General Laboratory
Items 361 to 380 of 1118
£ 900.00 (ex. VAT) 1 in stock
New Brunswick Scientific U570 -86 Ultra Low Temperature Freezer
ITEM-30442
This was removed from a university lab where it was surplus to requirements.
Inside dimensions - D57 W76.5 H126cm
2 Shelves - 56 x 75cm
The unit powers up and the temperature was set to -86 and dropped as low as -86˚c (thermometer read -80˚c) after running for 5 hours.
The item is in reasonable cosmetic condition but it is covered in tape marks and residue, and some of the shelf door hinges are broken.
£ 900.00 (ex. VAT) 1 in stock
Binder BD53 Bench-Top Microbiological Laboratory Incubator Natural Convection
ITEM-35474
Binder BD53 Bench-Top Microbiological Laboratory Incubator Natural Convection
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order, and is in good cosmetic condition with marks from use.
3 x Shelves 30cm x 40cm
£ 900.00 (ex. VAT) 1 in stock
Ekom DK50-10 S/M Mobile Air Compressor Lab
ITEM-20493
This Ekom DK50-10 S/M Mobile Air Compressor was removed from a university lab where it was surplus to requirements.
The unit powers up and the needle moved up to 6.5bar. It has not been tested further.
It is in good cosmetic condition but has some marks from use.
Specs
-Air tank 10L
-Run Time: 00714[29]
-Compressor p max 8 bar
-P out, P max (abs) 6.5 bar
£ 900.00 (ex. VAT) 1 in stock
Sanyo CO2 MCO-20AIC Laboratory Incubator Lab
ITEM-29761
This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit is in good working order but will need to be calibrated upon installation.
It is in good cosmetic condition with minor marks from use.
Item is supplied with 3 shelves.
Internal dimensions are L58cm x W45cm x H66cm.
£ 895.00 (ex. VAT) 1 in stock
FASTER BH-EN 2004-D Class II Biological Safety Cabinet Lab
ITEM-29706
This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in good cosmetic condition with minor marks from use.
Internal Dimensions are W 119cm x D 59cm x H 73cm.
£ 895.00 (ex. VAT) 1 in stock
Jouan BR4i Refrigerated Centrifuge with S40 & S20 Rotors Lab
ITEM-35906
Jouan BR4i Refrigerated Centrifuge with S40 & S20 Rotors
The unit powers up and has been temperature tested, and speed tested with both rotors. It is in good working order.
It is in good cosmetic condition with marks from use.
Max RPM- 14000
2 x Juan rotors included:
-Jouan S40 Bucket Rotor with 4 x buckets with lids (0897/24) Max RPM-4300
-Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM with a max load of 1.4kg
£ 890.00 (ex. VAT) 1 in stock
Parker Balston Lab Gas Generator Model 74-5041-220
ITEM-35061
Parker Balston Lab Gas Generator Model 74-5041-220
This was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in reasonably good cosmetic condition with marks from use.
£ 890.00 (ex. VAT) 1 in stock
Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab
ITEM-35288
Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle
This was removed from a university lab where it was surplus to requirements.
Included are;
702 SM Titrino with remote.
The unit powers on and performs self-check.
703 Ti Stand
We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.
Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).
£ 880.00 (ex. VAT) 1 in stock
Bigneat PCR Workstation with UV Timing System Lab
ITEM-36698
Bigneat PCR Workstation with UV Timing System
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition and is in full working order.
Internal Dimensions - 76x52x68cm LWH
£ 880.00 (ex. VAT) 1 in stock
FluidX XSD-96 Pro Tube Automated Capper and De-Capper Lab
ITEM-36370
FluidX XSD-96 Pro Tube Automated Capper and De-Capper
This was removed from a university lab where it was surplus to requirements.
This item is in good cosmetic condition and powered on without issue. It carried out self-checks on start-up - the touch screen is fully functional and the drawer opened and closed, in testing, performing as intended.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 875.00 (ex. VAT) 1 in stock
CTC Analytics MXY 08-01B Liquid Handling System Lab Spares/Repairs
ITEM-20678
This CTC Analytics MXY 08-01B Liquid Handling System was removed from a university lab where it was surplus to requirements
The system powers up but has several issues.
Both robot heads start to work when powered up and they seem to go through an initialisation sequence. The dispenser for the robot on the Right drops at a point so we suspect this one probably has an issue.
Both LCD handsets appear to be faulty and the LCD displays just show a pixelated mess. The petelier does not power up at all and the display is loose.
The PC has quite a few bits of software:
Microcal Origin 7 SR4
VP Viewer 2000 Version 3.0.5
NanoDrop ND-1000 V3.1.0
We cannot tell if the robot is connected to the software. There does not appear to be any obvious way to see this.
System Parts:-
CTC Analytics MXY 08-01B
SN - 180088
MicroCal HT Microcalorimeter
Model - AutoITC
Powers on
CTC Analytics PN - MN 03-00
Stack Cooler DW
MC 04-01
SN - 3495
2 x CTC Analytics MicroCal AutoSamplers PN - MB 01-00A
2 x CTC Analytics PN - MN 01-00 - Both power on
CTC Analytics MODBUS
PN - MV 03-2A
SN - 0.0202
CTC Analytics MZ 012-00E
SN - 0239
CTC Analytics MZ 012-00E
SN - 0240
CTC Analytics MSH 02-00B
Viglen PC
NEC Monitor
Microsoft Mouse
Cherry Keyboard
All power on and work fine.
£ 875.00 (ex. VAT) 1 in stock
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab
ITEM-35645
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights
These were removed from a university lab where they were surplus to requirements.
Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks.
Includes:
10 x Ohaus 200g weights
10 x power supplies
4 x manuals
These scales also have the option to be operated with AA batteries
Max 300g
Model number- TA301
£ 870.00 (ex. VAT) 1 in stock
GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab
ITEM-25464
This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.
There are 6 Racks inside with drawers that hold 5ml tubes.
£ 865.00 (ex. VAT) 1 in stock
Mettler Toledo Titrator Model - DL21 Lab
ITEM-27546
This Mettler Toledo Titrator Model - DL21 was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in reasonable cosmetic condition but the button panel is loose and needs to be glued back on.
It's supplied with a serial cable.
£ 865.00 (ex. VAT) 1 in stock
Bright Microtome Model M3500 Lab
ITEM-25225
This Bright Microtome Model M3500 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. it requires 2 x AA batteries to operate (not included).
There are some tape marks on the unit from general use the battery compartment had signs of corrosion but we have cleaned this up, but some signs remain. It doesn't affect the operation of the unit.
All dials and buttons appear to be responsive to the unit and move freely.
£ 860.00 (ex. VAT) 1 in stock
Sanyo CO2 Incubator Model - MCO-18AIC (UV) Lab
ITEM-27468
This Sanyo CO2 Incubator Model - MCO-18AC was removed from a university lab where it was surplus to requirements.
The unit is in good working order but the UV lamp requires a replacement bulb. We can look at replacing this for you upon purchase.
The unit will need calibration on installation.
It is in good cosmetic condition with minor marks from use.
Internal dims - D51 W48 H65
4 Shelves - 45 x 45cm
£ 860.00 (ex. VAT) 1 in stock
Parker Balston N2-04 Nitrogen Generator Lab
ITEM-35684
Parker Balston N2-04 Nitrogen Generator
This was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition with minor marks but we were unable to test it as it requires a gas cannister.
£ 850.00 (ex. VAT) 1 in stock
LEEC SFC3C/RH Humidity Cabinet Lab
ITEM-36815
LEEC SFC3C/RH Humidity Cabinet was removed from a university lab where it was surplus to requirements.
It powers up and is in working order. The humidity functions were not tested.
It is in good cosmetic condition with marks from use.
5 shelves - 48 x 48cm
£ 845.00 (ex. VAT) 1 in stock
Next Advance Bullet Blender Storm 24 model BBY24M-CE Homogeniser
ITEM-35807
Next Advance Bullet Blender Storm 24 model BBY24M-CE Homogeniser
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition but has some cosmetic cracks in the plastic on the back of the unit.
Capacity 24 x 1.5 ml screw cap tubes
£ 840.00 (ex. VAT) 1 in stock
New Brunswick Scientific Innova 3100 Shaking Water Bath Lab
ITEM-24776
This New Brunswick Scientific Innova 3100 Shaking Water Bath was removed from a university lab where it was surplus to requirements.
The unit has been fully tested by a service engineer. It is in full working order.
It is in reasonably good cosmetic condition with some marks from use.
Interior dimensions:
L45cm x W35cm x D15cm
Items 361 to 380 of 1118