Items 2821 to 2840 of 3548

Image of item

£ 262.50 (ex. VAT) 1 in stock

Siemens-Elema Servo Ventilator E347E 900C, Air Mixer & Accessories Lab

ITEM-16479

This Siemens-Elema Servo Ventilator E347E 900C was removed from a university lab where it was surplus to requirements.


The unit is in reasonable cosmetic condition but has been previously used.


The unit powers up and the mains light comes on. The alarm sounded due to it not being supplied with gas. We were unable to test it any further.


The unit comes with an Oxygen Air Mixer 961, 2 plastic tubes which connect at the end, Hans Rudolph Respiratory Apparatus, a manual, & and an exchange set.


Because the unit must be installed and certified by a competent engineer prior to use, and that it has not been safety tested at our side, it is sold as spares / repairs.

Image of item

£ 375.00 (ex. VAT) 1 in stock

Sigma 1-13 Benchtop Centrifuge 13000rpm Lab

ITEM-15456

This Sigma 1-13 Centrifuge was removed from a laboratory where it was surplus to requirements.


The unit powers on and seems to function well up to it's max speed of 13000rpm.


It is in good cosmetic condition but does have some marks from use o it.



Comes with rotor fitted.

Rotor hole dimensions:

10.8mm x 37.7mm


Image of item

£ 116.45 (ex. VAT) 1 in stock

Sigma 1-15PK Lab Refrigerated Centrifuge PN:10152 14000rpm Lab Spares/Repair

ITEM-15427

This Sigma 1-15PK Refrigerated Centrifuge was removed from a lab where it was surplus to requirements.


The unit powers up fine and you can set parameters.


The refrigeration function doesn't seem to be working. The compressor sounds like it's working, but the unit doesn't get cold. The records indicate there was a refrigeration fault in 2019 and it doesn't seem to have been repaired.


It is in good cosmetic condition, and comes with a Sigma rotor.


Because of the cooling fault the unit is sold as spares / repairs.

Image of item

£ 750.00 (ex. VAT) 1 in stock

Sigma 1-16K Refrigerated Benchtop Centrifuge 14000rpm Lab

ITEM-15471

This Sigma 1-15K Centrifuge was removed from a university where it was surplus to requirements.


The unit powers on and works well. It has been tested down to the Maximum of -10degC and up to 35degC. It comes fitted with Sigma rotor 12124 and the rotor hole size is: 11.1mm x 37.5mm. It runs up to 14,000rpm Maximum with ease.


The unit has been thoroughly cleaned and is now in good, used cosmetic condition but it does have some age related marks. The lid actuator was stuck but it is now fixed.




Image of item

£ 160.76 (ex. VAT) 1 in stock

Sigma 113 Laboratory Centrifuge Benchtop Lab

ITEM-09048

This unit was removed from a lab as surplus to requirements.


The unit appears to work as it should, but unfortunately the lid won't stay up.


This is missing one of the front feet.

Image of item

£ 157.50 (ex. VAT) 1 in stock

Sigma 113 Mini Microcentrifuge Centrifuge 13000rpm 40mL Lab

ITEM-15457

This Sigma 113 Mini Centrifuge was removed from a laboratory where it was surplus to requirements. 


The unit powers on and runs well up to its max speed of 13000rpm. The unit is in good cosmetic condition.


The timer works, but the dial doesn't move with the time. The rotor has 2 different bucket sizes. 10.9mm x 37.7mm and 7.8mm x 38.5mm

Image of item

£ 698.68 (ex. VAT) 1 in stock

Sigma 2-5 3900rpm Benchtop Centrifuge + 11030 37/D Bucket Rotor Lab

ITEM-15455

This Sigma 2-5 Small 3900rpm Bench Centrifuge was removed from a lab where it was surplus to requirements.


It comes fitted with a Sigma 11030 37/D rotor with 13034 235/D Buckets and Sigma 14034 bucket adapters.


The unit powers on and works well.


It is in good condition overall but there was a issue with the lid which has lead emergency cord snapping off. The lid now opens and closes properly, but we would advise that the lid lock actuators are replaced in the long term as well as the emergency cord.








Image of item

£ 241.25 (ex. VAT) 1 in stock

Sigma 201M Bench-Top Laboratory Centrifuge Martin Christ

ITEM-09319

This item was removed from a lab as surplus to requirements. The unit appears to be in working order.

Image of item

£ 83.03 (ex. VAT) 1 in stock

Sigma 2K15 Bench-Top Microcentrifuge Lab Spares or repairs

ITEM-07126

This Sigma 2K15 Bench-Top Microcentrifuge was removed from a laboratory where it was surplus to requirements.


The unit initially powered on but wouldn't run a program at all. It showed error 99 as soon as you try to start it. There also seems to have an issue with the lid.


Then it started smoking and powered down and no longer appears to power up.


Sold as spares or for repair.

Image of item

£ 273.38 (ex. VAT) 1 in stock

Sigma 4K10 Refrigerated Centrifuge Laboratory Benchtop Equipment

ITEM-06513

Sigma 4K10 Refrigerated Centrifuge


This unit comes with Nr. 12167 13000/min 86g Rotor


Tested up to 10000rpm and the refrigeration works.


Image of item

£ 180.45 (ex. VAT) 1 in stock

Sigma Centrifuge Rotor NR 12500 9600/min Ultracentrifuge Lab

ITEM-09952

This centrifuge was removed from a lab as surplus to requirements.


We have not tested the rotor.

Image of item

£ 321.52 (ex. VAT) 1 in stock

Sigma Centrifuge Rotor NR.12168-H, 14000/min, 41/97

ITEM-09962

This rotor was removed from a lab as surplus to requirements.


We were told that the rotor was working when last used, but because it may be beyond its service life they no longer want to use it in their lab.


We have not tested the rotor and the unit will need to be inspected prior to use to make sure it is safe for use in your centrifuge.

Image of item

£ 218.70 (ex. VAT) 1 in stock

Sigma Centrifuge Rotor NR12165 13000/min G-612

ITEM-09961

This rotor was removed from a lab as surplus to requirements.


We were told that the rotor was working when last used, but because it may be beyond its service life they no longer want to use it in their lab.


We have not tested the rotor and the unit will need to be inspected prior to use to make sure it is safe for use in your centrifuge.

Image of item

£ 150.00 (ex. VAT) 1 in stock

Sigma Nr.12148 1 Centrifuge Mikroliter Rotor Lab 13500rpm

ITEM-14954

This Sigma Nr.12148 15300/min Centrifuge Rotor was removed from a laboratory where it was surplus to requirements.


It was removed from a Sigma 2K15 Centrifuge and is in good used condition.


The rotor has not been tested by us and will need inspecting for safety before use.



Measurements:

Approx 17cm.

Centre bore: 10.8mm.

Tube holes: 10.8 x 36.2mm.

24 sample holes.


Image of item

£ 45.01 (ex. VAT) 1 in stock

Sigma Sigmaware Glass Culture Test Tubes (Lot of 69) Cat No C5916 Lab

ITEM-12151

These culture tubes were removed from a university lab as surplus to requirements.

Image of item

£ 84.74 (ex. VAT) 1 in stock

Sigma T2203 White Light Box X-Ray Viewing Transilluminator Model 16-3702 Lab

ITEM-15923

This Sigma T2203 White Light Transilluminator Model 16-3702 was removed from a university laboratory where it was surplus to requirements.


The unit is in good condition but has been previously used.


The unit powers on and all the sockets and bulbs are working. The dimming function was tested and is also working.


The Illuminated area is 38.6cm x 21.6cm.


Image of item

£ 42.88 (ex. VAT) 1 in stock

Sigma VM20 20 Tap Vacuum Manifold Unit Lab

ITEM-15600

Sigma VM20 20 Tap Vacuum Manifold Unit was removed from a lab where it was surplus to requirements.


It's made of plastic and has valves/taps on the top but It is missing 3 taps.


It is in good, used cosmetic condition but has not been tested by us.

Image of item

£ 67.82 (ex. VAT) 1 in stock

Sigma-Aldrich Vacuum Filtration Assembly Funnel Stem Z290688-1EA Lab

ITEM-15615

Sigma-Aldrich Vacuum Filtration Assembly Funnel Stem Z290688-1EA


The unit was removed from a laboratory where it was surplus to requirements.


The unit is brand new in the box.




Image of item

£ 33.74 (ex. VAT) 1 in stock

Signal Interface Spec A / D Interface Model 604C

ITEM-02744

Signal Interface Spec A / D Interface Model 604C

Image of item

£ 80.95 (ex. VAT) 1 in stock

Silverline 15 Drawer Office Filing Cabinet Office Grey

ITEM-13636

This unit was removed from a university store room during a clearout.


Nice used condition. Silverline badge has come ungluded. We still have it, so it could be easily re-attached.


15 drawer.


Measures: 86.5cm H x 41cm D x 28cm W.


Items 2821 to 2840 of 3548