General Laboratory

£ 350.00 (ex. VAT) No longer available

Grant JB Aqua 26 Water Bath 26 Litre Lab

ITEM-45151

Grant JB Aqua 26 Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good used cosmetic condition, showing signs of general use.

The unit powers up and is in good working order.

£ 350.00 (ex. VAT) 1 in stock

Microflow Laminar Flow Workstation Model: 5054811 Lab

ITEM-42126

Microflow Laminar Flow Workstation

This item was removed from a university where it was surplus to requirement.

It is in reasonably good condition with some wear, including rust spots and surface damage.

The unit powers on and is in good working order.

Specifications.

Model: 5054811
Serial No.: 97/06/6/07

£ 350.00 (ex. VAT) No longer available

5 x New Brunswick CO2 Back Up Premium Controls Lab

ITEM-45224

5 x New Brunswick CO2 Back-Up Controls

These items were removed from a university where they were surplus to requirements.

The controls are in fair cosmetic condition, showing signs of general use.

Each unit powers on, but no further testing has been conducted.

Serial Numbers:

FCBSEJ700489
FCBSGN301329
FCBSII701705
FCBSEQ100664
FCBSJL802093

£ 340.00 (ex. VAT) 1 in stock

Taylor-Wharton 35HC Liquid Nitrogen Cryogenic Storage Dewar

ITEM-41588

Taylor-Wharton 35HC Liquid Nitrogen Cryogenic Storage Dewar

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 340.00 (ex. VAT) 1 in stock

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

ITEM-35400

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. No buckets are supplied.

Maximum RPM: 5650.

Maximum Load: 2 x 500g.

£ 340.00 (ex. VAT) 1 in stock

Nuaire Biosafety Cabinet Stand for 1200mm Wide Safety Cabinet Lab

ITEM-25190

Nuaire Biosafety Cabinet Stand for 1200mm Wide Safety Cabinet

The unit is in good cosmetic condition with minor marks.

It is not a solid unit, and is bolted together.

71x118x83cm LWH

£ 330.00 (ex. VAT) 1 in stock

Taylor Wharton CX500 Liquid Nitrogen Dewar Lab

ITEM-37006

Taylor Wharton CX500 Liquid Nitrogen Dewar

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks but has not been tested.

£ 330.00 (ex. VAT) 1 in stock

Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank DewarLab

ITEM-29810

This Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank Dewar was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use. There are no rack inserts supplied.

65cm diameter, 69cm w/o wheels, 81cm w/ wheels.

Inner - 11 x 4 x 13cm approx.

Outer - 14 x 14 x 24cm approx.

Wheels - 7.8kg, main unit - 34.8kg. 43.6kg combined.

£ 320.00 (ex. VAT) 1 in stock

Mettler Toledo SevenMulti With Mettler Toledo RS-P42 and inLab Expert Pro System

ITEM-38120

Mettler Toledo SevenMulti With Mettler Toledo RS-P42 and inLab Expert Pro System

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test them further at our facility.

The Printer System has a password that is available on request.

The system comprises the following:

Mettler Toledo SevenMulti
Mettler Toledo RS-P42
Mettler Toledo inLab 731
Mettler Toledo inLab Expert Pro

£ 320.00 (ex. VAT) 1 in stock

Mettler Toledo 20KG Calibration Weight M1 Lab

ITEM-31756

Mettler Toledo 20KG M1 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks from use.

£ 315.00 (ex. VAT) 1 in stock

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

ITEM-35871

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

£ 315.00 (ex. VAT) 1 in stock

Mettler Toledo M1 Class 20KG Calibration Weight 11117725 Lab

ITEM-31754

Mettler Toledo 20KGF2 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks and cracks from use. The top of the case is broken.

£ 315.00 (ex. VAT) 1 in stock

BECKMAN JA-20 Fixed Angle Rotor Lab

ITEM-41409

BECKMAN JA-20 Fixed Angle Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has not been tested.

Specifications:

Type: JA-20
Serial Number: E.21076
Maximum RPM: 20,000
Capacity: Holds 8 x 50ml tubes
Included: Manual

£ 310.00 (ex. VAT) 1 in stock

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System Lab

ITEM-38469

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Max Pressure inlet - 0.7/10

Max Pressure Working - 5.5/80

Comes with :

2 X ELGA Labpure S1 - Part No. LC182

2 X ELGA Sanitisation Block - Part No. LA698

1 X UV Filter

1 X ELGA Ultrafiltration Cartridge - Part No. LC151

£ 310.00 (ex. VAT) 1 in stock

Mettler Toledo 20KG Calibration Weight M1 Class 11117725 Lab

ITEM-31755

Mettler Toledo 20KGF2 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks and cracks from use.

£ 310.00 (ex. VAT) 1 in stock

Labnet Vortemp 56 Microplate Shaking Incubator Lab

ITEM-24398

This Labnet Vortemp 56 Microplate Shaking Incubator was removed from a university lab where it was surplus to requirements.

The item powers on and runs up to 120rpm.

It was tested with a digital thermometer (not included).

When the temperature was set to 37˚c, the thermometer read 35˚c.

When the temperature was set to 99.5˚c, the thermometer read 94˚c.

Both temperatures were reached relatively quickly.

It holds 56 x 2.0ml tubes.

The item is in reasonably good used cosmetic condition with marks and scratches.

£ 305.00 (ex. VAT) 1 in stock

Mettler Toledo 20KG M1 Class Calibration Weight Lab

ITEM-31058

Mettler Toledo 20KG M1 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has been cracked slightly.

£ 305.00 (ex. VAT) No longer available

Whirlpool Automatic Ice Maker Machine Model - K10 Lab

ITEM-24430

This Whirlpool Automatic Ice Maker Machine Model - K10 was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It's in reasonably good cosmetic condition with some marks from use.

Because it was removed from a lab, this is being sold for strictly lab use only.

£ 305.00 (ex. VAT) 1 in stock

LMS Cooled Laboratory Incubator Model: 305 Lab

ITEM-22066

This LMS Cooled Laboratory Incubator Model: 305 was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition but the door has rust marks and scratches. The exterior also has scratches and dents. The red light is loose and not secured and there is some mould along the seal.

We had a note from the lab saying there was an issue when setting the temperature. Setting it to refrigerate was a little temperamental but it does work.

Internal dimensions:

36cm D x 46cm W x 54cm H

It was tested with a digital thermometer (not included)

When set to -10˚C, the display showed -6.1˚C and the thermometer measured -8.7˚C

When set to 37˚C, the display showed 37˚C and the thermometer measured 34.7˚C

When set to 50˚C, the display showed 50.2˚C and the thermometer measured 47.6˚C

When set to 4˚C, the display showed 7.3˚C and the thermometer measured 4˚C

£ 300.00 (ex. VAT) 1 in stock

Beckman JA-20 20,000 RPM Centrifuge Rotor Lab

ITEM-26437

This Beckman JA-20 20,000 RPM Centrifuge Rotor was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition but does have marks from use.

It has not been tested and will need to be inspected for safety by a qualified technician before it can be used again.

It fits 20ml sample tubes.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Kelvitron B 6030 Incubator Lab

ITEM-45013

Heraeus Kelvitron B 6030 Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in fair cosmetic condition and powers on. The unit has been tested and is in good working order (thermometer not included).

Specifications:

Model: B 6030
Serial No.: 51017988

£ 300.00 (ex. VAT) 1 in stock

Cell Bank Fersht Group Dewar Lab

ITEM-44611

Cell Bank Fersht Group Dewar Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic, but we are unable to test it further at our facility.

Also included:

6 x Container Sample Racks

1 x Skate on Wheels

£ 300.00 (ex. VAT) 1 in stock

Fisher Scientific DMU12 12L Water Bath Lab

ITEM-41486

Fisher Scientific DMU12 12L WaterBath Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

No lid included.

£ 300.00 (ex. VAT) 1 in stock

Gallenkamp Economy Incubator Size 1 Lab

ITEM-40049

Gallenkamp Economy Incubator Size 1

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. It was tested with a digital thermometer (not included).

It is in good working order.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge 13 Centrifuge Lab

ITEM-37826

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.

We are unable to test this item further at our facility.

18 sample holders.

£ 300.00 (ex. VAT) 1 in stock

IKA Roller 10 Digital Lab Spares/Repairs

ITEM-36754

This IKA Roller 10 Digital was removed from a university lab where it was surplus to requirements.

The unit powers up with a 24V DC supply (not included).

Error 4 is displayed a few seconds after starting a run - 'Motor blockage or overload'. We followed the troubleshooting part of on online manual, but were unable to clear the error.

It is in otherwise good cosmetic condition with marks from use.

It is sold for spares/repairs.

£ 300.00 (ex. VAT) 1 in stock

MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab

ITEM-36610

MSE Falcon 6/300 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.

This item also includes the following:

1 x Mistral MSE Rotor - 43124

Capacity: 4 x 750ml
SN: 986766
Max RPM: 2500
(There are no rotor buckets included)

£ 300.00 (ex. VAT) 1 in stock

LMS Cooled Benchtop Laboratory Incubator Lab

ITEM-30499

This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included)

The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.

When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours.

The item is in a reasonable, used cosmetic condition with some minor marks from use.

Internal dimensions - D33 W45 H53cm

£ 300.00 (ex. VAT) 1 in stock

Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank Lab

ITEM-29811

This Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use.

Capacity: 60 litre

Build year: 1995

£ 300.00 (ex. VAT) 1 in stock

LTE Model-322/0102/00 Drying Cabinet Lab

ITEM-45221

LTE Model-322/0102/00 Drying Cabinet Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

Specifications:

S/N: K19822/3
Model: 322/0102/00

£ 300.00 (ex. VAT) 1 in stock

Beckman Microfuge 22R Refrigerated Centrifuge with F241.5P 14000rpm Rotor Lab

ITEM-23948

This Beckman Microfuge 22R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

This unit came out of a working laboratory where it was in use until recently. The unit is in very good condition with very few marks.

We powered the unit on with no issues and it worked at 14000 rpm smoothly. The display screen is in very good condition with clear figures. There is a slight squeal when running. It has been fully temperature tested and is in working order.

The rotor is a F241.5P with 24x2 mL / 11x39 mm(24x2 mL / 0x2 in) tube apertures angled at 45 degrees. The plastic lid fits securely and has no damage.

£ 295.00 (ex. VAT) 1 in stock

Memmert WNE 10 Water Bath 10L Lab

ITEM-35873

Memmert WNE-10 Water Bath 10L

This was removed from a university lab where it was surplus to requirements.

The unit is in full working order. it has been tested against a digital thermometer (not included).

It is in reasonable cosmetic condition but is very stained inside.

£ 295.00 (ex. VAT) 1 in stock

Protex Model/Type - VB FH Ventilated Workstation Lab

ITEM-31713

Protex Ventilated Workstation Model/Type - VB FH

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with minor marks from use.

It has not been tested as it needs a power cable wired up.

Workstation surface - 140 x 70cm

Cabinet dimensions L95 W55 H54

Internal - D49.5 W94 H53

£ 290.00 (ex. VAT) 1 in stock

Tritech Research DT2-MP-47L Digitherm Heating and Cooling Benchtop Incubator Lab

ITEM-24691

This Tritech Research Digitherm was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The temperature and time are controlled by a Tritech DigiTherm box on top of the unit. There are 3 buttons - + and Menu all of which are responsive and guide you through the menu display.

It has been tested at 3, 18, 37 and 65˚C and holds temperature well on all settings. The digital thermometer from the photos is not included.

Symbol Power Supply:

Part No. 50-14001-004

Interior dimensions:

W29cmx H45cm x D42cm

£ 290.00 (ex. VAT) 1 in stock

Millipore Water Purification System Model - RiOs 5 Cat no. ZR0S5005Y Lab

ITEM-24389

Millipore Water Purification System Model - RiOs 5 Cat no. ZR0S5005Y

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with some marks from use.

NEW ITEM

£ 285.00 (ex. VAT) 1 in stock

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems

ITEM-39679

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems

This was removed from a university lab where it was surplus to requirements.

The unit is brand new an unused.

The box contains the following;

Organic Adsorption Cartridge x2

Part#: UHQ-1

Ion Exchange Cartridge x2

Part# UHQ-2

£ 285.00 (ex. VAT) 1 in stock

Hermle Z 400 Benchtop Centrifuge with Rotor Lab

ITEM-37869

This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs up to 12500rpm.

It is in reasonable cosmetic condition with marks from use.

£ 285.00 (ex. VAT) 1 in stock

Job Lot of Lancer Dishwasher/Drier Parts - Racks, Spraying Heads, Rails Lab

ITEM-25975

Job Lot of Lancer Dishwasher/Drier Parts

This was removed from a university lab where it was surplus to requirements.

Included are;

1 x 64cm L x 64cm W x 19cm H rack.

3 x 64cm L x 64cm W x 13cm H racks.

3 x Braided hoses.

4 x Rack rails.

4 x 14.5cm Spraying heads.

1 x 49cm Spraying head.

1 x 63cm Spraying head.

3 x Metal baskets/filters.

£ 285.00 (ex. VAT) 1 in stock

Taylor-Wharton 10XT Cryogenic Liquid Nitrogen Storage Dewar/Tank Lab

ITEM-17356

This Taylor-Wharton 10XT Cryogenic Liquid Nitrogen Storage Dewar was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition with some marks from use.

It has not been tested and has no racking with it.

£ 280.00 (ex. VAT) 1 in stock

Grant JB Aqua 12 Plus Water Bath Lab

ITEM-41822

Grant JB Aqua 12 Plus Water Bath Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition, with some rust damage internally.

£ 280.00 (ex. VAT) 1 in stock

Captair Ductless Filtration System Type 5000 C Lab

ITEM-27501

This Captair Ductless Filtration System Type 5000 C was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It is in reasonable cosmetic condition with marks form use.

Carbon Filter inside - Type C-100

Size - 755 x 405 x 100mm

Unit size - L81 W45 H33cm

£ 280.00 (ex. VAT) No longer available

Fisher Scientific accuSpin Micro with 13000rpm Rotor Cat No. 75003245 Lab

ITEM-25990

This Fisher Scientific accuSpin Micro with 13000rpm Rotor was removed from a university lab where it was surplus to requirements.

The unit is in good used cosmetic condition but it does have various signs of general use.

The lid opens, the brake is working and all buttons appear to be responsive. The LCD screen is working and displays clearly.

The unit has been tested up to the max speed of 13,000rpm. It runs smoothly and as it should.

The rotor included is a;

Heraeus Rotor Model #3325B

•F 178953 PP 3/00

• Max Speed 13000 rpm

• Max load 24x4g

24x 2.0 tube flat cap holders

£ 275.00 (ex. VAT) 1 in stock

Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface - 7544-06 Lab

ITEM-27760

Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface. These were removed from a university lab where they were surplus to requirements.

Included are;

1 x Pump Drive: Model No. 7544-06 Speed 6rpm

The unit powers on and is in good cosmetic condition. The motor moves smoothly.

We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.

1 x Pump Drive: Model No. 7544-20 Speed 20rpm

The unit powers on and is in good cosmetic condition. The motor moves smoothly. We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.

1 x Liquid Level Interface Model LI-08/B01 The unit is in good cosmetic condition.

2x Pump Heads:

Model No. 7014-20

Part No. 3.358.609

2x Masterflex Norprene tubing

Model No. 6404-14

£ 270.00 (ex. VAT) No longer available

Eppendorf 5417C Benchtop Centrifuge with Aerosoltight GE 035 11/01 Rotor Lab

ITEM-30269

This Eppendorf 5417C Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs up to 20,800rpm but is a little loud at max speed.

It is in reasonably good cosmetic condition but has a small crack on the bottom left of the unit.

It is fitted with an Eppendorf Aerosoltight GE 035 11/01 Rotor which holds 30 x 2ml tubes

£ 270.00 (ex. VAT) 1 in stock

J. Bibby Water Still Model W14S Lab

ITEM-38416

J. Bibby Water Still Model W14S

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Serial No. W14S 85/1168

£ 270.00 (ex. VAT) 1 in stock

Buchi R-210 Rotavapor Lab

ITEM-41940

Buchi R-210 Rotavapor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Adjustable height: 47cm to 57cm

NEW ITEM

£ 265.00 (ex. VAT) No longer available

Thermo Scientific Cimarec 7x7" Hotplate Model HP88857105 Lab

ITEM-31926

This Thermo Scientific Cimarec 7x7" Hotplate Model 88857105 was removed from a university lab where it was surplus to requirements.

The unit is brand new and has only been used for our testing. It is in full working order.

The item comes in original packaging box with operating manual and IEC Lead.

£ 265.00 (ex. VAT) 2 in stock

Thermo Scientific Thermo 30 Model - 806 Liquid Nitrogen Dewar Lab

ITEM-25473

This Thermo Scientific Thermo 30 Model - 806 Liquid Nitrogen Dewar was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has some marks from use. It has not been tested.

It has a 32L Capacity.

We have multiples of this unit in stock. You may not receive the one in the photos but you will receive one in almost identical condition. If you would like photos of the one you have purchased before it is dispatched we can provide this.

£ 265.00 (ex. VAT) No longer available

Sorvall MT-2 Ultra Microtome Porter Blum w/ Operating Manual Lab Laboratory

ITEM-06909

This has been pulled from a working environment
Model- MT-2
This item powers up but has not been tested further.
Operating manual included
115V

£ 260.00 (ex. VAT) 1 in stock

Electrothermal Slide Drying Bench Model MH6616 Lab

ITEM-45550

Electrothermal Slide Drying Bench MH6616 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

General Laboratory

Filters