Incubators and Growth Chambers
Items 21 to 40 of 186
£ 2,655.00 (ex. VAT) 1 in stock
Sanyo Type MCO-20AIC CO2 Laboratory Incubator Double-Stack lab
ITEM-30525
This was removed from a university lab where it was surplus to requirements.
Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.
The incubators are in good cosmetic condition with only minor marks from use.
Top:-
Model - MCO-20AIC
SN - 01212218
External Dimensions - D72 W77 H102cm
Internal Dimensions - D51 W61 H66cm
4 Shelves - 45 x 58cm
Bottom:-
Model - MCO-20AIC
SN - 01212221
External Dimensions - D72 W77 H102cm
Internal Dimensions - D51 W61 H66cm
4 Shelves - 45 x 58cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,500.00 (ex. VAT) 1 in stock
New Brunswick Galaxy 48R CO2 Incubator Lab
ITEM-35611
This New Brunswick Galaxy 48R CO2 Incubator was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. There is a report available on request.
It is in very good cosmetic condition with minor marks.
£ 2,500.00 (ex. VAT) 1 in stock
Binder KBF 240 Climate Chamber Lab
ITEM-36880
Binder KBF 240 Climate Chamber
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been temp tested. It is in good working order (Thermometer not included).
It is in good cosmetic condition with minor marks.
£ 2,370.00 (ex. VAT) 1 in stock
Medline Scientific Jeio Tech Lab Companion Incubator Shaker IST-3075R
ITEM-31890
This Medline Scientific Jeio Tech Lab Companion Incubator Shaker IST-3075R was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good working order. The shaker runs up to 500rpm and the incubation works.
It is in good cosmetic condition with minor marks from use.
Internal dimensions - L41 W40 H32
Shaker Platform - 35 x 35cm
2 x 1000ml Flask Clamps
Tube Stand holds 10 x 50ml Tubes
£ 2,215.00 (ex. VAT) 1 in stock
Thermo Scientific HERAcell 240i CO2 Incubator Lab
ITEM-36125
This Thermo Scientific HERAcell 240i CO2 Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a temperature and CO2 sensor (not included). It may require calibration to your equipment upon installation.
It is in full working order.
It is in good cosmetic condition with minor marks.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,010.00 (ex. VAT) 1 in stock
Thermo Scientific MAXQ 4000 Incubator Shaker Lab SHKE4000-1CE
ITEM-30192
This Thermo Scientific MAXQ 4000 Incubator Shaker was removed from a university lab where it was surplus to requirements.
The unit powers up and has been inspected and recertified by a service engineer. It has had the following new parts fitted. It is in good working order.
2 x Gas struts.
3 x Shaker plate bearings.
1 x Drive belt.
It has also had a replacement shaker plate drive section fitted.
It is in excellent cosmetic condition with only minor marks from use.
£ 1,980.00 (ex. VAT) 1 in stock
New Brunswick Scientific Innova 4200 Shaker Incubator Lab
ITEM-35907
New Brunswick Scientific Innova 4200 Shaker Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digitial thermometer not included).
It is in good cosmetic condition with marks from use.
1 x Shelf included 50 x 50cm
Max 450rpm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,920.00 (ex. VAT) 1 in stock
Thermo Scientific HERAcell 150i C02 Laboratory Incubator Lab
ITEM-19374
This Thermo Scientific HERAcell 150i C02 Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It has been calibrated to 5% CO2 at our site, but will likely need calibrating to your lab environment upon installation.
It is in reasonably good cosmetic condition but has some dark scuffs and marks.
Unit dimensions - L80 x W67 x H86cm
Internal - L51 x W47 x H60cm
3 Shelves - 47 x 43cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,860.00 (ex. VAT) 1 in stock
Binder Model CB 150 CO2 Laboratory Incubator
ITEM-36088
This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The system has been professionally serviced and is in full working order. A report is available on request.
It is in good cosmetic condition with minor marks.
It is supplied with a trolley
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,850.00 (ex. VAT) 1 in stock
Binder CO2 Laboratory Incubator Model CB 150 Lab
ITEM-36091
This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The system has been professionally serviced and is in full working order. A report is available on request.
It is in good cosmetic condition with minor marks.
It is supplied with a trolley
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,800.00 (ex. VAT) 1 in stock
Binder CO2 Incubator CB 150 Lab
ITEM-39056
Binder CO2 Incubator CB 150
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It has been fully tested but may need to be calibrated upon installation. (Thermometer & CO2 probe not included).
It is in good cosmetic condition with minor marks.
£ 1,775.00 (ex. VAT) 1 in stock
Sanyo MCO-801C CO2 Incubator Lab
ITEM-35818
Sanyo MCO-801C CO2 Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the CO2 and temperature settings are working well, but we had a bit of an issue calibrating the temperature exactly to our equipment. It is in otherwise good working order.
It is in good cosmetic condition with marks from use.
Five shelves 65cm x 80cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,750.00 (ex. VAT) 1 in stock
Panasonic MCO-19MUVH-PE O2/CO2 Incubator Lab
ITEM-31729
Panasonic MCO-19MUVH-PE O2/CO2 Incubator
This was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order.
It is in good cosmetic condition with minor marks.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,750.00 (ex. VAT) 1 in stock
Binder CB 150 CO2 Laboratory Incubator Lab
ITEM-35877
This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The system has been professionally serviced and is in full working order. A report is available on request.
It is in good cosmetic condition with minor marks.
£ 1,725.00 (ex. VAT) 1 in stock
Binder CO2 Incubator Series CB CB 150 Lab
ITEM-29765
This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable.
It was tested with a temperature and CO2 sensor (not included).
Internal dimensions are: L44cm x W49cm x H60cm.
£ 1,710.00 (ex. VAT) 1 in stock
Binder Model CB 150 CO2 Laboratory Incubator Lab
ITEM-24001
This Binder Model CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order, though it will need calibrating upon installation. It was tested with a CO2 and Temp probe (Not included).
It is in good cosmetic condition with marks from use.
Internal Dimensions are H 59.5cm x W 50cm x D 45cm
£ 1,680.00 (ex. VAT) 1 in stock
New Brunswick Innova 4300 Incubator Shaker Mfg no. M1193-0100 Lab
ITEM-31245
This New Brunswick Innova 4300 Incubator Shaker was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). The shaking plate has also been tested. The system is in full working order.
It is in reasonable cosmetic condition with marks from use.
Internal dimensions - L88 W56 D34cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,605.00 (ex. VAT) 1 in stock
Thermo Scientific Heracell 150i CO2 Incubator Lab
ITEM-31317
This was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order. The report is available on request.
It is in good cosmetic condition with minor marks from use.
£ 1,560.00 (ex. VAT) 1 in stock
Thermo Scientific HERAcell 150i CO2 Incubator - Copper Interior Lab
ITEM-30443
This Thermo Scientific HERAcell 150i CO2 Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order but may require calibration upon delivery.
It is in reasonably good cosmetic condition with marks and stains from use. The unit is fitted with the optional copper internal walls and shelves, hence how it looks. It is a little tarnished.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,510.00 (ex. VAT) 1 in stock
Thermo Scientific Heracell 150i CO2 Laboratory Incubator Lab
ITEM-31338
This was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced. It is in good working order but will require calibration once it reaches its new location. The full report is available on request.
It is in excellent cosmetic condition with minor marks from use.
Internal dimensions - L51 W47 H61cm
3 Shelves - 47 42cm
Items 21 to 40 of 186