Engineering

£ 30,000.00 (ex. VAT) 1 in stock

Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle

ITEM-31707

This Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle is being sold on behalf of a client. It is surplus to requirements.

The unit is in excellent cosmetic condition and has only seen <50h of use.

Technical information about the Knapp Open Shuttle OS100B:

Speed: Up to 1.6 m/s (safe)
Max. Acceleration: 1,0m/s²
Minimum turn radius: 360° turn at standstill
Delivery: both front and rear possible
Container dimensions: Up to 800 mm x 600 mm
Optional integrated lift (550 mm to 1,500 mm)
Maximum load: 100 kg
Battery life: Over 6 hours, continuous operation
Charging time: Approximately 60 minutes (charge ratio > 1:6)
Conveyor top edge: 500 mm to 1,000 mm
Protection class: IP20
Battery: LiFePo4 (lithium iron phosphate)
Communication method: WLAN (b/g/n standard) in 5GHz range
Dead weight: 130kg

Collection only from Hanau, Germany.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 20,000.00 (ex. VAT) 1 in stock

Battenfeld Microsystem 50 Injection Moulding Machine

ITEM-38946

Battenfeld Microsystem 50 Injection Moulding Machine

This was removed from a university workshop where it was surplus to requirements.

The unit was not tested on our site, but the lab confirmed it was in working order prior to removal.

It is in good cosmetic condition with minor marks.

£ 15,000.00 (ex. VAT) 1 in stock

International Metrology Systems MS Impact Coordinate Measuring Machine Lab

ITEM-23978

International Metrology Systems MS Impact Coordinate Measuring Machine

This was removed from a university lab where it was surplus to requirements.

We were unable to test it at our facility but the lab confirmed that it was working prior to removal.

It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.

SPARES/REPAIR ITEM

£ 12,000.00 (ex. VAT) 1 in stock

Epilog Legend 36EXT Laser Cutter w/ 2 x Laser Fume Extractors Lab Spares/Repairs

ITEM-39269

Epilog Legend 36EXT Laser With 2 x Laser Fume Extractors Lab

This was removed from a university where it was surplus to requirements.

Epilog Laser - Legend 36EXT

Serial Number: 9060-0813513624R

Manufacture Date: 2008

The machine is fully functional but requires a new laser tube. It is in good cosmetic ocdiiton with minor marks.

Bofa Laser Fume Extractor - AD350

Serial Number: AD350-02284

Identify Advantage Laser Fume Extraction - AD350

Serial Number: 11/08/AD350-197

Both fume extraction units are in good cosmetic condition, but neither has been tested at our facility.

Also included:

3 x Used Replacement Motors (Untested)

1 x Laser Diode

1 x Epilog Legend 36EXT Manual

Due to the system requiring a new laser tube we are selling this as spares/repairs.

£ 12,000.00 (ex. VAT) 1 in stock

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80

ITEM-38557

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80.

The system was removed from a University Lab as surplus to requirements.

This system powers up and is in good cosmetic condition, we are unable to test it further at our facility.

Mackey Bowley Diffusion Bonder.

Serial No. S9638/91

Chamber Dimensions: L 58cm x W 38cm x H 38cm.

Bed Dimensions: L 80cm x W50cm.

Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.

Edwards Speedivalve.

Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.

Eurotherm Controller Type 815 & 818 Installation Manual.

Stenhoj Hydraulik 60 Ton.

Type: 500414.

Serial No. 63153.

Model Year: 1991.

Cheltenham Induction Heating Ltd.

Type: TRI 12.

Serial No. TRI2017.

Instron Control Panel.

Model: 1342.

Serial No. H2003.

Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.

Display One Single Channel Vacuum Display Manual.

Edwards High Vacuum Pump.

Model: E2M 80.

Serial No. 995.

Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

£ 11,000.00 (ex. VAT) No longer available

Gerber GERBERcutter DSC 1500 Single Ply Automated Fabric Cutter

ITEM-41951

Gerber DSC 1500 Single Ply Automated Fabric Cutter

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, the previous client has stated it was in working order when last used. We were unable to test it at our facility as it has been decomissioned.

Features:

Table size: 240 x 158 x 85cm ( l x w x h)
Cutting area: 183 x 152cm
Cutting speed: 1.1 meters per second

Also includes the following:

Gerber carriage controller unit

Serial No. 2187

Year 2008

HP Elitedesk 800 GI TWR PC running Windows 7 installed with Gerber Cutworks 5.1 software

HP KB-1156 keyboard

Iiyana Prolite Monitor

HP mouse part No. 672651-001

Kramer data splitter box

Instruction Manual

Mechanical and Engineering Manual

7 x Data cables

*A compressed air system of 90 - 120psi at 14L/m is required for operation.*

£ 10,000.00 (ex. VAT) 1 in stock

Buchiglasuster 80L Mixing Vessel (Non-Jacketed Glass Vessel) 810013201

ITEM-39983

Buchiglasuster 80L Mixing Vessel (Non-Jacketed Glass Vessel) 810013201

This was removed from a university lab where it was surplus to requirements.

We are told it was purchased in 2019 and was barely used.

Project#: 810013201

Article#: 99.31532.0000

Total Capacity: 80L

Year: 2019

The item appears to be in good cosmetic condition with no missing elements. The mixer head is included. It powers up and works well.

£ 10,000.00 (ex. VAT) 1 in stock

Genuine General Electric CF6-61DA Engine ASSY:536L387G04 Serial:451517

ITEM-12357

This jet engine is being sold on behalf of a leading UK universities engineering and aerospace department.

The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft.

In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft.

Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students.

This is a genuine full size jet engine.

Its an extremely rare opportunity to acquire a unit like this.

General Electric Model: CF6-6D1A Jet Engine

Removed from retired DC10-10 Aircraft

Has flown about 40 million miles in its 20-year working life.

Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts.

There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage.

It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.

£ 9,000.00 (ex. VAT) 1 in stock

Chroma 8 Channel Battery Cell Programmable Charge / Discharge Tester 17208M Lab

ITEM-18222

This Chroma 8 Channel Battery Cell Programmable Charge/Discharge Tester Model 17208M is being sold on behalf of a client. It is surplus to requirements. It is not currently at our site, but viewings can be arranged.

The unit is in good cosmetic condition and has been stored in the original box for the last year. It was working before it was put into storage.

Some info on the unit;

Chroma’s 17208M is a standalone 8 channel version of their 17011 series high precision charge/discharge tester specifically designed for Lithium-ion batteries, electrical double layer capacitors (EDLC), and lithium-ion capacitors (LIC).

The 17208M comes as a fully integrated system which includes allowing full configuration with reporting and statistics capability.

The new Chroma 17208M-6-30 is a high accuracy (±0.02% of F.S.) programmable charge and discharge tester (6V/30A 8 channels) built with 4 current ranges. It is the best test solution for energy storage products such as battery cells, super capacitors, and lithium ion capacitors.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 8,000.00 (ex. VAT) 1 in stock

VW Golf 1.2 TSI Training Model Fully Functioning With Teaching Software

ITEM-41912

VW Golf 1.2 TSI Training Model Fully Functioning With Teaching Software from Block Automotive - Car Clip Trainer

Product No. SSC SU Nr.4364

VW Golf Mark VII with 1.2 TSI petrol engine with 5-speed gearbox

Engine No. CJZ 023428

This item was removed from a university where it was surplus to requirement.

The vehicle is in excellent condition, with all body panels remaining undamaged.

The previous owner stated that this VW Golf Training Module is in complete working order and includes all software and documentation. It was recently fitted with a new battery, so no further investment is required. It has also been tested at our facility and found no faults or errors.

It was originally purchased for £22,800 in 2016 from Block Automotive Ltd.

Due to the nature of this item, it would require collection from our Scotland branch.

Also Included:

1 x Servicefactory Automotive Funktionsmodell SSC SU 4364 original software DVD

1 x Copy of software DVD

1 x Circuit diagrams with error codes folder for SSC SU Nr. 4364

1 x Circuit diagrams with error codes folder in German Language

1 x Data cable between the diagnostic box and PC

£ 8,000.00 (ex. VAT) 1 in stock

HPC Laser Model: RC2412 Laserscript Table CNC Router Lab

ITEM-38191

HPC Laser Model: RC2412 Laserscript Table Router Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

This item is currently stored in the client's workshop in Salford, UK and is available for collection. We can also look into delivery options for an additional fee.

This item also includes:

1 x Control Panel.

1 x MPC6620 controller.

1 x MPC6620 User Manual. (V1.0) July 2013.

Item Dimensions:

L 300 cm x W 170 cm x H 137 cm.

Weight: 356 kg

£ 7,970.00 (ex. VAT) 1 in stock

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400

ITEM-37041

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been connected to the pump. It is in good working order.

It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this.

Model Type - 95.C/800.400

SN - 495.MSC.1956

Metaserv Spindle Speed 3600 rpm

Disc size - 250 x 1.5 x 32mm

Disc Size: 250mm

Arbor Size: 32mm

Wheel RPM: 2830 RPM

Vice cutting capacity: 80mm - 75mm diameter

Safety features: Emergency stop, safety switch, electronic break

Coolant connection size: 12.5mm

Drain size: 32MM ID 34MM OD

Coolant tank size: 23 Litre

Power: 3 PHASE - No neutral

Dimensions: : 800 x 550 x 450 mm

Tank Container dimensions - L50 W36 H29cm

The lid with the pump doesn't fit the tank.

£ 6,310.00 (ex. VAT) 1 in stock

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A Lab

ITEM-25567

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A

These units were removed from a university lab where they were surplus to requirements.

Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads.

They are in good cosmetic condition with minor marks from use.

1x Anritsu Error Detector MP1764A

Model. M06340

1x Anritsu Pulse Pattern Generator MP1763B

Model. M06940

£ 6,000.00 (ex. VAT) 1 in stock

1x Dyno Mill Grinder KDL A And 1x Tricool Chiller MINAC 005LTS

ITEM-41275

1x Dyno Mill Grinder KDL A

1x Tricool chiller MINAC 005LTS

These items were removed from a university lab where they were surplus to requirements.

Both items are in good cosmetic condition and power on, we are unable to test them further at our facility.

Information from the client states both units are in working order.

£ 4,375.00 (ex. VAT) 1 in stock

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller Lab

ITEM-35544

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller

This was removed from a university lab where it was surplus to requirements.

Everything powers up but has not been tested further.

The PC contains quite a lot of software.

The programs that are relevant to the system are:

MicroWriter ML Version 2.11.11.0.

Thorlabs apt configuration utility v2.2.5389 14611.

MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system

The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.

SPARES/REPAIR ITEM

£ 4,000.00 (ex. VAT) 1 in stock

Taylor Hobson Form Talysurf -120L Surface Measuring Machine Lab Spares/Repairs

ITEM-40012

Taylor Hobson Form Talysurf -120L Surface Measuring Machine

This system was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

This item has not been powered on or tested further, therefore it is listed as Spares/Repairs.

The lab informed us that it was faulty prior to removal.

Includes the following:

1x Taylor Hobson CRT Monitor

1x Taylor Hobson HP Desktop PC (Hardive removed)

1x Taylor Hobson Motor Controller Driver

1x Form Talysurf Series Power Supply

1x Form Talysurf Series Printout unit

1x Taylor Hobson Pneumo Multitasking Motor Controller.

4x Booklets/User Guides

1x Dallas Semiconductor Dongle Key

£ 4,000.00 (ex. VAT) 1 in stock

Sedgwick TA400 Table Saw With P&J Extractor Unit Lab

ITEM-45148

Sedgwick TA400 Table Saw with P&J Extractor Unit

This system was removed from a university lab where it was surplus to requirements.

The units are in good used cosmetic condition, showing typical signs of use. Both units are three-phase and run as expected.

The system includes:

1 x Sedgwick TA400 Table Saw
The saw operates smoothly and quietly.
Both emergency stop buttons function, with a brief deceleration before fully stopping.
Specs:
400 mm saw blade
Tabletop dimensions: 900 mm W x 1120 mm L (without extension), 1720 mm W x 1120 mm L (with extension)

1 x P&J PJDMV2.5-WT-1.5-3I Extractor Unit
The extractor runs efficiently alongside the saw, providing reliable dust extraction.

Model: TA400

£ 3,925.00 (ex. VAT) 1 in stock

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

ITEM-36247

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

£ 3,500.00 (ex. VAT) 1 in stock

Atlas Copco GA18 Compressor Lab

ITEM-34938

Atlas Copco GA18 Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab said it was functional prior to removal

NEW ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Zeta Programable Guillotine Cutter GCI-800 Lab

ITEM-34773

Zeta Programable Guillotine Cutter GCI-800

This item was removed from a university where it was surplus to requirement.

It is brand new in its original packaging.

The Item powers on and performs as intended.

All items included:

1x Zeta Programable Guillotine Cutter GCI-800

S/N: GC1800-190601

1x Set of Allen keys.

1x Philips screwdriver

1x Lubricating oil.

1x User manual.

£ 3,500.00 (ex. VAT) 1 in stock

Buehler Delta Abrasimet Abrasive Cutter Lab Model No: 10-2155-400

ITEM-34740

Buehler Delta Abrasimet Abrasive Cutter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The workshop has fitted a plug for testing, it will be removed before the sale and will need one fitting or hard wiring on arrival.

Clamp dimensions: 8cm x 4cm.

Disc dimensions: 9.5in/23.5cm.

Disc expiry date: 05/2019.

£ 3,000.00 (ex. VAT) 1 in stock

Job Lot Of Swagelok Pressure Gauges + Compression Fittings

ITEM-39227

Job Lot Of Swagelok Pressure Gauges + Compression Fittings

These were removed from a university lab where they were surplus to requirements.

The parts are as follows:

PART NUMBER	DESCRIPTION	CONDITION	QUANTITY
PGI-50m-PG25-LASX-ABE	Pressure Gauge, Bottom entry, 0-25 Bar - Swagelok	BN	18
Valve	1/4" Ball Valve - Boss/Waverley & Others	Used	16
3/8" & 3/16" nuts, tees , fittings	Swagelok	Assorted	Assortment
~60mm Panel mount, bottom entry gauge		BNIB	5
PGU-50-PC200-L-4FSF	Gauge, bottom entry, UHPurity - Swagelok	BN	6
PGU-50-PC200-C-4FSF	Rear entry	BNB	5
Pressure gauge	Oil filled, rear entry, 0-11 Bar	New	4
Pressure gauge	Bottom entry, 0-11 Bar	New	6
Union elbow	3/8" Elbows		6
Union cross	3/8" Crosses		5
Straight union	3/8" Union		14
SS-4WVCR-6-400		BNIB	6
SS-4WVCR-CP		BNIB	6
Union	3/8" Elbow	Used	5
SS-810-1-8W	1/2" tube x 1/2" male weld	BNIB	2
SS-600-7-6-BMP	3/8" x 1/2"F		2
SS-PB4-TA4	Box of 10 quick connects	BNIB	1
SS-PB8-TA8	Box of 10 quick connects	BNIB	4
SS-P	Box of 10 quick connects	BNIB	7
SS-QC4-S-400	Box of 10 quick connects	BNIB	3
SS-QC4-B-4PM	Box of 10 quick connects	BNIB	1
Assorted quick connects	Assorted quick connects	BN	~50

£ 3,000.00 (ex. VAT) 1 in stock

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure

ITEM-35686

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The lab confirmed it was working prior to removal.

£ 2,850.00 (ex. VAT) 1 in stock

Jesco Machinery XYZ 1340 Lathe Lab

ITEM-37214

*this item has now passed PAT - requires testing(powering on)*

Jesco Machinery XYZ 1340 Lathe

This item was removed from a university where it was surplus to requirement.

This lathe was removed from a working environment and is reported to have been functional prior to removal.

(skates not included).

Model: XYZ1340

Serial No.: SH9318

£ 2,810.00 (ex. VAT) 1 in stock

Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve

ITEM-38693

Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve

This was removed from a university lab where it was surplus to requirements.

It is in a good clean used condition.

Item is supplied with:

1 x Armaturen ARI DP32 Valve.

1 x Lightnin Model: ECI-M51- 150. Serial No. 2747863.

1 x Pump TEC Electric Motor Model: MS2100l-6. Serial No. 1107-004 1949.

1 x Alfa Laval Model: Unique SSV PN10. Serial No. 21127802513. Year 2011.

1 x Flux F424 Seal-less Barrel Pump.

Various ARI Valves & assorted Pipework.

It has not been tested in any way by us.

Serial No: LUB13074-7.

Build date: 2012.

Volume: 360 Ltr.

Construction Category: G.E.P. Tested March 2012.

Material: 304 Stainless steel.

£ 2,500.00 (ex. VAT) 1 in stock

Colchester Master 2500 Lathe

ITEM-37215

Colchester Master 2500 Lathe

This item was removed from a university lab where it was surplus to requirements.

The lathe is in typical condition for this type of equipment, with visible wear from previous use.

The previous client had stated it was in working order prior to removal.

Model: Master 2500

£ 2,500.00 (ex. VAT) 1 in stock

Sheen Wet Abrasion Scrub Tester Model - 903 Lab

ITEM-44628

Sheen Wet Abrasion Scrub Tester Model - 903 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,470.00 (ex. VAT) 1 in stock

4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans

ITEM-37658

4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans

These were removed from a university lab where they were surplus to requirements.

All 4 Units power on and are powerful they are in Good Condition with Minimal Wear and just a few minor scratches here and there

Model - EWRG 210 LB/4

£ 2,420.00 (ex. VAT) 1 in stock

Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules Lab

ITEM-28395

This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.

£ 2,020.00 (ex. VAT) 1 in stock

Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A Lab

ITEM-19267

This Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonably good cosmetic condition but has some marks from use.

£ 2,000.00 (ex. VAT) 1 in stock

Betol 2520J Single-Screw Extruder

ITEM-45427

Betol 2520J Extruder

This item was removed from a university lab where they were surplus to requirements.

It is in good used cosmetic condition and powers on.

The previous client has stated it was last used around 6 years ago and reportedly worked fine at the time.

Please note: this item does not contain a Drill-Bit.

£ 2,000.00 (ex. VAT) 1 in stock

Spinnaker 1161 Laser with Water Cooling System

ITEM-41129

Spectra-physics cooling pump

Model: 1461-2

S/N: 042

Powers on, unable to test further.

Spectra Physics Spinnaker 1261:

Model:1261

S/N: 0019

The necessary cable is missing, so it couldn't be turned on.

Spectra Physics Spinnaker 1161 Laser:

Model: 1161-01

S/N: 1020

Manufactured:1992

The necessary cable is missing, so it couldn't be turned on.

£ 1,975.00 (ex. VAT) 1 in stock

MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand

ITEM-39849

MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonable cosmetic condition for this type of equipment, though it has been well used.

It has a 16amp 5 pin 3phase plug fitted.

£ 1,545.00 (ex. VAT) 1 in stock

Sonimat Ultrasons GP20 with Monitor/Terminal Ultrasoic Welding Controller Lab

ITEM-28173

This Sonimat Ultrasons GP20 with Monitor/Terminal was removed from a university lab where it was surplus to requirements.

The units power up and the monitor/PC unit is working but an alarm sounds.

There don't appear to be any programmes/apps loaded onto the system.

£ 1,500.00 (ex. VAT) 1 in stock

29x ADInstruments PowerLab/200 with Software Lab

ITEM-41557

29x ADInstruments PowerLab/200 with Software Lab

All items have been removed from a university where it was surplus to requirement.

They are all in good cosmetic condition and power on, we are unable to test them further at our facility.

£ 1,500.00 (ex. VAT) 1 in stock

Pakawaste VB56 Vertical Cardboard Baler Machine

ITEM-41140

Pakawaste VB56 Vertical Cardboard Baler Machine

This unit was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but unable to test due to the required Key not being included.

The client stated the following: "No keys were supplied with them, they were working up until they were switched off and have not been powered on since. Stopped using them as health and safety told staff to no longer use"

£ 1,500.00 (ex. VAT) 1 in stock

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel Lab

ITEM-23928

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel

This was removed from a university engineering department where it was surplus to requirements.

The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling.

It is in five sections:

Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor.

Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters.

Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm.

Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal.

Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

£ 1,500.00 (ex. VAT) 1 in stock

Unimatic Educam 44 Computer Aided Router & Lathe

ITEM-46054

Unimatic Educam 44 Computer Aided Router & Lathe

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition.

However, we are unable to conduct further testing at our facility due to the absence of the necessary computer system and software.

The previous client stated it was working when last used, several years ago.

SPARES/REPAIR ITEM

£ 1,350.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

£ 1,350.00 (ex. VAT) 1 in stock

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab

ITEM-41859

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Included are the following:

1 x GeoTech G100 Co2 Analyser

S/N - IN17195

1 x HygroClip 2 Advanced series

S/N - 20684187

1 x GeoTech Cary Case

1 x Sample Tube Kit

£ 1,300.00 (ex. VAT) 1 in stock

Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder

ITEM-26280

This Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder was removed from a university engineering lab where it was surplus to requirements.

We haven't tested it at our facility further than powering it up but the lab said it was fully working prior to removal. It is a complete system.

Actual unit dimensions - D58 W80 H143.5cm (comes on a trolley for mobility)

27 x 58cm Platform to hold gas bottles.

it is in reasonably good cosmetic condition with marks from use.

£ 1,250.00 (ex. VAT) 1 in stock

B.O.B 610 RBG Stevenson Space Heater Lab

ITEM-41644

B.O.B 610 RBG Stevenson Space Heater Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 1,250.00 (ex. VAT) 1 in stock

Jinan King Rabbit CNC Machine System w/ PSU And Chiller

ITEM-36023

Jinan King Rabbit CNC Machine System PSU And Chiller

This was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further.

Includes:

-HPC PSU

-Motion controller

S/N- 13920124

-S&A Industrial Chiller (no cap)

Model number-CW3000AG

Max RPM- 24000

Model number- RC 4040

£ 1,235.00 (ex. VAT) 1 in stock

Struers LaboPol-1 Polishing Machine Lab

ITEM-34939

This Struers LaboPol-1 Polishing Machine was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonable cosmetic condition but is well used.

£ 1,200.00 (ex. VAT) No longer available

Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs

ITEM-25140

Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs

This was removed from a university lab where it was surplus to requirements.

The unit did not power up in testing. It is sold for spares/repairs.

Included are the following;

Accessories.

1x lockable tool chest with misc bit items inside.

1x user manual

1x Materials testing quick guide (laminated)

1x home made timer box (plug removed)

1x Transducer unit

£ 1,150.00 (ex. VAT) 1 in stock

Jun-Air Model 6/6-4 Quiet Running Compressor Lab

ITEM-41411

Jun-Air Model 6/6-4 Quiet Running Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

We are unable to test it further at our facility.

£ 1,080.00 (ex. VAT) 1 in stock

Mettler Toledo DA-100M Density Meter Lab

ITEM-35284

This Mettler Toledo DA-100M Density Meter was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonable cosmetic condition but has marks and rusting from use.

£ 1,080.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

£ 1,045.00 (ex. VAT) 1 in stock

Thermo IEC Scientific French Press Model FA-078AE Lab

ITEM-20165

This Thermo IEC Scientific French Press Model FA-078AE was removed from a university lab where it was surplus to requirements.

The unit powers up but it has not been tested further. The ratio selector control knob is missing.

It is in reasonably good cosmetic condition but has some surface rust and some marks from use.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

Engineering

Filters