All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan CR 412 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-37144

Jouan CR 412 Centrifuge

This unit was removed from a university where it was surplus to requirement.

This item is in reasonably good cosmetic condition.

It powers on, but the button functions are unresponsive to the unit, therefore unable to conduct any testing.

The lid opened with manual emergency release.

It is sold as Spares/Repairs.

Includes the following:

2x Swinging Buckets:

Part no: 11174154

Volume: 450ml

Bucket Vial Adaptor Inserts:

1x set 7x 50ml vials - RED

1x set of 7x 15ml / 16x 6ml vials - BROWN

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

ITEM-41652

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted.

Therefore, this item is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller B-741 Lab Spares/Repairs

ITEM-41104

Buchi Distillation Chiller B-741

This was removed from a university lab where it was surplus to requirements.

The unit did not power up in tested and we were informed that it was out of order and non-function prior to collecting it.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller B-741 Lab

ITEM-41489

Buchi Distillation Chiller B-741 Lab

This item was removed from a university where it was surplus to requirement.

It powers on but is in poor cosmetic condition, we are unable to test it further at our facility.

The unit is sold for spares/repairs as we believe it will need quite a bit of remedial action to get it working properly.

It is missing one of is feet.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fisher Scientific Isotemp Recirculating Chiller Lab Spares/Repairs

ITEM-41106

Fisher Scientific Isotemp Recirculating Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the lab confirmed it was not pumping correctly, and therefore not cooling correctly prior to collection.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7883 Lab Glassware Washer Spares/Repairs

ITEM-35868

Miele Professional G 7883 Lab Glassware Washer

The unit did not power up in testing. It is sold for spares/repairs.

It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Shandon Excelsior Tissue Processor Lab SPares/Repair

ITEM-39981

This Thermo Electron Corporation Shandon Excelsior Tissue Processor was removed from a university lab where it was surplus to requirements.

The unit powered up initially but quickly faded.

It has a suspected PSU fault.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 160 CO2 Laborator Incubator Lab

ITEM-39007

Binder ED23 Drying And Heating Laboratory Oven

This was removed from a university lab where it was surplus to requirements.

The item powers on but the displays "error" after a short whilethat prevents the item from being tested.

It is in very good cosmetic condition.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carbolite CTF 12/100 Tube Furnace Lab Spares/Repairs

ITEM-36639

Carbolite CTF 12/100 Tube Furnace

This was removed from a university lab where it was surplus to requirements.

Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Dimension BST 1200 3D Printer Spares/Repairs

ITEM-39272

Dimension BST 1200 3D Printer

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition, both internally and externally.

It does not power on, therefore it's sold as Spares or Repairs.

The main board, junction board, CCD board, lighting board, I/F board, laser board, and panel board all have been disassembled from the main unit.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors AG HT Ecotron Shaking Incubator Lab Spares/Repairs

ITEM-39829

Infors AG HT Ecotron Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator is in reasonably good cosmetic condition, both internally and externally.

It powers on successfully, with display screens, buttons, and interior lights in working order. While the shaker motor can be heard, there is no movement from the platform, which may indicate a broken or slipped belt.

The temperature functionality is in good working order (thermometer not included).

Specifications:

Platform Dimensions (W×D): 42×42 cm
Model: HT Ecotron
Serial No.: 109025

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

BD FACSCalibur Flow Cytometer + Transformer Lab

ITEM-45456

"Attributes not completes."

BD FACSCalibur Flow Cytometer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition but has not been in use for many years; therefore, it likely is not in working order.

Due to restrictions on operating lasers at our site, we are unable to test the item.

As we are unable to test the item and its likely non-functional status, it is listed as Spares/Repair.

The power supply is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet - Damaged Base Lab

ITEM-39859

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, but is listed as Spares/Repair due to damage to the base of the cabinet.

Model: NordicSafe NC2 - 4L8

Serial: NC2-4L8-2013-80689

£ 500.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

ITEM-39052

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000i Benchtop Centrifuge Lab Spares/Repairs

ITEM-37436

MSE Mistral 3000i Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature.

Additionally included:

1 x MSE Rotor

Model BS4402

7 x Swinging Buckets:

Volume: 250ml

Bucket Adaptors:

6 x Blue

Holds: 12x 5ml Vials

7 x Grey

Holds: 4 x 12ml Vials

8 x MSE Brown

Holds: 1 x 100ml VIals

1 x Hex Key Locking Bar

£ 500.00 (ex. VAT) 1 in stock

Buchi Vac V-500 Diaphragm Vacuum Laboratory Pump Lab

ITEM-24903

Buchi Vac V-500 Diaphragm Vacuum Laboratory Pump Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, powers on, and draws a vacuum, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

ITEM-39999

Sanyo MCO-18AIC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

Features 3 Shelves.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

This item does not power on, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge w/ S40 Rotor Lab

ITEM-45413

Jouan B4i Benchtop Centrifuge with S40 Rotor

This item was removed from a university where it was surplus to requirements.

The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit.

It is in fair cosmetic condition, showing signs of general use.

Includes:

S40 Swinging bucket rotor with 4 buckets
4 additional buckets
12 x bucket inserts

Specifications:

Model: B4i
Serial No.: 30202056
Maximum RPM: 14,000 (unit); 4,300 (rotor)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

ITEM-35616

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition both internally and externally.

When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Biofuge 22R Centrifuge Lab Spares/Repairs

ITEM-35675

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Amersham Biosciences AKTA Prime FPLC System Lab

ITEM-36304

Amersham Biosciences AKTA Prime

This was removed from a university lab where it was surplus to requirements.

The unit was serviced but failed the service. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has no screen and required a new CO2 sensor prior to the screen being removed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer Lab

ITEM-41127

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wallac 1450 Microbeta Trilux Liquid Scintillation -19994 Lab Spares/Repairs

ITEM-19994

Wallac 1450 Microbeta Trilux Liquid Scintillation

The system tripped ad RCD on the main supply during testing. The internal PSU has shorted.

It is sold for spares/repairs.

Included are;

Microbeta V4.6 Protocol Disk

1450 Microbeta Trilux Main Program 4.6

Comes with:-

Belinea 15" Monitor - Powers on

HP Keyboard

Logitech Mouse

HP Vectra VL5/166 MMX Series 5 DT - PC Does not power on. HDD removed. We left it with the system in case it has useful PCI cards.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter BioMek FXP Laboratory Automation Workstation System Faulty

ITEM-39234

Beckman Coulter BioMek FXP Laboratory Automation Workstation System

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, although due to the following error; "D1 axis error:pump failed to send boot request. (0512)."

we are unable to test it further, and it is listed as Spares/Repair. We suspect the tip loader is faulty.

This error prevents the system from connecting to the software.

This system also includes the following:

Beckman Coulter Accuframe
Thomas 669BESUU44TFE Pump
BioTek Valve Module
All relevant manuals and guides
Sami WorkStation EX Software 4.0
Software setup guide
2 x 96 well tip holders with all tips present
2 x light curtain test rods
Filter regulator NAW2000-N02D-C
2 x boxes of spare parts and replacement parts
9 x bottles
pipes and connectors for bottles
PC + Monitor
Keyboard
Microscan MS3

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge Lab Spares/Repairs

ITEM-45431

Eppendorf 5804 R Centrifuge Lab

This item was removed from a university where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. However, it displays "Error 14," indicating an electrical fault, and also has a faulty lid locking mechanism.

Due to both errors listed above, this item is listed as Spares/Repair.

Specifications:

Model: 5804 R
Serial No.: 5805CI964308

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Refrigerated Centrifuge 5804 R Lab Spares/Repairs

ITEM-41484

Eppendorf Refrigerated Centrifuge 5804 R Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore we are unable to test it further, and it is listed as Spares/Repair.

The control board is faulty, and is loose inside the chamber.

There is no rotor.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Geneflow Sensoquest LabCycler Gradient Laboratory Thermal Cycler Lab Faulty

ITEM-41560

Geneflow Sensoquest LabCycler Gradient Laboratory Thermal Cycler Lab

This item was removed from a university where it was surplus to requirement.

The unit did not power up in testing. it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs

ITEM-41561

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with CO2 leaking.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab Spares/Repair

ITEM-45126

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

The item powers on and is in a reasonable used cosmetic condition.

It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom.

During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.

Therefore, it is listed as Spares/Repair and no further testing was conducted.

Specifications:

Model: U570 -86
Serial No.: 1004-5204-1103

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Walker All In One Fumigation Units Lab

ITEM-46390

Job Lot of 6 x Walker All In One Fumigation Units Lab

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included is the following:

6 x Walker All In One Fumigation Units

£ 500.00 (ex. VAT) 1 in stock

Anzai AZ-733V Respiratory Gating System w/ Wave Deck, Phantom Body & Sensor Port

ITEM-42134

Anzai AZ-733V Respiratory Gating System with Wave Deck, Phantom Body & Sensor Port

This system was removed from a university laboratory where it was surplus to requirements.

All units power on and are in great condition with minimal wear. No further testing has been conducted.

Includes:

Anzai AZ-733V Phantom (Model: AZ-733V Phantom, S/N: 610319, P/N: 400073-27)
Wave Deck (Model: Wave Deck, S/N: C0611326, P/N: 400073-2)
Sensor Port (Model: Sensor Port, S/N: C0611326, P/N: 400073-1)
Load cell HIGH + LOW for Phantom
AZ-733V Respiratory Gating System Software Install Disc Version 2.2H for Windows XP (P/N: 400073-24)
User Manual
Interfacing / Installation Manual

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Spares/Repairs

ITEM-36885

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonable, used cosmetic condition.

The centrifuge was tested at a high spin rate and achieved approximately 1650rpm. Temperature control tests were performed; the system failed to reach the set temperatures of -20˚C and 37˚C, only stabilizing around 20˚C.

Due to the temperature faults experienced during testing, this item is listed as Spares/Repair.

Includes:

Cart/stand: Dimensions L78 x W70 x H73 cm
4 x swinging buckets
2 x adaptors for 12 x 15ml tubes each
2 x adaptors for 50 x 0.5ml tubes each
2 x adaptors for 32 x 1.5ml tubes each (PN-10-5043)

Specifications.

Model: HT4 Series 2
Serial No.: 5794

This system does not include a vacuum pump.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

£ 500.00 (ex. VAT) 1 in stock

INTEK Model LH200 Fraction Collector Lab

ITEM-37685

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

INTEK LH200 Fraction Collector Lab

ITEM-37686

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Mixed Job Lot of Laboratory Equipment - Hoefer, Sigma, Labnet, Megger, Beckman

ITEM-46873

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Unit 8x7 Lab

ETP Active Film Electron Multiplier Lab

Extreme Networks Black Diamond BD 8800 G48Ta Model - 41515 Switch Module

Extreme Networks Black Diamond 8800 MSM-48c Model - 41213 Network Switch Module

15 x Extreme Networks LX4 XENPAK Model - 10114 900369-10-02

Supertech Quiet Air Compressor

Model Display Replica of Rhinovirus - Common Cold Virus - A.T.O.M.

Corbett CG-1 Palm Cycler Laboratory Thermal Cycler PCR Machine Lab

Techne FlexGene FFG02FSD Benchtop Thermal Cycler Lab

Brandenburg Alpha Series Model: 507R High Voltage Power Supply Lab

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets Lab

Labnet Vortemp 56 Microplate Shaking Incubator Lab

Welch 2562C-02 Standard Duty Dry Vacuum Pump Lab

UVP Gel Documentation System 97-0070-02 w/ Camera & PSU Lab

Nortel Erbium Doped Fiber Amplifier with Key Lab

Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 with Key Lab

Beckman 166 Detector Lamp Replacement Deuterium Lamp Kit - P/N: 538706

Mitsubishi Graphic Operation Terminal Panel GOT1000 Model - GT1275-VNBD

Hewlett Packard HP 6890 Series Injector Autosampler G153A Lab

Edwards AIM-PL-NW25 Active Inverted Magnetron Gauge

Rank Brothers Model 10 Oxygen Measurement Unit Lab

Rank Brothers Lab Model 10 Integrated Oxygen Measurement Unit

Rank Brothers Model 10 Lab Integrated Oxygen Measurement Unit

Rank Brothers Digital Model 10 Integrated Oxygen Measurement Lab Unit

Griffin And George LTD Vernier Microscope W/ Box of Various Objectives

Hybaid Hybridisation Rotisserie Mini Oven Lab

K.E. Developments Backscattered Detector

Megger 32 PAT Tester Lab

Thermo Scientific 8-Channel Decapper w/ Stand Lab

Lot Of Glass Reagent Bottle Stoppers Lab

All Products

Filters