Items 2861 to 2880 of 3286

Image of item

£ POA 1 in stock

Thermo Electron Corporation French Pressure Cell Press with Accessories Lab

ITEM-20497

This Thermo Electron Corporation French Pressure Cell Press was removed from a university lab where it was surplus to requirements.


The unit powers up and the pressure increases and decreases on the dial, it has not been tested further. The Ratio selector handle is operational. When Selecting DOWN, MEDIUM or HIGH all three setups are functioning.


It is in reasonably good cosmetic condition but has some rust and marks from use.


Included with it are;

2x PC-426 Back up rings

2x packs of Rubber O rings

2x A-0100 O rings

2x A-0099 Back up rings

2x Milbar Circlip pliers

1 x Screw/washer

1x A-3339 Gland Nut

1x pack of A-4574 O rings

3 x PC 113

1x A-1677 Hole Plug

1x pack A-4076 Ring Inverts

2x metal 'T piece' attachment

1x pack of A-5031 Back up rings

2x packs or micro O rings

1x Hose 1x micro hose 1x Allen key

1 x rubber Valve attachment

1x Cell body

1x Closure plug

1x Sample outlet tube


Image of item

£ 64.64 (ex. VAT) 1 in stock

Thermo Electron Corporation Hypersil GOLD aQ 100 x 2.1mm HPLC Column 25302-10213

ITEM-15564

This Thermo Electron Corporation Hypersil GOLD aQ 100 x 2.1mm HPLC Column was removed from a laboratory where it was surplus to requirements.


The item is in good, used cosmetic condition but we do not know how long it was used for. It has not been capped.


Column TypeReversed Phase
Packing MaterialSpherical, Fully Porous, Ultrapure Silica
PhaseReversed Phase
Diameter (Metric)2.1 mm
Length (Metric)100 mm
Particle Size1.9 μm
Pore Size175 Å
Temperature60°C
Stationary PhaseaQ C18
EndcappedPolar
Carbon Load12%
Column FormatAnalytical Column
For Use WithLC/MS
Max. Pressure18130 psi (1250 bar)
pH2 to 9
Surface Area220 m²/g
USP TypeL1
Product LineHypersil GOLD


Image of item

£ POA 1 in stock

Thermo Electron Corporation Steri-Cult CO2 Incubator Model 3308 Lab

ITEM-20115

This Thermo Electron Corporation Steri-Cult CO2 Incubator Model 3308 was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer.


When set to 37˚C the display reached 35˚C but our thermometer measured 37.3˚C.

When set to the max of 50˚C the display reached 43.9˚C and our thermometer measured 46.6˚C.


The exterior is in reasonable cosmetic condition but has some marks from heavy use. It is in very good condition inside.


It was not tested with water or CO2.





Image of item

£ 634.08 (ex. VAT) 1 in stock

Thermo Electron Haake TC500 Recirculating Chiller Lab

ITEM-17712

This Thermo Electron Haake Model TC500 Recirculating Chiller was removed from a university lab where it was surplus to requirements.


We were assured by the lab the unit was in good working order when last used.


At our site, the unit powers on and runs, but we were unable to test it further.


It is in reasonably good cosmetic condition but has marks from use.


Image of item

£ POA 1 in stock

Thermo Electron IEC CL30 Centrifuge with T20 4100rpm Rotor - 11210904 Lab

ITEM-20170

This Thermo Electron Corporation IEC CL30 Centrifuge was removed from a university lab where it was surplus to requirements.


Model No. 11210904


The unit is in reasonably good cosmetic condition but has a scuff above the switch and the rubber seal has begun to perish. This doesn't affect the operation of the unit.


The unit powers up and has been tested at both 500 and 4100 rpm. It runs well


Image of item

£ POA 1 in stock

Thermo Electron Multifuge 3S-R Benchtop Laboratory Centrifuge Lab Spares/Repairs

ITEM-19304

This Thermo Electron Multifuge 3S-R Benchtop Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.


The unit is in good used cosmetic condition but it does have various scratches, marks and signs of general use.


The unit powers up and runs fine and has been tested with a digital thermometer (not included).


We tested it at:

-9ºC - The minimum temperature. The thermometer showed -9.4ºC.

0ºC - The thermometer showed -1.4ºC

4ºC - The thermometer showed 3.9ºC


We tried running it at 20ºC but the unit would only reach 15ºC and the thermometer showed 17ºC. We did run it for a significant amount of time, but the temperature would not climb at all. The maximum temperature is supposed to be 40ºC but we are not sure if it is actually designed to incubate.


The centrifuge has a Sorval 75006445 rotor fitted with 4 x 75006441L 750ml buckets and 2 x 75006533 Thermo 5 x 50ml bucket adapters.


The rotor maximum speed is 4600rpm, which is what the centrifuge will run at with it fitted.


Image of item

£ 138.28 (ex. VAT) 1 in stock

Thermo Electron PX2 (PCYL220) Laboratory Thermal Cycler PCR DNA Spares Repair

ITEM-09321

The unit powers on briefly, but then the power cuts out, and no digital display comes up. So it is sold as spares /r epair.

Image of item

£ 102.14 (ex. VAT) 1 in stock

Thermo Electron RDS Transceiver MPT1340 Lab

ITEM-12701

This unit was removed from a lab during a clearout.


We have not tested the unit.

Image of item

£ POA 1 in stock

Thermo Electron Varioskan Flash Spectral Scanning Multimode Microplate Reader

ITEM-19508

This Thermo Electron Varioskan Flash Spectral Scanning Multimode Microplate Reader was removed from a university lab where it was surplus to requirements.


All the units are in reasonable used cosmetic condition but they do have various signs of general use. Mainly marks from tape and some minor scuffs etc.


The system consists of:


1 x Thermo Variosksn Flash Main Unit.

Powers up fine but shows a warning. It will connect to the PC via a USB cable and the PC software controls the unit. We could get the sample tray to open and close. The unit had a warning from the lab on the front: 'Excitation Beam Position Failure'. This is the warning that appears on the PC screen when you try to run the unit. The unit appears to require repair/servicing. It does appear to have had a good service record up to 2020.


1 x Dell Optiplex 755 PC.

It powers up and comes with Keyboard, Mouse & Monitor.

It has the following software installed:


1 x Thermo SkanIT 2.4.3.37.

1 x Caliper Life Sciences Living Image 4.3.1.

All users and data have been removed.



Image of item

£ 160.76 (ex. VAT) 1 in stock

Thermo FastPrep FP120 Cell Disrupter (Homogenizer & Isolation System) - Faulty

ITEM-03722

Thermo FastPrep FP120 Cell Disrupter (Homogenizer & Isolation System)

The Thermo Electron FastPrep FP120 Cell Disrupter is fully-programmable. It has a speed range of 4.0 to 6.5 m/sec and runs from 1 to 45 seconds. Designed to process 12 tubes at a time, this equipment has a complete set of spoke plate, retention spokes, rotation knob, and a sample holder inside.


This unit is faulty, the interior rotor is damaged.

Image of item

£ 9,375.00 (ex. VAT) 1 in stock

Thermo Finnigan GC System - TraceGC, Polaris Q Mass Spec & AS3000 Autosampler

ITEM-16338

This Thermo Finnigan GC System was removed from a university laboratory where it was surplus to requirements.


All the units are in good, used cosmetic condition but they do have various signs of use.


The system consists of:


1 x Trace GC Gas Chromatograph

1 x Polaris Q Mass Spectrometer

1 x AS 3000 Autosampler. There appear to be some pieces of the autosampler missing.


Both the GC and Mass Spec units power up fine but we were unable to test them any further. The Autosampler has not been powered up, as it requires a 24volt PSU.


Image of item

£ 7,187.93 (ex. VAT) 1 in stock

Thermo Finnigan MAT95 XP Mass Spectrometer Lab

ITEM-19593

This Thermo Finnigan MAT95 XP Mass Spectrometer is being sold on behalf of a client. It is surplus to requirements.


The unit is in good cosmetic condition and still under vacuum. The unit had a digital frame failure - unfortunately an onboard fan failed, and then the unit overheated. But, there is a spare digital frame that can be swapped in, but it has not been attempted.


There are a huge variety and number of spares for this instrument included in the sale due to de-commissioning and donation of parts from other machines of the same model in the past.


Also comes with two edwards vacuum pumps and a chiller. There are a number of turbo pumps inside the unit also.

Image of item

£ 4,798.80 (ex. VAT) 1 in stock

Thermo Finnigan Polaris Q Ion Mass Spectrometer, Trace GC 2000, Edwards Pump Lab

ITEM-06943

This Thermo Finnigan PolarisQ Ion Mass Spectrometer System was removed from a lab as surplus to requirements.


All the units power on but we were unable to run further testing. Everything is in reasonable cosmetic condition but has been used previously.


Included with this system:-


Thermo Quest

Model - Trace GC 2000

Inside oven dimensions - Height - 17cm x Width - 17cm


Thermo Finnigan

Model - Polaris Q - Mass Spectrometer


Edwards Pump

Model - RV5


Thermo Finnigan Auto Sampler

Model - AS 3000

Requires 24V DC Power supply which is not included (item was tested with our own power supply which is not included)



Also included:-

1 x Half bottle of Vacuum Pump Fluid

1 x 3/4 Full bottle of Hydrocarbon Oil

Paperwork of Service Report, material data sheet & parts list.


Image of item

£ 4,605.22 (ex. VAT) 1 in stock

Thermo Finnigan Trace GC Ultra + DSQ Mass Spectrometer System Lab

ITEM-15883

This system was removed from a university lab as surplus to requirements. The lab manager assured us it was in good working order when last used.


However unfortunately they have not been able to remember the PC's passwords, so as of yet, we have been unable to access the PC. Prior to dispatch, we may have to remove the hard drive, unless we can find some alternative solution. Please enquire and we can discuss it further.


The system comprises of:


1 x Finnigan Trace GC Ultra

1 x Finnigan Trace DSQ Mass Spectrometer

1 x Dell PC with keyboard, monitor, mouse and interface card

1 x Thermo ION Volume Insertion/Removal Tool in case.

Various cables and leads.

1 x Helium Gas Regulator.

Image of item

£ 27,000.00 (ex. VAT) 1 in stock

Thermo Finnigan Trace GC Ultra, Delta Plus XP, Combustion 3, Lab

ITEM-15729

This system was removed from a university mass spectrometry facility that was closing down.


As part of a university efficiency drive departmental mass spectrometry facilities were closing and being replaced with central facilities. This system was no longer required. Please note the table shown in the photos is NOT included.


It was in full working order, and only used by a relatively small department, but was maintained by a dedicated facility technician.


Whilst we have not tested every part, we were assured the system was essentially in good working order, though given the number of components, some minor servicing might be required. We are happy to discuss warranties with you to provide you assurances for the purchase.


The system consists of:


1 x Dell OptiPlex 7050 Windows 7 PC with Isodat 3.0 software installed.

It comes with a screen, keyboard, and mouse.

The unit powers up fine and appears to work as it should.

It has various interface cards installed.


1 x Thermo Finnigan Delta Plus XP.

The unit is in good cosmetic condition.


1 x Thermo Finnigan Trace GC Ultra.

Version 4.07 2003.


1 x Peltier Thermostat MN 03-00 Rev C.

This unit doesn't appear to power up and has not been tested.


1 x CTC Analytics MN 01-00 Rev E.

The unit powers up but was not tested any further.


1 x Thermo Finnigan GC Box.

The unit powers on but has not been tested further.


1 x Thermo Finnigan Gas Bench 2.

It powers up fine but the power switch is faulty. It works but will require replacement. Part of the readout LED is dim so the numbers don't appear totally correctly.


1 x Thermo GC/TC Reactor OD.

The display seems to just flash 1999 when powered up. The display is also a little dim.


1 x Thermo Finnigan GC Combustion/Interface III.

The unit powers up fine but the Ox Reactor screen flashes 1599 and part of the LED is a bit dim. The red Reactor screen shows 35.


1 x Agilent Technologies ADM1000 Universal Gas Flowmeter.

It requires a 9v battery to run. It powers up and appears to run fine.


1 x Claude Lyons TS Voltage Stabiliser.

TS 333 10.

The unit is in good cosmetic condition but the back panel is slightly bent. We were unable to test this unit.


1 x Box of various cables for the system plus used pipework. This will probably all require replacement.

Also included are some software CDs. We believe these are for the PC OS.


1 x Thermo Finnigan Sample Tray Thermostated.

The unit powers up and is in good, used cosmetic condition, but it does have signs of use.

The main cables have been slightly cut, but have been taped and still appear to work fine.

The setpoint was set to 37degC but the block well exceeded that temperature so we're not sure how accurate or stable it is. It comes attached to some sort of base unit but this can be removed easily if need be.

The heating bock measures: 33cm L x 32.7cm W x 13.5cm High.

The tube holes are 16mm x 86.3mm without the cover and approx 8.9mm with the cover which appears to be a hole size reducer.

There are 96 holes.



Please note that the table in the main picture is NOT included in the sale.

Image of item

£ 5,311.33 (ex. VAT) 1 in stock

Thermo Finnigan Trace GC Ultra, TriPlus AS Autosampler Lab

ITEM-16337

This Thermo Finnigan Trace GC System was removed from a university laboratory where it was surplus to requirements.


All the units are in good, used cosmetic condition, and all power up. We were unable to test them further than this, however.


The system consists of:


1 x Finnigan Trace GC Ultra With TriPlus AS Autosampler.

1 x Thermo TP100 Sampler Supply


It also comes with some spares and cables.



Image of item

£ 89.95 (ex. VAT) 2 in stock

Thermo Finnpipette 200-1000µL Laboratory Pipette Lab

ITEM-18352

This Finnpipette 200-1000µL Laboratory Pipette was removed from a university lab where it was surplus to requirements.


It is in reasonably good cosmetic condition with a few marks from use. It has not been tested.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ 750.00 (ex. VAT) 2 in stock

Thermo Fisher Scientific Heraeus Pico 17 Benchtop Centrifuge Lab

ITEM-18822

This Thermo Fisher Scientific Heraeus Pico 17 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested up to 13000rpm without a rotor fitted.


It is in good cosmetic condition but has some marks from use.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ POA 1 in stock

Thermo Haake C25P Refrigerated Water Bath w/ Phoenix Controller 011-0100 003-942

ITEM-19454

This Thermo Haake C25P Refrigerated Water Bath w/ Phoenix Controller was removed from a university lab where it was surplus to requirements.


The unit consists of;

1 x Phoenix controller - Thermo Haake Type - 011-0100

1 x Bath - Thermo Haake Type - 003-9422


The unit powers up and was set to 37˚C which is quickly reached. We then set it to 100˚C which it took about 15 further minutes to get to. We then set it to -28˚C but it would not cool down. There should have been a snowflake symbol but it did not show up.


It is in reasonably good cosmetic condition with marks from use.


It is sold for spares or repairs as it doesn't cool down.


Image of item

£ 162.00 (ex. VAT) 1 in stock

Thermo Hybaid Mini Dual 14 Hybridization Oven Lab Spares/Repairs

ITEM-13305

This unit was removed from a lab where it was surplus to requirements.


We tested the unit at a number of temperatures and it seemed reasonably close to our temp probe - though it was out by a few degrees.


When set to max the unit reached 84C.


Please note that the temperature down button is missing and the temperature cannot be easily reduced. This will need fixing before it can be properly used.



Items 2861 to 2880 of 3286