Workshop

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0R Centrifuge Lab Spares/Repairs

ITEM-44630

Heraeus Megafuge 1.0R Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in fair cosmetic condition and powers on. However, a lid sensor error prevents operation.

Therefore, it is listed as Spares/Repair.

Also includes:

1 x Heraeus Sepatech Megafuge Centrifuge Rotor 6000 RPM Cat 3360

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Mixed Lighting Equipment - Colour Wash 250AT, PAR-56XY, MAC 250TM

ITEM-44606

Mixed Lighting Equipment - Colour Wash 250AT, PAR-56XY, MAC 250TM etc

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included are:

3 x Vision Par 64 Lantern

1 x Stage Lighting PAR-56XY

1 x GLP Impression Light

2 x Pulse Tripod

1 x BeyerDynamic Tripod

1 x Robe Show Lighting Colour Wash 250AT

2x Stage lights with Blue Filter

1 x Martin MAC 250TM Light

1 x Disassembled light

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Jouan CR422 CR-422 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-44391

Jouan CR 422 Refrigerated Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, due to internal damage to the motor, we cannot conduct further testing.

Therefore, it is listed as Spares/Repair.

Also includes the following:

1 x Jouan Cr Swing Bucket Rotor 4750 Max Rpm

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

RoMedic MiniLift 200 Patient Standing Aid Spares/Repair (No battery or Harness)

ITEM-42989

System RoMedic MiniLift 200 System Patient Standing Aid

This item was removed from a facility where it was surplus to requirements.

It is in fair cosmetic condition, with some scratch marks to the paint finish.

This system has been marked for spares or repairs due to the absence of a battery, a cracked battery holder, and missing screws.

No patient harness is included. No testing has been carried out.

Includes:

RoMedic MiniLift 200 frame only

Specifications;

Max capacity: 200 kg
Battery type: Two 12V, 2.9Ah valve-regulated sealed lead accumulators (gel-type)
Charger output: Max. 400mA
Serial No.: 401100334

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Neslab CFT-75 Coolflow Refrigerated Recirculator Chiller Lab Spares/Repairs

ITEM-41632

NesLab CFT-75 Coolflow Refridgerated Recirculator Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. However, due to the following faults it is listed as Spares/Repair.

Faults:

The coupling is snapped between the motor and the pump head.
There is no water being recirculated.
Pump head appears to be seized.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Teikos TS601 PW DET PS Dishwasher Lab Spares/Repairs.

ITEM-41246

Teikos TS601 PW DET PS Dishwasher

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition internally, and externally.

When powered on, it tripped the power at our facility, therefore we are unable to test it, and it is listed as Spares/Repairs.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Infors AEROTRON Shaker Incubator Lab Spares/Repairs

ITEM-39841

Infors AEROTRON Shaker Incubator

This was removed from a university lab where it was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

We think this unit would make for a great movie prop.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Beckman Coulter Allegra 64R Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39218

Beckman Coulter Allegra 64R Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display reads the following error:

Error98: "The Error 98 indicates an invalid rotor ID. This can be caused by a malfunctioning rotor sensor, damaged rotor magnets, or bad signal read by the Rotor ID sensor due to oxide dust on the rotor's magnets."

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

C0650 Fixed-Angle Conical Tube Rotor, Aluminum

Tube Volumes: 50 mL

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heto CT 110 Cold Trap Lab Spares/Repairs

ITEM-37364

Heto CT 110 Cold Trap

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition, but it consistently trips the electrical circuit when powered on. The fuse has been checked and is working, yet the problem persists.

Due to the electrical fault, this item is listed as spares or repairs

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs

ITEM-35813

This was removed from a university lab where it was surplus to requirements

THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.

It is sold for spares/repairs.

No rotor included.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Syngene G:Box EF/Chemi XR5 Chemiluminescence Fluorescence Gel System Lab Faulty

ITEM-31578

Syngene G:Box EF/Chemi XR5 Chemiluminescence Fluorescence Gel System Lab

This item was removed from a university lab where it was surplus to requirements.

The unit is in good used cosmetic condition. When connected, the GeneSys software reports that the camera is warmer than optimal, likely indicating a potential issue with the camera.

However, the camera remains functional, and no noticeable heat was felt upon touch. This system was testing with an in-house PC set-up with GeneSys software, this is not included in the sale.

Due to the camera error, this system is listed as Spares/Repair.

System includes:

1 x Syngene GEF/Chemi XR5, equipped with:
Upper white light
TLUM mid-wave UV lamp
Epi long-wave UV
Synoptics Art 5.5/5.0MP camera

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Julabo Recirculating Chiller Model: FLW1703GB Lab Spares/Repairs

ITEM-20313

This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. It has scratches and stains along its surface.

The unit powers up but requires a replacement compressor.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sanyo Biomedical Freezer MDF-U537 Spares/Repair Lab

ITEM-43079

Sanyo Biomedical Freezer MDF-U537 Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to cool and remained at ambient temperature.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Varian CC2C Module Model Sentorr Vacuum Gauge Controller LabSpares/Repairs

ITEM-45018

Varian CC2C Module Model-Sentorr

This item was removed from a university lab where it was surplus to requirements. It is in fair cosmetic condition.

When powered on, a high-pitched sound emits from the back of the unit, and none of the front functions work, including the screen and buttons.

Therefore, it is listed as Spares/Repair.

Specifications:

Model: Sentorr
Serial No.: LID30427

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

11 x Metrologic MS2320 StratosH Barcode Scanner & 1 x Honeywell MS2320

ITEM-47710

11 x Metrologic MS2320 StratosH Barcode Scanner & 1 x Honeywell MS2320

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Includes:

11 x Metrologic MS2320 StratosH Barcode Scanner
1 x Honeywell MS2320
14 x Herbert CS-610
14 x PSU with 3-pinned female connection
14 x Bags of mixed data cables

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

New Brunswick Scientific Controlled Environment Incubator Shaker G-25 Lab Faulty

ITEM-41336

New Brunswick Scientific Controlled Environment Incubator Shaker G-25 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, although it is not fully operable due to the following issues:

Does not drop below 20ºc.
When you set the desired temperature, it continues to exceed that level.
Does not function past 300RPM.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 150 Incubator Lab Spares/Repairs

ITEM-45432

Heraeus Hera Cell 150 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The incubator powers on but does not heat when a temperature is set.

The auto-run light flashes continuously, indicating a possible fault.

Therefore, we are unable to conduct further testing, and this item is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 300 Lab Spares/Repairs

ITEM-45447

RS Biotech Galaxy R CO2 Laboratory Incubator Model 300 Lab Spares/Repairs

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, the control screen is not functional.

Therefore, further testing could not be conducted, and the item is listed as Spares/Repair.

Specifications;

Model: 300
S/N: 9691

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Binder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen

ITEM-45448

Attributes not completeBinder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, the control screen is not functional.

Therefore, further testing could not be conducted, and the item is listed as Spares/Repair.

Specifications;

Model: CB 150
SN: 07-27207

Features;

Inside dimensions: D50 x W50 x H59cm
3 x Shelves - 44.5 x 49.5cm

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 150 Lab Incubator Faulty - No CO2 Filter Port - Spares/Repairs

ITEM-45452

Heraeus Hera Cell 150 Lab Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good working order.

However, it requires a CO2 filter port and is listed as spares or repair. It was tested using a CO2 port from another unit.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Binder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen

ITEM-45449

Attributes not complete

Binder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, the control screen is not functional.

Therefore, further testing could not be conducted, and the item is listed as Spares/Repair.

Specifications;

Model: CB 150
SN: 11-10194

Features;

Inside dimensions: D50 x W50 x H59cm
4 x Shelves 44.5 x 49.5cm

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 150 Lab Incubator No CO2 Filter Port - Spares/Repairs

ITEM-45454

Heraeus Hera Cell 150 Lab Incubator

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and has been successfully temperature tested.

However, it is listed as Spares/Repair as it requires a CO2 filter port and is missing the inner door lock.

It is in good cosmetic condition.

Specifications;

Model-Hera Cell 150
S/N-99103965

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Kendro Heraeus HERAcell 150 CO2 Incubator Spares/Repairs - No IEC Port Lab

ITEM-46286

Kendro Heraeus HERAcell 150 CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The unit is unable to be powered on as the IEC port has been removed, by the previous owner. Therefore, it is listed as Spares/Repair.

It is in fair cosmetic condition but the door latch has been removed.

Includes a stand.

Model: HERAcell 150

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heraeus HERAcell 150 CO2 Incubator - Water Sensor Fault S/R Lab

ITEM-46569

Heraeus HERAcell 150 CO2 Incubator - Water Sensor Fault S/R Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good overall cosmetic condition and has been successfully temperature tested, however, the previous owner stated it has a faulty water sensor.

Therefore, it is listed as Spares/Repair.

Additionally, this unit has not been CO2 tested.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ 170-300 PLUS Incubator Lab Spares/Repairs

ITEM-47194

RS Biotech Galaxy R+ 170-300 PLUS Incubator (Spares/Repairs)

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and has been successfully temperature tested.

However, the outer door seal is split, and the door has snapped off the hinge.

Therefore, it is listed as Spares/Repairs.

Please note: This item has not been CO₂ tested.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ 170-300 PLUS Incubator Spares/Repairs Lab

ITEM-47195

RS Biotech Galaxy R+ 170-300 PLUS Incubator Lab Spares/Repairs

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been successfully temperature tested, however the outer door seal has split and door has snapped off the hinge

Therefore, it is listed as Spares/Repair.

Please note; This item has not been CO2 tested.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model MCO-18AIC Lab

ITEM-37237

Sanyo CO2 Incubator Model MCO-18AIC

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on and is in a reasonable, used cosmetic condition.

However, it displays an error code: E12: Main heater is abnormal.

According to the previous client, the unit was not in working order prior to removal.

Due to the statement above, this item is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 Co2 Incubator Spares/Repair - Broken CO2 Port Lab

ITEM-42721

Heraeus Heracell CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic and working condition. This unit was successfully temperature tested, however, due to the CO₂ connecting port at the rear being broken (as shown in photos), the CO₂ functionality was not tested.\

Therefore, it is listed as Spares/Repair.

Includes:

Three shelves
Humidifying pan

The door seal and inner door catch are in good condition.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

RS Biotech Galaxy Co2 Incubator - Spares/Repair Lab

ITEM-42719

RS Biotech Galaxy Co2 Incubator - Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to heat and remained at ambient temperature.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

RS Biotech Galaxy Co2 Incubator - Spares/Repair Lab

ITEM-42718

RS Biotech Galaxy CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, however, due to the missing glass inner door, further testing could not be carried out.

The item is missing one foot and the internal glass door.

Therefore, it is listed as Spares/Repair.

Includes:

Three internal shelves

Model: 170

Serial No.: 1144

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC Co2 UV Incubator Faulty CO2 Sensor Spares/Repair Lab

ITEM-42717

Sanyo MCO-18AIC Co2 UV Incubator Faulty CO2 Sensor Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and has been successfully temperature tested, however, during CO2 testing it failed to stabilise.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC C02 Laboratory Incubator Lab Spares/Repairs

ITEM-42200

Sanyo MCO-18AIC CO2 Laboratory Incubator

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and has been temperature tested (thermometer not included).

During testing, the following error code appeared: E01 – indicating that the CO2 cylinder is empty. It was not.

The system also does not regulate heat very well. It is sold for spares/repairs

Therefore, the item is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Leec P3 laboratory Incubator Lab Spares/Repairs

ITEM-39815

Leec P3 laboratory Incubator

This was removed from an industry lab where it was surplus to requirements.

The unit powers up but has issues with temperature regulation. We think the cause of this is a fan fault. (Digital thermometer not included).

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Carbolite Laboratory Incubator PIF120 Lab

ITEM-37440

Carbolite Incubator PIF120

This was removed from a university where it was surplus to requirements.

It is in reasonably good cosmetic condition.

The glass door is detached from the unit, as shown in the pictures. The adhesive has come loose on the top and bottom hinges, therefore it is sold as Spares or Repairs

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model-MCO 20AIC Lab Spares/Repairs

ITEM-37261

Sanyo CO2 Incubator Model MCO-20AIC

This item was removed from a university where it was surplus to requirements.

It powers up but is reported to have a faulty CO2 sensor, displaying an E11 error, and is therefore listed as Spares/Repair.

No further testing was conducted.

The unit is in good cosmetic condition both internally and externally.

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Sanyo MC0-19AIC (UV) CO2 Lab Incubator Spares/Repair

ITEM-45443

Sanyo MC0-19AIC (UV) CO2 Lab Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It is in fair cosmetic condition. The power cable has been cut, therefore, we are unable to power it on or test further.

Note: The last service on this unit failed.

Due to the issues stated above, this incubator is listed as Spares/Repair.

Model: MC0-19AIC

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Thermo Heracell 150 Floor-Standing Incubator Lab Spares/Repairs

ITEM-45374

Thermo Heracell 150 Floor-Standing Incubator Lab

This item was removed from a university laboratory where it was surplus to requirements.

The incubator has a faulty door that is coming apart, and due to this issue it has failed the Visual PAT and was not powered on.

Therefore, it is listed as Spares/Repair.

Other than the damaged door it is in reasonably good cosmetic condition.

Specifications.

Model: HERAcell 150
Serial No.: 40663132

SPARES/REPAIR ITEM

£ 400.00 (ex. VAT) 1 in stock

Binder CO2 Incubator C170 Lab Spares/Repairs

ITEM-45251

Binder Incubator C170

This item was removed from a university where it was surplus to requirements.

The unit powers on and is in fair cosmetic condition, showing signs of general use.

Testing revealed a potential sensor fault and temperature regulation issue, as the temperature did not rise above 14.8°C when set to 37.0°C, and the display incorrectly indicated the door was open despite it being closed and locked.

Due to the faults listed above, this item is listed as Spares/Repair.

Specifications: Model: C170

SPARES/REPAIR ITEM

£ 390.00 (ex. VAT) 1 in stock

Oriel Arc Lamp with Arc Lamp Ignitor & 300-500W Xe & Hg Power Supply Faulty

ITEM-36893

Oriel Arc Lamp with Arc Lamp Ignitor & 300-500W Xe & Hg Power Supply

Included are;

Oriel 300-500W Xe and Hg(Xe) Power Supply

Model - 68811

SN - 120

Oriel Arc Lamp

Model - 77504

SN - 118

Oriel Arc Lamp Ignitor

Model - 68705

SN - 253

All units connect together and the power supply powers on. When lamp start was pressed there was a pulsing sound and a flicker of light but nothing more.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 385.00 (ex. VAT) 1 in stock

Dionex IC25 Chromatograph Lab Spares/Repairs

ITEM-38974

This Dionex IC25 Chromatograph was removed from a university lab where it was surplus to requirements.

The unit powers up but is missing both its CPU and LAN card.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 380.00 (ex. VAT) 1 in stock

NAPCO Model 5430 CO2 Incubator Double Stack Lab

ITEM-38930

NAPCO Model 5430 CO2 Incubator Double Stack

These were removed from a university lab where they were surplus to requirements.

We had both units professionally serviced. The bottom unit is working but the top one is faulty. A full report is available on request.

They are sold for spares/repairs.

SPARES/REPAIR ITEM

£ 360.00 (ex. VAT) 1 in stock

Sigma 6K15 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39753

This Sigma 6K15 Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but shows "Error 43 (Inbalance offset error)".

It is in good cosmetic condition with minor marks.

Sigma 6K15 Refrigerated Centrifuge

Model: 6K15

Serial#: 89779

Year: 2002

Capacity max: 6x500ml

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Scotsman AF 80 Laboratory Ice Machine Spares/Repair Lab

ITEM-48599

Scotsman AF 80 Laboratory Ice Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing it failed to cool.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Hoshizaki Laboratory Ice Maker Flaker Machine Model - FM-120DE Faulty

ITEM-35970

Hoshizaki Laboratory Ice Maker Flaker Machine Model - FM-120DE

This was removed from a university lab where it was surplus to requirements.

The item powers up and is in reasonably good cosmetic condition.

When powered up the item generates ice but it leaks through a crack in the outlet, therefor sold as Spares/Repairs.

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Stuart SI500 Orbital Incubator Lab Spares/Repairs

ITEM-42274

Stuart SI500 Orbital Incubator

This item was removed from a university where it was surplus to requirements.

The unit powers on and heats to a temperature of 37˚C (thermometer not included); however, the shaking platform exhibits issues with inconsistent speed and noticeable vibrations at higher RPMs.

Manual inspection suggests possible bearing wear or damage. Both PCB boards were removed.

Therefore, it is listed as Spares/Repair.

It is in good cosmetic condition.

Specifications:

Model: SI500
Serial No.: R000100080

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Applied Biosystems Mariner Biospectrometry Spectrometer Workstation Mass Spec

ITEM-19492

This Applied Biosystems Mariner Biospectrometry Spectrometer Workstation was removed from a university lab where it was surplus to requirements.

All the parts are in good cosmetic condition but do have various marks and signs of general use.

The unit powers up but makes a burning smell. It is sold for spares/repairs.

The system consists of:

1 x Applied Biosystems Mariner Bispectrometry Spectrometer.

Also comes with various extra parts;

2 x Electrospray units.

1 x Nanospray unit in a box with 2 x Genwac Cameras attached.

1 x 'Electronics box' from old Mariner.

1 x Bag of spare fuses.

1 x Waste Bottle.

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

VWR DuoCycler Thermal Cycler - Spares/Repair Lab

ITEM-47682

VWR DuoCycler Thermal Cycler

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear.

However, during testing the display briefly flashes with white and black lines before going blank, therefore, it could not be tested further and it is listed as Spares/Repair.

Model: DuoCycler

Reference: VWRI732-1201

Serial No.: 1201-10117

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Dry Tac JetMounter Laminator Model JM53 Max Working Width - 1350mm Spares/Repair

ITEM-46980

JetMounter Laminator Model JM53 Max Working Width - 1350mm

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however the previous owner has noted the following issues.

Issues:

The tension adjustment dial is loose
The unit does not operate in Auto Reverse mode, though Reverse mode functions correctly when using the foot pedal

While these issues do not render the unit entirely non-functional, it is being sold as Spares/Repair due to the faults listed above.

Includes:

Foot pedal
Power cable

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Amersham Biosciences P-900 Pump FPLC - Spares/Repair Lab

ITEM-46799

Amersham Biosciences P-900 Pump FPLC - Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, however during testing the error code: Number 111 appeared, preventing further use.

Therefore, it is listed as Spares/Repair.

Workshop

Filters