All Products

£ 500.00 (ex. VAT) 1 in stock

Parr Isoperibol Calorimeter 1261EA w/ Power Supply & Printer Lab Spares/Repairs

ITEM-24968

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition but has plenty of marks from use and age.

The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system.

The system was serviced in 2020 not long before it came to us.

We were unable to test it further.

Also included are the following:

1x Parr 1755 Printer

1x Parr/Star Power Supply

Model: AD8340

£ 500.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

£ 500.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab

ITEM-25464

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.

There are 6 Racks inside with drawers that hold 5ml tubes.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Packard 9200 Hydrogen Generator B920000 Lab Spares/Repairs

ITEM-28161

Packard 9200 Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen.

It is in reasonably good cosmetic condition, but has some marks from use.

it is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 Lab

ITEM-28195

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 was removed from a university lab where it was surplus to requirements.

The item powers on with blowers and both Light & UV working.

The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height.

The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway.

The lab reported that the filter has been removed.

Inside dimensions - D57.5 W118 H72cm

£ 500.00 (ex. VAT) 1 in stock

PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab

ITEM-28205

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the heating is in good working order.

Inside tank dimensions - L59 W31 H37cm

It is in good cosmetic condition with some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs

ITEM-29745

Beckman Coulter Avanti J-E Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.

It is in good cosmeti condition with minor marks.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System Spares/Repairs

ITEM-30328

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.

The microscope focus motor/Z-Drive has been removed from this unit.

We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs.

Included in the system are;

1x GE IN Cell Analyzer 1000:

Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.

When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.

1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.

1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.

The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.

EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.

We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.

1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.

1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.

Keys:

model No. 901

The units are in good cosmetic condition

2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.

1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.

2x APC rack PDU

The units power on and are in good cosmetic condition.

1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.

2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.

Programs on PC:

•Overlord 2

Version 2.1.0.0

•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.

'Shutter Counter 1984048'.

3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738

1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 Lab

ITEM-30514

This Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 was removed from a university lab where it was surplus to requirements.

The pump has been tested with a controller (not included) and is in working order, but has not been tested under a vacuum.

It is in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fujifilm FLA-3000R Fluorescent Image Analyzer Spares/Repairs

ITEM-30522

This was removed from a university lab where it was surplus to requirements.

The unit powers up but a warning light flashes. It was not tested further.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

TQ TD1050 Steam Engine Trainer Teaching Rig Apparatus Lab

ITEM-31869

TQ TD1050 Steam Engine Trainer Teaching Apparatus Rig

This was removed from a university lab where it was surplus to requirements.

It is in full working order.

Included are;

TD1050 General Assembly

TQ165554-001

TD1050 - DTS2 Torque/Speed Display Unit

TQ160508-001

TD1050-DT1 Temperature Display

TQ165554-001

VDAS-F - VDAS Frame Mounted Version

TQ156326-009

Grosvenor Pump

Model - 5583

SN - 21278

Dynatherm Part no. 42673

SN - 13107-1

£ 500.00 (ex. VAT) 1 in stock

Wykeham Farrance Oedometer CBR Testing Lab

ITEM-34568

This Wykeham Farrance Oedometer CBR Testing was removed from a university lab where it was surplus to requirements.

The unit powers up the hand control unit works correctly, and the hydraulic ram goes up and down freely.

It is in reasonable cosmetic condition with marks from use.

£ 500.00 (ex. VAT) 1 in stock

Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank

ITEM-34584

This Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank was removed from a university lab where it was surplus to requirements.

The unit appears to be in good condition, but it has not been tested.

Last service date: 06/10/2021.

Internal dimensions: 21cm x 60cm.

Capacity: 6 racks, 6000 2ml vials.

£ 500.00 (ex. VAT) 1 in stock

Pair of FluidX XTR-Single Tube Readers Lab

ITEM-34735

2 x FluidX XTR-Single Tube Reader Lab

These items were removed from a university lab where they were surplus to requirements.

Both items power up and are in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Spellman Power Supply RSBX30X3077 Lab

ITEM-34855

Spellman Power Supply RSBX30X3077

Model: RSBX30X3077

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we are unable to test it at our facility.

Includes 9-pin FEMALE DIN Cable.

£ 500.00 (ex. VAT) 1 in stock

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260 Lab

ITEM-34897

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260

This was removed from a university lab where I was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with marks from use. The turbo fan blade moves freely and are in good cosmetic condition.

DN 100 ISO--K, 2P

Mod - Nr PM P02 130

19 pin DIN MALE connector port is in good cosmetic condition.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card Lab Spares/Repairs

ITEM-35094

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with its cycle timer. It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab

ITEM-35288

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle

This was removed from a university lab where it was surplus to requirements.

Included are;

702 SM Titrino with remote.

The unit powers on and performs self-check.

703 Ti Stand

We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.

Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Arcturus PixCell II Laser Capture Microdissection Microscope System Lab Faulty

ITEM-35289

Arcturus PixCell II Laser Capture Microdissection Microscope System Lab

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered up, although due to the faults listed below this system is listed as Spares/Repair.

Faults:

The PCi graphics card is faulty.
Camera not included to operate as a complete system.
The microscope does not include any eyepieces or objectives.
The control unit cable sleeving is damaged.

The system comprises the following:

Arcturus PixCell II Microscope

Arcturus PixCell II Control unit

Computer - Dell OptiPlex GX1

Software installed: Arc200 1.0.2

Monitor - NEC MultiSyncLCD1550V

£ 500.00 (ex. VAT) 1 in stock

Synbiosis aCOLyte 3 Colony Counter 8000/SYN Lab

ITEM-35291

This Synbiosis aCOLyte 3 Colony Counter was removed from a university lab where it was surplus to requirements.

This unit powers up with a 12V DC power adapter (not included). The device runs through the 3 different start-up stages but has not been tested further.

It is in good cosmetic condition with marks from use.

£ 500.00 (ex. VAT) 1 in stock

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM Lab

ITEM-35530

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM

This was removed from a university lab where it was surplus to requirements.

The gate fully opens and closes, rubber seal still present. It is in good cosmetic condition with marks from use.

£ 500.00 (ex. VAT) 1 in stock

Lot Of Glassware Racking For Laboratory Lancer Dishwasher

ITEM-35617

These were removed from a university lab where they were surplus to requirements.

There are 6 units in total

50cm X 50cm X 21cm

£ 500.00 (ex. VAT) 1 in stock

Xerox Phaser 7400 Laser Printer With Ink Cartridges

ITEM-35876

Xerox Phaser 7400 Laser Printer With Ink Cartridges

This was removed from a university lab where it was surplus to requirements.

It powers up and is in good working order.

Includes 4 x ink cartridges:

-1 x Cyan (Imaging unit 108R00647)

-1 x Magenta (Imaging unit 108R00648)

-1 x Yellow (Imaging unit 108R00649)

-1 x Black (Imaging unit 108R00650)

Max prints per minute- 40

Model number- N31201B

Serial number- WNC757283

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Ace Glass Jacketed Pressure Reaction Vessel 14cm Flange Bottom Outlet

ITEM-36059

Ace Glass Jacketed Pressure Reaction Vessel 14cm Flange Bottom Outlet

This was removed from a university lab where it was surplus to requirements.

The unit is new and shows no signs of use.

The flange at the bottom is 14cm, though there is no suggestion of the volume.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

44 x Sony XCD-X710CR Industrial Firewire Cameras and Firewire Cables

ITEM-36556

44x Sony XCD-X710CR Industrial Firewire Cameras

43x HR F1.4/8 mm Lenses

1x 2/3" F1.4 f=6mm lens

100x 10 meter Firewire cables

S/N: UNIB CAB6T6-100

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Christie Mirage Model S+4K Commercial Projector Spares/Repairs

ITEM-36557

Christie Mirage Model S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up but is displaying with a green tinge. We were unable to get this to change.

The lamp has run for 780 hours.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

21 x Fisherbrand 5000ml Conical Flasks FB33137 Lab

ITEM-36620

21 x Fisherbrand 5000ml Conical Flasks FB33137

These were removed from a university lab where they were surplus to requirements.

The units are used but are in good condition.

£ 500.00 (ex. VAT) 1 in stock

Kryo Planer Biomed 10 Series System Lab Spares/Repairs

ITEM-37143

Kryo Planer Biomed 10 Series System

This system was removed from a university where it was surplus to requirement.

The system failed PAT on insulation. It is sold for spares/repairs.

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 series Controller Key

All units listed above power on and are in good cosmetic condition, neither have been tested further at our facility.

1x LNP4 Planer freezer Pump:

Model LNP4 13181

This item is in reasonably good cosmetic condition, but due to it requiring a separate power supply, we are unable to test it at our facility.

£ 500.00 (ex. VAT) 1 in stock

HasKris Recirculating Chiller S/n HA007835 Lab Spares/Repairs

ITEM-37147

This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further at our facility.

It is in good cosmetic condition, with some marks from use.

Some of the components have been removed, it is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Compact LidPark P00155 Lab

ITEM-37180

Thermo Scientific Compact LidPark P00155

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers up, we are unable to test it further at our facility.

Model: LidPark P00155

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Spares/Repair

ITEM-37195

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, however, during testing, the unit powered on but emitted buzzing sounds followed by hissing and smoke.

Therefore, it is listed as Spares/Repair

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Projector Lens Hitachi Kodak Sanyo Elmo Isco-Gottingen Lab

ITEM-37209

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

4 x Sanyo LNS - S20
2 x Hitachi LL-503
1 x Hitachi LL- 504
1 x Isco-Gottingen F =250mm
1 x Kodak Carousel S-AV2000 F = 150mm
1 x Kodak Retinar F = 60mm
1 x Schneider-Kreuznach Carousel Procolar F = 100mm
3 x Kodak Slide Projection FF Lens F = 100-200mm
1 x Kodak Retinar F = 250mm
1 x Elmo zoom lens F = 180-300mm
1 x Isco-Gottingen Vario-Projar 70-120mm
1 x Kodak Retinar F = 150mm
2 x Kodak Retinar F = 180mm
2 x Kodak Long Focal Length Lens
Assortment of glass lens and bulbs

£ 500.00 (ex. VAT) 1 in stock

Panasonic Model No. AW-HE60 CCTV Camera

ITEM-37269

Panasonic AW-HE50 CCTV Cameras

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The previous client has stated it was in full working order prior to removal.

This item was tested with an in-house power supply cable. (not included.)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

ITEM-37273

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

This item was removed from a university laboratory where it was surplus to requirements.

The Savant SPD1010 SpeedVac powers on but encounters issues during operation. The lid fails to lock when a program is initiated, and although the rotor slightly moves, it does not fully run.

The AC-1 Phase motor operates correctly when tested independently but does not power on when connected to the SpeedVac.

Due to these issues, this unit is listed for spares or repair.

Model: SPD1010

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Typhoon Trio+ Variable Mode Imager Spares/Repair Lab

ITEM-37335

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu LC20 AD HPLC PUMP Lab Spares/Repairs

ITEM-37377

Shimadzu LC20 AD HPLC

This item was removed from a university where it was surplus to requirement.

It is in poor cosmetic condition and powers on, we are unable to test it further at our facility.

It is sold for spares/repairs due to the poor condition, we presume it is not working properly.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu Model LC20 AD HPLC Lab Spares/Repairs

ITEM-37386

Shimadzu LC20 AD HPLC

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Molecular Dynamics Typhoon Trio Internal Components Spare Parts From 2 Machines

ITEM-37478

Molecular Dynamics Typhoon Trio Internal Components – Spare Parts from 2 Machines

These items were removed from university laboratories where they were surplus to requirements.

This listing includes internal components from two Molecular Dynamics Typhoon Trio Imagers. The systems are not complete: one internal is missing the main circuit boards, while the other is missing the laser source.

Additional components may also be missing. Cables have been cut.

Includes:

Melles Griot Laser Class 3B
Model: 85-BCB-020-049
Serial No.: 1447K
Year: 2008

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Z Corporation ZPrinter 450 3D Printer Spares/Repair Lab

ITEM-37485

Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

Build speed: between 2 to 4 layers per minute

Build volume:

X-axis: 8 inches (203 mm)
Y-axis: 10 inches (254 mm)
Z-axis: 8 inches (203 mm)
Build capacity: 640 cubic inches
Layer thickness:
Minimum: 0.0035 inches (0.089 mm)
Maximum: 0.004 inches (0.102 mm)
Color shell thickness: 0.025 inches
Resolution: 300 x 450 dpi
Materials:
Powder: zp130
Binder: zb59
Print heads:
HP11 (clear binder)
HP57 (single tricolor CMY)

£ 500.00 (ex. VAT) 1 in stock

Rigaku Integrated Actor Controller Automated Crystal Transfer System

ITEM-37644

Rigaku Integrated Actor Controller Automated Crystal Transfer System

This system was removed from a university where it was surplus to requirement.

Both elements power up and are in excellent cosmetic condition, we are unable to test them further at our facility.

All items included:

Rigaku Controller

Serial No. 4016

Rigaku - Leister End Effector Dryer

Serial No. 1054

Accessories/Cables:

2 x serial ribbon leads

Power lead

Robot connection lead

Data lead

Dewar connection lead

Leister End Effector Heater instruction manual

£ 500.00 (ex. VAT) 1 in stock

INTEK Model LH200 Fraction Collector Lab

ITEM-37685

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

INTEK LH200 Fraction Collector Lab

ITEM-37686

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Biometra TGGE System with Controller and TGradient Lab

ITEM-37756

This Biometra TGGE System with Controller and TGradient was removed from a university lab where it was surplus to requirements.

All units are in reasonably good cosmetic condition and powered up, unable to test further at our facility.

System includes:

Biometra TGGE System

Serial Number: 1506138

Biometra TGGE System Controller

Serial Number: 1203176

Biometra TGradient

Serial Number: 1910339

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37792

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university lab where it was surplus to requirements.

The burner is in good cosmetic condition. However, the burner control screen has come apart from the control panel and is possibly broken. No testing has been carried out.

Due to the inability of testing and damaged control screen, this item is listed as Spares/Repair.

Specifications:

Model: LPN3/2051
Serial No.: 01333
Manufactured: 11.09.15
Output: 2051 KW/hr (7.0 MBtu/hr)

Includes:

Dungs Gas Train Valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter
Autoflame Combustion Management System:
Part Nos.: MM10005, MM10004
Serial Nos.: 20368, 051771
TEC Fan Motor:
5.5KW 415 volt
Type: 5.523TECAB35-IE3
T3A 13251-2
Gas Inlet Pipe: 2.5"

£ 500.00 (ex. VAT) 1 in stock

Campden Model 773 Micropipette Puller Lab

ITEM-37802

This Campden Model 773 Micropipette Puller was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

We are unable to test this item further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope Lab Faulty

ITEM-38264

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope

This system was removed from a university lab where it was surplus to requirements.

The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs.

Cosmetic and working conditions vary as stated below each item.

ADE Phase Shift MicroXAM-100

Model: MicroXAM-100

The item is in excellent cosmetic condition and shows no signs of damage.

However, when switched on, the item does not power on.

The item includes the following components:

- Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.

- 50AT NA 0.55 885 Objective: This objective is untested.

- Phase Shift Technology Rotary Stage 4360:

Model: Rotary Stage 4360

Serial#: L56332-3021

The rotary stage is in good cosmetic condition and shows no signs of damage.

However, when switched on, it does not power on.

- Javelin Video Monitor:

Model: BWM9BX

Serial#: 7070083

The video monitor is in good cosmetic condition.

It powers on with the power light illuminated.

- Nikon Transformer and Nikon 50W AD Lamp:

Model: UN

Both the transformer and the Nikon lamp are in good condition and fully functional.

The light output can be adjusted fully.

- AD Phase Shift Controller:

Serial#: E71000-500

The phase shift controller is in good cosmetic condition.

It powers on with the power light illuminated.

Unfortunately, further testing could not be conducted.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Luxonic LED Lighting Strips

ITEM-38992

Job Lot of Luxonic LED Lighting Strips.

These were removed from a university lab where they were surplus to requirements.

The items are all in good condition and have not been tested.

6 x Boxes:-

Ref numbers on boxes:-

S25416/1

SLS66/2R/1400/50.1W/DIM8

ZL900389

Box 1 - 4 x 35W SL370090 143cm Long

Box 2 - 2 x 50W ZL900389 140cm Long

Box 3 - 3 x x 35W SL370090 143cm Long

Box 4 - 3 x x 35W SL370090 143cm Long

Box 5 - 3 x x 35W SL370090 143cm Long

Box 6 - 3 x x 35W SL370090 143cm Long

2 x Boxes Labelled LED Plugs

PN - LF500043

FX-SC08-G2-CT2PF-0500 14XFS20

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leitz Dialux 22 Fluorescence Microscope With Camera + Control Unit Lab Faulty

ITEM-39087

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit

This system was removed from a university lab where it was surplus to requirements.

The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp.

Due to the faults listed above, this system is listed as Spares/Repair.

The system comprises the following:

Leitz Vario Orthomat Controller
Leitz Power Supply for Lamp
Leitz Vario Orthomat 2 Camera
Leitz Wetzlar 100W Lamp (Type: 307-143.003)

5 x Objectives:

NPL Fluotar 6.3/0.20
NPL Fluotar 16/0.45
NPL Fluotar 40/0.70
Leitz EF 63/0.85
Leitz PL 2.5/0.08

2 x Leitz Eyepieces Periplan GW 10x M

Model: Dialux 22

All Products

Filters