Engineering
Items 1 to 20 of 208
£ 36,285.00 (ex. VAT) 1 in stock
International Metrology Systems MS Impact Coordinate Measuring Machine Lab
ITEM-23978
International Metrology Systems MS Impact Coordinate Measuring Machine
This was removed from a university lab where it was surplus to requirements.
We were unable to test it at our facility but the lab confirmed that it was working prior to removal.
It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.
£ 30,000.00 (ex. VAT) 1 in stock
Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle
ITEM-31707
This Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle is being sold on behalf of a client. It is surplus to requirements.
The unit is in excellent cosmetic condition and has only seen <50h of use.
Technical information about the Knapp Open Shuttle OS100B:
- Speed: Up to 1.6 m/s (safe)
- Max. Acceleration: 1,0m/s²
- Minimum turn radius: 360° turn at standstill
- Delivery: both front and rear possible
- Container dimensions: Up to 800 mm x 600 mm
- Optional integrated lift (550 mm to 1,500 mm)
- Maximum load: 100 kg
- Battery life: Over 6 hours, continuous operation
- Charging time: Approximately 60 minutes (charge ratio > 1:6)
- Conveyor top edge: 500 mm to 1,000 mm
- Protection class: IP20
- Battery: LiFePo4 (lithium iron phosphate)
- Communication method: WLAN (b/g/n standard) in 5GHz range
- Dead weight: 130kg
Collection only from Hanau, Germany.
£ 13,000.00 (ex. VAT) 1 in stock
EMCO Concept Mill 105 CNC Machine with Software & Accessories
ITEM-29854
EMCO Concept Mill 105 CNC Machine
This was removed from a university workshop where it was surplus to requirements.
The unit is fully operational but has not been used for about 18 months. It would likely benefit from a service before use.
It is in very good cosmetic condition with marks from use.
Internal dimensions are: L 89cm x W 56cm x H40cm. Bed dimensions are: L 42cm x W 18.5cm.
Included with ti are;
Enterprise Edition, OS build 19045.3324.
1 x IIyama Prolite B2274HDS Monitor.
1 x Heidenhain TNC426/430 Control board.
1 x EMCO WinNC TNC 426 Conversational Software Description Software version since 1.3 Manual.
1 x Software Description EMCO WinNC Heidenhain TNC 426 Conversational Edition C2044-05 Manual.
1 x Electrical Documentation EMCO Concept Mill 105 version F1G V03 Manual.
1 x Heidenhain TNC 426 Concept Mill 155 Manual.
1 x EMCO Concept Mill 105 PC-controlled milling machine for training Manual.
1 x EMCO Collet set Part No. 152700. (not complete)
2 x EMCO Software: MSD-USB 105 USB Version 1.00.
3 x Indexa-Seiki ER-16 Collet Set 10 PCE - 0.5-10.0mm. (not complete)
Various other Milling parts & accessories.
£ 9,000.00 (ex. VAT) 1 in stock
Chroma 8 Channel Battery Cell Programmable Charge / Discharge Tester 17208M Lab
ITEM-18222
This Chroma 8 Channel Battery Cell Programmable Charge/Discharge Tester Model 17208M is being sold on behalf of a client. It is surplus to requirements. It is not currently at our site, but viewings can be arranged.
The unit is in good cosmetic condition and has been stored in the original box for the last year. It was working before it was put into storage.
Some info on the unit;
Chroma’s 17208M is a standalone 8 channel version of their 17011 series high precision charge/discharge tester specifically designed for Lithium-ion batteries, electrical double layer capacitors (EDLC), and lithium-ion capacitors (LIC).
The 17208M comes as a fully integrated system which includes allowing full configuration with reporting and statistics capability.
The new Chroma 17208M-6-30 is a high accuracy (±0.02% of F.S.) programmable charge and discharge tester (6V/30A 8 channels) built with 4 current ranges. It is the best test solution for energy storage products such as battery cells, super capacitors, and lithium ion capacitors.
£ 9,000.00 (ex. VAT) 1 in stock
Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400
ITEM-37041
Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been connected to the pump. It is in good working order.
It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this.
Model Type - 95.C/800.400
SN - 495.MSC.1956
Metaserv Spindle Speed 3600 rpm
Disc size - 250 x 1.5 x 32mm
Disc Size: 250mm
Arbor Size: 32mm
Wheel RPM: 2830 RPM
Vice cutting capacity: 80mm - 75mm diameter
Safety features: Emergency stop, safety switch, electronic break
Coolant connection size: 12.5mm
Drain size: 32MM ID 34MM OD
Coolant tank size: 23 Litre
Power: 3 PHASE - No neutral
Dimensions: : 800 x 550 x 450 mm
Tank Container dimensions - L50 W36 H29cm
The lid with the pump doesn't fit the tank.
£ 5,570.00 (ex. VAT) 1 in stock
Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel Lab
ITEM-23928
Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel
This was removed from a university engineering department where it was surplus to requirements.
The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling.
It is in five sections:
Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor.
Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters.
Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm.
Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal.
Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.
£ 4,780.00 (ex. VAT) 1 in stock
Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller Lab
ITEM-35544
Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller
This was removed from a university lab where it was surplus to requirements.
Everything powers up but has not been tested further.
The PC contains quite a lot of software.
The programs that are relevant to the system are:
MicroWriter ML Version 2.11.11.0.
Thorlabs apt configuration utility v2.2.5389 14611.
MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system
The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.
£ 4,530.00 (ex. VAT) 1 in stock
TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab
ITEM-36247
TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab
This was removed from a university lab where it was surplus to requirements.
The cabinet contains the following items.
Aerotech A3200 Ndrive CP x 5
Serial#1:577057/7
Serial#2:577057/6
Serial#3:681834/7
Serial#4:681834/8
Serial#5:681834/2
All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.
National Instruments Signal Conditioning Connector Block x 2
Model: SC-2345
Both have stickers on the front of the items
Sicker on item 1: pH Sensor
Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays
There are other small electrical switches and controllers inside.
£ 4,430.00 (ex. VAT) 1 in stock
Zwick Roell Z2.5 Material Testing Machine with T22 Temperature Chamber Lab
ITEM-36847
This was removed from a university lab where it was surplus to requirements.
The system powers up and is in good working order.
Included are;
Zwick Roell Z2.5
Type - BTC-FR2.5TN.D09
SN - 165253/2005
Zwick Roell Temperature Chamber
Model - T22
Device no. 077/03
Dimensions - L73 W50 H63cm
Internal - L28 W25 H35cm
Weight - 50KG
2 x Univer Foot Pedals
Model - AM-5004
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 3,915.00 (ex. VAT) 1 in stock
Schaffner Fast Transient Burst Generator NSG 3025 & CD 126 Coupling Clamp Faulty
ITEM-21124
Schaffner Fast Transient Burst Generator NSG 3025 & CD 126 Coupling Clamp
These were removed from a university where they were surplus to requirements.
The units are in good cosmetic condition with minor marks from use.
Schaffner Fast Transient Burst Generator NSG 3025 powers up but the screen was dark and blinking. We could also hear a clicking noise from inside. It was not tested further.
The Schaffner CD 126 Coupling Clamp was not tested.
The system is sold for spares/repairs.
£ 3,885.00 (ex. VAT) 1 in stock
Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules Lab
ITEM-28395
This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.
£ 3,725.00 (ex. VAT) 1 in stock
Genuine General Electric CF6-6 Jet Engine From DC10 Aircraft
ITEM-12357
This jet engine is being sold on behalf of a leading UK universities engineering and aerospace department.
The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft.
In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft.
Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students.
This is a genuine full size jet engine.
Its an extremely rare opportunity to acquire a unit like this.
General Electric Model: CF6-6D1A Jet Engine
Removed from retired DC10-10 Aircraft
Has flown about 40 million miles in its 20-year working life.
Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts.
There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage.
It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.
£ 3,330.00 (ex. VAT) 1 in stock
Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve
ITEM-38693
Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve
This was removed from a university lab where it was surplus to requirements.
It is in a good clean used condition.
Item is supplied with:
1 x Armaturen ARI DP32 Valve.
1 x Lightnin Model: ECI-M51- 150. Serial No. 2747863.
1 x Pump TEC Electric Motor Model: MS2100l-6. Serial No. 1107-004 1949.
1 x Alfa Laval Model: Unique SSV PN10. Serial No. 21127802513. Year 2011.
1 x Flux F424 Seal-less Barrel Pump.
Various ARI Valves & assorted Pipework.
It has not been tested in any way by us.
Serial No: LUB13074-7.
Build date: 2012.
Volume: 360 Ltr.
Construction Category: G.E.P. Tested March 2012.
Material: 304 Stainless steel.
£ 3,300.00 (ex. VAT) 1 in stock
Graphtec FC2250 Series Cutting Plotter Pro CAD/CAM with Accessories Lab
ITEM-27565
This Graphtec FC2250 Series Cutting Plotter Pro was removed from a university lab where it was surplus to requirements.
The university confirmed that the machine is designed to cut card/paper profiles from CAD files. It sits on castors and measures 1000mm x 1200 x 760mm high. It's only around 4 years old and has had limited use.
The item powers on and appears to be in working order, the pump runs with suction and the start-up test ran ok. The item is also in good, used cosmetic condition.
Board size - 83 X 95.5cm
Box of small accessories including:-
Graphtec Type CB15U-K30-5 - Qty - 4
Graphtec Type CB15U-K30-5 - Qty - 2
Graphtec Oil Based Ballpoint pen - Qty - 8
2 x USB Cables
2 x Tools
4 x Unknown Red Plastic Parts
4 x Unknown Metal Parts
3 x Metal fittings
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 3,290.00 (ex. VAT) 1 in stock
85 x TTI TG550 5MHz Advanced Analog Function/Sweep Generators Lab
ITEM-34644
85 x TTI TG550 5MHz Advanced Analog Function/Sweep Generators
This job lot of items comes from a university lab, The items were no longer required.
None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
£ 3,275.00 (ex. VAT) 1 in stock
Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4
ITEM-21203
Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4
This unit came from an engineering university. It was used to develop and test for the motor industry. We were assured it was in good working order.
The Flange/Working Section External Dimension 56cm X 56cm
Included is a basic working section with two access panels. Approximate size of working section
56cm x 56cm X 100cm.
The Fan type is a K. Blackman 28 series.
The fan uses 7.5 kw Electric Motor with an inverter control.
It is split into 4 sections;
Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kg
Unit 2- Joint Section- 68cmx62cmx86cm.- 24 kg
Unit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kg
Unit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg.
Please enquire if you would like a delivery quote.
The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).
£ 3,130.00 (ex. VAT) 1 in stock
Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A Lab
ITEM-19267
This Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in reasonably good cosmetic condition but has some marks from use.
£ 3,000.00 (ex. VAT) 1 in stock
Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure
ITEM-35686
Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. The lab confirmed it was working prior to removal.
£ 2,785.00 (ex. VAT) 1 in stock
CIF Technodrill 2 CNC Drilling & Milling Prototype Machine Lab
ITEM-23982
This CIF Technodrill 2 CNC Drilling & Milling Prototype Machine was removed from a university engineering department where it was surplus to requirements.
The item is in very good cosmetic condition. The lab said the machine is old technology but they believe it has never been used, having been purchased for an abandoned project some time ago.
It powers up and is in working order.
It can be used for small-scale milling work, in particular, milling printed circuit board designs onto copper-clad FR4 board. It comes complete with a wheeled enclosure made from Aluminium T-slot/acrylic.
The item comes with Galaad 3 user manual, and Galaad 3 CAD-CAM-CNC software for windows as well as some unopened accessories.
Item is wired with EU plugs. An adaptor is needed.
£ POA 1 in stock
Bridgeport JB12568 Milling Machine
ITEM-24215
This item is new in stock. Please enquire for further details.
Items 1 to 20 of 208