General Laboratory

£ 285.00 (ex. VAT) 1 in stock

Job Lot of Lancer Dishwasher/Drier Parts - Racks, Spraying Heads, Rails Lab

ITEM-25975

Job Lot of Lancer Dishwasher/Drier Parts

This was removed from a university lab where it was surplus to requirements.

Included are;

1 x 64cm L x 64cm W x 19cm H rack.

3 x 64cm L x 64cm W x 13cm H racks.

3 x Braided hoses.

4 x Rack rails.

4 x 14.5cm Spraying heads.

1 x 49cm Spraying head.

1 x 63cm Spraying head.

3 x Metal baskets/filters.

£ 280.00 (ex. VAT) 1 in stock

Captair Ductless Filtration System Type 5000 C Lab

ITEM-27501

This Captair Ductless Filtration System Type 5000 C was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It is in reasonable cosmetic condition with marks form use.

Carbon Filter inside - Type C-100

Size - 755 x 405 x 100mm

Unit size - L81 W45 H33cm

£ 280.00 (ex. VAT) 1 in stock

Beckman Coulter S2415 181/01 14000rpm Centrifuge Rotor S/N10D Lab

ITEM-17364

This Beckman Coulter 14000rpm Centrifuge Rotor S/N10D was removed from a university lab where it was surplus to requirements.

It is rated to 14000 r.p.m and is 18cm in diameter and 7cm high. It has six buckets that hold four small micro sample tubes 10.8mm dia x 40.6mm.

It is in good condition but does have signs of age and use.

£ 280.00 (ex. VAT) 1 in stock

Fisher Scientific accuSpin Micro with 13000rpm Rotor Cat No. 75003245 Lab

ITEM-25990

This Fisher Scientific accuSpin Micro with 13000rpm Rotor was removed from a university lab where it was surplus to requirements.

The unit is in good used cosmetic condition but it does have various signs of general use.

The lid opens, the brake is working and all buttons appear to be responsive. The LCD screen is working and displays clearly.

The unit has been tested up to the max speed of 13,000rpm. It runs smoothly and as it should.

The rotor included is a;

Heraeus Rotor Model #3325B

•F 178953 PP 3/00

• Max Speed 13000 rpm

• Max load 24x4g

24x 2.0 tube flat cap holders

£ 280.00 (ex. VAT) 1 in stock

Envair Pharmassist Positive Pressure Isolator Glovebox Workstation Lab

ITEM-31387

This Envair Pharmassist Positive Pressure Isolator Glovebox Workstation was removed from a university lab where it was surplus to requirements.

It powers on with air-flow and light working. it had been partially disassembled by the time it got to our site, but the lab confirmed that it was in full working order prior to removal.

The item is in a reasonable, used cosmetic condition with some marks from use.

Dimensions:-

Cabinet without Transfer Hatches - L180 W76 H140cm

Cabinet with Transfer Hatches - L300 W76 H180cm

Frame - L175 W70 H78.5cm

Internal Workspace - L179 W70 H92cm

Transfer Hatches removed/disconnected for transport/storage.

Internal dimensions - L60 W35 H29cm

2 x Hepa V Panels removed from the rear of the unit for transport/storage

£ 275.00 (ex. VAT) 1 in stock

Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface - 7544-06 Lab

ITEM-27760

Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface. These were removed from a university lab where they were surplus to requirements.

Included are;

1 x Pump Drive: Model No. 7544-06 Speed 6rpm

The unit powers on and is in good cosmetic condition. The motor moves smoothly.

We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.

1 x Pump Drive: Model No. 7544-20 Speed 20rpm

The unit powers on and is in good cosmetic condition. The motor moves smoothly. We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.

1 x Liquid Level Interface Model LI-08/B01 The unit is in good cosmetic condition.

2x Pump Heads:

Model No. 7014-20

Part No. 3.358.609

2x Masterflex Norprene tubing

Model No. 6404-14

£ 275.00 (ex. VAT) 1 in stock

Baker ReCO2ver Plus Rapid Recovery Incubator Lab Spares/Repairs

ITEM-31379

Baker ReCO2ver Plus Rapid Recovery Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a heating issue.

It is sold for spares/repairs.

RECERTIFIED ITEM

£ 270.00 (ex. VAT) 1 in stock

Jun-Air MINOR Air Compressor with Accessories (1994) Lab

ITEM-20226

This Jun-Air MINOR Air Compressor was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and powers on. It has a silent pump which functions well.

This compressor was serviced in December 2022. It has been tested and performs to 115psi.

The pump automatically switches off when the desired pressure is reached and the tank is full. The Pressure relief valve was also tested and works correctly.

£ 270.00 (ex. VAT) 1 in stock

Corning LSE Orbital Shaker Lab

ITEM-37025

Corning LSE Orbital Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

It runs up to 60rpm.

Ref - S2030-LS-COR-UK

£ 270.00 (ex. VAT) 1 in stock

Eppendorf 5810 Benchtop Laboratory Centrifuge Lab

ITEM-30216

This Eppendorf 5810 Benchtop Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order and in great cosmetic condition with minor marks from use.

There is no rotor fitted. It was tested with one from another unit.

£ 270.00 (ex. VAT) 1 in stock

J. Bibby Water Still Model W14S Lab

ITEM-38416

J. Bibby Water Still Model W14S

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Serial No. W14S 85/1168

£ 270.00 (ex. VAT) 1 in stock

Eppendorf 5417C Benchtop Centrifuge with Aerosoltight GE 035 11/01 Rotor Lab

ITEM-30269

This Eppendorf 5417C Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs up to 20,800rpm but is a little loud at max speed.

It is in reasonably good cosmetic condition but has a small crack on the bottom left of the unit.

It is fitted with an Eppendorf Aerosoltight GE 035 11/01 Rotor which holds 30 x 2ml tubes

NEW ITEM

£ 270.00 (ex. VAT) 1 in stock

4 x Thermo Scientific 75003639-02 Rund Adapters 14x15ml Centrifuge Rotor

ITEM-38714

4 x Thermo Scientific 75003639-02 Rund Adapters 14x15ml

These were removed from a university lab where they were surplus to requirements.

They are brand new and unused.

£ 270.00 (ex. VAT) 1 in stock

Stuart SSM5 Microtitre Plate Shaker Lab

ITEM-35482

This Stuart SSM5 Microtitre Plate Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested at multiple speeds with the timer active. It is in good working order.

It is in excellent cosmetic condition with minor marks.

NEW ITEM

£ 265.00 (ex. VAT) 1 in stock

Thermo Scientific Cimarec 7x7" Hotplate Model HP88857105 Lab

ITEM-31926

This Thermo Scientific Cimarec 7x7" Hotplate Model 88857105 was removed from a university lab where it was surplus to requirements.

The unit is brand new and has only been used for our testing. It is in full working order.

The item comes in original packaging box with operating manual and IEC Lead.

£ 265.00 (ex. VAT) 1 in stock

Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI Lab

ITEM-24501

Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI

These were removed from a university lab where they were surplus to requirements.

The units power up and are in good working order. They were tested with a digital thermometer (not included).

They are in good cosmetic condition with minor marks from use.

1x Sanyo CO2 Incubator:

Model - MCO-17AI

SN - 90705826

Inside dimensions - D51 W49 H66.5cm

3 Shelves 46 x 46cm

1 Tray 46.5 x 36.5 x 4cm

1x Sanyo CO2 Incubator:

Model - MCO-17AIC

SN - 10100758

Inside dimensions - D51 W49 H66.5cm

2 Shelves 46 x 46cm

1 Tray 41 x 31 x 5cm

£ 265.00 (ex. VAT) 3 in stock

Thermo Scientific Thermo 30 Model - 806 Liquid Nitrogen Dewar Lab

ITEM-25473

This Thermo Scientific Thermo 30 Model - 806 Liquid Nitrogen Dewar was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has some marks from use. It has not been tested.

It has a 32L Capacity.

We have multiples of this unit in stock. You may not receive the one in the photos but you will receive one in almost identical condition. If you would like photos of the one you have purchased before it is dispatched we can provide this.

£ 265.00 (ex. VAT) 1 in stock

Sorvall Heraeus 75006435 5850rpm Swing Arm Centrifuge Rotor with Buckets Lab

ITEM-19091

This Sorvall Heraeus 75006435 5850rpm Swing Arm Centrifuge Rotor with Buckets was removed from a university lab where it was surplus to requirements.

It is in good used condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used again.

It is supplied with 4 Buckets.

Max Load: 600g

Max Speed: 5.850rpm.

Max Cycles: 22.000.

Autoclavable 121˚c.

£ 260.00 (ex. VAT) 1 in stock

Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E Lab Faulty CO2 Sensor

ITEM-20233

This Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). The temperature sensor was replaced and seems to be working as it should. However, the unit appears to have a faulty CO2 sensor and will not regulate properly.

When set at 37ºC the display showed 37˚C and our thermometer read 37.7ºC

When set at 55ºC the display showed 58.4˚C and our thermometer read 55.5ºC

Unit dimensions L68cm x W65cmx H103cm

Interior dimensions:

H60cm x W50cm x D48cm

£ 260.00 (ex. VAT) 1 in stock

Mettler Toledo 340 pH Meter with Probe Lab

ITEM-38367

Mettler Toledo 340 pH Meter with Probe

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

General Laboratory

Filters