All Products

£ 750.00 (ex. VAT) 1 in stock

Tecan Infinite F200 Fluorescence Microplate Reader With Software Lab

ITEM-42473

Tecan Infinite F200 Fluorescence Microplate Reader With Software Lab

This item was removed from a university lab where it was surplus to requirement.

The microplate reader powered on with green light showing and cooling fans running. No other testing carried out due to no PC to control unit.

It is in very good cosmetic condition.

The previous owner has stated it was in complete working order prior to removal.

Included:

1 x data cable

1 x Tecan Magellan V7.0 software disc

1 x Tecan Infinite F200 User Guide

1 x Tecan Magellan Software Reference Guide

1 x small Tecan hard case containing:

1 x filter holder with one filter No. 30019916 03 1227719

1 x Packet of small plastic filter holder fittings

1 x Rubis K6 tweezer set

1 x Fitting tool

1 x Flat plate

£ 750.00 (ex. VAT) 1 in stock

EG&G Polarographic Analyzer System Model 384B with 303A Dropping Electrode Lab

ITEM-27766

EG&G Polarographic Analyzer System Model 384B with 303A Dropping Electrode

These were removed from a university lab where they were surplus to requirements.

Both units have been powered up but we were unable to test them further at our facility.

Included are;

1x EG&G Polarographic Analyzer

Model 384B

The unit powers on and is in good cosmetic condition. 'BLANK SWV' appeared on the screen after the analyser had powered up. None of the buttons appeared responsive.

1x EG&G Stating Mercury Dropping Electrode (SMDE, DME, HMDE)

Model 303A

The unit powers on and is in good cosmetic condition. We were unable to test it.

Accessories:

1x EG&G Operating Diskette

Revision: F0

The unit is in good cosmetic condition. The diskette goes into the back of the polargraphic analyser in the disk drive. 'BLANK SWV' appeared on the screen after the analyser had powered up.

1x EG&G Polargraphic Analyzer user manual

1x EG&G Stirrer

Model 305

The unit powers on via the SMDE and is in good cosmetic condition.

The stirrer works in MANUAL mode, and both the slow and fast speeds are working. We could not get the stirrer to work in AUTO mode.

2x Ametek Data Disk

Model 394

Rev 2.01

The units are in good cosmetic condition, they are not compatible with the unit. more likely for a PC,

7x 25ml Glass cups

The units are in good cosmetic condition

5x 50ml Glass cups

The units are in good cosmetic condition.

1x Ribbon cables RS232

The unit is in good cosmetic condition

1x Cell compartment controller cable

The unit is in good cosmetic condition,

it provides power from the 384B Analyser to the 303A SMDE

£ 750.00 (ex. VAT) 1 in stock

Applied Biosystems 7500 Fast Real-Time PCR System Lab

ITEM-46339

Agilent Technologies DNA Microarray Scanner G2505 B Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on; however, further testing at our facility was not possible.

The previous owner noted that it was in working order when last used.

£ 750.00 (ex. VAT) 1 in stock

Applied Biosystems 7500 Fast Real-Time PCR System Lab

ITEM-44525

Applied Biosystems 7500 Fast Real-Time PCR System Lab

This system was removed from a university lab, where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Also includes the following:

Real-Time PCR Systems - Chemistry Guide

Applied Biosystems Site Preparation Guide

Applied Biosystems Getting Started Guide

Allelic Discrimination Guide

7500 Fast Real-Time Software V1.4

MicroAmp Adhesive Film

£ 750.00 (ex. VAT) 1 in stock

Porkka Commercial Laboratory Ice Machine Model KF75 Lab

ITEM-24767

This Porkka Commercial Laboratory Ice Machine Model KF75 was removed from a university lab where it was surplus to requirements.

The unit powers up and the lab informed us that it had no known issues.

We have tested it and it is in good working order.

It is in good cosmetic condition with marks from use.

Because it was removed from a laboratory environment this is sold strictly for lab use only.

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab

ITEM-23391

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with marks from use. All modules power up.

We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.

The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.

The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.

We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.

The system is made up of the following;

1 x Matrix Hydra II

Cat no. 109610

1 x Matrix 2 Position Stage

1 x Apogent Discoveries Matix Hydro Pump Module

The unit powers on with all 3 Fills working.

1 x Matrix P1 Control Box

1 x Innovadyne 1-Channel Nanofill

The unit powers up.

1 x Grant Instruments Type MS1

The unit powers up.

Dell Laptop with Microsoft Mouse

Model - PP04X

Hydra II-Plus-One Control Software Version 3.1.3 Installed

The unit powers up and the software runs.

Software Discs:

Matrix Hydra II-Plus-One Control Software Version 3.1.3

Matrix Hydra II-Plus-One Control Software Version 3.1.2

SuperLogics LE Software Suite Rev 2.9

2 x Socket Installation discs

Various tubing and accessories

Operating instructions

£ 750.00 (ex. VAT) 1 in stock

Applied Biosciences 7900HT Fast Real-Time PCR Complete System Lab

ITEM-41491

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

16A 1Phase cable

£ 750.00 (ex. VAT) 1 in stock

Applied Biosystems ABI Prism 7900HT Sequence Detection System Lab Spares/Repairs

ITEM-30573

Applied Biosystems ABI Prism 7900HT

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has the following issues.

The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.

There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues.

It is sold for spares/repairs.

The PC is included.

Dell Optiplex PC

Dell 17" Monitor

Keyboard & Mouse

USB Cable

DVI Cable

All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

£ 750.00 (ex. VAT) 1 in stock

Applied Biosystems 7900HT Fast Real-Time PCR System - PN 4330966 Lab

ITEM-19829

This Applied Biosystems 7900HT Fast Real-Time PCR System was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter BioMek NXp Laboratory Automation System Lab

ITEM-41419

Beckman Coulter BioMek NXp Laboratory Automation System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up.

The system includes the following:

Software
PC and monitor
Manual
40 x boxes of 10 racks of P20 pipette tips
8 boxes of 10 racks of P250 pipette tips
1 x Biomek valve Unit
1 x Inheco TEC Control 96/RS232
1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs)
1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs)
Box of tubing
Box of spare parts and accessories
1 x light curtain test rod

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31840 Lab

ITEM-20385

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

Everything powers up and the system is in good cosmetic condition with some marks from use.

There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code

'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)

We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.

This error makes it impossible to home the system. So it could not be tested any further.

The system comprises of;

1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation

Cat no. A31840

Unit dimensions - W77 L92 H98cm

1 x IBM ThinkCentre PC

MT-M 8113-DA1

Biomek Software Version 3.3 installed.

1 x Lenovo Monitor

Type - 9227-AC1

1 x Lenovo Keyboard

1 x IBM Mouse

2 x Nalgene 2 Gallon Waste/Supply Bottles

Box of Accessories:-

Beckman Coulter AccuFrame

Beckman Coulter Vacuum Valve Unit

Power Adaptor

Various cables

8 x 2ml Tube holders (24 tube slots in each)

94 x 2ml tubes

Vacuum Manifold Base

23mm Spacer Collar PN 719751

36mm Collar

3 x Thermo Scientific 96 well 0.2ml plates.

£ 745.00 (ex. VAT) 1 in stock

Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 & Welded Air Receiver

ITEM-19840

This Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 was removed from a university lab where it was surplus to requirements.

The unit powers up and builds pressure but has not been tested further. It works well.

It is in good cosmetic condition with minor marks.

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Carl Zeiss Axiovert 35M Inverted Microscope (No Stage or PSU)

ITEM-39817

Carl Zeiss Axiovert 35M Inverted Microscope

This was removed from a university lab where it was surplus to requirements.

The unit was tested with a PSU from another unit. It powers up and the lamps work. We build a makeshift stage and the objectives are clear and in good working order.

The microscope has no stage.

It is in good cosmetic condiiton with minor marks.

Includes the following:

PL 10x/20 Eyepiece x 2

Objectives:

Zeiss Plan-Neflaur 2,5x/0,75

Zeiss Achrostigmat 5x/0,12 -/∞

Zeiss Achrostigmat 10x/0,25

Zeiss Achrostigmat 20x/0,30 Ph1

Zeiss Achrostigmat 20x/0,40 Ph1

£ 740.00 (ex. VAT) 1 in stock

Thermo Spectronic vis Spectrometer Model Genesys 10 Lab

ITEM-29807

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it was surplus to requirements.

This item powers on and is in good cosmetic condition, it has not been tested further.

Lamp hours: 1152.73

£ 740.00 (ex. VAT) 1 in stock

Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid

ITEM-37954

This Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used.

1200 rpm max

6 x position 500ml capacity

Compatible with Thermo Scientific Sorvall Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

£ 730.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

£ 730.00 (ex. VAT) 1 in stock

UVP Visi-Blue Transilluminator Type VB-26 Lab

ITEM-37342

UVP Visi-Blue Transilluminator Model Type VB-26 Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Specifications;

Model: VB-26
S/N: J116764

£ 725.00 (ex. VAT) 1 in stock

Murex Transtig AC/DC 355 Square Wave Welder

ITEM-30285

Murex Transtig AC/DC 355 Square Wave Welder

This was removed from a university where it was surplus to requirements.

We were unable to test the unit as it requires 3 Pin 660 Volts/60 Amps, which we do not have at our facility.

It is sold as untested.

£ 725.00 (ex. VAT) 1 in stock

Reichert-Jung Ultracut E Microtome 70 17 74 Lab

ITEM-35673

Leica Reichert Ultracut E Microtome

This was removed from a university lab where it was surplus to requirements.

The unit was tested with a controller from another unit (not included), but was found to power up and operate correctly.

It is in good cosmetic condition with minor marks

Head - Reichert Stereo Star Zoom

0.7X to 3.0X 569

2 x Eye pieces - 15X W.F 184

£ 720.00 (ex. VAT) 1 in stock

Pall Corporation Sentino Microbiology Pump Model: 89732 rev E & Funnels Lab

ITEM-36169

Pall Corporation Sentino Microbiology Pump & 30 x MicroFunnel Filter Funnels

This was removed from a university lab where it was surplus to requirements.

Included are;

Pall Corporation Sentino Microbiology pump

Model: 89732 rev E

Serial#: 01179

The item is in good cosmetic condition. No tubing is with it. The item powers on with buttons and indication lights in full working order. When powered on and tested, the motor runs smoothly with no issues.

Pall Corporation 30 MicroFunnel Filter Funnels

Model: MicroFunnel 300 Plus with sUPOR 0.4 µm, White, Gridded

Ref: 4815

Lot: FL3059

One box is brand new with 20pcs other box has been opened and contains 10pcs.

SPARES/REPAIR ITEM

£ 720.00 (ex. VAT) 1 in stock

Edwards FTM5 Film Thickness Monitor Lab Spares/Repairs

ITEM-34643

Edwards FTM5 Film Thickness Monitor

This was removed from a university lab were it was surplus to requirements.

The unit did not power up in testing.

It is in good cosmetic condition with minor marks.

£ 720.00 (ex. VAT) 1 in stock

Jobin Yvon Spex Spectrum One Liquid Nitrogen Detector Head

ITEM-35552

Jobin Yvon Spex Spectrum One Liquid Nitrogen Detector Head

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use.

£ 720.00 (ex. VAT) 1 in stock

Vacuubrand MZ 2CE Membrane Diaphram Vacuum Pump Lab

ITEM-34893

This Vacuubrand MZ 2CE Membrane Diaphram Vacuum Pump was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

£ 720.00 (ex. VAT) 1 in stock

UVP Visi-Blue Transilluminator Model VB-26 Lab

ITEM-37341

UVP Visi-Blue Transilluminator Model Type VB-26 Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Specifications;

Model: VB-26
S/N: J116754

£ 720.00 (ex. VAT) 1 in stock

Sony 3CCD Colour Video Camera DXC-390P and Adaptor CMA-D2CE

ITEM-24241

Sony 3CCD Colour Video Camera DXC-390P and Adaptor CMA-D2CE

This was removed from a university lab where it was surplus to requirements.

All modules power up but have not been tested further.

Everything is in good cosmetic condition with minor marks.

Camera:

Model DCX-390P

Serial No. 401881

3-CCD 1/3" format, 800 tv lines S/N 63, RGB C-mount camera

Adaptor:

Model CMA-D2CE

Serial No. 27147

Included with the camera and adaptor are a power lead, a dc power lead and data lead between the two units.

£ 715.00 (ex. VAT) 1 in stock

Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar Lab

ITEM-17266

This Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but as it is a used item it will have some scrapes and marks from use.

It comes with a set of 6 storage racks and a trolley.

It has not been tested.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

£ 710.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video Camera Camcorder Kit With Shoulder Rig

ITEM-41744

Canon XF305 HD PAL Video Camera Camcorder Kit With Shoulder Rig

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in full working order.

Also included are the following:

1 x Charger Power Adapter

No. BAC

1 x Battery Pack BP-975 Serial No. 201106 C

1 x shoulder rig, fully adjustable, unknown manufacturer

1 x Shoulder soft carry bag

1 x Power lead

1 x Data transfer cable

1 x Lens cap

£ 710.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod

ITEM-41742

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client.

Also included are the following:

1 x Charger Power Adapter CA-930 No. CAG

1 x Manfrotto 520MVB tripod and head No. 520MVB/KJ05

1 x Shoulder soft carry bag for the camera

1 x Shoulder soft carry bag for tripod

1 x Power lead

1 x Data transfer cable

1 x Lens cap

£ 710.00 (ex. VAT) 1 in stock

Torrey Pines Scientific Inc Echotherm Chilling/heating Plate IC22-2

ITEM-38440

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in good cosmetic condition.

£ 710.00 (ex. VAT) 1 in stock

UVP Visi-Blue Transilluminator Model Type VB-26 Lab

ITEM-37340

UVP Visi-Blue Transilluminator Model Type VB-26 Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Specifications;

Model: VB-26
S/N: J11544

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet 83545 Touch Display Coffee Machine

ITEM-44402

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

Specification:

Model- Gourmet
Machine number- 83545
S/N- 60014387

£ 700.00 (ex. VAT) 1 in stock

Denford Microrouter V5 Pro CAM CNC System with Software

ITEM-44931

Denford Microrouter V5 Pro

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The vacuum pump is functional. However, we are unable to conduct further testing at our facility.

Included:

Denford Update Disc
Denford Disc
Denford QuickCam Pro CAM Software
Denford VR CNC Milling Software
Denford CNC Projects Suite Milling
Denford QuickCam 4D Milling CAM Software
User's Manual
Denford CAD/CAM Design Challenge

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44404

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years and it would require servicing before use.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44403

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44400

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. it will likely need a service before it can be used again.

Key not included.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Packard Tri-Carb 2100TR Liquid Scintillation Analyser (No Source) Lab

ITEM-42467

Packard Tri-Carb 2100TR Liquid Scintillation Analyser, ViewSonic Monitor, Epson LQ-350 Printer, and IBM Keyboard

This system was removed from a university lab where it was surplus to requirement.

The radioactive source from the Tri-Carb 2100TR was removed before it left its previous workplace.

The previous owner stated it was in working order prior to removal, however the Tri-Carb 2100TR could not be fully tested due to internal issues, including loose components and disconnected electrical cables found after removing the front panel.

Due to this, it will require recommission and is therefore listed as Spares/Repair, though it was confirmed as working before the source was removed.

Included Equipment:

Packard Tri-Carb 2100TR Liquid Scintillation AnalyserModel: A2100
Serial No.: 406445

Serial No.: RQK111800366
Year: 2011

Epson LQ-350 PrinterModel: PA81A
Serial No.: R9By022952

IBM KeyboardModel: RT3100 V:5NTWUK
Serial No.: 82490922

Included Accessories:

69 x sample holder racks with 18 small sample positions.
31 x sample holder racks with 12 large sample positions.
41 x Protocol Plugs Part No. 7000675.
2 x packets of rack labels.

Manuals:

1 x Tri-Carb Models 2100TR/2300TR Operation Manual.
1 x Tri-Carb 2000 Series Operation Manual.
1 x Epson LQ-300+II Printer Setup Guide.
1 x set of Tri-Carb Performance Certificates.
1 x DOS 3.30 User Guide.
1 x DOS 3.30 Reference (Abridged) User Guide.

Software:

1 x IBM DOS 3.30 on 3.5" and 5.25" diskettes (may be incomplete).
1 x set of 9 Tri-Carb A2100TR 3.5" Install Discs.
1 x Epson LQ-300+II Software CD-ROM Disc vol 2.1.

£ 700.00 (ex. VAT) 1 in stock

Ingeny PhorLI IPU-S Vertical Electrophoresis System

ITEM-37755

INGENYphorU IPU-S Vertical Electrophoresis System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

The unit is watertight and the valve is working.

Also included:

FisherBrand HU13

FisherBrand HU6

INGENY phorLI

Deca Probe Series

Invitrogen Novex Mini-Cell

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System CP830, XS-2000 Lab

ITEM-42071

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System

This system was removed from a university lab where it was surplus to requirements.

The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear.

The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed.

Due to the main unit not powering on, this system is listed as Spares/Repair.

Specifications:

Main Unit
Model: CP830
Serial No.: 1831322-240105A
Cryogenic Crystal Cooler
Model: XS-2000
Serial No.: 800150

£ 700.00 (ex. VAT) 1 in stock

Ophir Orion-PD-ROHS Laser Power Meter Lab

ITEM-44663

Ophir Orion Laser Power Meter

This item was removed from a university laboratory where it was surplus to requirements.

The laser power meter is in good cosmetic condition but does not power on unless connected to a power supply unit (PSU). It functions properly when powered via a PSU; however, the battery needs replacing.

A modified PSU has been included to accommodate this.

Includes:

Testing Head
Threaded Mount Plate
Key
Original Hard Case
Power Supply Cable

£ 700.00 (ex. VAT) 1 in stock

Edwards Freeze Dryer Modulyo Lab

ITEM-39926

This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirements.

The item powers on and is in reasonably poor cosmetic condition, unable to test it further at our facility.

It cools down but has not been tested under a vacuum.

£ 700.00 (ex. VAT) 1 in stock

Mitsubishi Freqrol - A500 Inverter Lab

ITEM-31520

Mitsubishi Freqrol - A500 Inverter Lab

Model: FR-A520-3. 7K

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

We are unable to test this item as it requires a connection to a larger system.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

ITEM-36238

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

This was removed from a university marine department. It was surplus to requirements.

Included are;

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine with Gearbox

Model: E40DPLIIS

Serial#: 05306542

The item appears to be in reasonably good condition.

It is missing the propeller and is possibly missing additional elements but we are unable to confirm.

The engine Cowl & Lower Engine Side Covers are Included but not assembled to the engine.

Evinrude E-Tec 40 Engine Cowl

Part#: 353643

Item is in good used cosmetic condition.

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Left

Part1#: 350 499

Part2#: 350 809

Part3#: 350 603

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Right

Part1#: 350 498

Part2#: 350 652

Part3#: 350 8608

Item is in good used cosmetic condition.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Applied Biosystems Mariner Biospectrometry Spectrometer Workstation Mass Spec

ITEM-19492

This Applied Biosystems Mariner Biospectrometry Spectrometer Workstation was removed from a university lab where it was surplus to requirements.

All the parts are in good cosmetic condition but do have various marks and signs of general use.

The unit powers up but makes a burning smell. It is sold for spares/repairs.

The system consists of:

1 x Applied Biosystems Mariner Bispectrometry Spectrometer.

Also comes with various extra parts;

2 x Electrospray units.

1 x Nanospray unit in a box with 2 x Genwac Cameras attached.

1 x 'Electronics box' from old Mariner.

1 x Bag of spare fuses.

1 x Waste Bottle.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab

ITEM-37161

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab

This system was removed from a university where it was surplus to requirements.

Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair.

Includes the following;

1x Autoclave Engineers unit

Model: E010HM0210C112B200121E2101

1x Control tower

Model: C1211224300010C

£ 700.00 (ex. VAT) 1 in stock

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

ITEM-38019

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

Shoulder Plate Kit

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it further at our facility.

The kit includes the following:

1 x monitor arm

1 x tripod mount

1 x 80mm lens adaptor

1 x 95mm lens adaptor

1 x follow focus handle

1 x hard carry case

1 x 40cm steer whip

1 x 50cm steer whip

1 x top hand grip

1 x 0.5M pitch gear

1 x 0.6M pitch gear

1 x lens supporter

2 x allen keys

2 x 10cm rods

1 x nun's knickers

All Products

Filters