BD FACSCalibur Flow Cytometer

This was removed from a university lab where it was surplus to requirements.

The unit has a main board issue and is sold for spares/repairs

Airwolf 3D NW3D HDX 3-D Printer Lab

This item was removed from a university where it was surplus to requirement.

The back panel is missing and, the wires are exposed, resulting in a visual PAT fail.

Due to the condition stated above, this item is listed as Spares/Repair.

Also included are the following:

• Power lead
• Data cable

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-39808 MSE Centaur 2

ITEM-39805 Sorval TC6

ITEM-39837 Sartorius BP 11

ITEM-35985 Micromeritics sedigraph 5100

ITEM-35986 Ibm personal system 2 model 30 [condition: Used]

ITEM-35987 Epson FX-850 [condition: Used]

ITEM-35990 IBM Personal system 2 monochrome display [condition: Used]

ITEM-35991 Techne Genius [condition: Used]

ITEM-38936 Howe GyroVap [condition: Used]

ITEM-36540 Sartorius Startoclear Depth Filter Maxicaps [condition: Used]

ITEM-39844 MJ Research DNA Engine Tetrad 2 PTC Peltier Thermal Cycler Lab [condition: Used]

ITEM-38938 Heraeus Rotor & Buckets [condition: Used]

ITEM-38939 3Com baseline Switch 2816 [condition: Used]

ITEM-37437 Cryofusion Liquid CO2 Back up system [condition: Used]

ITEM-37441 UVP UV/White Convertor Plate [condition: Used]

ITEM-36544 IKA Vibrax VXR [condition: Used]

ITEM-36552 Bruker BSPS 12 80 2 WS1212316

ITEM-36554 Philips CD650 CD player [condition: Used]

ITEM-36005 Invitrogen E-Gel iBase Safe Imager + iBase [condition: Used]

ITEM-18758 BOC Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm Valve Lab [condition: New]

ITEM-36008 Milli-Q Q pod [condition: Used]

ITEM-39860 Capp CR-MI1

ITEM-39861 Ohaus Pioneer pa2102cm

ITEM-39865 Bio Rad Benchmark Plus

ITEM-39866 Grant FH16-D

ITEM-39867 Gilson 305 Pump

ITEM-39868 Sartorius BP 3100S

ITEM-39869 Sartorius 1212 MP

ITEM-39870 Restek Electronic Flow Calibrator

ITEM-36014 Box of Thermo Fisher HPLC Parts [condition: Used]

ITEM-36015 Security guard hplc guard cartridge system [condition: Used]

ITEM-36016 Lot of PCR equipment [condition: Used]

ITEM-36017 2 x GelBond PAG Film [condition: Used]

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

Formulatrix Tempest V.2 Liquid Handler with Pumping Box

This item was removed from a university laboratory where it was surplus to requirements.

The liquid handler and pump box are in good cosmetic condition, and power on.

The previous client has reported that the system is not in working order, as it requires a PF shared control valve (Mantis CF solenoid).

Due to the client's statement, this system is listed as Spares/Repair.

Software and a compatible computer are required for operation.

Components:

• Formulatrix Tempest V.2
• Serial No.: 0117
• Pump Box V2.1
• Serial No.: 0169

Includes:

• 18 x Silicone Nozzle Strip-HV 0.35mm (PN: 207459_A)
• 7 x Silicone Nozzle Strip-HV 0.15mm (PN: 204694)
• 7 x Low Volume Silicone Chips (Volume 1 µL & 0.2 µL)
• 1 x High Volume Silicone Chip (Volume 5 µL & 1 µL)
• Tube connectors
• 2 x Holders

Qiagen Bio Robot 8000

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and powers on.

However, it displays errors during initialization (Z Motor 6: movement blocked, Code:8008 and Z Motor 8: movement blocked, Code:8008), preventing the robot from homing.

The lab reported that all components work except for one or more dilutor units in the syringe pump system, which Qiagen can no longer supply.

Therefore, this system is listed as Spares/Repair.

Included:

• Qiagen Bio Robot 8000
• Dell Control PC running Windows 7 with QIAsoft 4.1.4.5 software (discs included)
• Keyboard, monitor, and mouse
• Pump system
• Box containing various spare parts and consumables

Pair of Horizon Collators MC-8 MC-8a and MC-8m

These were removed from a university lab where they were surplus to requirements.

Bot units are in reasonably good cosmetic condition and power on, but due to sustained damage, they are not fully operable and therefore, listed as Spares/Repair.

The damage sustained is as follows:

Part 1:

The front intake has completely broken off, with the back tray significantly buckled.

Part 2:

The rear of the device has sustained severe damage or deformation as a result of mishandling or being dropped.

The plugs have since been removed after testing the 32AMP.

RS Biotech Galaxy R+ Incubator Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included).

We were unable to set the temperature to the MAX due to it having a faulty display, therefore it is listed as Spares/Repair.

It is in reasonably good cosmetic condition, although the motor at the back of the incubator is producing a continuous buzzing sound and the screen is very dark, which may indicate a faulty backlight.

This item also includes the following:

9 x Metal containers with glass lids and bases.

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

MSE Mistral 3000I Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has issues running. It initially ran, but then went into a 160rpm limp mode.

It is sold for spares/repairs.

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and works, but the door mechanism is broken, and the door will not remain closed.

It is sold for spares/repairs.

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

• 3 shelves (47 x 43 cm)
• Manuals
• Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

Beckman Coulter DelsaMax Pro Laser Photometer

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and power on, we are unable to conduct further testing at our facility.

We have been told that the DLS can't be repaired as part for the laser that is broken is now no longer sold.

For this reason it it sold for spares/repairs

Specifications:

• Model: DelsaMax PRO
• S/N: 3183-DMP

Multi Job Lot Mixed Items

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

ITEM-35225 Mareno 3000 Induction Hob

ITEM-35204 Alpha Innotech TM-26 UV Transilluminator Lab Equipment

ITEM-35292 Buchi Rotavapor R II R-II Rotary Evaporator

ITEM-30017 Kent Scientific Isometric Transducer Lab

ITEM-35279 Mettler AT200 Precision Balance

ITEM-35191 Razel A-99 Variable Speed Syringe Pump

ITEM-38692 YSI Model 95 Dissolved Oxygen Meter with Probe

ITEM-37912 YSI 550 DO Handheld Dissolved Oxygen Meter With Probe

ITEM-37913 YSI 55 Handheld Dissolved Oxygen Meter With Probe

ITEM-35198 Thermo Scientific Multidrop 384 Type 832 Microplate Dispenser Lab

ITEM-29975 Pack of 5 - Edwards Odour Elements for EMF20 Oil Mist Filter 22304077

ITEM-35298 Carl Zeiss HBO 100 W VHC 100W Lamp Power Supply

ITEM-29970 Taylor-Wharton 10LD Liquid Nitrogen Dewar Tank Lab

ITEM-15840 Sokkia / Sokkisha DT6 Digital Theodolite Level for Surveying & Setting Lab

ITEM-17222 Marconi Instruments LTD Oscillator TF1247

ITEM-17268 Additive Layer Manufacturing RapMan 3 3D Printer BL-B

ITEM-35334 Thermo Scientific ARKTIK 5020 Thermal Cycler Dual Block Lab

ITEM-23962 Lot of 3 x 3M Digital Projectors - 2 x X40 and 1 x X66

Whitley VA500 Hypoxia Glove Box Workstation / Airlock with Foot Pedal

This item was removed from a university lab where it was surplus to requirements.

The glovebox and airlock are in very good cosmetic condition and powered on successfully.

However, the temperature control display on the glovebox is non-functional.

Therefore, further testing (i.e temperature testing) could not be conducted, and it is listed as Spares/Repair.

Details:

• Glovebox Serial No.: VA01TF
• Airlock Serial No.: AV01TF

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonable, used cosmetic condition.

The centrifuge was tested at a high spin rate and achieved approximately 1650rpm. Temperature control tests were performed; the system failed to reach the set temperatures of -20˚C and 37˚C, only stabilizing around 20˚C.

Due to the temperature faults experienced during testing, this item is listed as Spares/Repair.

Includes:

• Cart/stand: Dimensions L78 x W70 x H73 cm
• 4 x swinging buckets
• 2 x adaptors for 12 x 15ml tubes each
• 2 x adaptors for 50 x 0.5ml tubes each
• 2 x adaptors for 32 x 1.5ml tubes each (PN-10-5043)

Specifications.

• Model: HT4 Series 2
• Serial No.: 5794

This system does not include a vacuum pump.

Beckman Coulter SMS Sheath Maintenance Unit

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but does not power on.

Therefore, it is listed as Spares/Repair.

Specifications:-

• Model: SMS Unit
• S/N: 739

Roche LightCycler 480 II/96 PCR Real-Time Thermal Cycler

This item was removed from a university where it was surplus to requirements.

The unit powers on and is in good used cosmetic condition.

During setup with software, the unit failed to initialise, displaying the following errors:

• Error 100900270: Restart instrument, inform Roche service.
• Warning 100600130: Command not allowed.

Due to the errors faced when tested, this item is listed as Spares/Repair.

Specifications:

• Excitation Filters Installed:
• 440, 465, 498, 533, 618
• Emission Filters Installed:
• 488, 510, 580, 610, 640, 660
• Xenon Lamp:
• Absolute Intensity: 9012
• Operation Time: 865 hours
• Block Type: 384 Silver Block

Perkin Elmer HS 40XL Headspace Sampler Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. However, the display screen is not functional, preventing further testing.

Therefore, it is listed as Spares/Repair.

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

ITEM-06051 Glass Fiber Filters

ITEM-06367 2 Boxes PP Deepwell Plates

ITEM-06378 Box of Bio-Rad Rehydration Trays

ITEM-11176 2x Laboratory Glass Beakers Lab Equipment

ITEM-11177 Corning 250 mL Polycarbonate Erlenmeyer Flask with Vent Cap

ITEM-11929 Lot of Small Glass Sample Bottles

ITEM-15584 Desiccator & Spare Lid

ITEM-37221 Thermo Scientific 8179 Rotor & Buckets

ITEM-37233 12 x Kendro Sorvall Tube bottle Adaptors

ITEM-37234 Mix of Small Glassware

ITEM-37235 Box of Hybaid Glass Tubes

ITEM-37236 Box of Gilson consumables

ITEM-37256 UVP Mineralight lamp

ITEM-37257 3uv Transilluminator

ITEM-37258 Sunavo Single burner

ITEM-45225 Box of Generic white small packaging boxes

ITEM-45229 2x Tripp-lite Isobar

ITEM-45232 Mitsibishi P95 Printer

ITEM-45246 Various carousels

ITEM-45247 APC Back Ups ES 700

ITEM-45250 tubes

ITEM-45253 2x Lightboxes

ITEM-45386 ITESanyo ABC-VW24A Air Purifier

ITEM-45399 F-300 Impulse heat sealer

ITEM-45400 DarkReader Transilluminator

ITEM-45401 MX-T6-S Roller Mixer

ITEM-45402 Fisons WhirliMixer

ITEM-45563 Heidolph MR 3001 K

ITEM-45565 Fisher Scientific DP2000

ITEM-45566 Capex 2DC

ITEM-45567 iBlot Invitrogen

ITEM-45568 Eppendorf Centrifuge 5415 D

ITEM-45569 AnalyTikjena UVP Visi-Blue Transilluminator

ITEM-45570 Kodak Coldlight Illuminator Series 2

ITEM-45572 Heraeus Biofuge Fresco

ITEM-45573 IKA KS501 Digital

BD FACSCalibur Flow Cytometer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition but has not been in use for many years; therefore, it likely is not in working order.

Due to restrictions on operating lasers at our site, we are unable to test the item.

As we are unable to test the item and its likely non-functional status, it is listed as Spares/Repair.

The power supply is not included.

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

The item powers on and is in a reasonable used cosmetic condition.

It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom.

During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.

Therefore, it is listed as Spares/Repair and no further testing was conducted.

Specifications:

• Model: U570 -86
• Serial No.: 1004-5204-1103

This was removed from a university lab where it was surplus to requirements.

The unit does not power up.

It is sold for spares/repairs

Leica CM3050 S Cryostat

This item was removed from a university laboratory where it was surplus to requirements.

The cryostat powers on and is in good cosmetic condition. However, it has failed PAT testing due to a cable defect. Therefore, it is listed as Spares/Repair.

The system was also part of a product recall due to improper labelling so can only be used for parts.

It is equipped with multiple varied-sized cutting blades and a foot pedal.

Specifications:

• Settable Temperature: -10°C to -50°C (+/-3 K)
• Model: CM3050
• Serial No.: 3217/07.2002

Caleva Model 8ST Tablet Dissolution Tester

This item was removed from a university laboratory where it was surplus to requirements.

The item powers on but has operational issues: 

• Reaches a maximum RPM of 500, but the spindles experience issues with slowing down or stopping intermittently.
• 2 x Spindles not included.

Therefore, it is sold as Spares/Repair and would require repair before attempted use.