Items 1 to 20 of 96

Image of item

£ 4,750.00 (ex. VAT) 1 in stock

Sprintex Callis Therapy Treadmill Running Machine

ITEM-35097

Sprintex Callis Therapy Treadmill Running Machine


This was removed from a university lab where it was surplus to requirements.


The unit is in good working order, and good cosmetic condition with minor marks. It runs up to a speed of 18.7km/h.



Image of item

£ 3,110.00 (ex. VAT) 1 in stock

Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer

ITEM-29641

This Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer was removed from a university lab where it was surplus to requirements.


The unit is in excellent cosmetic condition with little to no marks from use.


The lab reported that the unit cost around 60K when new. The item is in working condition. The manufacturer has gone into Administration so unable to offer further support for the printer.


Build Volume: 200mm x 157mm x 150mm.






Image of item

£ 2,945.00 (ex. VAT) 1 in stock

Seward Rondo Pastry Brake - Dough Sheeter Type KDWn 094

ITEM-38411

Seward Rondo Pastry Brake - Dough Sheeter


This was removed from a commercial kitchen where it was surplus to requirements.


The two pastry belts have heavy signs of wear and use


This pastry brake has been tested and all functions are working although the pastry belts are heavily worn.


Roller height lever to control thickness of pastry, between 0.5 cm and 25cm


Aluminium flour tray 48cm x 12cm x 7cm

Work height 90cm

Retractable wooden extension shelf, 60cm x 40cm

Working width 90cm, length with shelf extended 275cm, height 115cm

Storage compartment under belt area 88cm x 65cm x 65cm


Image of item

£ 1,815.00 (ex. VAT) 1 in stock

IAC Acoustics Audiology / Soundproof Room/Booth 552x387x264cm LWH Lab

ITEM-24030

This IAC Acoustics Audiology / Sound Proof Room/Booth is being sold on behalf of a client. It is surplus to requirements.


This unit is still on the client's premises.


It is of steel construction and the room has electrics installed and ventilation. There is a window at the examiner's desk to observe the occupant.


The unit is in very good condition and is fully operational.


This room is available on a strict collection-only basis from York, UK. Any collecting buyer will require appropriate RAMS and insurance.

Image of item

£ 1,675.00 (ex. VAT) 1 in stock

IAC Sound Proof Soundproof Booth Room 206x222x260cm LWH

ITEM-31057

This was removed from a university where it was surplus to requirements.


The booth is in good cosmetic condition with marks from use.


It is currently disassembled at our facility in Caerphilly.


Dimensions

External dims H-260cm W-206 D-222cm

Window 69cm x 69cm

Letterbox type hole 20Lx10Hx10d

Door opening W 84cm H 87cm

Internal 182W 193L 200H


Image of item

£ 1,525.00 (ex. VAT) 1 in stock

DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector

ITEM-25509

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.


The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching.


There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver.


Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta


The remote control was tested and is in working order.


Image of item

£ 1,500.00 (ex. VAT) 1 in stock

Marrutt Laboratory Darkroom Two Way Revolving Rotary Door Lab

ITEM-38742

Marrutt Laboratory Darkroom Two Way Revolving Rotary Door


This was removed from a university lab where it was surplus to requirements.


The door is a bit stiff to operate but is in good working order. It is in good cosmetic condition with marks from use.


Inside Dimensions: Wx85cm Dx85cm Hx200cm.


Also included are two rubber non slip mats for entry and exit of the Darkroom Door.


Image of item

£ 1,370.00 (ex. VAT) 1 in stock

Stratasys Dimension Elite 3D Printer PN - 180-00105 & Accessories

ITEM-31388

This Stratasys Dimension Elite 3D Printer was removed from a university lab where it was surplus to requirements.


The item powers on and runs through calibration upon start up. We were unable to test it further at our facility but we contacted the lab and they said the following;


0.1mm tolerance on prints, some post-print cleaning is necessary. It can be a bit temperamental. The heat heads require cleaning each time the printer is used. it could do with a complete service and replacement heads.


The item is in a good, used cosmetic condition aside from a small scratch on the back.


With it are;

Cartridges (all boxes have remaining percentages written on them) :-

1 x ABS-P430 Model (Olive Green) 4%

1 x Nectarine 4%

2 x Nectarine 10%

1 x White 3%

1 x Yellow 12%

1 x Yellow 98%

1 x Blue 3%

1 x Black 14%

1 x Black 6%

1 x Red (unmarked)


Also included:-

2 x Boxes containing 50 Modelling Bases (PN-340-00200)

2 x Dimension System Software Discs

2 x Spare Bulbs

Tool kit

Wire brush

Anti-Sieze Lubricant

2 x Keys

Ethernet Cable

IEC Lead

5 x Spare Fans


Unit dimensions - L92 W69 H172cm

Storage Compartment - L75.5 W65 H45.5cm


Image of item

£ 1,300.00 (ex. VAT) 1 in stock

DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector

ITEM-25512

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.


The unit powers up and the lamp is working but we were unable to connect it to any of our equipment to test it further. It comes with cables and a remote control which is fully working.


Lens - Christie Digital Systems zoom XGA/SXGA 2.2-4.0:1 Minolta



Image of item

£ 1,215.00 (ex. VAT) 1 in stock

Projet 460 Plus 3D Advanced Printer

ITEM-35306

This Projet 460 Plus 3D Advanced Printer was removed from a university lab where it was surplus to requirements.


The unit powers up and runs through the boot sequence without fault.


It is in good cosmetic condition with minor marks from use.


Internal dimensions are: L111cm x W45cm x H46cm.

Image of item

£ 1,140.00 (ex. VAT) 1 in stock

IAC Acoustics Audiology / Soundproof Room/Booth 183x162x247cm LWH

ITEM-24032

This IAC Acoustics Audiology / Sound Proof Room 183x162x247cm is being sold on behalf of a client


This unit is still on the client's premises.


It is of steel construction and the room has electrics installed and ventilation. There is a window at the examiner's desk to observe the occupant.


The unit is in very good condition and is fully operational.


This room is available on a strict collection-only basis from York, UK. Any collecting buyer will require appropriate RAMS and insurance.

Image of item

£ 950.00 (ex. VAT) 1 in stock

4 x Mobili Office White Table Tops - 120 x 80 x 3cm & 100 x 80 x 3cm

ITEM-36980

4 x Mobili Office White Table Tops - 120 x 80 x 3cm & 100 x 80 x 3cm


These were removed from a working lab where they were surplus to requirements.


3 Sized - 120 x 80 x 3cm

1 Sized - 100 x 80 x 3cm (missing one of the cable hole covers)


Comes with 12 x Metal Parts (they aren't legs, some sort of support brackets/ beams) - 3 per table top.


They are not supplied with legs.


Image of item

£ 885.00 (ex. VAT) 1 in stock

Viglen Genie P3 65O PC with BOMEM Software

ITEM-28402

This PC was removed from a BOMEM DA3 Series Spectrophotometer System


Viglen PC w/ Galatic Protection Plug


Genie P3 65O


OS: Windows 95


The PC powers on and is in good cosmetic condition.

There are some surface marks from general use.


The PC automatically logs in.


There is a slight rattling noise coming from the fan.

The bearings may have gone due to the age of the PC. This does not seem to affect the operation and we have deemed that a repair is not required.


Software:

Bomem Grams_32

Version 4.04


Bomem DA Series Acquisition Program

Version 1.4

May 19, 2000


Galatic Protection Plug:

Type Y

25 Pin


Image of item

£ 800.00 (ex. VAT) 1 in stock

Set of IFF Advanced Stage Rigging Equipment Pantograph TOP 2C

ITEM-25506

These were removed from a university where they were surplus to requirements.


Included are;


4 x TOP 2C

6 x Smaller parts


The units are in reasonably good cosmetic condition but have been used.


Image of item

£ 700.00 (ex. VAT) 1 in stock

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer

ITEM-38890

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer


This was removed from a university catering department. It was surplus to requirements.


The unit has not been tested as we do not have a gas supply at our facility.


It is in reasonably poor cosmetic condition and is in need of a deep clean, and some maintenance.



Image of item

£ 695.00 (ex. VAT) 1 in stock

Torrents T54 Dual Bread Slicer

ITEM-38405

Torrents T54 Dual Bread Slicer


This was removed from a commercial kitchen where it was surplus to requirements.


The unit powers up and is in working order.


It is in good cosmetic condition with marks from use.

Image of item

£ 615.00 (ex. VAT) 1 in stock

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616

ITEM-24762

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616


This was removed from a university where it was surplus to requirements.


The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly.


The fans are working but it has not been tested further.




Image of item

NEW ITEM

NEW ITEM

£ 575.00 (ex. VAT) 1 in stock

15 x Extreme Networks LX4 XENPAK Model - 10114 900369-10-02

ITEM-19293

15 x Extreme Networks LX4 XENPAK Model - 10114 Modules


These were removed from a university AV department where they were surplus to requirements.


They are all brand new and sealed in the boxes.

Image of item

£ 565.00 (ex. VAT) 1 in stock

Seal 44 Ultra Laminator

ITEM-35543

Seal 44 Ultra Laminator


This was removed from a university lab where it was surplus to requirements


The unit powers up, heats and rolls well when controlled by the foot pedal. We did not have a second roll of lamination film, so could not test it further. We see no reason why it wouldn't work.


It is in good cosmetic condition with minor marks.

Image of item

£ 550.00 (ex. VAT) 1 in stock

6 x Calumet Genesis 300B Portable Studio Photography Lights Flash Heads

ITEM-21211

6 x Calumet Genesis 300B Portable Studio Photography Lights


These were removed from a university where they were surplus to requirements.


We have tested all of the lamps and all are working correctly. Four of the lamps have bulbs and two are missing.


The lamps are all in very good condition with minor age and usage marks. All come with shades.


The lamp's dimensions are 33cm (L)x 20cm (W)x 20cm (H). This includes the bracket. Each unit is approximately 2kg in weight.


Also included is a manual.


Items 1 to 20 of 96

Filters

Price (£)

to

Condition