All Products

£ 500.00 (ex. VAT) 1 in stock

Leybold S16B/WS Trivac Rotary Vane Vacuum Pump

ITEM-39189

Leybold S16B/WS Trivac Rotary Vane Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and draws suction but has not been tested further.

It is in reasonably good cosmetic condition, with some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell AMA240N Floorstanding Autoclave Lab Spares/Repairs

ITEM-39207

Astell ASA240 Floorstanding Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid.

This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair.

As displayed, it is in poor cosmetic condition internally.

Specifications;

Model- AMA240N
S/N- CLN51381

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

£ 500.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nikon Diaphot 300 Microscope *Condenser Removed* Lab Spares/Repairs

ITEM-39790

Nikon Diaphot 300 Microscope *Condenser Removed*

This microscope was removed from a university lab where it was surplus to requirements.

All mechanical elements are in good working order. The unit does not include the power supply or condenser therefore we are unable to perform any other tests. It is in good cosmetic condition with minor marks.

As stated in the title the condenser is not included.

It is made up of the following modules;

Nikon ND2 Filter

Nikon ND4 Filter

Nikon CFWN 10x/20 Eyepiece x 2

Nikon 100w Mercury Lamphouse LH-M100C-1

Nikon Halogen 12V 100W Microscope Lamp

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

ITEM-39828

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

These items were removed from a university where they were surplus to requirement.

All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.

Therefore, this listing is sold as Spares/Repair.

All items included are as follows:

Model1#: CR21 Controller

Serial1#: 10521389

Model2#: CR21 Transformer Box

Serial2#: 10521391

Model3#: CR21 Cryochamber

Serial3#: 10521390

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Aeromatic Fielder MP-Micro Fluid Bed Dryer Spares/Repair Lab

ITEM-39838

Aeromatic Fielder MP-Micro Fluid Bed Dryer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on.

Therefore, we are unable to test it further at our facility, and it's listed as Spares/Repair.

The item also contains various Assembling Dryer/ Top Sprayer Containers and cables, as seen at the end of the slide.

Specifications;

Model: MP-MICRO
Serial#: 04012
Date: FEB 04

£ 500.00 (ex. VAT) 1 in stock

2 x Multi-Tier Rack Laboratory Trolleys

ITEM-39960

Multi-Tier Rack Trolley x 2

This item was removed from a university lab where it was surplus to requirements.

Feature 3 graduated shelves.

Both trolleys are in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

£ 500.00 (ex. VAT) 1 in stock

Leitz Wetzlar Dialux 20 Microscope w/ 3 x Objectives Phaco, Plan, NPL Lab

ITEM-40988

Leitz Wetzlar Dialux 20 Microscope

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, with all mechanical elements in working order.

Includes the following.

1x Leitz Lamp Power Supply

Objectives:

1x Leitz Wetzlar P 10/0.25 170/-

1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2

1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Milestone Ethos plus 2 SEL Microwave Solvent Extraction Labstation Spares/Repair

ITEM-41135

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller.

The system is sold for spares/repairs.

-1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller

1x easywave chip card for the controller

S/N- 0205722

-2x Rotor' for microwave

- Relevant vessels and safety shields for rotors

-2x ATC-FO sensors for microwave

-2x Torque wrenches for rotor

-2x Extraction Pipes

1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620

Includes: Pipette tracker v3.3 Software

£ 500.00 (ex. VAT) 1 in stock

Vacuum Generators LTD (UHV) Valve & Turbo Molecular Chamber Lab

ITEM-41171

Vacuum Generators LTD (UHV) Valve & Turbo Molecular Chamber Lab

These items were removed from a university where they were surplus to requirement.

Both items are in good cosmetic condition, we cannot test them at our facility.

£ 500.00 (ex. VAT) 1 in stock

12 x Perkin Elmer Lumina Lamp & 2 x Baird Hollow Cathode Lamp, K-Na, Ba, Sn etc

ITEM-41172

12 x Perkin Elmer Lumina Lamp & 2 x Baird Hollow Cathode Lamp, K-Na, Ba, Sn etc

These were removed from a university where they were surplus to requirement.

The items have not been tested and may vary in condition. It is anticipated that some items may not be functional, whereas others may be in near new or unused.

Listed items are as follows:

12 x Perkin Elmer Lumina Lamp

P/N: N305-0115 Cd (Box empty)

P/N: N305-0214 Co-Cr-Cu-Mn-Ni

P/N: N305-0157 Pb (Sealed box, presumed new)

P/N: N305-0211 Al-Cu-Fe-Ti

P/N: N305-0142 Li

P/N: N305-0109 Ba

P/N: N305-0108 B

P/N: N305-0186 V

P/N: N305-0204 K-Na

2x P/N: N305-0175 Sn

P/N: N305-0155 P

P/N: N305-0176 Sr

2 x Baird Hollow Cathode Lamp

Type: Ca-Mg

Type: Na-K

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Waters 2525 Binary Gradient Module Lab Spares/Repairs

ITEM-41181

Waters 2525 Binary Gradient Module Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but does not power on. Therefore, we are unable to test it, and it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer 785A UV-VIS Detector Lab

ITEM-41330

Perkin Elmer 785A UV-VIS Detector Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Sutter Lambda LS Illuminator LB-LS/17 Lab

ITEM-41429

Sutter Lambda LS Illuminator LB-LS/17

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but the power switch is stuck in the on position.

We are unable to test it further at our facility.

Lamp Runtime: 05573.7 hours

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Flexar PDA Detector - Spares/Repair Lab

ITEM-41445

Perkin Elmer Flexar PDA Detector Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, it remains inoperative due to suspected internal damage to the motherboard.

Therefore, it is listed as Spares/Repair

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

NESLAB Coolflow CFT-33 Refrigerated Recirculator Lab Sapres/Repairs

ITEM-41633

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Laboratory Isolation Table - White Lab

ITEM-41681

Isolation Table - White Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Instruments Labofuge 400R Function Line Lab Spares/Repairs

ITEM-41702

Heraeus Instruments Labofuge 400R Function Line Lab

This item was removed from a university where it was surplus to requirement.

It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested.

Therefore, it is listed as Spares/Repair.

Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ HP 7673 Injector Lab

ITEM-41843

Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ Hewlett Packard 7673 GC/SFC Injector Lab

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition and powers on. However, when the temperature was tested to its maximum of 325°C, it shut down at 203°C with the error message

"EPPA: SAFETY SHUTDOWN,"

Therefore, it is listed as Spares/Repair.

Furthermore, the included 7673 GC/SFC Injector could not be tested due to the absence of the controller.

£ 500.00 (ex. VAT) 1 in stock

Paar DMA 35 Density Meter Kit Lab

ITEM-41972

Paar DMA 35 Density Meter Kit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was tested with a 9-volt 6LR61 test battery, this is not included in the sale.

The kit consists of:

1 x Density meter

1 x Sanitex Eternal-Matic 2ml filling syringe

1 x Calibration screwdriver

1 x Wrist strap

1 x Original Hard plastic carry case

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 Vintage Microtome Knives With Sharpening strops and Whetstones

ITEM-42018

Job Lot of 13 Vintage Microtome Knives With Sharpening Strops and Whetstones

These items were removed from a university lab, where they were surplus to requirement.

The knife blades are all in very good condition, with sharp and undamaged cutting edges, appearing to have been well maintained, except for the hand knife, which has a poor cutting edge.

The wooden boxes are in excellent condition, except for two that are damaged.

The lot comprises:

3 x Shandon Nothung C wedge shape 20cm blades (circa 1967) in box
1 x Shandon Northung A concave 25cm blade (circa 1967) in box
1 x Unidentified C wedge 18cm blade in box
3 x MSE Ltd No. 9057.W wedge 9cm blades in box
2 x Cambridge Instruments rocking microtome knives (10cm blades) in box
1 x Unidentified wedge 8cm blade in leather case
1 x Hand knife with handle in poor condition in box
4 x Leather sharpening strops (30-35cm long), 2 in box
2 x 15cm whetstones
1 x Acrylic 15cm sharpener
1 x 25cm blade holder
3 x 20cm blade holders
1 x 17cm blade holder

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bartington MS2WF Magnetic Susceptibility System Lab Spares/Repairs

ITEM-42055

Bartington MS2WF Magnetic Susceptibility System

This system was removed from a university laboratory where it was surplus to requirements.

The units power on and are in good condition with minimal wear. The pumps function correctly, but an alarm sounds on the MS2WFP PSU.

Additionally, the system is missing the MS2 meter and probe.

Therefore, this system is listed as Spares/Repair.

Specifications:

MS2WFP Power Supply Unit
Model: MS2WFP
Serial No.: 134
MS2WF Furnace
Model: MS2WF
Serial No.: 134
MS2W Sensor
Model: MS2W
Serial No.: 150

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Protec Eco Max X-Ray Film Processor Lab Spares/Repairs

ITEM-42060

Protec Eco Max X-Ray Film Processor

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in fair condition with some wear. There are some spots of rust, and the baseplate is missing. Therefore, resulting in a visual PAT fail.

It is listed as Spares/Repair.

Specifications:

Model: Eco Max
Serial No.: 118630-1309-0841
REF: 1186-3-4000

£ 500.00 (ex. VAT) 1 in stock

Anzai AZ-733V Respiratory Gating System w/ Wave Deck, Phantom Body & Sensor Port

ITEM-42134

Anzai AZ-733V Respiratory Gating System with Wave Deck, Phantom Body & Sensor Port

This system was removed from a university laboratory where it was surplus to requirements.

All units power on and are in great condition with minimal wear. No further testing has been conducted.

Includes:

Anzai AZ-733V Phantom (Model: AZ-733V Phantom, S/N: 610319, P/N: 400073-27)
Wave Deck (Model: Wave Deck, S/N: C0611326, P/N: 400073-2)
Sensor Port (Model: Sensor Port, S/N: C0611326, P/N: 400073-1)
Load cell HIGH + LOW for Phantom
AZ-733V Respiratory Gating System Software Install Disc Version 2.2H for Windows XP (P/N: 400073-24)
User Manual
Interfacing / Installation Manual

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs

ITEM-42198

Beckman Optima L-60 Floor Standing Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition.

However, the display is not functioning correctly, showing only two dots in the TIME-HR-MIN and one dot in TEMP-°C.

Due to these issues, it is listed as Spares/Repair.

There is no rotor included.

Specifications:

Speed: 1,000 - 60,000 rpm
Temperature: 0°C - 40°C

Model: Optima L-60 Serial No.: L1M602

Rotational Counter: 417,132 x 10,000 rotations

£ 500.00 (ex. VAT) 1 in stock

Gynkotek Model 480 M 480 Low Pressure Binary Gradient Pump HPLC Lab

ITEM-42246

Gynkotek 480 Low Pressure Binary Gradient Pump HPLC

This item was removed from a university laboratory where it was surplus to requirements.

The pump is in good cosmetic condition, with a few small stain marks on the top cover.

It powered on successfully, displaying pump data and system parameters, including pressures and flow rates. The

unit allows selection and resetting of eight programs. Further testing could not be conducted at our facility.

Specifications:

Model (Data Plate): M 480
Model (Startup Screen): M480G
Serial No.: 9640053
Part No.: 5020.0010

£ 500.00 (ex. VAT) 1 in stock

MVE XC 34/18 Nitrogen Dewar Aluminium 34 Litres Capacity

ITEM-42275

MVE XC 34/18 Nitrogen Dewar

This item was removed from a university where it was surplus to requirements.

The dewar is in good cosmetic condition, with signs of use.

Specifications:

Model: XC 34/18
Serial No.: ARB97K105
Capacity: 34 litres
Neck Opening: 9cm
Holds: 6 canisters

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Double/Dual Screen IR Touch-screen Media Unit by Isomi Spares/Repairs

ITEM-42293

Double Screen Media Unit by Isomi

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition.

The unit features two 32" IR touch screens with built-in PCs. However, only the one screen is operational; the other does not power on and is non-functional.

Due to the partial functionality, this media unit is listed for spares or repairs.

It has Xibo Client Software installed.

Features

2 x 32" IR touch-screen including PC as standard
Runs on Windows 7
1 x Extended USB Port

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer 'Spares/Repair'

ITEM-42303

Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered it displays a persistent "Wrong Power" warning with irregular compressor activity and fails to cool.

Therefore, it is listed as Spares/Repair.

Specifications.

Model: Forma 906
Serial#: 812688-2375
Year: 2009

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer Lab Faulty

ITEM-42305

Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on. During testing, it failed to reach the set temperature of -40˚C, only cooling down to 7˚C.

Therefore, it is listed as Spares/Repair.

Additionally, three inner door slide catches are missing.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Spares/repairs

ITEM-42306

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing it failed to cool and remained at ambient temperature when set to -86ºc. Further inspection iden

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Denley Multipoint Inoculator A400 w/ Foot Pedal Lab

ITEM-42367

Denley Multipoint Inoculator A400 w/ Foot Pedal Lab

This item was removed from a university lab where it was surplus to requirement.

It in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The main unit successfully communicates with the included foot pedal.

£ 500.00 (ex. VAT) 1 in stock

Jenway 6100 Visible Range Spectrophotometer Lab

ITEM-42369

Jenway 6100 Visible Range Spectrophotometer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Floor Standing Autoclave Spares/Repair Lab

ITEM-42378

Rodwell Ensign 125 Floor Standing Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

Service and condition notes are as follows:

Unit powered on and lid opened without issue.
Evidence of the low water probe shorting onto the outside element, causing the machine to heat with low or no water.
All three heating elements were tested and found to be open circuit.
Three elements and the low water probe will need to be replaced.
It is advised that the unit be delivered to a specialist workshop if repair is to be undertaken.

Due to the faults identified, this item is listed as Spares/Repair.

Includes:

1 x USB memory stick
1 x inner basket

Specifications:

Model: Ensign 125
Serial No.: 2405
Year: 2015

Chamber dimensions: 46 cm diameter, 72 cm deep

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hitachi F-4500 Fluorescence Spectrophotometer System Spares/Repair Lab

ITEM-42393

Hitachi F-4500 Fluorescence Spectrophotometer System

This item was removed from a university laboratory where it was surplus to requirements.

The Hitachi F-4500 unit does not power on; however, it is in good condition with minimal wear. The previous owner said the PSU had failed.

Due to it not powering on it is listed as Spares/Repair

Includes:

Vigen Genie P3 500 Computer
Model: F-4500
Serial No.: 1163-004
Software: F-4500 FL_mnu - 2504060-05.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Don Whitely MK3 Anaerobic Bench Top Work Station Spares/Repair

ITEM-42468

Don Whitely MK3 Anaerobic Bench Top Work Station

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but is not in working order, mainly due to a faulty gas inlet valve.

It powers on with functional temperature control and cooling fans. Key issues include non-working internal power sockets, flashing low CO2 and N2 warning lights, and a broken outer door lock seal knob, which compromises the chamber's sealing.

Due to the faults listed above, this system is listed as Spares/Repair.

Features:

Uses hydrogen, nitrogen, and carbon dioxide or a standard anaerobic gas mixture.
Digital temperature controller for constant temperature maintenance.
Humidistat-controlled condensing plate for excess moisture removal.
30-litre interchange lock capable of holding 108 plates with vacuum flushing.

Includes:

User Instruction Manual

Serial No.: 3170S

£ 500.00 (ex. VAT) 1 in stock

MSE 4 x 750ml Windshield Rotor 43124-708 BS4402 with Buckets Lab

ITEM-42469

MSE 4 x 750ml Windshield Rotor 43124-708 BS 4402 With Buckets

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in very good condition. It was tested on a compatible centrifuge at its maximum speed of 3660 RPM and operated without issues.

Includes:

4 x 750ml MSE buckets

Model: 43124-708 BS 4402

Serial No.: 872183

Max RPM: 3660

Year: 1987

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Molecular Dynamics Storm 860 Molecular Phosphor Imager Spares/Repair Lab

ITEM-42477

Molecular Dynamics Storm 860 Molecular Phosphor Imager – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

The system powers on, with cooling fans and status lights operating. No further testing was possible due to the absence of a control PC and software.

The previous owner reported it as faulty, but no specific faults were disclosed.

Includes:

Imager unit only
1 x data cable

£ 500.00 (ex. VAT) 1 in stock

Hygromatic Wall Mounted Steam Humidifier Model C06-C / 380

ITEM-42544

Hygromatic Wall Mounted Steam Humidifier Model C06-C / 380

This item was removed from a university laboratory where it was surplus to requirements.

The unit powered on successfully, displaying version 1.09eT, and passed two internal self-tests. T

he pump activated briefly as part of the startup sequence. The function keys responded as expected, allowing access to various system parameters including steam output and operational modes. No further functional testing was carried out.

In very good cosmetic condition.

Includes:

3 x water-steam pipes
1 x used O-ring set (Part No. 3216071)
Fitted with a 16 amp 5-pin red plug

Specifications:

Steam output: 6 kg/hr
Steam hose connection: 25 mm
Condensate connection: 12 mm
Water supply pressure: 1–10 bar
Suitable water types: fully demineralised, softened tap water, or normal tap water (in soft water areas)

Model: C06-C / 380

Serial No.: 1002107

£ 500.00 (ex. VAT) 1 in stock

Digitimer Ltd Neurolog System Electrophysiology Lab

ITEM-42557

Digitimer Ltd Neurolog System – Electrophysiology

This system was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The system comprises the following modules (from right to left):

Rec. Amp NL021
Pulse Gen. NL031
Inhibitor NL061
Period Gen. NL071
6 x Counters NL081
Selector NL041
2 x Isol. Stim. NL051

Suitable for bench standing or rack-mounted applications.

£ 500.00 (ex. VAT) 1 in stock

Meso Scale Discovery Model 1250 Sector Imager Microplate Reader

ITEM-42564

Meso Scale Discovery Model 1250 Sector Imager

This item was removed from a university laboratory where it was surplus to requirements.

The unit powered on successfully, with the status light transitioning from red to blue shortly after startup. Cooling fans were operational, indicating basic system activity. However, no further testing could be conducted due to the absence of a user interface.

It is in good cosmetic condition.

Includes:

Meso Scale Discovery Model 1250 Sector Imager only (no cables or software included)

Model: 1250

Serial No.: 1251120516279

£ 500.00 (ex. VAT) 1 in stock

CECIL CE 2030 Spectrometer Lab

ITEM-42586

CECIL CE 2030 Spectrometer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specifications;

Model - CE 2030
S/N - 96 217
Hz Cycles/Sec - 50/60

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carl Zeiss LSM 5 Laser Module with 2 Lasos LGK lasers and Controller + PSU

ITEM-42756

Carl Zeiss LSM 5 Laser Module with 2 Lasos LGK Lasers, Controller, and PSU

This system was removed from a university laboratory where it was surplus to requirements.

The Laser Drive 9600 Series PSU powers on and also successfully powers the Lasos LGK 7812 ML 1 Controller, which runs with the large cooler operational.

We were unable to test the Carl Zeiss LSM 5 Laser Module due to our safety policy surrounding Class III Lasers, but we are told it was faulty.

It is sold for spares/repairs.

In good cosmetic condition.

Includes:

Carl Zeiss LSM 5 Laser Module
Serial No.: 850 351
Year: 1997
Laser Drive 9600 Series Power Supply
Model: LGN-7802-4
Serial No.: 794592
Lasos LGK 7812 ML 1 Controller
Manufacturing No.: 334
Lasos LGK 7628-1 Helium Neon Laser
Serial No.: 6194
15mW, Class 3B, 633nm, Year: 1997
Lasos LGB 7774 Helium Neon Laser
Serial No.: 459
5mW, Class 3B, 543nm, Year: 1997

£ 500.00 (ex. VAT) 1 in stock

Grant FH15 Flow Heater and FC20 Flow Cooler Lab

ITEM-42784

Grant FH15 Flow Heater and FC20 Flow Cooler

This system was removed from a university laboratory where it was surplus to requirements.

The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.

The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.

These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.

It is in good cosmetic condition.

Includes:

Grant FH15 Flow Heater (Serial No. 72311)
Grant FC20 Flow Cooler (Serial No. 72311)

Model: FH15 / FC20
Serial No.: 72311

£ 500.00 (ex. VAT) 1 in stock

Windley Bros Heavy Duty Isolation Anti Vibration Table

ITEM-42830

Windley Bros Heavy Duty Isolation Anti Vibration Table

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with surface rust present. We are unable to test it at our facility.

This anti-vibration table is constructed from cast iron and steel. The frame comprises angle iron legs with steel bar bracing, supporting a cast iron base.

Working height: 93cm.

Solid steel tabletop: 102 x 76 x 1.2cm

All Products

Filters