unit was tested at the max speed of 13000rpm and ran smoothly.
The unit has the following rotor fitted;
Heraeus Rotor #3324
•PP1/96
•Max Speed 13000rpm
• Max load 24x4g
•24x 2.0 flat cap tube holders.
No further testing done.
£ 145.00 (ex. VAT) 1 in stock
Labcold Pharmacy Refrigerator Model RLDF0505 Lab
ITEM-36691
This Labcold Pharmacy Refrigerator Model RLDF0505 was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.
It is in good cosmetic condition with minor marks from use.
Top shelf - 50 x 39cm
Bottom Shelf - 50 x 24cm
£ 145.00 (ex. VAT) 1 in stock
Labcold RLDF0505 Lab Fridge Pharmacy Refrigerator RLDF0505 Laboratory
ITEM-36687
Labcold RLDF0505 Lab Fridge Pharmacy Refrigerator RLDF0505 Laboratory
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.
It is in good cosmetic condition with minor marks.
Top shelves - 50 x 39cm
Bottom Shelf - 50 x 24cm
£ 140.00 (ex. VAT) 1 in stock
Fisherbrand Heating Water Bath Model FB60305 with Lid Lab
ITEM-25153
This Fisherbrand Heating Water Bath Model FB60305 was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition. There are some surface stains in the bath from general use. All buttons are responsive. It is in full working order.
Interior dimensions:
L50cm x W29cm x D15cm
The unit was tested with a digital thermometer (not included)
At 37ºC our thermometer read 37.4ºC
At 65ºC our thermometer read 65.8ºC
At 99ºC our thermometer read 100.4ºC
£ 140.00 (ex. VAT) 1 in stock
Lec Technical Lab Freezer ISU55 Laboratory
ITEM-35142
Lec Technical Lab Freezer ISU55 Laboratory
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included) to -25˚C. It is in good working order and good cosmetic condition with minor marks from use.
2 Shelves - 42 x 37cm
£ 140.00 (ex. VAT) 1 in stock
Millipore Milli-Q Synthesis Water Purification System Cat no. ZMQS5VF01 Lab
ITEM-24444
Millipore Milli-Q Synthesis Water Purification System Cat no. ZMQS5VF01
This was removed from a university lab where it was surplus to requirements.
The item powers on but displays system errors 4 & 7 with service and alarm lights flashing. We were unable to test it any further.
The item is in a reasonable, used cosmetic condition.
£ 140.00 (ex. VAT) 1 in stock
Thermo Scientific Fiberlite F14-6X250y Centrifuge Rotor 14,000rpm 30,100 x g Lab
ITEM-19991
This Thermo Scientific Fiberlite F14-6X250y Centrifuge Rotor 14,000rpm 30,100 x g was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again.
Specs;
14,000rpm
30,100 x g
PN - 096-062034-03
6 X 250ml tube slots
NEW ITEM
NEW ITEM
£ 140.00 (ex. VAT) 5 in stock
Teknomek Stainless Steel Lectern with Double Undershelf
ITEM-36693
Teknomek Stainless Steel Lectern with Double Undershelf
This was removed from a university lab where it was surplus to requirements.
It is brand new and unused.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.
- Width: 600mm
- Depth: 400mm
- Height: 1000mm
- Floor clearance: 175mm
Items 841 to 860 of 1062