All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell AMA240N Floorstanding Autoclave Lab Spares/Repairs

ITEM-39207

Astell ASA240 Floorstanding Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid.

This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair.

As displayed, it is in poor cosmetic condition internally.

Specifications;

Model- AMA240N
S/N- CLN51381

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Priorclave EV100 Top-Loader Autoclave Lab Spares/Repairs

ITEM-21246

This was removed from a university lab where it was surplus to requirements.

The system has a main board fault. It does not heat up as a result.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Agilent HS 602 Rotary Vane Vacuum Pump Model 749-9365R002 with Oil Filter

ITEM-42271

Agilent HS 602 Rotary Vane Vacuum Pump

This item was removed from a university laboratory where it was surplus to requirements.

The vacuum pump powers on, with the status light changing from red to green as the pump speed increases. It operates smoothly, with no unexpected noises or vibrations.

Includes:

Oil Exhaust Filter NW25

Model: 749-9365R002

Serial No.: IT1328A241

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 Lab Spares/Repairs

ITEM-30166

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit.

It is sold for Spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Refrigerated Centrifuge Spares/Repairs Lab

ITEM-37628

Beckman L7-65 Refrigerated Centrifuge L7-65R

This was removed from a university lab where it was surplus to requirements.

The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds.

For this reason it is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan BR 3.11 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39146

Jouan BR 3.11 Refrigerated Centrifuge Lab

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers up.

Despite being in reasonably good cosmetic condition, this item is to be sold as Spares or Repairs due to its inability to maintain the set temperature and keep the lid open.

Included:

Jouan B 3.11 Centrifuge G=420 g, 4000 RPM Rotor & 11174179 Buckets

Beckman Coulter SW32Ti Swinging Bucket Rotor

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR Incu-Line Incubator Lab Spares/Repairs

ITEM-39196

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and works, but the door mechanism is broken, and the door will not remain closed.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-554 Incubator Lab Spares/Repairs

ITEM-36213

This was removed from a university lab where it was surplus to requirements.

The unit does not power up.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

LEEC Compact Incubator Model K2N Lab

ITEM-41676

LEEC Compact Incubator Model-K2N Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition internally and externally.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LMS 400NP Cooled Incubator Lab Spares/Repairs

ITEM-42191

LMS 400NP Cooled Incubator

This item was removed from a university where it was surplus to requirement.

The incubator is in excellent cosmetic condition and powers on.

However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.

Therefore, it is listed as Spares/Repair.

Specifications:

Serial No.: 12425/17PP
Capacity: 450 litres
Internal dimensions: 64 x 55 x 118 cm (l x w x h)
Temperature range: -10°C to 50°C
4 height adjustable shelves (56 x 60 cm)
Factory set auto defrost system

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Compact LidPark P00155 Lab

ITEM-37180

Thermo Scientific Compact LidPark P00155

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers up, we are unable to test it further at our facility.

Model: LidPark P00155

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753680-2 Reach In Incubator Lab Spares/Repairs

ITEM-39203

Wheaton 753680-2 Reach In Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

ITEM-39202

VWR 1927 Reach-In Dry C02 Incubator

This was removed from a university lab where it was surplus to requirement.

The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch.

The top panel is missing.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan CR 412 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-37144

Jouan CR 412 Centrifuge

This unit was removed from a university where it was surplus to requirement.

This item is in reasonably good cosmetic condition.

It powers on, but the button functions are unresponsive to the unit, therefore unable to conduct any testing.

The lid opened with manual emergency release.

It is sold as Spares/Repairs.

Includes the following:

2x Swinging Buckets:

Part no: 11174154

Volume: 450ml

Bucket Vial Adaptor Inserts:

1x set 7x 50ml vials - RED

1x set of 7x 15ml / 16x 6ml vials - BROWN

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller B-741 Lab Spares/Repairs

ITEM-41104

Buchi Distillation Chiller B-741

This was removed from a university lab where it was surplus to requirements.

The unit did not power up in tested and we were informed that it was out of order and non-function prior to collecting it.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fisher Scientific Isotemp Recirculating Chiller Lab Spares/Repairs

ITEM-41106

Fisher Scientific Isotemp Recirculating Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the lab confirmed it was not pumping correctly, and therefore not cooling correctly prior to collection.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Shandon Excelsior Tissue Processor Lab SPares/Repair

ITEM-39981

This Thermo Electron Corporation Shandon Excelsior Tissue Processor was removed from a university lab where it was surplus to requirements.

The unit powered up initially but quickly faded.

It has a suspected PSU fault.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 160 CO2 Laborator Incubator Lab

ITEM-39007

Binder ED23 Drying And Heating Laboratory Oven

This was removed from a university lab where it was surplus to requirements.

The item powers on but the displays "error" after a short whilethat prevents the item from being tested.

It is in very good cosmetic condition.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carbolite CTF 12/100 Tube Furnace Lab Spares/Repairs

ITEM-36639

Carbolite CTF 12/100 Tube Furnace

This was removed from a university lab where it was surplus to requirements.

Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Dimension BST 1200 3D Printer Spares/Repairs

ITEM-39272

Dimension BST 1200 3D Printer

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition, both internally and externally.

It does not power on, therefore it's sold as Spares or Repairs.

The main board, junction board, CCD board, lighting board, I/F board, laser board, and panel board all have been disassembled from the main unit.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors AG HT Ecotron Shaking Incubator Lab Spares/Repairs

ITEM-39829

Infors AG HT Ecotron Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator is in reasonably good cosmetic condition, both internally and externally.

It powers on successfully, with display screens, buttons, and interior lights in working order. While the shaker motor can be heard, there is no movement from the platform, which may indicate a broken or slipped belt.

The temperature functionality is in good working order (thermometer not included).

Specifications:

Platform Dimensions (W×D): 42×42 cm
Model: HT Ecotron
Serial No.: 109025

£ 500.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000i Benchtop Centrifuge Lab Spares/Repairs

ITEM-37436

MSE Mistral 3000i Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature.

Additionally included:

1 x MSE Rotor

Model BS4402

7 x Swinging Buckets:

Volume: 250ml

Bucket Adaptors:

6 x Blue

Holds: 12x 5ml Vials

7 x Grey

Holds: 4 x 12ml Vials

8 x MSE Brown

Holds: 1 x 100ml VIals

1 x Hex Key Locking Bar

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

This item does not power on, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge w/ S40 Rotor Lab

ITEM-45413

Jouan B4i Benchtop Centrifuge with S40 Rotor

This item was removed from a university where it was surplus to requirements.

The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit.

It is in fair cosmetic condition, showing signs of general use.

Includes:

S40 Swinging bucket rotor with 4 buckets
4 additional buckets
12 x bucket inserts

Specifications:

Model: B4i
Serial No.: 30202056
Maximum RPM: 14,000 (unit); 4,300 (rotor)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

ITEM-35616

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition both internally and externally.

When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Biofuge 22R Centrifuge Lab Spares/Repairs

ITEM-35675

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Amersham Biosciences AKTA Prime FPLC System Lab

ITEM-36304

Amersham Biosciences AKTA Prime

This was removed from a university lab where it was surplus to requirements.

The unit was serviced but failed the service. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has no screen and required a new CO2 sensor prior to the screen being removed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer Lab

ITEM-41127

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wallac 1450 Microbeta Trilux Liquid Scintillation -19994 Lab Spares/Repairs

ITEM-19994

Wallac 1450 Microbeta Trilux Liquid Scintillation

The system tripped ad RCD on the main supply during testing. The internal PSU has shorted.

It is sold for spares/repairs.

Included are;

Microbeta V4.6 Protocol Disk

1450 Microbeta Trilux Main Program 4.6

Comes with:-

Belinea 15" Monitor - Powers on

HP Keyboard

Logitech Mouse

HP Vectra VL5/166 MMX Series 5 DT - PC Does not power on. HDD removed. We left it with the system in case it has useful PCI cards.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge Lab Spares/Repairs

ITEM-45431

Eppendorf 5804 R Centrifuge Lab

This item was removed from a university where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. However, it displays "Error 14," indicating an electrical fault, and also has a faulty lid locking mechanism.

Due to both errors listed above, this item is listed as Spares/Repair.

Specifications:

Model: 5804 R
Serial No.: 5805CI964308

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with CO2 leaking.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab Spares/Repair

ITEM-45126

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

The item powers on and is in a reasonable used cosmetic condition.

It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom.

During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.

Therefore, it is listed as Spares/Repair and no further testing was conducted.

Specifications:

Model: U570 -86
Serial No.: 1004-5204-1103

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Walker All In One Fumigation Units Lab

ITEM-46390

Job Lot of 6 x Walker All In One Fumigation Units Lab

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included is the following:

6 x Walker All In One Fumigation Units

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Spares/Repairs

ITEM-36885

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonable, used cosmetic condition.

The centrifuge was tested at a high spin rate and achieved approximately 1650rpm. Temperature control tests were performed; the system failed to reach the set temperatures of -20˚C and 37˚C, only stabilizing around 20˚C.

Due to the temperature faults experienced during testing, this item is listed as Spares/Repair.

Includes:

Cart/stand: Dimensions L78 x W70 x H73 cm
4 x swinging buckets
2 x adaptors for 12 x 15ml tubes each
2 x adaptors for 50 x 0.5ml tubes each
2 x adaptors for 32 x 1.5ml tubes each (PN-10-5043)

Specifications.

Model: HT4 Series 2
Serial No.: 5794

This system does not include a vacuum pump.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

£ 500.00 (ex. VAT) 1 in stock

INTEK Model LH200 Fraction Collector Lab

ITEM-37685

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

INTEK LH200 Fraction Collector Lab

ITEM-37686

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Mixed Job Lot of Laboratory Equipment - Zeiss, Jouan, Hybaid, Grant, Panasonic

ITEM-46872

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

PTI FiberLite F10-6x500y Fixed Angle Centrifuge Rotor 250ml Adapter Sleeves Lab

Misc Parts

Oxford Instruments SuperAmp Power Amplifier Lab

Diall IP54 LED Rechargable Worklight

Quanta Biotech S-96 Satellite Gradient Thermal Cycler Lab

ALC T537 Microplate Rotor with Plate Buckets 4100rpm Lab

2 x LKB Wallac 1291 Reagent Dispensers Lab

Jouan A-14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor Lab

Watson Marlow SCI Q 400 Peristaltic Pump Lab

Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 (No Key) Lab

IKA YellowLine Ultra Turrax Tube Disperser Model - UT TD S2 Lab

Dionex As-1 Autosampler Lab Spares/Repairs

Carl Zeiss Binocular Microscope w/ 3 Objectives 160/0.17 Lab

Rank Brothers Integrated Oxygen Model 10 Measurement Unit Lab

Hettich Mikro 185 Microcentrifuge

Zeiss Internal 100W Power Supply VP168-3

Integra Vacusafe (158 3XX) With 2 x Integra Vacuboy Pipettes

Lot Of Thermo Scientific Chromacol EPA Pre-Assembled Vials

Grant-Bio PMS-1000 Microplate Shaker

Faster Formalin Vaporizer

Panasonic SDIII Super Dynamic CCTV Camera

Julabo MP-5 Heating Circulator Water Bath Lab

Hybaid Shake 'n' Stack Rotisserie Lab Hybridisation Oven

Sirah PCH-1000 Circulator for Laser

Magstim 200 Stimulator Unit With Coil Accessories and Stand System Lab

Varian Cary 50 Bio UV-Visible Spectrophotometer Lab

Packard MicroMate 496 Plate Sealer Lab

Grant JB5 Water Bath Lab

Lot of Various Sized Buchner Funnels Lab

IEC MicroMax Benchtop Centrifuge Lab

All Products

Filters