All Products

£ 150.00 (ex. VAT) 1 in stock

B&T Unitemp Benchtop Laboratory Incubator Lab

ITEM-24675

The unit powers on and is in good cosmetic condition. The unit does have tape marks and surface stains around it from general use. The rubber seal on the door is quite dirty and stained from general use.

The unit was tested with a digital thermometer (not included).

When set to 37ºC our thermometer read 29.8ºC

When set to 65ºC our thermometer read 46.6ºC

When set to 100ºC our thermometer read 79.3ºC

The unit was powered on for most of a morning to reach these temperatures.

Interior dimensions:

H36cm x W38cm x D32cm

£ 150.00 (ex. VAT) 1 in stock

Multi Job Lot of Mixed Toner Cartridges, HP, TK-320, Q-Connect

ITEM-38145

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should be in working order or brand new.

The units have not been tested at all.

ITEM-37926 CB403A Tonner

ITEM-37921 CB400A

ITEM-37920 CE401A

ITEM-37918 CE403A

ITEM-37922 HP C9730A

ITEM-37919 CB402A

ITEM-37927 Job lot x 16 H285CU Toner

ITEM-37928 HP C4182X

ITEM-37924 HP C4182X Toner

ITEM-37929 HP 343

ITEM-37925 TK-320 Toner Kit

ITEM-37923 Cyan Laser Toner

ITEM-38146 Job Lot of Toner Cartridges

NEW ITEM

£ 150.00 (ex. VAT) 1 in stock

19 x Pairs of Portwest Slip-On Safety Shoes & 1 x Honeywell Safety Shoes

ITEM-36181

19 x Pairs of Portwest Slip-On Safety Shoes & 1 x Honeywell Safety Shoes

All the shoes are brand new and supplied with he original boxes.

Included are;

FW81 Portwest Slip On Safety Shoes - WHITE

4UK - 1

6UK - 1

8UK - 3

9UK - 1

10UK - 2

FW81 Portwest Slip On Safety Shoes - BLACK

5UK - 1

6UK - 2

7UK - 3

8UK - 2

9UK - 2

10UK - 1

Honeywell Bacou Creek AMG - BLACK

5UK - 1

£ 150.00 (ex. VAT) 1 in stock

World Precision Instruments Intra 767 Electrometer - 767-B Lab

ITEM-20456

This World Precision Instruments Intra 767 Electrometer was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. All buttons and switchers appear to be working. We were unable to test it further.

There is a test probe included with it.

£ 150.00 (ex. VAT) 1 in stock

Beko Laboratory Freezer TZS 490 Lab

ITEM-31220

This Beko Laboratory Freezer TZS 490 was removed from a laboratory where it was surplus to requirements.

The unit powers up and is in full working order to -29˚C.

It is in good cosmetic condition with minor marks from use.

As it is from a lab environment, this is suitable for lab use only.

Internal dimensions - D41 W42 120cm

4 Shelves 39 X 41cm

4 Baskets - 41 x 39 x 19cm

£ 150.00 (ex. VAT) 2 in stock

Oxford Instruments Power Amplifier Lab

ITEM-17954

This Oxford Instruments Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with some marks from use.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 150.00 (ex. VAT) 1 in stock

Molectron Powermax Model PM500A-2 Laser Power Meter Lab

ITEM-25451

This Molectron Powermax Laser Power Meter Model no. PM500A-2 was removed from a university lab where it was surplus to requirements.

The unit powers up with both a DC PSU (not included) or a 9V battery (Also not included).

It is in reasonably good cosmetic condition with some marks from use.

£ 150.00 (ex. VAT) 1 in stock

Molectron Powermax PM500A-2 Laser Power Meter Lab

ITEM-25452

This Molectron Powermax Laser Power Meter Model no. PM500A-2 was removed from a university lab where it was surplus to requirements.

The unit powers up with both a DC PSU (not included) or a 9V battery (Also not included).

It is in reasonably good cosmetic condition with some marks from use.

£ 150.00 (ex. VAT) 1 in stock

Heraeus Sorvall Swinging Bucket Centrifuge Rotor Mod No. 1615 Ch. 008602 Lab

ITEM-27925

This Heraeus Sorvall Swinging Bucket Centrifuge Rotor Mod No. 1615 Ch. 008602 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need inspecting for safety by a qualified engineer or technician before it can be used again.

It comes with;

4 x Buckets

Interior Dims:

L7.1cm x W9cm x D9.4cm

EQ No. 40762384

Max Speed 5850rpm

Max Load 600g

Autoclavable 121ºC

£ 150.00 (ex. VAT) 1 in stock

Oxford Instruments Model SuperAmp Power Amplifier Lab

ITEM-18372

This Oxford SuperAmp Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further. It is in reasonably good cosmetic condition but has some marks from use.

£ 150.00 (ex. VAT) 1 in stock

Oxford Instruments SuperAmp Power Amplifier Lab

ITEM-18370

This Oxford Instruments SuperAmp Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with only light marks from use.

It powers up but has not been tested further.

£ 150.00 (ex. VAT) 1 in stock

Oxford Instruments 1 Amp Magnet Power Supply Unit Lab

ITEM-18373

This Oxford Instruments 1 Amp Magnet Power Supply Unit was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition but has marks from use.

£ 150.00 (ex. VAT) 1 in stock

Oxford RT 110 Oil Cooled Arc Welder

ITEM-41146

Oxford RT 110 Oil Cooled Arc Welder

Model: RT 110

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but we are unable to test it at our facility.

The lab believed it was in working order prior to removal.

£ 150.00 (ex. VAT) 1 in stock

BOC LD180 a.c. Welding Set

ITEM-41145

BOC LD180 a.c. Welding Set

Model: LD180

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but we are unable to test it at our facility.

The lab believed it was in working order prior to removal.

SPARES/REPAIR ITEM

£ 150.00 (ex. VAT) 1 in stock

Gallenkamp Hotbox Oven With Fan Size 2 Lab Spares/Repairs

ITEM-44715

Gallenkamp Hotbox Oven With Fan Size 2 Lab

This item was removed from a university where it was surplus to requirement.

It is in poor cosmetic condition and has failed its PAT.

Therefore, we are unable to test it and it is listed as Spares/Repair.

£ 150.00 (ex. VAT) 1 in stock

Axminster AWEDE2 Hobby Series Extraction Unit

ITEM-35983

Axminster AWEDE2 Hobby Series Extraction Unit

This was removed from a university workshop where it was surplus to requirements.

The unit powers up and is in working order.

£ 150.00 (ex. VAT) 1 in stock

MBO Mobile Air Conditioner MA88001 KY-20

ITEM-31479

MBO Mobile Air Conditioner

Model: MA88001 KY-20

This item was removed from a university where it was surplus to requirement.

The unit powers on and is in working order, with the air flow functioning as expected. It has a temperature range of 16˚C - 30˚C.

The item is in reasonable, used cosmetic condition.

£ 150.00 (ex. VAT) 1 in stock

Heraeus Benchtop Laboratory Incubator Type - B 5060 EK-CO2 Lab

ITEM-28140

This Heraeus Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been tested with a digital thermometer (not included) at 5% CO2.

The temperature was first set to 37°c, it took around two hours to reach.

The temperature was then set to its max of 50°c but it only reached as high as 43.7˚c on the thermometer after running for nearly 6 hours.

Our external CO2 Gauge only registered 3.8% CO2 while it was running.

Internal dimensions - D57 W60 H60.5cm

6 x Shelves - 51 x 27cm

£ 150.00 (ex. VAT) 1 in stock

Xerox VersaLink C7025 Colour Multifunction Printer Copier

ITEM-42188

Xerox VersaLink C7025 Colour Multifunction Printer Copier

This system was removed from a university lab where it was surplus to requirements.

The unit is in very good cosmetic condition and in full working order. Both black and white, as well as colour copies, were successfully made with clear prints. All drum and colour cartridges are registered with at least 34% capacity remaining.

Serial No.: 3393037872

£ 150.00 (ex. VAT) 1 in stock

Benchmark MyTemp H2200-H Digital Incubator Lab

ITEM-45012

Benchmark MyTemp H2200-H Digital Incubator

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition.

The unit has been tested for its heating functionality and appears to be in good working order (thermometer not included).

Specifications:

Model: H2200-H
Serial No.: 06236519

£ 145.00 (ex. VAT) 1 in stock

Jouan A-14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor Lab

ITEM-20120

This Jouan A14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but it has some light stains on the lid and side panels. The Interior and rotor are clean.

The rotor has 20 sample spaces, it accepts 2ml vials. It is rated at 14000rpm.

It powers up fine and has been tested at a few different speeds. The numbers don't necessarily match up with the RPM of the unit.

Set at 3, the centrifuge hit 5800 RPM.

Set to 9, the centrifuge hit 11500 RPM.

Set to max of 14000, the centrifuge hit 14200 RPM.

£ 145.00 (ex. VAT) 1 in stock

Corning Dispersion Compensator Module Model DCM-C-040-SP Lab

ITEM-25659

This Corning Dispersion Compensator Module Model DCM-C-040-SP was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with marks from use.

No PSU was supplied with it so we were unable to test it.

2x Optical cables

Part Nos.

APC-1J-005

Model DCM-C-040-SP

Dispersion: 685ps/nm

Attenuation: 5.23dB

£ 145.00 (ex. VAT) 1 in stock

THOMAS Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump Lab

ITEM-18929

This THOMAS Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump was removed from a university lab where it was surplus to requirements.

It is in reasonable cosmetic condition but has some stains and marks from use.

It has not been tested as it has an unusual power connector which we do not have an adapter for.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 145.00 (ex. VAT) 1 in stock

Heraeus Biofuge Pico Centrifuge with 3324 Rotor Lab

ITEM-25991

This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly.

The unit was tested at the max speed of 13000rpm and ran smoothly.

The unit has the following rotor fitted;

Heraeus Rotor #3324

•PP1/96

•Max Speed 13000rpm

• Max load 24x4g

•24x 2.0 flat cap tube holders.

No further testing done.

NEW ITEM

£ 145.00 (ex. VAT) 1 in stock

6 x Nest BioFactory 10 Chambers Wide Mouth 771302 Lab

ITEM-36929

Nest BioFactory 10 Chambers Wide Mouth 771302

This was removed from a university lab where it was surplus to requirements.Nest BioFactory 10 Chambers Wide Mouth

No. 771302

Qty - 1/Pack, 6/Cases

Expiry 2025

They are brand new and sealed, the box was only opened to check inside.

£ 145.00 (ex. VAT) 1 in stock

Union Carbide Liquid Nitrogen Refrigerator Tank/Dewar & Trolley Lab

ITEM-18512

This Union Carbide Liquid Nitrogen Refrigerator Tank/Dewar & Trolley was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition but is covered in peeling stickers. It has not been tested.

£ 145.00 (ex. VAT) 1 in stock

Thomas Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump

ITEM-19016

This Thomas Gardner Denver 2750TGHI52/48-221E Compressor Vacuum Pump was removed from a university lab where it was surplus to requirements.

The unit sounds like it powers up but has no power indicator on it. The fan blades however do now spin. It has not been tested.

It is in good cosmetic condition with very limited marks from use.

£ 145.00 (ex. VAT) 1 in stock

Beckman 166 Detector Lamp Replacement Deuterium Lamp Kit - P/N: 538706

ITEM-27672

Beckman 166 Detector Lamp Replacement Deuterium Lamp Kit - P/N: 538706

This was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition. It is very clean with no marks or scratches.

There was no information given to indicate how the lamp has run for, or if it has at all. It hasn't been tested with any of our equipment.

Also included are the following:

1x Installation Guide

2x Washers

1x Spring

£ 145.00 (ex. VAT) 1 in stock

Spectra Physics 2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box Lab

ITEM-23507

Spectra Physics 2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box

This system was removed from a university lab where it was surplus to requirements.

Included are;

1 x Spectra Physics Laser Model 2025-45

The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location.

1 x Spectra Physics Power supply Model 2560

We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys.

1 x Spectra Physics Control Box Model 2270

The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.

£ 145.00 (ex. VAT) 1 in stock

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets Lab

ITEM-23407

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets

These were removed from a university lab where they were surplus to requirements.

They are in good cosmetic condition but have some marks from use.

£ 145.00 (ex. VAT) 1 in stock

LDC Analytical HPLC Membrane Degasser Lab

ITEM-30005

This LDC Analytical HPLC Membrane Degasser was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in reasonable cosmetic condition with some marks and stains.

NEW ITEM

£ 140.00 (ex. VAT) 1 in stock

Teknomek Stainless Steel Lectern with Double Undershelf

ITEM-36693

Teknomek Stainless Steel Lectern with Double Undershelf

This was removed from a university lab where it was surplus to requirements.

It is brand new and unused.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Width: 600mm
Depth: 400mm
Height: 1000mm
Floor clearance: 175mm

£ 140.00 (ex. VAT) 1 in stock

Prior HBO 100 J0470 Microscope Lamp Power Supply Lab

ITEM-30535

This Prior HBO 100 J0470 Microscope Lamp Power Supply was removed from a university lab where it was surplus to requirements.

The item powers on and is in a reasonable, used cosmetic condition. We have not tested it further at our facility.

£ 140.00 (ex. VAT) 1 in stock

Lec Technical Lab Freezer ISU55 Laboratory

ITEM-35142

Lec Technical Lab Freezer ISU55 Laboratory

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included) to -25˚C. It is in good working order and good cosmetic condition with minor marks from use.

2 Shelves - 42 x 37cm

£ 140.00 (ex. VAT) 1 in stock

Anrtisu Portable STM-16 Analyzer Model MP1656A Lab

ITEM-25640

This Anrtisu Portable STM-16 Analyzer Model MP1656A was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some tape marks around the unit from general use.

The fan started up almost immediately after powering on the unit and all buttons appear to be responsive.

With it is;

1 x IDEC Key: Mod No. 132

£ 140.00 (ex. VAT) 1 in stock

Electromantle MA Heating Mantile Solid State Stirrer EMA 0500/CE MK1 Lab

ITEM-24935

This was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. There are scratches and stains on its surface.

The item powered on without issue. The magnetic stirrer works as intended.

When set to 3 on the dial the thermometer measured 58.0˚C.

When set to 6 on the dial the thermometer measured 92.5˚C.

When set to 10 on the dial the thermometer measured 282.9˚C.

£ 140.00 (ex. VAT) 1 in stock

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-GRN

ITEM-31955

This Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-GRN was removed from a university lab where it was surplus to requirements.

The item powers on with UV light working.

The item is in a reasonable, used cosmetic condition.

£ 140.00 (ex. VAT) 1 in stock

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-WHT

ITEM-31956

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The item powers on with UV light working.

The item is in a reasonable, used cosmetic condition.

£ 140.00 (ex. VAT) 1 in stock

Buchi GKR-50 Glass Tube Drying Oven Lab

ITEM-24338

This Buchi GKR-50 Glass Tube Drying Oven was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included).

We set the temperature to around 37˚c on the dial and the thermometer went up to 35˚c. We then turned it up to 100˚c, and the thermometer read 80˚c, finally, we turned it up to 200˚c and the thermometer reached 167˚c.

It is in reasonably poor cosmetic condition and has lots of marks from use as well as rust.

£ 140.00 (ex. VAT) 1 in stock

MJ Research Programmable Thermal Cycler Model: PTC-100 Lab

ITEM-24885

This MJ Research Programmable Thermal Cycler Model: PTC-100 was removed from a university lab where it was surplus to requirements.

It is in reasonable cosmetic condition with some marks from use.

It powers up and is working. It was tested with a digital thermometer (not included).

When set to 37 the display showed 37˚C and the thermometer measured 35.6˚C.

When set to 100 the display showed 100˚C and the thermometer measured 99.5˚C.

It has a 96 well block that fits 0.1ml tubes.

£ 140.00 (ex. VAT) 1 in stock

Millipore Milli-Q Synthesis Water Purification System Cat no. ZMQS5VF01 Lab

ITEM-24444

Millipore Milli-Q Synthesis Water Purification System Cat no. ZMQS5VF01

This was removed from a university lab where it was surplus to requirements.

The item powers on but displays system errors 4 & 7 with service and alarm lights flashing. We were unable to test it any further.

The item is in a reasonable, used cosmetic condition.

NEW ITEM

£ POA 4 in stock

Box of Hamilton CO-RE Tips - 8 x 480 1000ul Tips 235905 with Filters Lab

ITEM-27589

Box of Hamilton CO-RE Tips

8 x 480 High Volume Tips (1000ul) with Filters

REF - 235905

The box is sealed

This was removed from a university lab where it was surplus to requirements.

£ 135.00 (ex. VAT) 1 in stock

13 x Extreme Network Summit 48Si Fast Port Ethernet Switches 15601 48 Port Lab

ITEM-30313

13 x Extreme Network Summit 48Si Fast Port Ethernet Switches

These were removed from a university lab where they were surplus to requirements.

Model 15601

No. of Ports 48

Individual Dims:

L44cm x W44cm x H5cm

The units all power on are in good cosmetic condition, there are some surface and scratch marks from general use. 8 out of 13 have mount brackets

The fans are all working and can be heard almost immediately when powering up.

9x Switches have single power inputs

Part Nos.

9x 800099-03-05

£ 135.00 (ex. VAT) 1 in stock

Vintage Six Drawer Industrial Filing Cabinet

ITEM-35711

Vintage Six Drawer Industrial Filing Cabinet

This was removed from a university engineering lab. It was surplus to requirements.

The unit is in reasonable cosmetic condition but has quite a bit of rust on it. It would make for a good upcycling project.

It measures 30x29x99cm LWH

6 drawers each measuring: Wx23Dx13Lx38

NEW ITEM

£ 135.00 (ex. VAT) 5 in stock

Millipore Millistak+ HC Pod Depth Filter DOHC MD0HC05FS1 0.55sq.m Lab

ITEM-31082

Millipore Millistak+ HC Pod Depth Filter DOHC MD0HC05FS1 0.55sq.m

This was removed from a lab where it was surplus to requirements.

The unit is brand new and sealed.

NEW ITEM

£ 135.00 (ex. VAT) 1 in stock

2 x Waters Probe Assembly Tips with O-Ring PLCZ PN - 700000337 Lab

ITEM-18777

2 x Waters Probe Assembly Tips with O-Ring PLCZ PN - 700000337

These were removed from a university lab where they were surplus to requirements.

They appear to be brand new but the boxes have been opened.

£ 135.00 (ex. VAT) 1 in stock

New Brunswick Scientific Bio Flo 110 Peristaltic Pump for Fermentation System

ITEM-25354

This New Brunswick Scientific Bio Flo 110 Peristaltic Pump for Fermentation System was removed from a university lab where it was surplus to requirements.

The unit powers up and all 4 pump heads turn.

It is in reasonably good cosmetic condition with marks and stains.

£ 135.00 (ex. VAT) 1 in stock

KNF N022.AN.18 Diaphragm Vacuum Pump Lab

ITEM-34965

This KNF N022.AN.18 Diaphragm Vacuum Pump was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

It is in good cosmetic condition with marks from use.

£ 135.00 (ex. VAT) 1 in stock

Avenex Powerform DCM Fiber Module Part Number. 0313063001 Lab

ITEM-25667

This Avenex Powerform DCM Fiber Module Part Nbr. 0313063001 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and there are some tape and scratch marks from general use.

We were unable to test it.

Dispersion: @ 1545nm -1646ps/nm

Loss: 6.2dB

£ 135.00 (ex. VAT) 1 in stock

Infors HT Benchtop Laboratory Platform Shaker Model: TR-I25 Lab

ITEM-24944

This Infors HT Benchtop Laboratory Platform Shaker Model: TR-I25 was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition but has some signs of heavy use.

The item powers on but the LCD screen has difficulty displaying the first number, however, it is still readable. It was set to 410 rpm which it achieved.