Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU

This was removed from a university lab where it was surplus to requirements.

The lab it was removed from confirmed it was in working order prior to removal but were unable to supply the software.

All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included.

The system is in good cosmetic condition, but the rubber foot ends are crumbling.

There is no software included with the system.

Items included:

Main Units:

Olympus Lext OLS3100

Dimensions: 464(W)x559(D)x620(H)mm

Weight: 56.5kg

Olympus MM6-ASPS Controller

Dimensions: 381(W)x304.8(D)254(H)mm

Weight: 14.33kg

Olympus OLS3000 Power Supply

Dimensions: 355.6(W)x177.8(D)355.6(H)mm

Weight: 9kg

Accessories:

Olympus U-DICR

Olympus U-P03

Olympus U-AN360-3

GE AKTA Purifier UPC 10 FPLC System with FRAC-950 Fraction Collector

This system was removed from a university laboratory where it was surplus to requirements.

All included units power on and pair successfully, we could not test the system further at our facility.

They are all in good cosmetic condition.

Includes:

• AKTApurifier
• Box-900
• UFC-900
• P-900
• Frac-950

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab

This system was removed from a university lab where it was surplus to requirement.

Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility.

Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware.

Nucleocounter C-200

Serial No. 9000201112003520

Lenovo Thinkpad T15 laptop

Windows 10 operating system

Serial No. PF-2J1PMV

Also includes the following:

Included:

2 x Low-voltage power supplies

1 x Data lead

This Flir Systems ThermaCam SC500 194 780 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition minor with marks from use, we are unable to test it further at our facility.

Included are the following:

Flir Systems PC Card Interface

P/N: 194 240

S/N: 2030068

HiTRON 13.5 volt Power Supply

M/N: HES61-11B

S/N: 0165

Flir Systems Break Out Box

P/N: 194 257

S/N: 3300066

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

• 1 Shelf: 74 x 58 cm
• 2 Baskets: 57 x 30 x 15 cm
• Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

Hudson Solo SOL9 Liquid Handler

This item was removed from a university lab where it was surplus to requirements.

The robot is in very good used condition and has been successfully tested for communication with the included

software.

The previous client has confirmed it being in working order.

System Includes:

• 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU)
• 4 x 10cm Tall Nests
• 2 x 6cm Tall Nests
• 1 x 4.5cm Nest
• 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units:
• 1 with a TPS 620-5033 plate
• 1 with a TPS 620-5045 plate
• 2 x PSU's
• 1 x BioShake Heated Shaker Plate (marked as faulty)
• 2 x Boxes of 1000ul Pipette Tips (all sealed inside)
• 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed
• 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Lab Scale Fermenter: Bio-Age Bio-Spin Series 05A Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

• 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
• Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
• Reflector modules: DAPI, FITC, TRITC, empty

• 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
• Position 1: empty
• Position 2: 424228-9060 0.05T Neutral density filter 0.05
• Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
• Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
• Position 5: empty

• 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

• 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

• 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

• 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

• 1 x Camera adapter 60N-C 2/3" 0.5x (426112)

• 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

• 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

• Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

• 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer used for testing not included).

It is in good cosmetic condition with minor marks.

Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

Shimadzu PSSM-8 Peptide Synthesizer w/ Memory Key, System Disk & Accessories Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition internally and externally.

It powers with the arm moving in the X/Y Axis using the onboard control panel, we are unable to test it further at our facility.

Included are the following:

Shimadzu PSSM-8 Peptide Synthesizer

Model: PSSM-8

Serial#: 310059

PSSM-8 Memory Card

Part#: 292-05230

PSSM-8 System Disk

Part#: 292-05108

Shimadzu BMD-1 Memory Card Drive

Model: BMD-1

Serial#: 310059

PSSM-C8 Cleavage Purge Unit

Shimadzu Needle

Part#: C 228-20243-94

Millex-LS syringe Driven Filter Unit

Part#: SLLS 025 NS

Shimadzu PSSM-8 Instructional Manual

This Pall GeneDisc Cycler Real-Time PCR Platform for Pa was removed from a university lab where it was surplus to requirements.

The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility.

The item carried out self-checks on start-up.

Included with the item:

Delta Electronics 12-volt Screen Power Supply

This DVS Water Vapor Sorption Analyzer System was removed from a university lab where it was surplus to requirements.

The system powers on and is in good cosmetic condition. The system was tested with a digital thermometer (not included), but has not been tested further.

System includes:

CAHN DVS-1

CAHN Digital Recording Balance D-200

DVS Surface Measurement Systems

Wheaton 6-Tier Roller Apparatus Cat No 348970CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver.

It is in good cosmetic condition with minor marks

Waters 2424 ELS Detector and Additional Thar Components

This system was removed from a university laboratory where it was surplus to requirements.

All items power on and are in varying cosmetic conditions as described below, though no further testing has been conducted.

Components:

• Waters 2424 ELS Detector
• Condition: Good, with some wear and a couple of rusty spots where the Fluid Delivery Module sits (likely a common issue)
• Model: 2424
• Serial No.: E10ELS
• Waters 2998 Photodiode Array Detector
• Condition: Good, with minimal wear
• Model: 2998
• Serial No.: M08998
• Thar Automated Back Pressure Regulator - SuperPure Discovery Series
• Condition: Good, with minimal wear
• Model: ABPR-20
• Serial No.: 5631-3
• Thar Model 06298
• Condition: Good, with minimal wear
• Model: 06298
• Serial No.: 6166-5
• Thar Fraction Collection - SuperPure Discovery Series
• Condition: Good, with minimal wear and a few stains that could not be removed
• Model: N/A
• Serial No.: 5YY9-3
• Thar Fluid Delivery Module - SuperPure Discovery Series
• Condition: Fair, with some wear and rust on the right side
• Model: FDM10
• Serial No.: 5350-2
• Thar SFC Column Oven
• Condition: Good, with minimal wear
• Model: N/A
• Serial No.: SYS S.N. 6281
• Thar 840 Autosampler
• Condition: Good, with minimal wear and a few stains that could not be removed
• Model: 840
• Serial No.: 70110

Atas GL Focus Robotic Sample Processor System

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered on, we are unable to test further at our facility.

The system comprises:

1x ThermoQuest Finnigan Polaris turbo pump controller

1x GCQ Gas chromatograph

Serial#: 950208

1x GCQ Mass Spectrometer

Serial#: 200065

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

This enclosure was removed from a university where it was surplus to requirement.

This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram.

It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included.

The measurements for the assembled enclosure are as follows:

Length x 448cm

Width x 152cm

Height x 118cm

This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

Edinburgh Instruments Time-Correlated Single Photon Counting System

This system was removed from a university lab where it was surplus to requirements.

Although all units successfully powered on, we cannot test it completely at our facility.

Condition varies as stated below each item.

The system includes the following components:

Edinburgh Instruments Spectrometer System

Serial#: 178

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted:

1. Excitation Mono Successfully Initialised

2. Emission1 Mono Successfully Initialised

3. Excitation Polariser Successfully Initialised

4. Emission1 Polariser Successfully Initialised

5. Sample Holder Temperature Successfully Read

6. nF Iris did not initialise (nF Iris Cable present but unable to find port)

7. TAC Range & Scaler Successfully Initialised

All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device.

Additionally, the system includes:

Edinburgh Instruments Nanosecond Flashlamp Head

Model: nF900

Serial#: 095

Mfd: 03/2000

The item is in good cosmetic condition and pairs successfully with the Spectrometer System.

Edinburgh Instruments nF900 Controller

Model: nF900

Serial#: 092

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Edinburgh Instruments CD900 Controller

Model: CD900

Serial#: 112

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor

This was removed from a university lab where it was surplus to requirements.

The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System

This system was removed from a university lab where it was surplus to requirements.

The microscope is in working order, but we have not tested the laser due to safety restrictions at our site.

There are no objectives fitted.

Items included are:

-Zeiss LSM Control S/N- 000260

-Hal 100 Lamp

-Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07

-Zeiss HBO 100W

-Zeiss HBO 100W/2

-Zeiss Lasermodul UV

-Fujitsu Siemans mouse

-Relevant manuals and guides

-Connection cables

-Comms PCi Cards & Dongle (non USB)

Radleys 20 Litre Jacketed Glass Reactor Vessel with IKA Stirrer, Accessories on Stand

This system was removed from a university lab where it was surplus to requirement.

All components are in good cosmetic condition, although the inner glass surface is cloudy. There are no breaks or cracks in any of the glassware.

The IKA stirrer powers on and initiates paddle rotation. Adjusting the speed to its maximum setting of 10, the stirrer runs smoothly with only a little vibration.

Included;

1 x Radleys 20 litre jacketed glass reaction vessel with 4-port glass lid (Vessel 28cm diameter x 60cm height). Neck opening 22cm

1 x IKA Werke RW16 Basic B S2 stirrer Serial No. 01554824

1 x 15cm diameter paddle with 100cm shaft

1 x thermometer probe

1 x Radleys wheeled stand with vessel clamps 48 x 48 x 112cm (l x w x h) with 150cm stirrer support pole

2 x 2 meter lengths of M30 insulated hose with metal inner (20mm ID, 56mm OD)

1 x M30 splitter valve

Priorclave Compact 60 Floorstanding Autoclave PS/MID/C60

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

The previous client has notified us that it has minimal use prior to removal.

Includes:

2 x Baskets.

Bio-Rad C1000 Touch Thermal Cycler + CFX96 Real-Time System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in excellent cosmetic condition with minor marks from use.

Included with it are;

C1000 Touch Thermal Cycler Quick Guide

C1000 Touch Thermal Cycler Instruction Manual

CFX96 AND CFX384 Real-Time PCR Detection Systems Instruction manual

Mettler Toledo Garvens 2 VS Checkweigher

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Two Andor iXon Microscopy Cameras and Andor Dual Cam with Sutter Filter Wheel

This system was removed from a university laboratory where it was surplus to requirements.

The cameras fit onto the camera splitter very well, and the support legs are all adjusted to the same height to provide a stable unit.

No testing was possible beyond this setup.

All the included units are in good cosmetic condition.

The system comprises the following:

• 2 x Andor iXon+ Microscopy Cameras, Model DU-885K-C50
• Serial No. X-3064, Year 2007
• Serial No. X-4966, Year 2010
• Andor Dual Camera Splitter, possibly a TuCam (no additional data available)
• Sutter Instruments Filter Wheel, Model LB10W-3433
• 2 x Andor 7 volt power adaptors
• Serial Nos. 002125 and 000745
• 2 x Andor PC graphic cards
• Model No. CCI-24, Serial No. C-5453, Year 2010
• Model No. CCI-23, Serial No. C-4898, Year 2010

Additional items Included:

• 2 x camera data cables
• 1 x shutter wheel data cable

Wyatt Technology DynaPro DP-TH-01 Titan & DP-AMB-01 Microsampler

This system was removed from a university lab where it was surplus to requirements.

Both units are in good cosmetic condition and power up.

However, full functionality testing requires connecting to a PC with specific software, which is not included.

The previous owner has stated it was in good working order prior to removal.

Includes:

• USB cable
• DVI cable

Model Numbers:

• Titan: DP-TH-01
• Serial Number: 111-DPTH
• Laser Power (mW): 60
• Wavelength (nm): 828.98

• Microsampler: DP-AMB-01
• Serial Number: 104-DPAMB

Thermo Elemental Model Type Solaar S2 AA Series Spectrometer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Includes:

• Rubidium Data Coded Hollow Cathode Lamp (NC 9423 390 30371)

Bio-Rad C1000 Touch Thermal Cycler and CFX96 Real-Time System

This item was removed from a university where it was surplus to requirements.

The system is in excellent cosmetic condition.

The system successfully powered on, booted, and passed a self-test with no issues. The touch screen was fully functional, and a programmed cycle to 99.9˚C, 37.0˚C, and 4.0˚C, with 10-minute holds at each, was completed as expected.

Specifications:

• C1000 Touch Thermal Cycler
• Serial No.: CT045893
• Year: 2021
• CFX96 Real-Time System
• Model: CFX9X
• Serial No.: 785BR29488
• Year: 2021
• Reaction Module
• 96W Fast
• Serial No.: RN112624

Thermo Elemental Model Type Solaar S2 AA Series Spectrometer

This item was removed from a facility where it was surplus to requirement.

It is in reasonably poor cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Some plastic panels are broken and or missing.

Included;

1 x Rubidium Data Coded Hollow Cathode Lamp. NC 9423 390 30371.

Thermo Heto PowerDry LL3000 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

Digital CR Reader With Cassettes

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition.

It powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order prior to removal.

No software is included.

S/N: 3985

Multivac A300/51 Vacuum Sealer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

As it has been used in a lab setting it is only suitable for lab use again in the future. It is not to be used for commercial catering or food packing.

JEOL JSM 840A  SEM Scanning Electron Microscope System

This was removed from a university lab where it was surplus to requirements.

The lab confirmed it was in working order prior to removal, but the control panel was removed and sold separately. It has not been tested at all at our facility but it is in good cosmetic condition with marks from use.

Included are;

Main unit:

1 x JEOL JSM-840A Scanning Microscope

Model: JSM-840A

Serial#: EP130077

Item has attached:

1 x Oxford Instruments 6605

Serial#: 09091-3390-339-521

Power Supply Unit:

JEOL JSM-840A Main Power CSL

Model: JSM-840A Main Power CSL

Serial#: EP130077-40

Also included:

JEOL Pump

Model: N/A

Serial#: N/A

Good cosmetic condition.

Lx36Wx24Hx50cm

JEOL JSM-840A User Manual

JEOL JSM-840A Service Case

This contains:

JEOL Extender MP001569-01

Various washers, fixings, screws etc.

Carl Zeiss MCS 500 System & Multiplexer

These units were removed from a university lab where they were surplus to requirements.

Everything powers up and the lab confirmed it was in working order when last used.

Included are;

Carl Zeiss MCS 500 System Spektrometer BLX500-4 + MCS 522 UV-VIS

Model: MCS 500

Serial#: 028989

Carl Zeiss Multiplexer

Model: Multiplexer

Serial#: 021166

Carl Zeiss Enclosure

Model: Double Ch.Syst.

Serial#: 029050

RS-LINK 1.2

Serial#: 1806-1009

PSM-V24/FO-G/S (Qty. 2)

Perkin Elmer Model Clarus 500 Gas Chromatograph (FID Detector) Lab

This item was removed from a university lab where it was surplus t requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order when it was last in use.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020.

It is in good cosmetic condition with minor marks.

Included with it are;

Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS software

Several manuals, safety, performance and maintenance schedule, pre-installation and operation

New and used spare skimmer and sampler cones

Spare electron multiplier

new and used spare printed circuit boards

Various tubing and connectors

Packet of various Thermo O rings

Many other unidentified small parts in sealed packaging