Centrifuges

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge w/ A-4-62 Rotor Lab

ITEM-49742

Eppendorf 5804 R Centrifuge w/ A-4-62 Rotor Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing the following error was present; Error 17, a PCB fault.

Which prevented any further testing.

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hermle Z 300 K Centrifuge Lab

ITEM-47684

Hermle Z 300 K Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and shows minimal wear.

However, during testing it failed to reach the set temperature, stabilizing at 25°C, and did not achieve the rotor’s maximum speed of 5000 RPM, reaching only 4000 RPM.

Therefore, it is listed as spares/repair.

Model: Z 300 K

Serial No.: 55060105

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab

ITEM-47421

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge displays an E33 error, indicating a fault with the main board. The working condition of the remaining parts is unknown:

2 x Lid locks (at least one reported to have an issue)
1 x Motor
1 x Compressor
1 x Display board
1 x Temperature sensor

Due to the issues stated above, this centrifuge is listed as Spares/Repair.

Please note: There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab

ITEM-47420

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The casing is in good used cosmetic condition. However, following internal components have been removed:

2 x lid locks/mechanisms
1 x motor

The main board is present but faulty and displays an E33 error on startup. The condition of other internal components—including the compressor, display, and temperature sensor is unknown and has not been tested.

Therefore, it is listed as Spares/Repair.

Please note: There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-3B Plus Floor Standing Centrifuge Lab

ITEM-46525

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but has not been tested on site due to the service report attached stating;

Rotor lock: Seized, cannot remove rotor

No reported problems Service and check as above Unit is old

Note 6: door seal has shrunk and will not go back into place

Note 9: chamber is corroded due to substance.

Note 10: gas struts have failed, lid is heavy and can fall.

Note 12: drive shaft housing corroded.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L5-50B Ultracentrifuge Lab

ITEM-51430

Beckman L5-50B Ultracentrifuge Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, it displays a balance error which prevents any further testing from being carried out.

It is therefore being sold for Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific SORVALL RC 6+ Centrifuge

ITEM-49704

Thermo Scientific SORVALL RC 6+ Centrifuge

This item was removed from a facility where it was surplus to requirement.

The unit powers on and was able to cool down to 4°C during testing; however, a noticeable electrical burning smell developed during operation.

The start capacitor became excessively warm and there appears to be an issue relating to the cooling system circuitry, possibly involving a faulty relay or capacitor control fault.

Due to these faults, the unit is being sold for spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-6 Plus Floor Standing Centrifuge Lab

ITEM-52688

Sorvall RC-6 Plus Floor Standing Centrifuge

This item was removed from a facility where it was surplus to requirement.

The unit powers on but displays alarm “E38”. The onboard information menu advises that alarms E10–E95 are intended for service personnel, therefore no further fault information could be obtained.

Please note that the centrifuge arrived with several internal connections unplugged.

Due to this fault, the unit could not be fully tested and is therefore being sold for spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima TL Ultracentrifuge w/ Beckman TLA 100.4 Rotor

ITEM-42968

Beckman Optima TL Ultracentrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition with minimal wear. However, the unit is non-operational: it does not run programs or operate normally. The door does not open unless the unit is manually stripped down and the door lock pin is pressed.

Additionally, the vacuum chamber does not hold pressure. Error messages displayed include CPU, VAC, and SPD.

Therefore, it is listed as Spares/Repair.

Includes:

Rotor: Beckman TLA 100.4
Maximum Speed: 100,000 RPM
Serial No.: 95U1272

Model: TL

Serial No.: CTL95E13

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Allegra X-22R Benchtop Centrifuge Lab

ITEM-47198

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

£ 400.00 (ex. VAT) 1 in stock

ALC PK121 Multispeed Benchtop Centrifuge w/ ALC T515 Swinging Bucket Rotor Lab

ITEM-47205

ALC PK121 Multispeed Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with some rust spots visible inside and is in good working order.

Includes;

ALC T515 Swinging Bucket Rotor w/ 4 x Buckets.

£ 400.00 (ex. VAT) 1 in stock

Hettich Universal 320 Benchtop Centrifuge w/ 1617 Rotor 5000RPM

ITEM-54248

Hettich Universal 320 Benchtop Centrifuge w/ 1617 Rotor 5000RPM

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 400.00 (ex. VAT) 1 in stock

Hettich Zentrifugen Universal 320 Benchtop Centrifuge w/ 1624 Rotor 4000RPM

ITEM-54704

Hettich Zentrifugen Universal 320 Benchtop Centrifuge w/ 1624 Rotor 4000RPM

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 390.00 (ex. VAT) 1 in stock

ALC PK121 Multispeed Centrifuge w/ T515 Rotor 4300RPM Lab

ITEM-55554

ALC PK121 Multispeed Centrifuge w/ T515 Rotor 4300RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

ALC T515 Rotor 4300RPM
4 x ALC P509 Buckets.

£ 380.00 (ex. VAT) 1 in stock

ALC PK121 Multispeed Centrifuge w/ T515 Rotor 4300RPM Lab

ITEM-55555

ALC PK121 Multispeed Centrifuge w/ T515 Rotor 4300RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

ALC T515 Rotor 4300RPM
4 x ALC P509 Buckets.

Last Service: 13/07/2023

£ 350.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0R Refrigerated Centrifuge With 2800RPM Rotor

ITEM-39094

Heraeus Megafuge 1.0R Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well.

It is in good cosmetic condition with marks from use.

Rotor max RPM- 2800

The rotor holds 24 x 15ml tubes

£ 300.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0 Centrifuge w/ BS4402/A Rotor 6000RPM

ITEM-51623

Heraeus Megafuge 1.0 Centrifuge with BS4402/A Rotor 6000RPM

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The cooling fans were noticeably noisy during testing.

Includes:

BS4402/A Rotor

£ 300.00 (ex. VAT) 1 in stock

SciQuip Sigma 2-5 Benchtop Centrifuge Lab

ITEM-52471

SciQuip Sigma 2-5 Benchtop Centrifuge Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: There is no rotor included.

£ 250.00 (ex. VAT) 1 in stock

MSE Mistral 1000 Benchtop Centrifuge w/ Swing-Out Rotor Lab

ITEM-52625

MSE Mistral 1000 Benchtop Centrifuge w/ Swing-Out Rotor Lab

This item was removed from a facility where it was surplus to requirement.

The unit is in good working order.

Please note: The rear corners of the lid are broken. This does not affect the lid hinges or normal opening and closing operation.

£ 250.00 (ex. VAT) 1 in stock

Drucker Horizon Model 755VES Benchtop Centrifuge w/ Rotor 4000RPM Lab

ITEM-54327

Horizon Model 755VES Benchtop Centrifuge w/ Rotor 4000RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

RECERTIFIED ITEM

£ 250.00 (ex. VAT) 1 in stock

Fisher Scientific Accuspin 400 w/ 5197 Swing-Out Rotor 400rpm

ITEM-52434

Fisher Scientific Accuspin 400 w/ 5197 Rotor 400rpm

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 100.00 (ex. VAT) 1 in stock

Centurion Cell-Prep 4050 Benchtop Centrifuge Lab

ITEM-32099

Centurion Scientific Centrifuge 4050 Series Cell-Prep

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in reasonable cosmetic condition, with visible signs of wear and some rust.

It powers on without issue and has been tested to operate at 50 RPM, 100 RPM, and its top speed of 200 RPM.

Included Components:

12-bay centrifuge rotor
1x balance weight

Specifications.

Model: 4050 Series Cell-Prep
Serial No.: 98042157

£ POA 1 in stock

Kendro Laboratory Products D-37520 Benchtop Centrifuge

ITEM-54840