All Products

£ 500.00 (ex. VAT) 1 in stock

Genetix Qpix2XT Benchtop Colony Picker with Software & Accessories

ITEM-29738

This Genetix Qpix2XT Benchtop Colony Picker was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks from use.

No PC was supplied by the lab, but it is supplied with 2 Interface cards, Genetix Q soft xp Disc & 2 x Nonlinear Dynamics Ltd Progenesis PG220 Training Discs. As well as;

1 x Microsoft Keyboard.

1 x MOBI Monitor. Model: M15MPC.

2 x Keys.

Included with the Item are:

1 x 10 ltr Jun-Air Compressor.

Model: OF302.

The unit powers up and functions correctly. It is in good cosmetic condition with marks from use.

1 x Picking Application Manual.

1 x QSoft Data Tracking Application Manual.

1 x Gridding Application Guide.

1 x QPix2xt Robot Manual.

1 x Rearraying with Stackers Application Guide.

2 x Genetix Sample Injectors.

1 x Box of Performa N3010 High-Performance positively charged-nylon membrane.

1 x Box of 2.2ml Storage plate. Cat No. AB-0661. Description: 96 Square well storage plate.

4 x Box of Genetix X6011. Up Code XGE05025. Description: 96 Square well storage plate.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima TL Ultracentrifuge w/ Beckman TLA 100.4 Rotor Spares/Repair

ITEM-42968

Beckman Optima TL Ultracentrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition with minimal wear. However, the unit is non-operational: it does not run programs or operate normally. The door does not open unless the unit is manually stripped down and the door lock pin is pressed.

Additionally, the vacuum chamber does not hold pressure. Error messages displayed include CPU, VAC, and SPD.

Therefore, it is listed as Spares/Repair.

Includes:

Rotor: Beckman TLA 100.4
Maximum Speed: 100,000 RPM
Serial No.: 95U1272

Model: TL

Serial No.: CTL95E13

£ 500.00 (ex. VAT) 1 in stock

6 x Thermo Scientific Dispensing Cassettes - Metal Tip, Plastic Tip & 200cm Tube

ITEM-43075

6 x Thermo Scientific Dispensing Cassettes - Metal Tip, Plastic Tip & 200cm Tube

These items were removed from a facility where they were surplus to requirement.

All items are opened but unused.

Included;

4 x Standard Tube 200cm Dispensing Cassette Long

S/N - 832044309
S/N - 83214989
S/N - 832044310
S/N - 832044311

1 x Small Tube Plastic Tip Dispensing Cassette

S/N - 8356466

1 x Small Tube Metal Tip Dispensing Cassette

S/N - 8374205

£ 500.00 (ex. VAT) 1 in stock

Statebourne Bio 36 Nitrogen Dewar

ITEM-45505

Statebourne Bio 36 Nitrogen Dewar

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition. We are unable to test it at our facility.

Includes:

6 x Metal Cylinders

Double walled vacuum vessel.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Systec DB-45 Autoclave Spares/Repair Lab

ITEM-46571

Systec DB-45 Autoclave Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

YSI 2300 230V STAT Plus Glucose Lactate Analyser Spares/Repair Lab

ITEM-46578

YSI 2300 230V STAT Plus Glucose Lactate Analyser Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in reasonably good cosmetic condition, however, there is a missing side panel.

The previous owner had stated it is not in working order, though the reason is unknown.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

ITEM-46579

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. The casing is loose and required securing with a screw, suggesting it may have been opened previously.

The item powers on, but no further testing has been conducted. The previous owner reported it as non-functional, though the specific fault is unknown.

Therefore, it is listed as Spares/Repair.

Includes:

Pipe fittings
Grey connector box for the pipe system

£ 500.00 (ex. VAT) 1 in stock

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

ITEM-47154

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Ultimaker 2+ 3D Printer w/ Reel of 3DXTech PLA

ITEM-47255

Ultimaker 2+ 3D Printer w/ Reel of 3DXTech PLA

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Test video available on request.

Included;

Power Supply Cable

1 x Reel of 3DXTech PLA

£ 500.00 (ex. VAT) 1 in stock

Leitz Laborlux S Microscope Type 020-505.030 w/ 3 x Objectives 10/40/100x

ITEM-47270

Leitz Laborlux S Microscope Type 020-505.030

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

Includes:

2 x Leica Periplan 10x / 18 Eyepieces (519 750)

Objectives:

160/- EF 10/0.25 (519760)
*160/0.17 PL FLUOTAR 100/1.32 OIL (519847)
160/0.17 EF 40/0.65 (519762)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Helmer iLF105-GX Freezer Spares/Repair Lab

ITEM-46454

Helmer iLF105-GX Freezer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it was set to its minimum temperature of -20ºc and it failed to cool, instead rising in temperature from ambient.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U730M Biomedical Freezer Lab

ITEM-44674

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Type MDF-U730M Biomedical Freezer Lab

ITEM-44675

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

BD FACSCalibur Flow Cytometer + Transformer Lab

ITEM-45456

BD FACSCalibur Flow Cytometer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition but has not been in use for many years; therefore, it likely is not in working order.

Due to restrictions on operating lasers at our site, we are unable to test the item.

As we are unable to test the item and its likely non-functional status, it is listed as Spares/Repair.

The power supply is included.

£ 500.00 (ex. VAT) 1 in stock

Narishige Model-M0-203, MMW-23 Micromanipulator Parts Lab

ITEM-45198

Narishige Model-M0-203, Model-MMW-23, and Parts

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition; however, we are unable to test the functionality of the units.

Included Models and Serial Numbers:

Narishige Model M0-203

Serial No.: 9306078

Narishige Model MMW-23

Serial No.: 96003

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System Lab Spares/Repair

ITEM-46288

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System

This system was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further at our site.

The previous client has notified us that it is not in working order and that Qiagen no longer supports this instrument.

The system is in good cosmetic condition.

Includes:

Cupboards/drawers integrated into the stand
All bottles and solvent traps
A pump
9 x 1100µl tip rack holders
Multiple miscellaneous plate holders
Tube holding racks
Handles for moving the unit
4 x 50µl tip rack holders
1 pack of Elution Microtubes
1 BGR Bottle
Lubricating oil
Various QIAsoft 5.0 disks including operating system, protocol packages, and maintenance disks
Data handbooks
Manuals

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Oxford Instruments Nitrogen Cryostat - Spares/Repair Lab

ITEM-42889

Oxford Instruments Nitrogen Cryostat

This item was removed from a university laboratory where it was surplus to requirements.

The item is in physically complete condition but has not been tested. The internal thermometer has been removed, and wiring to the electrical feed through has been broken, affecting its operability.

Therefore, it is listed as Spares/Repair.

Includes:

Oxford Instruments Nitrogen Cryostat body
Associated wiring and connectors (incomplete/damaged)

£ 500.00 (ex. VAT) 1 in stock

Dudley Safes Heavy Duty Safe w/ Key

ITEM-42992

Dudley Safes Heavy Duty Safe w/ Key

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

1 x Key

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U730M Biomedical Freezer Lab

ITEM-44673

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62 cm

14 x Containers - 62 x 31 x 16 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Liebherr GKPv 6522 Glass Fronted Fridge - Spares/Repair Lab

ITEM-46622

Liebherr GKPv 6522 Glass Fronted Fridge - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, during testing it failed to cool beyond 13ºc when set to 1ºc.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Various Sykes-Pickavant Bearing / Gear Pullers - Spares/Repair

ITEM-47407

Job Lot of Sykes-Pickavant Bearing/Gear Pullers

These items were removed from a university where they were surplus to requirement.

A large assortment of bearing and gear puller components, mostly—if not entirely—manufactured by Sykes-Pickavant in the UK. All parts appear to be in good used condition.

Please note:

We cannot guarantee that all pullers are complete.
Some extra bolts may be required to connect the legs to the pullers.
All items are housed in a built tool chest for convenient storage and transport.

Therefore, this job lot of items are listed as Spares/Repair.

Study the photos carefully for full details on included parts and condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab

ITEM-46525

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but has not been tested on site due to the service report attached stating;

Rotor lock: Seized, cannot remove rotor

No reported problems Service and check as above Unit is old

Note 6: door seal has shrunk and will not go back into place

Note 9: chamber is corroded due to substance.

Note 10: gas struts have failed, lid is heavy and can fall.

Note 12: drive shaft housing corroded.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220 - Spares/Repair

ITEM-46647

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the previous owner has stated it is not in working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Mixed Laboratory Equipment - Thermo, Bio-Rad, Bibby, Jenway, APC Lab

ITEM-44677

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-10245 Thermo Scientific Hybaid HB-OV-BM Shake 'N' Stack Bottles (Lot of 8)

ITEM-06121 6 x Hybaid Tubes

ITEM-09662 Multiple Laboratory Equipment

ITEM-44682 Bio-Rad PowerPac Basic

ITEM-14753 Thurlby Thandar TG215 2MHz Function Generator Lab

ITEM-24925 Electromantle MA Solid State Stirrer Heating Mantle EMA0500/CEB MK4 lab

ITEM-11207 Oltronix Series Resistor Unit 11S 200k-4RVM MK2 Power Supply

ITEM-16460 Atto AE-6200 Slab Chamber for Gel Electrophoresis Lab

ITEM-44683 Blue Pump

ITEM-18912 Edwards Inlet Desiccant Trap Model ITD 20 Lab

ITEM-44684 Media Bottle Kimax ISO, GL45, 1000 ml, Blue PP Cap - 10 per box

ITEM-26043 Sirius D-PAS Dip Probe for Absorption Spectroscopy Lab Spares/Repairs

ITEM-44685 Moser Arco Clippers

ITEM-26843 HWM Transmitter

ITEM-15483 Waters P/N 201000193 Fluorescence Detector Performance FLR Lamp Lab HPLC

ITEM-27169 Opened box of Chromatography paper

ITEM-03760 Salon Systems Just Wax Heaters x 6

ITEM-11774 Rio Slim Gym MT100-10 Professional 10 Pad Ultimate Body Toner

ITEM-01700 Sorisa MC-01 Portable Galvanic Current Isometric Device

ITEM-07335 Morgan 509 Cardiac Monitor Medical Laboratory Lab Equipment

ITEM-26820 Morgan 509 Cardiac Monitor

ITEM-26571 Box of mixed Manuals

ITEM-09419 Baxter Edwards Critical-Care VGS1 Vigilance Monitor Lab

ITEM-17626 Eppendorf 5424/5424R Centrifuge Rotor - 24 x 3.75g - 15000rpm - Lab

ITEM-23229 Quantum Personal Oxygen Monitor /Misc items

ITEM-22223 BP-2000 Analysis Interconnect cable

ITEM-26826 Hellige Cardiotest EK1 & Accessories

ITEM-26575 Box of mixed manuals

ITEM-26783 VTS Unit

ITEM-30141 Quantum oxygen deficiency monitor & alarm

ITEM-25827 Pickering Laboratories CHX 650

ITEM-25837 BOC Carbon Dioxide Monitor & Alarm

ITEM-25865 SkyTronic DC Regulated PSU

ITEM-17772 Accoson Pre Measured Adult Blood Pressure Machine Sphygmomanometer Lab

ITEM-25838 Boxed Nitrate Comb.ISE/BNC

ITEM-25870 Ammonium Ion Selective Electrode

ITEM-25839 Boxed Conductivity Meter

ITEM-25871 Jenway Conductivity Meter Electrode

ITEM-25855 Bibby 3-in-1 Stick Meter

ITEM-25856 ELE stick meter

ITEM-27237 APC Back-UPS CS 650

ITEM-25854 Stick Meter in case

ITEM-25849 Boxed potassium ion selective electrode

ITEM-27641 Powervar UPS

ITEM-26790 RS Line Voltage Conditioner

ITEM-16645 UPS Riello Model UST103033XRU Uninterruptable Power Supply Spares

ITEM-26921 APC Back-UPS RS 500

ITEM-27218 APC Smart UPS 700

ITEM-25862 Evans Electroselenium AC Motor

ITEM-25848 Tecator 1022 Hot Plate

ITEM-25847 Clifton Water Bath

ITEM-25846 Clifton Water Bath

ITEM-25828 Tecator 1022 Hot Plate

ITEM-25822 UV Light

ITEM-25843 Regal EXPERT 320

ITEM-44686 Belkin UPS

ITEM-44687 Shrewsbury Interferential unit

ITEM-44688 SmartPro UPS

ITEM-25872 Whatman PHA 300

£ 495.00 (ex. VAT) 1 in stock

Olympus SZ40 Stereo Zoom Microscope SZ-ST W.10X Lab

ITEM-30619

This Olympus SZ40 Stereo Zoom Microscope SZ-ST was removed from a university lab where it was surplus to requirements.

The lamp powers on via the Olympus power and is in full working order. It focuses well.

It is in reasonably good cosmetic condition with marks from use.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

£ 495.00 (ex. VAT) 1 in stock

Gallenkamp Digital Flame Analyser FGA-350-L w/ Lafert Air Compressor Pump Lab

ITEM-24780

This Gallenkamp Digital Flame Analyser FGA-350-L was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use. We were able to get it to produce a spark.

The lab confirmed that it was working prior to removal.

With it is;

1 x Lafert air compressor pump:

Model LM 63/4

The unit powers up but has not been tested further.

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 485.00 (ex. VAT) 1 in stock

KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

ITEM-38768

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 1 in stock

Robins Scientific Hydra 96 Microdispenser Lab

ITEM-35101

This Robins Scientific Hydra 96 Microdispenser was removed from a university lab where it was surplus to requirements.

The unit powers up and the up/down function has been tested. It is in good cosmetic condition with marks from use.

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.

We were unable to test the unit as it was not supplied with the PSU

Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 470.00 (ex. VAT) 1 in stock

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

ITEM-35330

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition.

The Reactivation Heater was tested to 108.8 ˚C with a digital thermometer (not included).

£ 460.00 (ex. VAT) 1 in stock

Jeol JEM-1200 EX Pump and Pressure Tank

ITEM-39684

Jeol JEM-1200 EX Pump and Pressure Tank

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in good cosmetic condition with marks from use.

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 455.00 (ex. VAT) 1 in stock

MakerBot Replicator Model Z18 3D Printer 5th Gen

ITEM-37488

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.

No filament spool is included.

Usage:

Print time: 188.12 hours
Mass extruded: 3.1 kg

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 450.00 (ex. VAT) 1 in stock

Liquid Nitrogen Tank Dewar Trolley

ITEM-46992

Dual Liquid Nitrogen Tank Trolley

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

£ 450.00 (ex. VAT) 1 in stock

MotionLink ServoStep Rackmount Motor Driver

ITEM-43085

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

MakerBot Replicator Z18 3D Printer 5th Gen

ITEM-37487

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal. No filament spool is included.

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)