IT & AV
Items 1 to 20 of 62
£ 3,110.00 (ex. VAT) 1 in stock
Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer
ITEM-29641
This Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer was removed from a university lab where it was surplus to requirements.
The unit is in excellent cosmetic condition with little to no marks from use.
The lab reported that the unit cost around 60K when new. The item is in working condition. The manufacturer has gone into Administration so unable to offer further support for the printer.
Build Volume: 200mm x 157mm x 150mm.
£ 1,815.00 (ex. VAT) 1 in stock
IAC Acoustics Audiology / Soundproof Room/Booth 552x387x264cm LWH Lab
ITEM-24030
This IAC Acoustics Audiology / Sound Proof Room/Booth is being sold on behalf of a client. It is surplus to requirements.
This unit is still on the client's premises.
It is of steel construction and the room has electrics installed and ventilation. There is a window at the examiner's desk to observe the occupant.
The unit is in very good condition and is fully operational.
This room is available on a strict collection-only basis from York, UK. Any collecting buyer will require appropriate RAMS and insurance.
£ 1,675.00 (ex. VAT) 1 in stock
IAC Sound Proof Soundproof Booth Room 206x222x260cm LWH
ITEM-31057
This was removed from a university where it was surplus to requirements.
The booth is in good cosmetic condition with marks from use.
It is currently disassembled at our facility in Caerphilly.
Dimensions
External dims H-260cm W-206 D-222cm
Window 69cm x 69cm
Letterbox type hole 20Lx10Hx10d
Door opening W 84cm H 87cm
Internal 182W 193L 200H
£ 1,525.00 (ex. VAT) 1 in stock
DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector
ITEM-25509
This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.
The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching.
There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver.
Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta
The remote control was tested and is in working order.
£ 1,500.00 (ex. VAT) 1 in stock
Marrutt Laboratory Darkroom Two Way Revolving Rotary Door Lab
ITEM-38742
Marrutt Laboratory Darkroom Two Way Revolving Rotary Door
This was removed from a university lab where it was surplus to requirements.
The door is a bit stiff to operate but is in good working order. It is in good cosmetic condition with marks from use.
Inside Dimensions: Wx85cm Dx85cm Hx200cm.
Also included are two rubber non slip mats for entry and exit of the Darkroom Door.
£ 1,370.00 (ex. VAT) 1 in stock
Stratasys Dimension Elite 3D Printer PN - 180-00105 & Accessories
ITEM-31388
This Stratasys Dimension Elite 3D Printer was removed from a university lab where it was surplus to requirements.
The item powers on and runs through calibration upon start up. We were unable to test it further at our facility but we contacted the lab and they said the following;
0.1mm tolerance on prints, some post-print cleaning is necessary. It can be a bit temperamental. The heat heads require cleaning each time the printer is used. it could do with a complete service and replacement heads.
The item is in a good, used cosmetic condition aside from a small scratch on the back.
With it are;
Cartridges (all boxes have remaining percentages written on them) :-
1 x ABS-P430 Model (Olive Green) 4%
1 x Nectarine 4%
2 x Nectarine 10%
1 x White 3%
1 x Yellow 12%
1 x Yellow 98%
1 x Blue 3%
1 x Black 14%
1 x Black 6%
1 x Red (unmarked)
Also included:-
2 x Boxes containing 50 Modelling Bases (PN-340-00200)
2 x Dimension System Software Discs
2 x Spare Bulbs
Tool kit
Wire brush
Anti-Sieze Lubricant
2 x Keys
Ethernet Cable
IEC Lead
5 x Spare Fans
Unit dimensions - L92 W69 H172cm
Storage Compartment - L75.5 W65 H45.5cm
£ 1,300.00 (ex. VAT) 1 in stock
DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector
ITEM-25512
This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.
The unit powers up and the lamp is working but we were unable to connect it to any of our equipment to test it further. It comes with cables and a remote control which is fully working.
Lens - Christie Digital Systems zoom XGA/SXGA 2.2-4.0:1 Minolta
£ 1,215.00 (ex. VAT) 1 in stock
Projet 460 Plus 3D Advanced Printer
ITEM-35306
This Projet 460 Plus 3D Advanced Printer was removed from a university lab where it was surplus to requirements.
The unit powers up and runs through the boot sequence without fault.
It is in good cosmetic condition with minor marks from use.
Internal dimensions are: L111cm x W45cm x H46cm.
£ 1,140.00 (ex. VAT) 1 in stock
IAC Acoustics Audiology / Soundproof Room/Booth 183x162x247cm LWH
ITEM-24032
This IAC Acoustics Audiology / Sound Proof Room 183x162x247cm is being sold on behalf of a client
This unit is still on the client's premises.
It is of steel construction and the room has electrics installed and ventilation. There is a window at the examiner's desk to observe the occupant.
The unit is in very good condition and is fully operational.
This room is available on a strict collection-only basis from York, UK. Any collecting buyer will require appropriate RAMS and insurance.
£ 885.00 (ex. VAT) 1 in stock
Viglen Genie P3 65O PC with BOMEM Software
ITEM-28402
This PC was removed from a BOMEM DA3 Series Spectrophotometer System
Viglen PC w/ Galatic Protection Plug
Genie P3 65O
OS: Windows 95
The PC powers on and is in good cosmetic condition.
There are some surface marks from general use.
The PC automatically logs in.
There is a slight rattling noise coming from the fan.
The bearings may have gone due to the age of the PC. This does not seem to affect the operation and we have deemed that a repair is not required.
Software:
Bomem Grams_32
Version 4.04
Bomem DA Series Acquisition Program
Version 1.4
May 19, 2000
Galatic Protection Plug:
Type Y
25 Pin
£ 800.00 (ex. VAT) 1 in stock
Set of IFF Advanced Stage Rigging Equipment Pantograph TOP 2C
ITEM-25506
These were removed from a university where they were surplus to requirements.
Included are;
4 x TOP 2C
6 x Smaller parts
The units are in reasonably good cosmetic condition but have been used.
£ 615.00 (ex. VAT) 1 in stock
Kramer 16X16 RGBHV & Audio Matrix Model VP-1616
ITEM-24762
Kramer 16X16 RGBHV & Audio Matrix Model VP-1616
This was removed from a university where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly.
The fans are working but it has not been tested further.
NEW ITEM
NEW ITEM
£ 575.00 (ex. VAT) 1 in stock
15 x Extreme Networks LX4 XENPAK Model - 10114 900369-10-02
ITEM-19293
15 x Extreme Networks LX4 XENPAK Model - 10114 Modules
These were removed from a university AV department where they were surplus to requirements.
They are all brand new and sealed in the boxes.
£ 550.00 (ex. VAT) 1 in stock
6 x Calumet Genesis 300B Portable Studio Photography Lights Flash Heads
ITEM-21211
6 x Calumet Genesis 300B Portable Studio Photography Lights
These were removed from a university where they were surplus to requirements.
We have tested all of the lamps and all are working correctly. Four of the lamps have bulbs and two are missing.
The lamps are all in very good condition with minor age and usage marks. All come with shades.
The lamp's dimensions are 33cm (L)x 20cm (W)x 20cm (H). This includes the bracket. Each unit is approximately 2kg in weight.
Also included is a manual.
£ 525.00 (ex. VAT) 7 in stock
Sony HVR-M15AE Digital HD Videocassette Recorder HDV
ITEM-24089
This Sony HVR-M15AE Digital HD Videocassette Recorder was removed from a university AV lab where it was surplus to requirements.
We were unable to power up the unit as it wasn't supplied to us with the DC power supply. The lab did confirm that it was working prior to collection.
It is in good cosmetic condition with some marks from use, including the university security markers.
We have multiples of this unit in stock. They are all in near-identical working and cosmetic condition. You may not receive the one in the photos, but if you would like images of the one you are to receive prior to dispatch, we would be happy to provide this.
£ 500.00 (ex. VAT) 1 in stock
Xerox Phaser 7400 Laser Printer With Ink Cartridges
ITEM-35876
Xerox Phaser 7400 Laser Printer With Ink Cartridges
This was removed from a university lab where it was surplus to requirements.
It powers up and is in good working order.
Includes 4 x ink cartridges:
-1 x Cyan (Imaging unit 108R00647)
-1 x Magenta (Imaging unit 108R00648)
-1 x Yellow (Imaging unit 108R00649)
-1 x Black (Imaging unit 108R00650)
Max prints per minute- 40
Model number- N31201B
Serial number- WNC757283
£ 500.00 (ex. VAT) 1 in stock
Asus Desktop PC with TSI: 'Aerosol Instrument Manager' Software Lab
ITEM-18989
Asus Desktop PC with TSI: 'Aerosol Instrument Manager' Software Lab
This was removed from a university lab where it was surplus to requirements.
It contains the following software;
Microsoft Office XP Professional
Ver 10.0.6626.0
Pylab
Enthought Python Distribution
Ver 2.5.2001
AFPL Ghostscript ver 8.45
Picolog
Pico Technology Software
Ver 5.17.1
MiKTeX
ver 2.4
TSI
Aerosol Instrument Manager Software
Ver 5.2.0
TEI 2.2.0
Thermo Environmental Instruments
Ver 5.1.2600.5512
£ 470.00 (ex. VAT) 1 in stock
Job lot of 12 Dexel Lighting Fluo Soft Studio Stage Lights
ITEM-25502
This Job lot of 12 Dexel Lighting Fluo Soft Studio Stage Lights was removed from a university where it was surplus to requirements.
Included are;
10 x Fluo Soft Studio LFS-2 (5 without bulbs)
2 x Fluo Soft Studio LFS-4 (1 without bulbs)
We were unable to test them at our facility due to the type of plug.
There is a mix of conditions, and also a number of spare hoods, corner mirrors etc.
£ 465.00 (ex. VAT) 1 in stock
OBJET Eden 260 Rapid Prototyping System Polyjet 3D Printer Lab
ITEM-16996
This OBJET Eden 260 Rapid Prototyping System Polyjet 3D Printer was removed from a university workshop where it was surplus to requirements.
The unit powers up but has not been tested further. The PC onboard also powers up be we were unable to access the system because it is password protected and we do not have the password. We checked the hard drive in a different PC and all programme files are present but we cannot access them.
It is in good condition overall but has been used previously. It comes supplied with a manual, keyboard & mouse.
There is a box with some of the printing material with it, and a pack of spare blades.
£ 440.00 (ex. VAT) 1 in stock
10 x Marantz PMD661 Professional Solid State Media Recorders
ITEM-28213
10 x Marantz PMD661 Professional Solid State Recorders
These were removed from a university lab where they were surplus to requirements.
All 10 Recorders power on and come with a power supply for each. There are no SD cards fitted.
All are in a reasonable, used cosmetic condition
Items 1 to 20 of 62