Items 621 to 640 of 1062

Image of item

NEW ITEM

NEW ITEM

£ 375.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Culture Flask Adapter 75008383 Lab

ITEM-35732

Thermo Scientific Sorvall Culture Flask Adapter 75008383


This was removed from a working lab where it was surplus to requirements.


The item is in brand new condition in its original packaging.

For processing Nunc™ T-75 or T-25 EasyFlasks™ in Thermo Scientific Sorvall Legend™ T/RT Centrifuges.




Image of item

£ 375.00 (ex. VAT) 1 in stock

Watson Marlow 505S Peristaltic Pump Lab

ITEM-36758

This Watson Marlow 505S Peristaltic Pump was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order in both directions.


It is in reasonably good cosmetic condition with marks from use.

Image of item

£ 375.00 (ex. VAT) 1 in stock

Gilson Minipuls 3 Pump Head R2 For Peristalic Pump Part#: F117800 Lab

ITEM-36110

Gilson Minipuls 3 Pump Head R2 For Peristalic Pump Part#: F117800


This was removed from a university lab where it was surplus to requirements.


Item is in good used condition with minor surface damage.


It comes with the original packaging.

Image of item

£ 375.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm Lab

ITEM-36319

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm


These were removed from a university lab where they were surplus to requirements.


4x Eppendorf Centrifuge Swing Buckets S-4x750

M/N: NL017

Date: 03/13

Max RPM: 4800


These are in good cosmetic condition on the outside, but are slightly corroded and pitted on the inside.


They have not been tested.


Image of item

£ 375.00 (ex. VAT) 1 in stock

Panasonic MIR-554-PE Cooled Incubator Lab Spares/Repairs

ITEM-20210

This Panasonic MIR-554-PE Cooled Incubator was removed from a university lab where it was surplus to requirements.


The unit powers and incubates well, but has a faulty cooling system.


It is in otherwise good cosmetic condition with minor marks.


It is sold for spares/repairs


Interior dimensions:

D52cm x W64cm x H127cm


Image of item

£ 370.00 (ex. VAT) 1 in stock

WTW TS606/2-i Compact Thermostatic Cabinet Lab Incubator

ITEM-31865

This WTW TS606/2-i Compact Thermostatic Cabinet was removed from a university lab where it was surplus to requirements.


4x Schuko internal sockets.


Volume: 180 litres


1x Instruction Manual.


Image of item

£ 370.00 (ex. VAT) 1 in stock

Torrey Pines Echotherm Scientific Chilling Laboratory Incubator IN30-2 Lab

ITEM-31061

Torrey Pines Scientific Chilling Laboratory Incubator  Model - IN30-2


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.


Internal Dimensions - D25.5 W36 H30.5cm

2 Shelves - 23.5 x 35cm


It is in good cosmetic condition with minor marks from use.

Image of item

£ 365.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator Model - MCO-18AIC Lab

ITEM-26275

This Sanyo CO2 Laboratory Incubator  Model - MCO-18AIC was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included).


It is in reasonably good cosmetic condition with some marks from use.


The temperature was set to 37˚c and charged with 5% CO2 - The CO2 Kicked in when the temperature reached 37˚c. When at 37˚c, the thermometer read 39˚c.

The temperature was then set to its maximum of 50˚c which it reached about an hour or so later. The thermometer read 52°c.


External dimensions - D72 W64 H91cm

Internal - D51 W50 H66cm

3 Shelves - 45 x 45cm

1 Tray - 35 x 32cm






Image of item

£ 365.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 2100 Laboratory Platform Shaker Lab

ITEM-26271

This New Brunswick Scientific Innova 2100 Laboratory Platform Shaker was removed from a university lab where it was surplus to requirements.


The unit powers up and is in reasonable cosmetic condition. The sticky pads on top are worn and will likely need to be replaced.


It runs up to 500rpm smoothly.


Platform size 61 x 46cm

Base 54 x 48cm




Image of item

£ 365.00 (ex. VAT) 1 in stock

Union Carbide 35HC Liquid Nitrogen Cryogenic Storage Dewar (35L) Lab

ITEM-17354

This Union Carbide 35HC Liquid Nitrogen Cryogenic Storage Dewar was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition but has marks from use.


It has not been tested.

Image of item

£ 360.00 (ex. VAT) 1 in stock

Orion Blending Karl Fischer Volumetric Titrator Model - TURBO2 Lab

ITEM-27544

This Orion Blending Karl Fischer Volumetric Titrator  Model - TURBO2 was removed from a university lab where it was surplus to requirements.


The item powers on and appears to be in working order.


It is in a reasonable, used cosmetic condition with marks and stains.


Image of item

£ 360.00 (ex. VAT) 1 in stock

Neslab RTE-101 Refrigerated Water Bath Circulator Type - R-134A

ITEM-30197

This Neslab RTE-101 Refrigerated Water Bath Circulator Type - R-134A was removed from a university lab where it was surplus to requirements.


The item powers on and is in a reasonable, used cosmetic condition.


The uni powers up and has been tested with a digital thermometer (not included).


Chilling:-

The temperature was first set to its minimum setting of -30˚c, it dropped as low as -13˚c before it started to climb back up. This is likely due to the concentration of antifreeze used.


Heating:-

The temperature was set to 37˚c and it climbed from -12 to 37˚c within 10 minutes.

The temperature was finally set to it's maximum of 155˚c but when it reached boiling point at 100˚c we switched it off.


Image of item

£ 360.00 (ex. VAT) 1 in stock

Kuhner LS-W Lab Shaker Benchtop Orbital Platform Lab

ITEM-23933

This Kuhner LS-W Benchtop Orbital Platform Laboratory Shaker was removed from a university lab where it was surplus to requirements.


This unit came out of a university surplus equipment store. It had been unused for a while.


We powered the unit up with no issues. The unit worked faultlessly. We tested it through its range of speeds with no problems. There is a bed attached with a couple of attachments.


The maximum speed is 500 rpm.



The unit is in good condition with some marks of age and usage.


Image of item

£ 355.00 (ex. VAT) 1 in stock

ALC PK121 Multispeed Benchtop Centrifuge Lab

ITEM-37031

ALC PK121 Multispeed Benchtop Centrifuge


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


Rotor - T515

SN - 0197/01

Max 4300rpm

Max Load 2.00kg


4 x ALC Buckets P509

4 x ALC Adaptors - R2042 (Cat no. 11172442) Holds 3 x 12-15ml tubes each


Image of item

£ 355.00 (ex. VAT) 1 in stock

Envair Bio 2+ Class 2 Microbiological Safety Cabinet Lab

ITEM-31184

This Envair Bio 2 Class 2 Microbiological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


The unit powers up and the airflow and light is working. The UV is not working.


Cabinet dimensions - D70 W125 H139cm

Frame dimensions - D61 W122 H83cm

Internal workspace dimensions - D56 W106 H71cm


The item is in a reasonable, used cosmetic condition.


Image of item

£ 355.00 (ex. VAT) 1 in stock

Applikon Biotechnology AppliFlex Bioreactor Laboratory Rocker w/ Spares Lab

ITEM-31056

This Appikon Biotechnology AppliFlex Bioreactor Laboratory Rocker was removed from a lab where it was surplus to requirements.


The unit powers up and is in full working order up to 25rpm.


It is in good cosmetic condition with minor marks from use.



It comes with spares:

2 x Heat mats - 40 x 58cm

1 x Heat mat - 11 x 8cm

1 x Probe

2 x 50L Platforms

4 x 20L Platforms (one fitted to Rocker)


Dimensions - L56 W58 H54 (with 20L platform) 32cm without


Image of item

£ 355.00 (ex. VAT) 1 in stock

Beckman Coulter Allegra 6R Refrigerated Centrifuge w/ 3900rpm Rotor Lab

ITEM-23469

This Beckman Coulter Allegra 6R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.



The unit Powers on and is in good cosmetic condition. The unit spins, but the brake button does not appear to work and takes the unit a long time to come to a stop.


The centrifuge has been tested and runs well. The refrigeration/incubation was also tested with a digital thermometer (not included).


When set to 3ºC the needle aimed at 2ºC

When set to -10ºC the needle aimed at -5ºC

When set to 37ºC the needle aimed at 32ºC



Swinging buckets:

2x SX4750 max 4750rpm

2x GH-3.8 max 3750 rpm

750ml capacity

The units are in good cosmetic condition with some light scuff marks from general use.


Tube adaptors:

2 sets of 12x15ml tube adaptors

2 sets of 4x50ml tube adaptors

The units are in good cosmetic condition.



Image of item

£ 350.00 (ex. VAT) 1 in stock

Grant GD120 Stirred Water Bath Lab

ITEM-36533

Grant GD120 Stirred Water Bath


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition with minor marks.



Image of item

£ 350.00 (ex. VAT) 1 in stock

Mettler Toledo FiveEasy F20 pH/mV Bench Meter Lab

ITEM-40928

Mettler Toledo FiveEasy F20 pH/mV Bench Meter Lab


This item was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


It is in excellent cosmetic condition and still have the protective film on the screen.


Power supply not included.

Image of item

£ 350.00 (ex. VAT) 1 in stock

Liebherr Comfort Freestanding Freezer Lab

ITEM-36340

Liebherr Comfort Freestanding Freezer


This item was removed from a university lab where it was surplus to requirements.


Apart from the absence of its handle, this item is in fairly good cosmetic condition.


The unit powers up and is in full working order. It was tested with a digital thermometer (not included).


Items 621 to 640 of 1062

Filters

Price (£)

to

Condition