Incubators and Growth Chambers

£ 1,500.00 (ex. VAT) 1 in stock

Scientific Industries Incubator-Genie SI-1403 Shaking Incubator Lab

ITEM-35989

Scientific Industries Incubator-Genie SI-1403 Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but may need slight calibration. (Digital thermometer used for testing, not included).

It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 1,500.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 Refrigerated Incubator Shaker SHKE6000-8CE Faulty

ITEM-19907

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university lab where it was surplus to requirements.

The unit has a power board fault.

It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly.

Internal dimensions - D52 x W55 x H67cm

1 Shelf - 52 x 54cm

Shaker Plate - 45 x 45cm

It is sold for spares or repairs due to the electrical fault.

£ 1,500.00 (ex. VAT) 1 in stock

New Brunswick innova 4230 Refrigerated Incubator Shaker Lab

ITEM-39715

New Brunswick innova 4230 Refrigerated Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Thermometer used for testing not included).

It is in reasonably good cosmetic condition but has some marks from use.

RECERTIFIED ITEM

£ 1,500.00 (ex. VAT) 1 in stock

Heraeus HERAcell 150 CO2 Laboratory Incubator Lab

ITEM-35703

This Heraeus HERAcell 150 CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirement.

The unit has been professionally serviced and is in good working order. A report is available on request.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 1,500.00 (ex. VAT) 1 in stock

Kendro HERAcell 240 CO2 Incubator Lab

ITEM-31145

This Kendro HERAcell 240 CO2 Incubator was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - D56.5 W60 H68cm

6 Doors with 6 Shelves - 50 x 26cm

£ POA 1 in stock

Thermo Scientific Heraeus Cytoperm 2 CO2 Incubator Lab

ITEM-35704

This item is new in stock. Please enquire for further details.

£ 1,375.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV) Lab

ITEM-32019

This Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV)was removed from a university lab where it was surplus to requirements.

Both units have been tested with and CO2 and temperature sensor and are in good working order. They will require calibration upon installation.

They are in good cosmetic condition with minor marks from use.

Top:-

Model - MCO-17AI

SN - 60301691

External dimensions - L70 W63 H90cm

Internal dimensions - L50 W48 H66cm

3 Shelves - 45 x 45cm

Net Weight - 91kg

Bottom:-

Model - MCO-18AIC (UV)

SN - 31112791

External dimensions - L71 W64 H91cm

Internal dimensions - L51 W48 H66cm

3 Shelves - 45 x 45cm

Net Weight - 93kg

£ 1,375.00 (ex. VAT) 1 in stock

New Brunswick Scientific Classic C24 Incubator Shaker Lab

ITEM-31977

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm.

It is in reasonable cosmetic condition but has some fairly heavy usage marks.

Internal dimensions - L54 W52 H36cm

Shaker Platform - 45.5 x 45.5cm

Tube stand inside holds 20 x 50ml tubes

RECERTIFIED ITEM

£ 1,370.00 (ex. VAT) 1 in stock

Heraeus HeraCell Laboratory CO2 Incubator Lab

ITEM-16546

This Heraeus HeraCell Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in very good condition overall with plenty of sticker marks on the exterior, but the inside is extremely clean. It comes with 3 shelves and a trolley.

The unit has been tested with a Temperature and CO2 Sensor (not included) and is in good working order. The unit has been professionally serviced.

£ 1,370.00 (ex. VAT) 1 in stock

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator Lab

ITEM-36470

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. (Thermometer not included).

It is in good cosmetic condition with minor marks.

£ 1,350.00 (ex. VAT) 1 in stock

Jouan Water Jacketed Incubator Model IG150 Lab

ITEM-29770

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.

It is in good cosmetic condition with minor marks.

Internal dimensions are: L41cm x W41cm x H60cm.

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Hera Cell 150 Co2 Incubator Lab

ITEM-29836

Thermo Electron Corporation Hera Cell 150 Co2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a temperature and CO2 probe (not included). It is in full working order.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 1,340.00 (ex. VAT) 1 in stock

New Brunswick Galaxy 170 S CO2 Laboratory Incubator Model - CO170S-230-1000 Lab

ITEM-19862

This New Brunswick Galaxy 170 S CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order.

Internal dimensions - D45 W53 H69cm

4 Shelves 43 x 52cm

1 Tray - 35 x 33 x 4cm

It is in reasonably good cosmetic condition with some marks from use.

£ 1,320.00 (ex. VAT) 1 in stock

Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab

ITEM-17203

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.

It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.

Internal dimensions 48x58x48cm LWH

£ 1,300.00 (ex. VAT) 1 in stock

LMS Cooling Incubator 280 Lab

ITEM-36523

LMS Cooling Incubator 280

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order (the thermometer used for testing and not included).

It is in good cosmetic condition with minor marks.

£ 1,270.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator Double Stack MCO-17AI Lab

ITEM-32020

This Sanyo CO2 Laboratory Incubator Double Stack MCO-17AI was removed from a university lab where it was surplus to requirements.

The units were both tested with a CO2 and Temperature sensor. They are in good working order but will need to be calibrated on installation.

They are in good cosmetic condition with minor marks from use.

Top:-

Model - MCO-17AI

SN - 60402577

External dimensions - L70 W63 H90cm

Internal dimensions - L50 W48 H66cm

4 Shelves - 45 x 45cm

Net Weight - 91kg

Bottom:-

Model - MCO-17AI

SN - 60804910

External dimensions - L70 W63 H90cm

Internal dimensions - L50 W48 H66cm

4 Shelves - 45 x 45cm

Net Weight - 91kg

£ 1,255.00 (ex. VAT) 1 in stock

Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE

ITEM-28143

This Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE was removed from a university lab where it was surplus to requirements.

The unit powers up and is working. It has been assessed by an engineer who replaced the lid struts and fitted a new drive belt.

The only issue is the main power button on the front of the unit doesn't appear to work. This does not affect the operation of the unit at all. It just needs to be switched on and off at the main supply.

The incubator function was tested with a digital thermometer (not included).

The temperature was first set to 37°c. when reached temp the thermometer read 37.6°c.

The temperature was then set to its max temp of 60°c, when it reached temp, the thermometer read 58.8˚c.

RECERTIFIED ITEM

£ 1,250.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R Model no. 300 CO2 Incubator Lab

ITEM-20375

RS Biotech Galaxy R Model no. 300 CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. We have a copy of the report available on request.

it is in good cosmetic condition with minor marks.

RS Biotech Galaxy R CO2 Incubator

Model no. 300

SN - 9550

Inside dimensions - D56 W50 H54cm

4 Shelves - 52 x 48.5cm

RECERTIFIED ITEM

£ 1,250.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-37017

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

2 Shelves - 52 x 48cm

£ 1,240.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Laboratory Incubator Lab

ITEM-30500

This Sanyo MCO-20AIC CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with 5% CO2 at 37 and 50˚C with a digital thermometer (not included). It is in working order.

It is in good cosmetic condition with some marks from use.

Internal dimensions - D51 W61 H66

4 Shelves - 45 x 58cm

Incubators and Growth Chambers

Filters