All Products

£ 155.00 (ex. VAT) 1 in stock

Electromantle MA Heating Mantle Solid State Stirrer Model: EMA 0500/CE Lab

ITEM-24933

This was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. There are scratches and stains from prior use. It has been written on by the previous lab.

The item powered on without issue. The magnetic stirrer works as intended.

When set to 3 on the dial the thermometer measured 64.3˚C.

When set to 6 on the dial the thermometer measured 115.6˚C.

When set to 10 on the dial the thermometer measured 309.2˚C.

£ 155.00 (ex. VAT) 1 in stock

Stuart Scientific STR4 Rotator Drive Unit Lab

ITEM-23450

This Stuart Scientific STR4 Rotator Drive Unit was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some light scuff marks from general use.

All the knobs and dials appear to be working. The speed dial communicates with the motor and turns the head of the unit effectively.

£ 155.00 (ex. VAT) 1 in stock

Powertecnique Uninterruptible Power Supply UPS Naos 80/TM with Battery Box

ITEM-20367

Powertecnique Uninterruptible Power Supply UPS Naos 80/TM with Battery Box

These units were removed from a university lab where they were surplus to requirements.

Neither unit has been tested as we don't have the power cable for them. They were last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries have failed.

They are in reasonably good cosmetic condition with some marks from use.

Included are;

1 x Uninterruptable Power Supply

UPS Naos 80/TM

T1-1-1-4-12

1 x Battery Box

360-7 Neutro

£ 155.00 (ex. VAT) 1 in stock

Oxford Instruments SuperAmp Power Amplifier Lab

ITEM-18371

This Oxford SuperAmp Model Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

£ 150.00 (ex. VAT) 1 in stock

BECKMAN Type JA-18.1 Centrifuge Rotor Lab

ITEM-41408

BECKMAN Type JA-18.1 Centrifuge Rotor 1-96

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition and has not been tested.

Includes:

Manual

Specifications:

Type: 18.1
Serial No.: 306

NEW ITEM

£ 150.00 (ex. VAT) 1 in stock

19 x Pairs of Portwest Slip-On Safety Shoes & 1 x Honeywell Safety Shoes

ITEM-36181

19 x Pairs of Portwest Slip-On Safety Shoes & 1 x Honeywell Safety Shoes

All the shoes are brand new and supplied with he original boxes.

Included are;

FW81 Portwest Slip On Safety Shoes - WHITE

4UK - 1

6UK - 1

8UK - 3

9UK - 1

10UK - 2

FW81 Portwest Slip On Safety Shoes - BLACK

5UK - 1

6UK - 2

7UK - 3

8UK - 2

9UK - 2

10UK - 1

Honeywell Bacou Creek AMG - BLACK

5UK - 1

£ 150.00 (ex. VAT) 1 in stock

Heraeus B5060 EK/CO2 Incubator Lab

ITEM-38205

Heraeus B5060 EK CO2 Incubator

This item was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good condition, with the door seal and catch in good condition. It powered on, and the controls and digital displays were functioning as intended.

It powers up and is in good working order (thermometer & CO2 analyser not included). CO2 stabilised at 5%.

Specifications:

Internal Dimensions: L 60cm x W 51cm x H 55cm
Six shelves fitted
No UV lamp fitted
Over temperature cut-off working

No further testing carried out.

Model: B5060 EK/CO2

Serial No: 8403214.

£ 150.00 (ex. VAT) 1 in stock

Heraeus B5060 EK Co2 Incubator Lab

ITEM-38204

Heraeus B5060 EK CO2 Incubator

This item was removed from a university lab where it was surplus to requirements.

The unit is in good clean condition with intact feet and a door seal and catch in good condition. It powered on, and the controls and digital displays were functioning as intended.

The unit powers up and is in good working order (thermometer & CO2 analyser not included). CO2 stabilised at 5%.

Specifications:

Internal Dimensions: L 60cm x W 51cm x H 55cm
Five shelves fitted
No UV lamp fitted
Over temperature cut-off working

No further testing carried out.

Model: B5060 EK

Serial No: 8607594

£ 150.00 (ex. VAT) 1 in stock

Multi Job Lot of Mixed Toner Cartridges, HP, TK-320, Q-Connect

ITEM-38145

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should be in working order or brand new.

The units have not been tested at all.

ITEM-37926 CB403A Tonner

ITEM-37921 CB400A

ITEM-37920 CE401A

ITEM-37918 CE403A

ITEM-37922 HP C9730A

ITEM-37919 CB402A

ITEM-37927 Job lot x 16 H285CU Toner

ITEM-37928 HP C4182X

ITEM-37924 HP C4182X Toner

ITEM-37929 HP 343

ITEM-37925 TK-320 Toner Kit

ITEM-37923 Cyan Laser Toner

ITEM-38146 Job Lot of Toner Cartridges

£ 150.00 (ex. VAT) 1 in stock

MBO Mobile Air Conditioner MA88001 KY-20

ITEM-31479

MBO Mobile Air Conditioner

Model: MA88001 KY-20

This item was removed from a university where it was surplus to requirement.

The unit powers on and is in working order, with the air flow functioning as expected. It has a temperature range of 16˚C - 30˚C.

The item is in reasonable, used cosmetic condition.

£ 150.00 (ex. VAT) 1 in stock

Heraeus Benchtop Laboratory Incubator Type - B 5060 EK-CO2 Lab

ITEM-28140

This Heraeus Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been tested with a digital thermometer (not included) at 5% CO2.

The temperature was first set to 37°c, it took around two hours to reach.

The temperature was then set to its max of 50°c but it only reached as high as 43.7˚c on the thermometer after running for nearly 6 hours.

Our external CO2 Gauge only registered 3.8% CO2 while it was running.

Internal dimensions - D57 W60 H60.5cm

6 x Shelves - 51 x 27cm

£ 150.00 (ex. VAT) 1 in stock

Heraeus Sorvall Swinging Bucket Centrifuge Rotor Mod No. 1615 Ch. 008602 Lab

ITEM-27925

This Heraeus Sorvall Swinging Bucket Centrifuge Rotor Mod No. 1615 Ch. 008602 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need inspecting for safety by a qualified engineer or technician before it can be used again.

It comes with;

4 x Buckets

Interior Dims:

L7.1cm x W9cm x D9.4cm

EQ No. 40762384

Max Speed 5850rpm

Max Load 600g

Autoclavable 121ºC

£ 150.00 (ex. VAT) 1 in stock

Corning Fiber DCM Module Model DCM-C-020 Lab

ITEM-25657

This Corning Fiber DCM Module Model DCM-C-020 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, there are some surface scratches from general use.

There was no PSU supplied so we were unable to power it up.

Included with it ar;

2x Optical cables

Model No

M318755-0659651 RO C119577

M318754-0619651 RO C119577

£ 150.00 (ex. VAT) 1 in stock

Corning Dispersion Compensator Module Model No. DCM-C-040-SP Lab

ITEM-25656

This Corning Dispersion Compensator Module Model No. DCM-C-040-SP was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition. There are surface scratches from general use.

No PSU was supplied so we were unable to power it up.

Model No. DCM-C-040-SP

Dispersion: 685ps/nm

Attenuation: 4.74dB

With it were 2x Optical cables

£ 150.00 (ex. VAT) 1 in stock

Gentex Q-Fill II 2 and Q-Stack Microplate Stacker System Lab

ITEM-25188

This Gentex Q-Fill II 2 and Q-Stack Microplate Stacker System was removed from a university lab where it was surplus to requirements.

Included are;

1x Gentex QFill2

Model, Q-Fill II

Software Version 2.2

The unit powers on and is in good cosmetic condition. All buttons appear responsive to the unit. It hasn't been tested at any real length.

1x QStack

Model, Q-Fill Stacker

The unit powers on and is in good cosmetic condition. It went through the start-up procedure but was not tested further.

They connect together with a serial cable but we were unable to test them further. We believe this system needs to be connected to a computer and controlled by that.

£ 150.00 (ex. VAT) 1 in stock

B&T Unitemp Benchtop Laboratory Incubator Lab

ITEM-24675

The unit powers on and is in good cosmetic condition. The unit does have tape marks and surface stains around it from general use. The rubber seal on the door is quite dirty and stained from general use.

The unit was tested with a digital thermometer (not included).

When set to 37ºC our thermometer read 29.8ºC

When set to 65ºC our thermometer read 46.6ºC

When set to 100ºC our thermometer read 79.3ºC

The unit was powered on for most of a morning to reach these temperatures.

Interior dimensions:

H36cm x W38cm x D32cm

£ 150.00 (ex. VAT) 2 in stock

Extreme Networks Black Diamond 8800 MSM-48 Model - 41212 Network Switch Module

ITEM-19285

This Extreme Networks Black Diamond 8800 MSM-48 Model - 41212 Network Switch Module was removed from a university AV department where it was surplus to requirements.

The unit comes supplied in the original packaging but has been opened. It may have been used but is in good cosmetic condition.

The unit has not been tested.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 150.00 (ex. VAT) 1 in stock

22 X Affymetrix GeneChip Arrays - Human Exon 1.0 ST , Bottles & Racks Lab

ITEM-18428

22 X Affymetrix GeneChip Arrays & Accessories.

These were removed from a university lab where they were surplus to requirements. All the items are in good cosmetic condition but have been used previously.

Included in total are;

15 X Affymetrix GeneChip Human Exon 1.0 ST Arrays

7 x Affymetrix GeneChip with no labels.

(The labelled ones all have expired dates on them).

6 x GeneChip racks.

2 x Empty Nalgene plastic bottles:

1 x 1000ml.

1x 500ml.

£ 150.00 (ex. VAT) 1 in stock

Oxford Instruments 1 Amp Magnet Power Supply Unit Lab

ITEM-18373

This Oxford Instruments 1 Amp Magnet Power Supply Unit was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition but has marks from use.

£ 150.00 (ex. VAT) 1 in stock

Oxford Instruments Model SuperAmp Power Amplifier Lab

ITEM-18372

This Oxford SuperAmp Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further. It is in reasonably good cosmetic condition but has some marks from use.

£ 150.00 (ex. VAT) 1 in stock

Oxford Instruments SuperAmp Power Amplifier Lab

ITEM-18370

This Oxford Instruments SuperAmp Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with only light marks from use.

It powers up but has not been tested further.

£ 150.00 (ex. VAT) 2 in stock

Oxford Instruments Power Amplifier Lab

ITEM-17954

This Oxford Instruments Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with some marks from use.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 150.00 (ex. VAT) 1 in stock

Oxford RT 110 Oil Cooled Arc Welder

ITEM-41146

Oxford RT 110 Oil Cooled Arc Welder

Model: RT 110

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but we are unable to test it at our facility.

The lab believed it was in working order prior to removal.

£ 150.00 (ex. VAT) 1 in stock

BOC LD180 a.c. Welding Set

ITEM-41145

BOC LD180 a.c. Welding Set

Model: LD180

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but we are unable to test it at our facility.

The lab believed it was in working order prior to removal.

£ 150.00 (ex. VAT) 1 in stock

Molectron Powermax PM500A-2 Laser Power Meter Lab

ITEM-25452

This Molectron Powermax Laser Power Meter Model no. PM500A-2 was removed from a university lab where it was surplus to requirements.

The unit powers up with both a DC PSU (not included) or a 9V battery (Also not included).

It is in reasonably good cosmetic condition with some marks from use.

£ 150.00 (ex. VAT) 1 in stock

Molectron Powermax Model PM500A-2 Laser Power Meter Lab

ITEM-25451

This Molectron Powermax Laser Power Meter Model no. PM500A-2 was removed from a university lab where it was surplus to requirements.

The unit powers up with both a DC PSU (not included) or a 9V battery (Also not included).

It is in reasonably good cosmetic condition with some marks from use.

£ 150.00 (ex. VAT) No longer available

World Precision Instruments Intra 767 Electrometer - 767-B Lab

ITEM-20456

This World Precision Instruments Intra 767 Electrometer was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. All buttons and switchers appear to be working. We were unable to test it further.

There is a test probe included with it.

NEW ITEM

£ 145.00 (ex. VAT) 1 in stock

6 x Nest BioFactory 10 Chambers Wide Mouth 771302 Lab

ITEM-36929

Nest BioFactory 10 Chambers Wide Mouth 771302

This was removed from a university lab where it was surplus to requirements.Nest BioFactory 10 Chambers Wide Mouth

No. 771302

Qty - 1/Pack, 6/Cases

Expiry 2025

They are brand new and sealed, the box was only opened to check inside.

£ 145.00 (ex. VAT) 1 in stock

LDC Analytical HPLC Membrane Degasser Lab

ITEM-30005

This LDC Analytical HPLC Membrane Degasser was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in reasonable cosmetic condition with some marks and stains.

£ 145.00 (ex. VAT) 1 in stock

Beckman 166 Detector Lamp Replacement Deuterium Lamp Kit - P/N: 538706

ITEM-27672

Beckman 166 Detector Lamp Replacement Deuterium Lamp Kit - P/N: 538706

This was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition. It is very clean with no marks or scratches.

There was no information given to indicate how the lamp has run for, or if it has at all. It hasn't been tested with any of our equipment.

Also included are the following:

1x Installation Guide

2x Washers

1x Spring

£ 145.00 (ex. VAT) 1 in stock

Heraeus Biofuge Pico Centrifuge with 3324 Rotor Lab

ITEM-25991

This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly.

The unit was tested at the max speed of 13000rpm and ran smoothly.

The unit has the following rotor fitted;

Heraeus Rotor #3324

•PP1/96

•Max Speed 13000rpm

• Max load 24x4g

•24x 2.0 flat cap tube holders.

No further testing done.

£ 145.00 (ex. VAT) 1 in stock

Corning Dispersion Compensator Module Model DCM-C-040-SP Lab

ITEM-25659

This Corning Dispersion Compensator Module Model DCM-C-040-SP was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with marks from use.

No PSU was supplied with it so we were unable to test it.

2x Optical cables

Part Nos.

APC-1J-005

Model DCM-C-040-SP

Dispersion: 685ps/nm

Attenuation: 5.23dB

£ 145.00 (ex. VAT) 1 in stock

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets Lab

ITEM-23407

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets

These were removed from a university lab where they were surplus to requirements.

They are in good cosmetic condition but have some marks from use.

£ 145.00 (ex. VAT) 1 in stock

Jouan A-14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor Lab

ITEM-20120

This Jouan A14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but it has some light stains on the lid and side panels. The Interior and rotor are clean.

The rotor has 20 sample spaces, it accepts 2ml vials. It is rated at 14000rpm.

It powers up fine and has been tested at a few different speeds. The numbers don't necessarily match up with the RPM of the unit.

Set at 3, the centrifuge hit 5800 RPM.

Set to 9, the centrifuge hit 11500 RPM.

Set to max of 14000, the centrifuge hit 14200 RPM.

£ 145.00 (ex. VAT) 1 in stock

Thomas Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump

ITEM-19016

This Thomas Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump was removed from a university lab where it was surplus to requirements.

The unit sounds like it powers up but has no power indicator on it. The fan blades however do now spin. It has not been tested.

It is in good cosmetic condition with very limited marks from use.

£ 145.00 (ex. VAT) 1 in stock

THOMAS Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump Lab

ITEM-18929

This THOMAS Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump was removed from a university lab where it was surplus to requirements.

It is in reasonable cosmetic condition but has some stains and marks from use.

It has not been tested as it has an unusual power connector which we do not have an adapter for.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 145.00 (ex. VAT) 1 in stock

Union Carbide Liquid Nitrogen Refrigerator Tank/Dewar & Trolley Lab

ITEM-18512

This Union Carbide Liquid Nitrogen Refrigerator Tank/Dewar & Trolley was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition but is covered in peeling stickers. It has not been tested.

£ 145.00 (ex. VAT) 1 in stock

Spectra Physics 2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box Lab

ITEM-23507

Spectra Physics 2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box

This system was removed from a university lab where it was surplus to requirements.

Included are;

1 x Spectra Physics Laser Model 2025-45

The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location.

1 x Spectra Physics Power supply Model 2560

We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys.

1 x Spectra Physics Control Box Model 2270

The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.

NEW ITEM

£ 140.00 (ex. VAT) 1 in stock

Teknomek Stainless Steel Lectern with Double Undershelf

ITEM-36693

Teknomek Stainless Steel Lectern with Double Undershelf

This was removed from a university lab where it was surplus to requirements.

It is brand new and unused.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Width: 600mm
Depth: 400mm
Height: 1000mm
Floor clearance: 175mm

£ 140.00 (ex. VAT) 1 in stock

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-GRN

ITEM-31955

This Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-GRN was removed from a university lab where it was surplus to requirements.

The item powers on with UV light working.

The item is in a reasonable, used cosmetic condition.

£ 140.00 (ex. VAT) 1 in stock

Anrtisu Portable STM-16 Analyzer Model MP1656A Lab

ITEM-25640

This Anrtisu Portable STM-16 Analyzer Model MP1656A was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some tape marks around the unit from general use.

The fan started up almost immediately after powering on the unit and all buttons appear to be responsive.

With it is;

1 x IDEC Key: Mod No. 132

£ 140.00 (ex. VAT) 1 in stock

Electromantle MA Heating Mantile Solid State Stirrer EMA 0500/CE MK1 Lab

ITEM-24935

This was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. There are scratches and stains on its surface.

The item powered on without issue. The magnetic stirrer works as intended.

When set to 3 on the dial the thermometer measured 58.0˚C.

When set to 6 on the dial the thermometer measured 92.5˚C.

When set to 10 on the dial the thermometer measured 282.9˚C.

£ 140.00 (ex. VAT) 1 in stock

Millipore Milli-Q Synthesis Water Purification System Cat no. ZMQS5VF01 Lab

ITEM-24444

Millipore Milli-Q Synthesis Water Purification System Cat no. ZMQS5VF01

This was removed from a university lab where it was surplus to requirements.

The item powers on but displays system errors 4 & 7 with service and alarm lights flashing. We were unable to test it any further.

The item is in a reasonable, used cosmetic condition.

£ 140.00 (ex. VAT) 1 in stock

Buchi GKR-50 Glass Tube Drying Oven Lab

ITEM-24338

This Buchi GKR-50 Glass Tube Drying Oven was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included).

We set the temperature to around 37˚c on the dial and the thermometer went up to 35˚c. We then turned it up to 100˚c, and the thermometer read 80˚c, finally, we turned it up to 200˚c and the thermometer reached 167˚c.

It is in reasonably poor cosmetic condition and has lots of marks from use as well as rust.

£ 135.00 (ex. VAT) No longer available

Vintage Six Drawer Industrial Filing Cabinet

ITEM-35711

Vintage Six Drawer Industrial Filing Cabinet

This was removed from a university engineering lab. It was surplus to requirements.

The unit is in reasonable cosmetic condition but has quite a bit of rust on it. It would make for a good upcycling project.

It measures 30x29x99cm LWH

6 drawers each measuring: Wx23Dx13Lx38

£ 135.00 (ex. VAT) 1 in stock

KNF N022.AN.18 Diaphragm Vacuum Pump Lab

ITEM-34965

This KNF N022.AN.18 Diaphragm Vacuum Pump was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

It is in good cosmetic condition with marks from use.

NEW ITEM

£ 135.00 (ex. VAT) 4 in stock

Millipore Millistak+ HC Pod Depth Filter A1HC MA1HC05FS1 0.55sq.m Lab

ITEM-31086

Millipore Millistak+ HC Pod Depth Filter A1HC 0.55sq.m MA1HC05FS1

This was removed from a lab where it was surplus to requirements.

It is brand new and sealed in the box.

NEW ITEM

£ 135.00 (ex. VAT) 5 in stock

Millipore Millistak+ HC Pod Depth Filter DOHC MD0HC05FS1 0.55sq.m Lab

ITEM-31082

Millipore Millistak+ HC Pod Depth Filter DOHC MD0HC05FS1 0.55sq.m

This was removed from a lab where it was surplus to requirements.

The unit is brand new and sealed.

£ 135.00 (ex. VAT) 1 in stock

New Brunswick CO2 BackUp System Controller Kit UT9043-0000-001

ITEM-27755

This New Brunswick CO2 BackUp System Controller Kit UT9043-0000-001 was removed from a university lab where it was surplus to requirements.

The item is in very good cosmetic condition. It has its original box/packaging, which it was removed from to take photos. The accessories were also still in their original packaging and seemed unused.

The item powered on without issue. It began to beep emitting a sharp and loud repeated beep.

A full list of what is included is below. It has been checked against the packing list and nothing is missing.

1x Packing List for CO2 Controller Kit

1x Manifold/Line

UT9043-1009-001

1x Dowty Seal

CT0741-0000-003

1x Temperature Sensor

UT9043-1003-001

1x Clamp Plate - Square

UT9043-1004-500

1x Clamp PL - U Shape

CT0240-0004-001

1x Proximity Switch

UT9043-1005-001

1x Actuator Magnet

CT0420-0001-001

1x Hole Plug - 9.5mm Black

CT0240-0001-001

1x Hole Plug - 9.5mm Clear

CT0160-0013-004

2x Insulation Tube 25mm Long

CT0840-0004-001

2x Switch Adaptor Plates (VIP)

UT9043-1001-001

5x Cable Ties

CT0160-0003-001

1x Plug 3P (Alarm)

CT0380-0012-002

1x Guide to Operations/Handbook CO2

CT0540-0000-003

£ 135.00 (ex. VAT) 1 in stock

Avenex Powerform DCM Fiber Module Part Number. 0313063001 Lab

ITEM-25667

This Avenex Powerform DCM Fiber Module Part Nbr. 0313063001 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and there are some tape and scratch marks from general use.

We were unable to test it.

Dispersion: @ 1545nm -1646ps/nm

Loss: 6.2dB

All Products

Filters