Zeiss LSM 710 Confocal Laser Scan Head Quasar 3CH Microscopy Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

It was removed from a working Zeiss LSM System.

Last Service Date: 2020

Includes;

• DVS PCi card for use in a RTPC.
• Various Connecting Cables

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

• 1 Shelf: 74 x 58 cm
• 2 Baskets: 57 x 30 x 15 cm
• Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

Life Technologies Ion Torrent System - Proton Semiconductor Sequencer & Ion Chef

This system was removed from a university where it was surplus to requirements.

All included units are in good cosmetic condition and power on, we are unable to test them further or as a system at our facility.

The previous owner stated it was in working order when last in use.

System includes;

Ion Torrent Proton Semiconductor Sequencer

• Model - Proton Semiconductor Sequencer
• S/N - 245644-0717

Comes with Ion Torrent P1 - DA003572

Ion Torrent Ion Chef Instrument

• Model - IONCHEF
• S/N - CHEF00212

Ion Torrent Ion OneTouch 2

• Model - Ion OneTouch 2 Instrument
• S/N - 2456450-2447

Ion Torrent Ion Touch ES

• Model - 8441-21
• S/N - 423928

Ion Torrent Ion Chip Minifuge

• Model - Ion Torrent Ion Chip Minifuge
• S/N - 1212 0929

Accessories

• Dell PowerEdge T620 Server
• 3 x wash bottles
• Honeywell Scanner
• 2 x Ion Chip 316

Infors HT Minitron Co2 Shaking Incubator w/ Humidity (2018)  

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in complete working order

Holmarc Opto-Mechatronics Spray Pyrolysis Equipment Model HO-TH-04N

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the heated plate was successfully tested, reaching a maximum temperature of 500˚C. No further functional testing was conducted.

In reasonable cosmetic condition, with some tape residue present around the casing.

Includes:

• Integrated Holmarc Spray Pyrolysis Controller
• Serial No.: HSMC104
• (Powers on via internal socket)
• Airsa Model AFP11-3D Fan (not fitted)
• Metal part labelled 'Container' (connects to left side of unit)
• Glass chamber with pump fittings (rust present on metal parts)
• Blue hosing

Model: HO-TH-04N

AKTA Purifier System with pH/C-900, UV-900, P-900, Box-900, and Frac-900

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear. No further functional testing has been conducted.

The system comprises the following modules:

• AKTA Purifier
• Serial No.: 56303327 KD 001769
• System No.: 18140000 001654

• pH/C-900
• Model: pH/C-900
• Serial No.: 56118981 KD 003619

• UV-900
• Model: UV-900
• Serial No.: 56119689 KD 003743

• P-900
• Model: P-900
• Serial No.: 56600001 KN 002409

• Frac-900
• Model: Frac-900
• Serial No.: 56303949 KD 004222

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

This enclosure was removed from a university where it was surplus to requirement.

This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram.

It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included.

The measurements for the assembled enclosure are as follows:

Length x 448cm

Width x 152cm

Height x 118cm

This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

Wyatt Technology DynaPro DP-TH-01 Titan & DP-AMB-01 Microsampler

This system was removed from a university lab where it was surplus to requirements.

Both units are in good cosmetic condition and power up.

However, full functionality testing requires connecting to a PC with specific software, which is not included.

The previous owner has stated it was in good working order prior to removal.

Includes:

• USB cable
• DVI cable

Model Numbers:

• Titan: DP-TH-01
• Serial Number: 111-DPTH
• Laser Power (mW): 60
• Wavelength (nm): 828.98

• Microsampler: DP-AMB-01
• Serial Number: 104-DPAMB

Hudson Solo SOL9 Liquid Handler

This item was removed from a university lab where it was surplus to requirements.

The robot is in very good used condition and has been successfully tested for communication with the included

software.

The previous client has confirmed it being in working order.

System Includes:

• 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU)
• 4 x 10cm Tall Nests
• 2 x 6cm Tall Nests
• 1 x 4.5cm Nest
• 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units:
• 1 with a TPS 620-5033 plate
• 1 with a TPS 620-5045 plate
• 2 x PSU's
• 1 x BioShake Heated Shaker Plate (marked as faulty)
• 2 x Boxes of 1000ul Pipette Tips (all sealed inside)
• 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed
• 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Luminex Magpix Microplate Reader w/ Software & Manuals Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in good working order prior to removal.

Includes;

Accessories

• 2 x 8x9 well plate
• 1 x DataLogic Gryphon
• 1 x Datashur USB 32Gb (Password locked)

Software

• 1 x Luminex xPONENT 4.2 Software for MAGPIX
• 2 x Luminex MAGPIX Verification Kit
• 1 x Luminex MAGPIX Calibration Kit
• 3 x Luminex MAGPIX Verification Kit (Mini CD)
• 1 x Luminex MAGPIX Calibration Kit (Mini CD)

Manuals

• Luminex xPONENT for MAGPIX 4.2 Software User Manual
• Luminex xPONENT for MAGPIX Quick Guide

Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

GE Healthcare ÄKTA System with Workstation and Software

This system was removed from a university laboratory where it was surplus to requirements.

All units are in good cosmetic condition and power on, we are unable to test the system further at our facility.

The Lenovo Thinkstation PC has Unicorn 5.01 and MassLynx V4.2 software installed and functioning correctly.

The system comprises the following:

Amersham Biosciences UV-900

Model: UV-900

Serial No.: 01148619

Amersham Biosciences P-900

Model: P-900

Serial No.: 01146904

Amersham Biosciences INV-907

Code No.: 18-1108-40

Serial No.: 01147887

Amersham Biosciences M-925

Code No.: 18-1118-89

Serial No.: 01146475

Amersham Biosciences CU-950

Serial No.: 2448

Lenovo Thinkstation PC with:

Unicorn 5.01

MassLynx V4.2

Keys included

NEC 17" Monitor

NEC Keyboard and Mouse

Amersham Biosciences pH/C-900 Monitor (Passed calibration)

Mettler Toledo Garvens 2 VS Checkweigher

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Melles Griot Anti-Vibration Isolation Table with 4 Isolating Legs Lx244 Wx126 Hx91

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and remains untested.

Includes:

• 4 x Melles Griot Isolating Legs, Part No. 070T1055

Specifications:

• Dimensions: Lx244 Wx126 Hx91 cm
• Measurement: Imperial

Please note: Sockets and 3-phase cable/plug shown in the first two images are not fitted or included.

Thermo S4 S Series AA Spectrometer System, with VP 100 and ASX-520

This was removed from a university lab where it was surplus to requirement.

All elements of the system power up and are in reasonably good cosmetic condition with minor marks. The lab confirmed it was in working order when last used.

Included are;

1x Thermo S Series AA Spectrometer

P/N: 9423 400 30041

S/N: GE711747

1x Thermo VP 100 Vapour System

P/N: 9423 460 10001

S/N: GE 604091

1x Cetac ASX-520 Auto Sampler

S/N: 100520A520

Thermo S4 Atomic Absorption Spectrometer Package w/ Bulbs Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on but could not be tested further.

It is in good cosmetic condition, however, 3 out of 6 plastic clips for the bulbs snapped.

Includes:

• Operators manual
• Various parts and accessories
• Various bulbs:
• Thermo K 8mA
• Thermo NaK 8mA
• Thermo Mn/Nl/Fe 10mA
• Thermo Cu/Mn/Zn 10mA
• Thermo Na 8mA
• Thermo Ca/Mg/Si 15mA
• Thermo P 10mA
• Visimax I Hollow Cathode Lamps Cd
• Visimax I Hollow Cathode Lamps Cr/Fe/Mn/Ni
• Visimax I Hollow Cathode Lamps Ca/Mg/Al
• Instrumentation Laboratory SEN 1.6 20632-02
• Instrumentation Laboratory Zn 87267
• Instrumentation Laboratory Ca/Mg 87297
• Instrumentation Laboratory Fe 87225
• Instrumentation Laboratory Ni 87235
• Instrumentation Laboratory Mn 87231
• Instrumentation Laboratory Mo 87233
• Instrumentation Laboratory Fb 87227

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

ForTest Model T8060 Standard Level Differential Leak Tester Lab

This item was removed from a facility where it was surplus to requirement.

The unit appears to be in as-new condition and is supplied in the original box (opened), with the protective plastic covers still in place on the screen. The item has been powered on, however no further testing has been conducted.

Comes with:

• ForTest Model T8060 Standard Level Differential Leak Tester
• Original box (opened)
• Sealed envelope containing USB information
• USB serial cable
• 2 x connectors

Shimadzu IRAffinity-1S Infrared Spectrophotometer

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, with the front-status indicator light functioning correctly. The system could not be tested further as no software is included. No additional testing has been carried out.

Model: IRAffinity-1S

Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor System

This system was removed from a facility where it was surplus to requirements.

All components are in good used cosmetic condition.

The system comprises a benchtop bioreactor controller, vessel, weighing platform, and data recording unit, supplied with a manual.

Includes:

• Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor Controller
• Cytiva Xcellerex XDR-10
• Mettler Toledo PBA655-B60 Weighing Platform
• JUMO Logoscreen 600
• Manual

In good used cosmetic condition.

The lab confirmed that the system was in good working order prior to removal.

Cryomagnetics Inc 12T Horizontal Superconducting Magnet with CS-4 & LM-500

This system was removed from a university laboratory where it was surplus to requirements.

It is a 12T horizontal superconducting magnet with a 120mm diameter bore. The magnet features a high homogeneity central region, previously used for FT-ICR mass spectrometry measurements, and is also suitable for small-scale MRI applications. It is actively shielded with a low fringe field and incorporates a liquid helium cooled coil with an outer liquid nitrogen shield dewar.

The previous owner stated it is in full working order. The system has been refilled and maintained continuously over its lifetime with no issues and no quenches outside of training during charging.

Please note; The weight (2500kg) is approximate.

Includes:

• Magnet, discharged state (run down in 2023), flushed with nitrogen gas
• Manufactured ~2009, installed at university by Cryomagnetics soon after
• Run down and moved once in ~2010
• Insulation under vacuum
• All seals and burst discs intact and ready to use
• Instruction manual (paper)
• Cryomagnetics Inc Model CS-4 Bipolar Superconducting Magnet Power Supply 115v (Serial No: 3166)
• Cryomagnetics Model 4G Superconducting Magnet Power Supply Operating Instruction Manual for the 4G Magnet Power Supply
• Cryomagnetics Inc Liquid Cryogen Level Monitor Model LM-500 (Serial No: 3742)

MVE TEC 3000 800 Series -190°C Cryogenic Freezer with Controller

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. No further testing was possible as it requires liquid nitrogen to operate.

Includes:

• Step access platform
• MVE TEC 3000 guidance manual
• 12 x internal storage racks (each approximately 14 cm (L) x 14 cm (W) x 87 cm (H))

Model: TEC 3000

Temperature Range: Down to -190°C

Priorclave PS/MID/C60 Top-Loading Autoclave

This autoclave was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. The previous owner has stated it was in good working order prior to removal.

Includes:

• Key

This system was removed from a lab as it was no longer required.

It was in full working order prior to removal from the lab.

An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber.

Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again.

Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II.

The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k.

We have not removed any parts from the system whatsoever.

Gilson 268 PIPETMAX Automated Pipetting System (MAX8x200) with Dell Tablet & Dock

This system was removed from a facility where it was surplus to requirements.

The robot is able to run a full protocol successfully and appears to be in working order.

Please note: the Dell Latitude 10 tablet is in poor condition. The screen is badly damaged but remains usable, and the battery is dead, so the tablet must be used while connected to the docking station.

• Pipetting Head: MAX8x200

No further testing has been carried out at our facility.

Included Components:

• Gilson 268 PIPETMAX liquid handler with MAX8x200 pipetting head
• Dell Latitude 10 (ST2e) tablet (Trilution installed; screen damaged; battery dead)
• Dell Latitude 10 docking station + PSU
• PSU for the PIPETMAX
• 2 x USB cables
• Gilson 32000274 bin, tip disposal (annealed)
• PIPETMAX tip reload block
• 96x new PIPETMAX tips
• Paperwork incl. Declaration of Conformity + Certification of Validation (software)
• PIPETMAX 268 setup guide

BD Accuri C6 Plus Flow Cytometer System w/ Cleaning/Waste Bottles & Accessories

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further due to restriction with testing Class 3+ lasers at our facility.

The previous owner stated it was in working order prior to removal.

Includes;

• USB-Serial Cable
• 1x Box of BDFACSClean (340345)
• Bottles marked A,B,C,D, 2x 24 Tube Holders
• 2x Boxes of BD Sheath Additive
• 1x BD Extended Flow Cell Clean Solution
• 1x BD Detergent Solution Concentrate
• 1x Open Bag of 125 Falcon Polystyrene Round-Bottom Tubes
• 1x Syringe and Holder

Stainless Steel Vacuum Chamber Assembly & Flanged CF/ISO Vacuum UHV

This lot was removed from a facility where it was surplus to requirement.

This lot comprises a collection of high-quality stainless steel vacuum components, including a large multi-port vacuum chamber body, multiple cylindrical sections, blanking plates, and various flanged fittings.

These components are typically used in high-vacuum or ultra-high vacuum (UHV) systems for applications such as thin film deposition, materials research, plasma systems, or particle physics experiments. The chamber features multiple ports for instrumentation, feedthroughs, and viewports, and appears to be manufactured to a high standard with precision-machined flanges.

Included Components:

• Large stainless steel multi-port vacuum chamber body
• Multiple cylindrical vacuum sections/extensions
• Assorted CF/ISO flanged ports and adapters
• Various blanking plates and flange covers
• Internal chamber fittings/components (as pictured)
• Selection of smaller flanges, seals, and fittings

D.S.K DTK-1000 Microslicer Vibrating Microtome

This item was removed from a facility where it was surplus to requirement.

It is in working order,

Ellutia 200 Series Gas Chromatograph Type 20500130

This system was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on, however we are unable to test the system further at our facility.

The previous owner stated the unit was in working order prior to removal.

Please note that the lower section of the system appears to be custom-built.

Rear-Mounted Traps Included

• 3 × Moisture Traps
• 3 × Hydrocarbon Traps
• 2 × Oxygen Traps
• 1 × Arrestor

Continuum Surelite SLI-20 YAG Laser System w/ PSU, Optics & Spares

This item was removed from a facility where it was surplus to requirements.

The system is in good cosmetic condition with typical signs of previous laboratory use.

Due to safety restrictions regarding Class 3+ lasers at our facility, the main laser has not been tested. Components that do not involve laser operation have been powered on where possible.

No further functional testing has been carried out.

Included Components

• Surelite Continuum Main Laser (SLI-20)
• Small Mirror Box (SSP.1)
• Lyons Instruments PG 73N Bipolar Pulse Generator – S/N: 74577
• Stanford Research Systems SR510 Lock-in Amplifier – S/N: 10123
• Faraday Rotator Set
• Motherboard
• Shutter Button
• 2 × 50045 DI Filters – P/N: 313-0099
• 2 × Unopened Arc Lamps
• 6 × Opened Arc Lamps
• Laser Power Supply Unit (SLI-20) – No key included
• Metal crate for shipping

Sairem MiniFlow 200SS Solid-State Microwave-Assisted Reactor System

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The system comprises;

Sairem MiniFlow 200SS

• S/N - 88.07.14

Sairem CMO MINIFLOW

• Model - CMO MINIFLOW
• S/N - 50.07.14
• Model - TGCPWR340RNP1A
• S/N - 243.07.14
• Model - PCCMWR340PVMR1PE
• S/N - 366.07.14

GonoTec Osmomat 070 Cell Unit and Osmomat 070/090 Control Unit B

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

Includes;

• GonoTec Osmomat 070 Cell Unit
• Model - Osmomat 070
• S/N - 06 02 01

• GonoTec Osmomat 070/090 Control Unit B
• Model - Control-Unit B
• S/N - 06 02 02

OAI UV Exposure System with 2105C2 Controller & OAI 150 Exposure Timer

This system was removed from a facility where it was surplus to requirements.

All components power on and operate together.

The UV exposure system illuminates when the 2105C2 illumination controller is activated and the Exposure command is triggered on the OAI 150.

Both the illumination controller and the exposure timer show functional power indicators. A 5-second test exposure was successfully carried out using the OAI 150.

The UV exposure system is fitted with an exhaust duct and anode adapter cable, and includes a shutter cable with sensor and auxiliary fittings. No further testing has been performed.

Included Components:

OAI UV Exposure System

OAI 2105C2 Illumination Controller

OAI 150 Exposure Timer

Exhaust duct

Anode adapter cable

Shutter cable with sensor & auxiliary connectors

Thermo Elemental Model Type Solaar S2 AA Series Spectrometer

This item was removed from a facility where it was surplus to requirement.

It is in reasonably poor cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Some plastic panels are broken and or missing.

Included;

1 x Rubidium Data Coded Hollow Cathode Lamp. NC 9423 390 30371.

Digital CR Reader With Cassettes

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition.

It powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order prior to removal.

No software is included.

S/N: 3985

Thermo Heto PowerDry LL3000 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

Perkin Elmer Model Clarus 500 Gas Chromatograph (FID Detector) Lab

This item was removed from a university lab where it was surplus t requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order when it was last in use.

RF System with Hüttinger PFG 600, PFM 1500A, and SVT Associates RF Plasma Source

This system was removed from a university laboratory where it was surplus to requirements.

It includes an RF power supply, matching network, and RF plasma source assembly, originally integrated into an SVT Associates thin-film or sputtering setup.

The RF Generator and Matching Network power on and are in fair cosmetic condition, showing some general surface wear. The plasma source and accessories are also in fair condition. We are unable to test them further at our facility.

The system comprises the following:

• Hüttinger PFG 600 RF Generator (P/N: 457638, S/N: 24036227-010-001)
• PFM 1500A Matching Network (P/N: 461490, S/N: 4700/003)
• SVT Associates RF Plasma Source and Accessories (no serial or part number located)
• All necessary interconnecting cables and wiring

Varian 940-LC Liquid Chromatograph & 440-LC Fraction Collector with 445-LC & PC

This system was removed from a university lab where it was surplus to requirements.

All included units are in good cosmetic condition and power on, we are unable to test them further as a system at our facility.

User login information is available on request.

The system comprises the following:

Varian 940-LC Liquid Chromatograph

SN - LC0904M018

Sample Block Holds 200 x 5ml tubes

Varian 445-LC Scale-Up Module

SN -LC0904M025

Varian 440-LC Fraction Collector

SN - AY0902M019

Dell Optiplex PC

Dell 17" Monitor

Dell Mouse & Keyboard

Varian Galaxie Chromatography Software Version 1.9.302.952

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020.

It is in good cosmetic condition with minor marks.

Included with it are;

Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS software

Several manuals, safety, performance and maintenance schedule, pre-installation and operation

New and used spare skimmer and sampler cones

Spare electron multiplier

new and used spare printed circuit boards

Various tubing and connectors

Packet of various Thermo O rings

Many other unidentified small parts in sealed packaging

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is surplus to requirements.

The lab informed us that it was working when last used.

The microscope is from 1998, has one SE2 Detector.

Included are the following;

Hitachi S3000H SEM Scanning Electron Microscope Lab

Model: S-3000H

Date: 9/8/12

Part#: 50E-G386

Serial#: 1014-30

System specifications

- 0.3 - 30kV acceleration voltage range

- 5 nm resolution at 25kV in variable pressure mode

- 150mm diameter maximum specimen size

- Dual-bias for low voltage signal noise

- Backscatter mode

Canatron Transformers EN 60742 Transformer

Model: EN 60742

Serial#: CT6699

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: G8E008620

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: T9A 012253

Hitachi S3000H SEM Control Panel

Serial#: 1014-30

Edwards Oil Mist Filter EMF20

Serial#: A 462 29 000

Hitachi Measure Function Setup Disk V 01-05

Serial#: 50E-5497

Hitachi SEM Data Manager Setup Disk V 01-05

Serial#: 50E-5502

Hitachi S-3000Series V 10-16 CD Disc 1 & 2

Serial#: 50E-8108

Hitachi PC-SEM Restore CD Disc 1 & 2

Serial#: 1014-30

Adaptec SCSI Select v2.57.4 Floppy Disk

Serial#: 1492920-00

Adaptec AVA-2915LP/2930LP v1.13 Floppy Disk

Serial#: 1495022-00JA

HP Operating System DVD

Serial#: 483886-B21

Contec Drivers Software COM Setup Disk v.1.8

Serial# LYBM994

HP Compaq Business PC Documentation and Diagnostics DVD

Serial#: 490849-B21

HP Operating System DVD

Serial#: 394378-002

HP Operating System DVD

Serial# 486467-B22

HP Restore Plus! DVD

Serial#: 481206-B25

Roxio Creator Business 10 DVD

Serial#: 498164-B21

S300H Printed Circuit Board

Model S-3000H SEM Instruction Manual

Serial#: 50E-9247-9

Hitachi S-Type Filaments

Date: 08.06.201

Lot#: 0490228080

Serial#: 777-0179

Quoram Polaron SC7610 Sputter Coater

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

• 1 x 80cm length of 3/4" vacuum hose with clamped end.
• 2 x nitrile gaskets to fit chamber ends. No. A4100031
• 2 x SC7640 Operating Manuals
• 1 x Quorum Technologies Sputter Coating Technical Brief manual.

Serial No.: 93050-37

TA Instruments Nano 6300 DSC Differential Scanning Calorimeter

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Specifications:

• Model: 6300
• S/N: SNA025377