All Products

£ 3,500.00 (ex. VAT) 1 in stock

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

ITEM-41444

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order.

We are unable to test the top-mounted lamp as the required power supply is not included.

Includes with the microscope are the following:

Leica MPS 60 Camera
Leica ∞/0.17 C Plan 100x/1.25 Oil Objective
Leica ∞/-/A N Plan 5x/0.12 Objective
504058 Leica Illuminator
Leica 807-072.057 Lamp Module (damaged)
Box of misc tools and accessories

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Molecular Devices ImageXpress Micro, Transmitted Light, High Content Imaging

ITEM-20653

This Molecular Devices ImageXpress Micro System was removed from a university lab where it was surplus to requirements.

1 x Molecular Devices ImageXpress Micro.

The unit is fitted with the Transmitted Light Option.

It also comes with the ImageXpress Micro Options controller (Environmental Controller).

And the dedicated power supply.

1 x Sutter Instruments Xeon Lamp unit with liquid light guide.

Also comes with manual and a spare used/unknown bulb.

Unit comes with the following objectives in a Black Peli case.

1 x Nikon Plan UW

1X/0.04

∞/- WD 3.2

1 x Nikon Plan Fluor

10X/0.30

DIC L/N1

∞/0.17 WD 16

1 x Nikon S Plan Fluor

WLWD 20X/0.45

Ph1 ADM

1 x Nikon Plan Fluor

10X/0.30

Ph1 DL

∞/1.2 WD 15.2

1 x Nikon S Fluor

4X/0.20

∞/- WD. 15.5

1 x Nikon Plan Apo

2X/0.10

∞/- WD 8.5

Also included in the system:

2 x PC's with monitors:

1 (Dell) is the original unit that no longer contains any relevant software.

The other (Stone) was originally being used with the system but without a monitor.

It contains the ImageXpress software (3.1.0.97) that controls the Micro unit.

1 monitor appears to be faulty, the other works fine.

1 x Molecular Devices software box that contain various software and a pair of dongles for the PC.

1 x Black Peli Case that houses the objectives, test slide etc.

1 x Box containing all the connector cables.

2 x Pieces of ducting for the environmental control and the exit of the Xeon lamp.

The system has been fully checked by a Molecular Devices engineer. It was reported as being in good working order.

The MetaXpress PC is was used by the engineer to perform the checks on the system.

We are able to supply the full engineer report on the ImageXpress Micro unit.

It might also be possible for us to offer a full installation package, training and other services with the system (for an additional charge). Please enquire for more details.

£ 3,500.00 (ex. VAT) 1 in stock

Perkin Elmer GC Gas Chromatograph Clarus 480 Lab

ITEM-46775

PerkinElmer Clarus 480 GC Gas Chromatograph

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further. The unit is in reasonably good cosmetic condition.

Includes:

Main Clarus 480 unit only (no additional accessories or software included)

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab

ITEM-37999

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. it has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

2 x Shelves: 47 x 45 cm

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

ITEM-37997

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included). It has been fully CO2 and temperature tested.

It is in excellent condition internally and externally.

This item features the following:

4 x shelves: 47 x 45

1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

£ 3,500.00 (ex. VAT) 1 in stock

Haier ULT FREEZER -86ºc Model DW-86L828J Lab

ITEM-46086

Haier ULT FREEZER -86ºc DW-86L828J Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 3,500.00 (ex. VAT) 1 in stock

Nikon Eclipse TI-S Microscope w/ Q Imaging QI Camera & TE-PSE30 Power Supply Lab

ITEM-45446

Nikon Eclipse TE300 Inverted Fluorescence Microscope

This item was removed from a university where it was surplus to requirements.

The microscope powers on and produced a clear slide image when tested with an in-house objective (not included).

It is in good cosmetic condition, however, the protective visor has snapped off. This does not affect its functionality.

Included:

Nikon Power Supply (Model: TE-PSE30, S/N: 4010214)
Q Imaging QI Click Camera (Model: 01-QIClick-F-M-12, S/N: Q28643)
2 x CFI 10X/22 Eyepieces

Specifications:

Model: TE300
S/N: 533589

£ 3,500.00 (ex. VAT) 1 in stock

Zeiss Axioplan 2ie MOT Fluorescence Microscope w/ 4 Objectives Lab

ITEM-39934

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab

This item was removed from a university where it was surplus to requirement.

The unit appears to be functioning well and can also be controlled via the free MicroManager software.

It is in good cosmetic condition.

It does feature the following:

2x Eyepieces PL 10 x 25

P/N: 44 40 34

2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17

P/N: 44 03 51

P/N 44 03 50

1x Zeiss FLUAR 100x/1.30 oil ∞/0.17

P/N: 44 02 85

1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17

P/N: 44 04 60

1x Carl Zeiss HAL 100 12v 100w lamp house

P/N: 1039-685

1x Zeiss Reflector Turret with 6 filters

1x FITC

1x TRITC

1x YFP

1x CFP

1x Cy5

1x DAPI

£ 3,500.00 (ex. VAT) 1 in stock

Perkin Elmer Janus Automated Workstation With Accessories Lab

ITEM-44645

Perkin Elmer Janus Automated Workstation With Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

WinPrep software is available for setup with a PC upon customer request.

Also included:

1 x Perkin Elmer Peri Pump

1 x Perkin Elmer Vaspian Arm

2 x Waste Bottles

£ 3,500.00 (ex. VAT) 1 in stock

Huber CC 415 Refrigerated Heating Bath Circulator Lab

ITEM-44614

Huber CC 415 Circulating Chiller Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

£ 3,500.00 (ex. VAT) 1 in stock

Edwards Model iQDP80 Dry Vacuum Pump Lab

ITEM-38003

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Tactrol 2 PS/QCS/EH150 Laboratory Autoclave Lab

ITEM-25467

This Priorclave Tactrol 2 Autoclave Type - PS/QCS/EH150 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with marks from use.

£ 3,500.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 4330 Refrigerated Incubator Shaker Lab

ITEM-39182

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order.

It is in reasonably good cosmetic condition, with signs of use.

Internal Dimensions: 87 x 56 x 34 cm

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

ITEM-37998

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

Also includes the following:

1 x Shelf: 47 x 45 cm

£ 3,500.00 (ex. VAT) 1 in stock

Peqlab PeqSTAR 96X (Standard) Thermal Cycler Lab

ITEM-36305

Peqlab PeqSTAR 96X (Standard) Thermal Cycler

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

Atlas Copco GA18 Compressor Lab

ITEM-34938

Atlas Copco GA18 Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab said it was functional prior to removal

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Model PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35119

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35118

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Shimadzu ICPE-9000 Plasma Spectrometer w/ ASC-6100 System Spares/Repair Lab

ITEM-42401

Shimadzu ICPE-9000 Plasma Spectrometer with ASC-6100 Autosampler and Additional Equipment

This system was removed from a university lab where it was surplus to requirement.

The Shimadzu ICPE-9000 and ASC-6100 Autosampler are in very good cosmetic condition. The ICPE-9000 did not power on due to previous hard wiring. The autosampler powered on successfully, completing a self-test cycle.

Both Van Der Heijden chillers powered on, displaying ambient temperatures.

The Gast vacuum pump powered on, demonstrating strong vacuum force.

Notes from Previous Owner:

'The Shimadzu ICPE-9000 is not in working order due to a potential issue with the power supply unit. Some components may still function and could be repairable.'

Due to the above-listed comment, this system is listed as Spares/Repair.

Included;

Shimadzu ICPE-9000 Plasma Spectrometer

Cat No.: 211-86000-92
Serial No.: B41844400092X2

Shimadzu ASC-6100 Autosampler

Serial No.: A30324503132 OP

Van Der Heijden Minore Water Chiller

Model: Minore 0-R102
Serial No.: 1685 07
Year: 2007

Van Der Heijden Luftikus Water Chiller

Serial No.: 1182 07

Ulvac Vacuum Pump

Model: GLD-040
Serial No.: 0684468
Year: 2006

Gast Vacuum Pump

Model: DOA-V130-BN
Serial No.: 0004702804

Laboratory Table

Dimensions: 180 x 80 x 75 cm (length x width x height)
Features: Mobile, with four large castors and stabilising feet, extruded aluminium frame, waterproof laminated top

Included Accessories:

4 meters of 9 x 15 mm plastic water hose with an inline solenoid valve
1.5 meters of Tygon R-3603 pipe
4 data cables
4 meters of Parker Parflex 1/4" O.D. high-temperature pipe
1 x 400 ml can of Ambersil Leak Detector spray

£ 3,500.00 (ex. VAT) 1 in stock

Leybold Trivac D40B & RUvac WAU251 Vacuum System Lab

ITEM-34933

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

Type: WAU251
Catalog No.: 11721
Serial No.: B891200093

Leybold TRIVAC:

Type: D40B
Catalog No.: 112 86
Serial No.: A881100069

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Boxer Front Loading Benchtop Autoclave Lab

ITEM-24842

Boxer Front Loading Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order.

It is in reasonable cosmetic condition but has marks from use.

£ 3,500.00 (ex. VAT) 1 in stock

Safelab AirOne Blue AB900GS Recirculating Fume Cabinet Lab

ITEM-46864

Safelab AirOne Blue AB900GS Fume Cupboard Lab

Manufacture Year: 2001

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and full working order. It was regularly serviced until 2024.

It is available for collection from Devon, UK, but we may be able to offer shipping for an additional fee.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Buehler Delta Abrasimet Abrasive Cutter Lab Model No: 10-2155-400

ITEM-34740

Buehler Delta Abrasimet Abrasive Cutter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The workshop has fitted a plug for testing, it will be removed before the sale and will need one fitting or hard wiring on arrival.

Clamp dimensions: 8cm x 4cm.

Disc dimensions: 9.5in/23.5cm.

Disc expiry date: 05/2019.

£ 3,500.00 (ex. VAT) 1 in stock

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

ITEM-45643

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
Two basketball rings with nets
Rear plates for anchoring to the floor

Specifications:

Projection: 325 cm
Required setting length: 425 cm
Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

NEW ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Zeta Programable Guillotine Cutter GCI-800 Lab

ITEM-34773

Zeta Programable Guillotine Cutter GCI-800

This item was removed from a university where it was surplus to requirement.

It is brand new in its original packaging.

The Item powers on and performs as intended.

All items included:

1x Zeta Programable Guillotine Cutter GCI-800

S/N: GC1800-190601

1x Set of Allen keys.

1x Philips screwdriver

1x Lubricating oil.

1x User manual.

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

ITEM-38000

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

3 x Shelves: 47 x 45 cm

1 x Humidity Water Tray: 44 x 25 x 7 cm

£ 3,500.00 (ex. VAT) 1 in stock

BD FACSCanto Flow Cytometer System w/ Fluidics Carts, PC & Software Lab

ITEM-37240

BD FACSCanto Flow Cytometer System with PC, Software, and Accessories

This system was removed from a university laboratory where it was surplus to requirements.

The system includes a BD FACSCanto Flow Cytometer, Fluidics Cart, and a complete PC setup with software and manuals. The system was fully assembled and tested for startup; it communicates well.

It will require installation by a qualified engineer.

Components:

BD FACSCanto Flow Cytometer

Catalog No.: 335860
Serial No.: V0059-Model 1

BD FACSCanto Fluidics Cart

Catalog No.: 335863
Serial No.: N/A
Powers on, with rust on the back.
Included Bottles:
Waste Bottle
DI Water Bottle
BD FACSRinse (REF 340346)
2 x BD FACSClean (REF 340345)

PC & Accessories:

HP Z240 PC: Powers on, software installed.
Sony 23" Monitor: Powers on.
HP Mouse and Keyboard.
Cables: 2 x Ethernet cables, 1 x Comms cable.
Windows 7 has been installed and a new copy of FACSDiva 8.0.2.

Included Software and Manuals:

Dongle
CompuCyte Quantitative Imaging Cytometry Software
BD FACS Academy Introduction to Flow Cytometry CD
2 x BD FACSCanto System Software CDs
BD Cytometer Set Up & Tracking Application Guide
BD FACSDiva Software Quick Start Guide
Getting Started with BD FACSDiva Software Manual
BD FACSCanto Safety & Limitations Manual
BD High Throughput Sampler Safety & Limitations Manual
FACSCalibur Training Manual
BD FACSCanto Workbooks (Yellow Folders)

£ 3,500.00 (ex. VAT) 1 in stock

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System Lab

ITEM-38437

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

HAZMAT-0100045 Calmix Working Solution Bottle

Expires : 11/30/2023

£ 3,500.00 (ex. VAT) 1 in stock

Becton Dickinson BD LSRFortessa Cell Analysis System with Accessories Lab

ITEM-30341

This Becton Dickinson BD LSRFortessa was removed from a university lab where it was surplus to requirements.

The lab informed us it was in full working order prior to removal.

Included are;

1x BD LSRFortessa Model No 649225B1

The unit powers on and is in good cosmetic condition. The fans are working and air can be felt blowing away from the unit.

1x ONEAC Power supply:

Model PCM1500U-CPBB

The unit powers the BD LSRFortessa unit. It is in good cosmetic condition. There are some light tape marks from general use.

1x BD High throughput Sampler:

Cat No. 647701

The unit powers on and is in good cosmetic condition.

1x BD FACSflow Supply System:

Ref, 349227

The unit powers on and is in good cosmetic condition.

1x Nalgene Bottle:

Volume, 2L

The unit is in good cosmetic condition.

1x BD Closed Waste Container:

The unit is in good cosmetic condition.

£ 3,460.00 (ex. VAT) 1 in stock

Syngene G:Box iChemi XR Gel Imaging System Lab

ITEM-39848

Syngene G:Box iChemi XR Gel Imaging System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but the camera has not been tested.

The software is available for free online.

it is in good cosmetic condition with minor marks.

£ 3,450.00 (ex. VAT) 1 in stock

Zeiss Axioskop 2 MAT w/ 4 X Objectives (Plan-NEOFLAUR, Epiplan) & EBQ 100 PSU

ITEM-45077

Zeiss Axioskop 2 System Power Supply

This system was removed from a university lab where it was surplus to requirements.

All included units power on and are in good cosmetic condition.

The previous client has stated this system was in full working order prior to removal.

The system includes the following Zeiss objectives, all of which are producing clear images and are in good condition with no scratches:

Zeiss Plan-NEOFLUAR 20X/0.50 (1004-072)
Zeiss Epiplan 10X/0.20 HD (44 29 34)
Zeiss Plan-NEOFLUAR 40X/0.75 (44 03 50)
Zeiss Epiplan 50X/0.70 HD (44 29 54)

Additional components:

Jena GmbH ebq 100 Isolated Power Supply (Model: ebq 100 isolated-z/101 26f, S/N: M 47415479)
2 x HAL 100 Lamps (1039-685, 44 72 19)
1 x HBO 100 Lamp 1007-980
Imagingsource DFK 41AFO2 Camera
2 x Zeiss W-Pl 10x/23 Eyepieces (45 50 43)

Please note, there is no mercury bulb included.

£ 3,450.00 (ex. VAT) 1 in stock

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System Lab

ITEM-45426

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System

This item was removed from a university where it was surplus to requirements.

The system is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Additionally, the client has reported that all hardware is functioning correctly.

Included Components:

APCI Probe
2 x Bottles
20 x Thermo Corona APCI Needles

Specifications:

Model: Surveyor MSQ
Serial No.: MSQ21121

£ 3,405.00 (ex. VAT) 1 in stock

Corbett Research Rotor-Gene RG-3000 with PC & Software Lab

ITEM-38976

Corbett Research Rotor-Gene RG-3000 with PC & Software

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with the software. It was programmed to run and worked well in testing.

It is supplied with a Windows 7 PC with RotoGene 6.1 installed.

Rotor holds 36 x 0.2ml

Comes with:-

PC Cable

2 x Spare rotor parts

2 x Operators Manuals

Rotor Gene Back Up Floppy Disk

Rotor Gene Data Floppy Disk

The Rotor Gene Set up Files v4.2

Rotor-Gene Software Version 4.6

Rotor-gene 3000 Operating Software V4.6.94

RotorGene 36/72 Maintenance Pack 1.0/1.1

There are 4 more copied discs of the same

£ 3,255.00 (ex. VAT) 1 in stock

Biotage Jones Chromatography Flashmaster II System Lab

ITEM-20480

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it was surplus to requirements.

The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility.

There is some chipped paint along the top of the unit and scuffs and scratches from general use.

£ 3,250.00 (ex. VAT) 1 in stock

Zeiss AxioSkop 2 Microscope w/ 3 x Objectives 20/40/100x Lab

ITEM-46235

Zeiss AxioSkop 2 Microscope w/ 3 x Objectives 20/40/100x Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good used condition.

The microscope has been tested using in-house slides and is in good working order. (test slide not included)

AxioSkop 2 Main Body

Zeiss 45 23 44 Trinocular head with camera port
Zeiss 45 21 87 Filter Cube fitted
Zeiss 45 35 60 Specimen/Object Guide
Zeiss 45 35 50 Rotary Stage
Zeiss 44 54 39 Condenser
Zeiss 44 72 19 HAL 100 Halogen Lamp

Objectives:
AmScope 20/0.40, 160/0.17 (Brand New)
AmScope 40/0.65, 160/0.17 (Brand New)
Zeiss Plan-NEOFLUAR 100x/1.30 Oil, ∞/0.17, 44 04 80

Eyepieces:
2 x Zeiss 45 50 43 W-Pl 10x/23 Eyepieces

£ 3,250.00 (ex. VAT) 1 in stock

Applied Biosystems Hitachi 3130 Genetic Analyzer Lab

ITEM-38566

Applied Biosystems Hitachi 3130 Genetic Analyzer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in good working condition prior to removal, however it does not include a working capillary array (4 channel).

Also includes the following items:

3130 Genetic Analyzer Data Collection Software

3130 Genetic Analyzer Calibration File 627-4161 S/N - 18323-017 (Floppy Disc)

3130 Genetic Analyzer Operator Training - P/N -4365947 (CD)

3130 Genetic Analyzer Documentation - P/N -4362019 (CD)

31XX Family Service Tools - P/N -4361102 (CD)

3130 Genetic Analyzer Data Collection Software v3.0 - P/N -4363485 (CD)

Persistence JNDI-Library - P/N -4347111 (CD)

PowerQuest V2i Protector 2.0 Desktop Edition (CD)

SeqScape Software Version 2.5

ABI Prism SeqScape Software Version 2.x Tutorial (Booklet)

SeqScape Software Version 2.5 User Guide (Booklet)

GeneMapper Software Full Install Version 4.0

GeneMapper Software v4.0 Full Install - P/N -4367070 (CD)

GeneMapper Software v4.0 Documentation - P/N -4366876 (CD)

GeneMapper Software Version 4.0 Installation and Administration Guide (Booklet)

GeneMapper Software Version 4.0 Reference and Troubleshooting Guide (Booklet)

GeneMapper Software Version 4.0 SNaPshot Kit Analysis Getting Started Guide (Booklet)

GeneMapper Software Version 4.0 SNPlex System Analysis Getting Started Guide (Booklet)

GeneMapper Software Version 4.0 Loss of Heterozygosity LOH Analysis Getting Started Guide (Booklet)

AB DNA Sequencing Analysis Software v5.2

AB DNA Sequencing Analysis Software v5.2 - P/N - 4363737 (CD)

AB DNA Sequencing Analysis Software v5.2 Patch 2 - P/N - 4366168 (CD)

SeqScape Analysis Software v2.5 - P/N - 4363736 (CD)

ABI Prism SeqScape Software v2.5 - P/N - 4352544 (CD)

DNA Sequencing Analysis Software Version 5.1 for Windows XP and 2000 Platforms User Guide (Booklet)

BigDye Terminator v3.1 Cycle Sequencing Kit Protocol (Booklet)

2 X 3100 Avant Capillary Array 36 cm Part No. - 4333464

£ 3,250.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AIC-PE Lab

ITEM-41811

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

£ 3,250.00 (ex. VAT) 1 in stock

Thermo Neslab CC-100 II Immersion Cooler With Thermo Electron Cryotrol

ITEM-38436

Thermo Neslab CC-100 II Immersion Cooler With Thermo Electron Cryotrol

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order (digital thermometer used for testing, not included).

It is in good cosmetic condition with minor marks.

£ 3,225.00 (ex. VAT) 1 in stock

GE Healthcare Ready to Process Wave 25 Bioreactor System Lab

ITEM-31528

This Ready to Process Wave 25 Bioreactor System was removed from a university lab where it was surplus to requirements.

None of the items have been tested because the power supply was not included.

The system is in good cosmetic condition with minor marks from use.

Included are;

1x GE Ready to Process CBCU

Code no.28998100

Mfg year 2015

1x GE Ready to Process Pump 25 w/ 2x pump heads

Code No. 29000704

Mfg year 2015

There is some damage to the housing of the unit on the bottom LHS of the unit -as seen in photo.

2x PumpHeads:

114DV OEM Pumpheads

Prod Nos.

113.5000.R33

Ser Nos.

66056-2

66056-3

Mfg 2015

1x Icellis Docking Station

Prod No. 820284

The unit is in good cosmetic condition

The unit has a 32 Oz Nalgene vessel,

1x PALL Life Sciences Icellis Nano lid

Ser No. P004_G_169

1x Hamilton Visiferm DO 120 Sensor:

Part no. 242450

Heat Nos.

•541742

•425755

Ser No. 026570

1x Icellis Perfusion Module w/ 2x pump heads

Prod No. 820288

Pumpheads:

102R Twin Roller low-flow

Prod No. 013.211.000

£ 3,190.00 (ex. VAT) 1 in stock

Statebourne Cryogenics Biosystem BM 24 Automatic Liquid Nitrogen Refrigerator

ITEM-29642

Statebourne Cryogenics Biosystem 24 BM24 Automatic Liquid Nitrogen Refrigerator

This was removed from a university lab where it was surplus to requirements.

The system has had a brand-new power supply fitted and powered up. The water solenoid can be heard running.

It is in good cosmetic condition but has some marks on the front panel.

The keys are included.

£ 3,150.00 (ex. VAT) 1 in stock

Miltenyi Biotec autoMacs Pro Separator & AccessoriesLab

ITEM-44768

Miltenyi Biotec autoMacs Pro Separator

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

Manual
1 x chill 5 tube rack
1 x chill 15 tube rack
Sensor cables
1 x bottle closure washing solution, green
1 x bottle closure running buffer, blue

Specifications:

Model: autoMacs Pro Separator
Serial#: 0631

£ 3,140.00 (ex. VAT) 1 in stock

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System Lab

ITEM-31219

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System

This system was removed from a laboratory where it was surplus to requirements.

Both units power up and are in good cosmetic condition with marks from use.

It comes with 8 x Trays (53.5 x 16cm). One tray has been labelled as 'Not moving'

£ 3,070.00 (ex. VAT) 1 in stock

Terumo TSCD-II Type Model Terumo Sterile Tubing Welder Lab

ITEM-47125

Terumo TSCD-II Type Model Terumo Sterile Tubing Welder Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specifications;

Total Welds - 00003571
Next Service - 17/11/2024

£ 3,060.00 (ex. VAT) 1 in stock

Terumo Model TSCD-II Terumo Sterile Tubing Welder Lab

ITEM-47124

Terumo TSCD-II Type Terumo Sterile Tubing Welder Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specifications;

S/N - 2020-06509
Total Welds: 00002680

£ 3,050.00 (ex. VAT) 1 in stock

Terumo TSCD-II Model Sterile Tubing Welder Lab

ITEM-47122

Terumo TSCD-II Model Sterile Tubing Welder Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specifications;

S/N - 2020-06506
Total Welds - 00002416

£ 3,045.00 (ex. VAT) 1 in stock

Leica Reichert Ultracut S Ultramicrotome and Controller Lab

ITEM-36250

Leica Reichert Ultracut S Ultramicrotome and Controller

This was removed from a university lab where it was surplus to requirements.

The units all power up and the microtome is mechanically sounds, but only the top light is working.

It is in good cosmetic condition with minor marks.

Leica Reichert Ultracut S Ultramicrotome

Model: Ultracut S Ultramicrotome 702501

Serial#: 420626

2x Eyepieces:

Cambridge instruments

Part#: 31-05-62

Leica Reichert AG Control Panel

Model: 654901

Serial#: 89378

£ 3,040.00 (ex. VAT) 1 in stock

Terumo TSCD-II Type Sterile Tubing Welder Terumo Lab

ITEM-47123

Terumo TSCD-II Type Sterile Tubing Welder Terumo Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specifications;

S/N: 2020-06505
Total Welds: 00002696

£ 3,030.00 (ex. VAT) 1 in stock

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

ITEM-47121

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

S/N: 2020-06510

Total Welds: 00002846

£ 3,020.00 (ex. VAT) 1 in stock

Terumo TSCD-II Model Terumo Sterile Tubing Welder Lab

ITEM-47120

Terumo TSCD-II Model Terumo Sterile Tubing Welder Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

S/N: 2020-06510

Total Welds: 00002273

£ 3,015.00 (ex. VAT) 1 in stock

Neslab Cryocool Immersion Cooler CC-100 II Lab

ITEM-35995

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

All Products

Filters