Explore our Workshop category for a range of spare parts, repair items, and budget-friendly used equipment. Here, you'll find pre-owned items from various categories that may need repair or servicing, all offered at highly accessible prices.


Perfect for those looking for cost-effective solutions, each item has undergone a basic inspection. Please note that some products may require further servicing or repair to be fully functional for research, industrial, or laboratory applications.

Items 251 to 300 of 335

Image of Rodwell Ensign 125 Floor Standing Autoclave Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Floor Standing Autoclave Spares/Repair Lab

ITEM-42378

Rodwell Ensign 125 Floor Standing Autoclave


This item was removed from a university laboratory where it was surplus to requirements.


Service and condition notes are as follows:


  • Unit powered on and lid opened without issue.
  • Evidence of the low water probe shorting onto the outside element, causing the machine to heat with low or no water.
  • All three heating elements were tested and found to be open circuit.
  • Three elements and the low water probe will need to be replaced.
  • It is advised that the unit be delivered to a specialist workshop if repair is to be undertaken.

Due to the faults identified, this item is listed as Spares/Repair.


Includes:


  • 1 x USB memory stick
  • 1 x inner basket

Specifications:


  • Model: Ensign 125
  • Serial No.: 2405
  • Year: 2015

  • Chamber dimensions: 46 cm diameter, 72 cm deep

Image of JK Lasers Class 4 MS20 Laser & Accessories Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

JK Lasers Class 4 MS20 Laser & Accessories Lab

ITEM-18384

This JK Lasers Class 4 MS20 Laser was removed from a university lab where it was surplus to requirements.


The unit came to us with a warning notice on it saying it is strictly not to be used or powered up under any circumstances. We suspect the university was removing it from their facilities for H&S reasons.


It is in reasonably good cosmetic condition but has some glue residue on the top of it and the wheels are stiff. There was also no key for the unit so we could not open the cabinet.


Lot contains:

1 x JK Lasers Class 4 MS20 Laser.

1 x Metal Plate.

1 x Shutter/Fire Switch.

1 x YAG Laser Flashlamp/Q-Switch Controller Glued Together.


The unit is sold for spares/repairs. We can only accept business customers for this item and any potential customer will be required to sign a disclaimer during purchase.


All offers considered on the unit.




Image of Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48666

Percival I-30VL Floor Standing Growth Chamber


This item was removed from a university laboratory where it was surplus to requirements.


It powers on, but the main control panel display is not functioning, so conditions cannot be set.


For this reason, it is listed as Spares/Repairs.


Supplied with a user manual.


Image of Percival Model I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival Model I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48669

Percival Model I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university where it was surplus to requirements.


It is in reasonably good cosmetic condition, however, during testing the display screen did not power on, and the plug was found to be faulty.


As a result, it is sold as Spares/Repair.

Image of Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48668

Percival I-30VL Floor Standing Growth Chamber Lab


This item was removed from a university laboratory where it was surplus to requirements.


The unit it in good cosmetic condition and powers on, however, the main control panel does not display, preventing further testing.


Therefore, it is listed as Spares/Repair.


Includes:

  • Intellus Web Server Manual
  • WeatherEze Software Manual

Model: I-30VL

Image of Percival - I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival - I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48670

Percival - I-30VL Floor Standing Growth Chamber Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It in reasonably good cosmetic condition and powers on, however, during testing it failed to heat.


Therefore, it is listed as Spares/Repair.

Image of Percival I-30VL Floor Standing Growth Chamber - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber - Spares/Repair Lab

ITEM-48672

Percival Type I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in good cosmetic condition, however the display screen does not function.


It is therefore listed as spares/repair.

Image of Percival Type I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival Type I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48671

Percival Type I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in good cosmetic condition, however the display screen does not function. It is therefore listed as spares/repair.


Includes:

  • User Manual
  • IntellusUltra & IntellusUltra Connect Controller Manual

Model: Type I-30VL

Image of Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48675

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however there is no display on the control panel.


Therefore, it is listed as Spares/Repair.

Image of Percival I-30VL Floor Standing Growth Chamber S/R Laboratory

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber S/R Laboratory

ITEM-48674

Percival Type I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in good cosmetic condition, however the display screen does not function.


It is therefore listed as spares/repair.


Includes;


  • User Manual
  • Intellus Ultra Controller Manual

Image of Stuart SI50 Shaking Orbital Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Stuart SI50 Shaking Orbital Incubator Lab Spares/Repairs

ITEM-45366

Stuart SI50 Shaking Orbital Incubator


This item was removed from a university laboratory where it was surplus to requirements.


The incubator powers on momentarily; however, the mains button for the shaker is stuck, causing the unit to power on and off intermittently.

Additionally, one hinge on the door is broken. The display screen is functional, and the unit is in relatively good cosmetic condition.


Due to its temperamental functionality, this item is listed as Spares/Repair.


Specifications.

  • Model: S150
  • Serial No.: 5413

Image of Kendro Heraeus HERAcell 150 CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Kendro Heraeus HERAcell 150 CO2 Incubator Lab Spares/Repairs

ITEM-46285

Kendro Heraeus HERAcell 150 CO2 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and powers on, however it did not rise in temperature during testing. The former owner reported a motherboard fault.


Therefore, it is listed as Spares/Repair.

Image of Heraeus CO2 Incubator BB6220 Lab Oven - Spares / Repairs Faulty CO2 Sensor Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator BB6220 Lab Oven - Spares / Repairs Faulty CO2 Sensor Lab

ITEM-47142

Heraeus CO2 Incubator BB6220 Lab Oven - Spares / Repairs Faulty CO2 Sensor Lab


This item was removed from a university lab where it was surplus to requirement.


It is in reasonably good cosmetic condition and has been successfully temperature tested, however further testing could not be conducted due to it having a faulty CO2 sensor.


Therefore, it is listed as Spares/Repair.

Image of LMS 250 Refrigerated Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

LMS 250 Refrigerated Incubator - Spares/Repair Lab

ITEM-43009

LMS 250 Incubator


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and was successfully temperature tested to 37ºc & 50ºc, however it failed to cool to it's minimum of -10ºc.


Therefore, it is listed as Spares/Repair.

Image of Leec GA2000 CO2 Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Leec GA2000 CO2 Incubator - Spares/Repair Lab

ITEM-48547

Leec GA2000 CO2 Incubator - Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however, during testing it failed to heat to 37ºc.


Therefore, it is listed as Spares/Repair.

Image of Biochrom Type Libra S6 Lab Spectrophotometer

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 240.00 (ex. VAT) 1 in stock

Biochrom Type Libra S6 Lab Spectrophotometer

ITEM-41406

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed the self-diagnostics test due to 'general system failure'



Image of Syngene GeneFlash UGenius Gel Documentation System Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 235.00 (ex. VAT) 1 in stock

Syngene GeneFlash UGenius Gel Documentation System Spares/Repairs

ITEM-34603

Syngene GeneFlash UGenius Gel Documentation System


This was removed from a university lab where it was surplus to requirements.


The system is in working order but the camera does not power up.


System: Microsoft Windows XP Professional.

       Version: 2002.

       Service Pack 3.

       Software: U:Genius version - 1.0.2.0.


It is sold for spares/repairs due to the faulty camera.


Image of Biochrom Model Type Libra S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 230.00 (ex. VAT) 1 in stock

Biochrom Model Type Libra S6 Spectrophotometer Lab

ITEM-41405

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed the self-diagnostics test due to 'general system failure'



Image of Biochrom Type Libra Model S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 230.00 (ex. VAT) 1 in stock

Biochrom Type Libra Model S6 Spectrophotometer Lab

ITEM-41403

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed the self-diagnostics test due to 'general system failure'



Includes 9V DVC Power Cable.

Image of Biochrom Model Type Libra S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 225.00 (ex. VAT) 1 in stock

Biochrom Model Type Libra S6 Spectrophotometer Lab

ITEM-41402

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed the self-diagnostics test due to 'general system failure'



Image of Biochrom Libra Model S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 220.00 (ex. VAT) 1 in stock

Biochrom Libra Model S6 Spectrophotometer Lab

ITEM-41401

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed the self-diagnostics test due to 'general system failure'


Image of Biochrom Libra S6 Model Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 215.00 (ex. VAT) 1 in stock

Biochrom Libra S6 Model Spectrophotometer Lab

ITEM-41400

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed 'wavelength calibration' on the self-diagnostics test.


Image of Thermo Scientific Model Heraeus Fresco 21 Centrifuge Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 210.00 (ex. VAT) 1 in stock

Thermo Scientific Model Heraeus Fresco 21 Centrifuge Spares/Repair Lab

ITEM-48585

Thermo Scientific Heraeus Fresco 21 Centrifuge


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in fair cosmetic condition, but some rust remains in the chamber. The unit produces a loud grinding noise with the rotor fitted, likely due to failed bearings.


Due to these issues, it is listed as Spares/Repair.


Model: Fresco 21

Image of Biochrom Model Libra S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 210.00 (ex. VAT) 1 in stock

Biochrom Model Libra S6 Spectrophotometer Lab

ITEM-41399

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed 'wavelength calibration' on the self-diagnostics test.



Image of Biochrom Libra Type S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 205.00 (ex. VAT) 1 in stock

Biochrom Libra Type S6 Spectrophotometer Lab

ITEM-41398

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed 'general system failure' on the self-diagnostics test.



Image of Thermo Scientific Heraeus Fresco 21 Centrifuge Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Fresco 21 Centrifuge Spares/Repair Lab

ITEM-48584

Thermo Scientific Heraeus Fresco 21 Centrifuge


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in fair cosmetic condition, but some rust remains in the chamber. The unit produces a loud grinding noise with the rotor fitted, likely due to failed bearings.


Due to these issues, it is listed as Spares/Repair.


Model: Fresco 21

Image of Astec Microflow Class 2 Safety Cabinet Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Astec Microflow Class 2 Safety Cabinet Lab Spares/Repairs

ITEM-44698

Microflow Class 2 Safety Cabinet


This system was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition and powers on.

However, an issue has been identified: the alarm sounds continuously. Pressing the alarm silence button stops it for only one minute before it resumes.


Due to fault, this item is listed as Spares/Repair.

Image of ELGA PURELAB Option-Q DV25 2008 - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

ELGA PURELAB Option-Q DV25 2008 - Spares/Repair Lab

ITEM-48473

ELGA PURELAB Option-Q DV25 2008 – Spares/Repair Lab


This item was removed from a university laboratory where it was surplus to requirements.


It is in reasonably good cosmetic condition; however, a board fault prevents the module from operating.


Therefore, it is listed as Spares/Repair.

Image of New Brunswick Scientific C24KC Refrigerated Shaking Incubator S/R Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

New Brunswick Scientific C24KC Refrigerated Shaking Incubator S/R Lab

ITEM-48566

New Brunswick Scientific C24KC Refrigerated Shaking Incubator S/R Lab


This item was removed from a university where it was surplus to requirements.


It is in reasonably good cosmetic condition and powers on, however the shaking element does not work.


Therefore, it is listed as Spares/Repair.

Image of Nutool Power DP16 Pillar Drill Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Nutool Power DP16 Pillar Drill Spares/Repairs

ITEM-47405

Nutool Power DP16 Pillar Drill


This item was removed from a university workshop where it was surplus to requirements.


In good used cosmetic condition with areas of surface rust.


The unit is fitted with a single cable terminating in a female IEC connector. The wiring may have been modified by a previous owner, and the unit tripped a circuit breaker during testing.


Therefore, it is listed for spares or repair.

Image of Ecocell 55 Laboratory Oven Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Ecocell 55 Laboratory Oven Spares/Repair Lab

ITEM-46898

Ecocell 55 Oven/Incubator


This item was removed from a university laboratory where it was surplus to requirements.


It is in good cosmetic condition and powers on and reaches 37.0ºC without issues.


However, it trips out when the temperature approaches 125-130ºC, preventing it from reaching its maximum temperature of 250ºC.


Due to this issue, it is being sold as spares or repairs.

Image of Intermed Microflow Pathfinder Class 2 Biological Safety Cabinet - Spares/Repair

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Intermed Microflow Pathfinder Class 2 Biological Safety Cabinet - Spares/Repair

ITEM-46617

Intermed Microflow Pathfinder Class 2 Biological Safety Cabinet - Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It powers on, with internal lights working. The UV light can be selected, but it does not appear to be fitted. The velocity control is functional. The air velocity gauge is broken, and the base doesn't seem to fit properly. The table is heavily stained, but this would not be visible with the cabinet on top.


Due to the faulty air velocity gauge and cosmetic condition, this item is listed as Spares/Repair.


Run hours: 33,032.0

Image of LiftSafe 30KG Electric Work Positioner Spares/Repair

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

LiftSafe 30KG Electric Work Positioner Spares/Repair

ITEM-46224

LiftSafe 30KG Electric Work Positioner


This item was removed from a university laboratory where it was surplus to requirements.


The item is in poor cosmetic condition, with significant rust and stiff wheels. Additionally, it did not pass the visual PAT due to exposed wires.


Therefore, it is listed as Spares/Repair.

Image of UVP M-26 BioDoc-It System UV Transilluminator Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

UVP M-26 BioDoc-It System UV Transilluminator Spares/Repairs

ITEM-45544

UVP M-26 BioDoc-It System UV Transilluminator With Mitsubishi Printer


This item was removed from a university laboratory where it was surplus to requirements.


The transilluminator powers on and is in fair cosmetic condition. However, several issues prevent full functionality:


  • Screen is non-functional
  • Internal light does not work
  • Printer displays an "EO code - Remote controller transmission error"
  • Door is stuck and will not open

Due to the faults listed above, this item is listed as Spares/Repair.

Image of Bio-Rad Gel Doc 2000 Universal Hood UV Gel Imaging System Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Bio-Rad Gel Doc 2000 Universal Hood UV Gel Imaging System Lab

ITEM-45510

Bio-Rad Gel Doc 2000 Universal Hood UV Gel Imaging System Lab


This system was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition but has not been powered on due to it failing PAT on Earth Continuity.


Therefore, it is listed as Spares/Repair.


Image of Jouan CR3i Refrigerated Benchtop Centrifuge With T4 Rotor Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Jouan CR3i Refrigerated Benchtop Centrifuge With T4 Rotor Lab

ITEM-45414

Jouan CR3i Refrigerated Benchtop Centrifuge With T4 Rotor


This item was removed from a university where it was surplus to requirements.


The centrifuge is in good cosmetic condition, powers on but has operational faults:-

The display screen glitches and provides incorrect RPM readings, followed by an error message (no code provided).


Therefore, further testing could not be conducted and it is listed as Spares/Repair.


Includes:

  • T4 Swinging Bucket Rotor with 4 x buckets

Specifications:

  • Model: CR3i
  • Serial No.: 01400029


Image of Bunn Dual TF DBC Bulk Brewing Machine

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Bunn Dual TF DBC Bulk Brewing Machine

ITEM-44405

Bunn Dual TF DBC Bulk Brewing Machine


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition, we are unable to test it as the power supply cable is not attached.


Therefore, it is listed as Spares/Repair.

Image of Biochrom Type Libra S6 Spectrophotometer Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Biochrom Type Libra S6 Spectrophotometer Lab

ITEM-41397

Biochrom Libra S6 Spectrophotometer Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The item failed 'wavelength calibration' on the self-diagnostics test therefore, it is listed as Spares/Repair.



Image of Digicen 21 Table Top Centrifuge w/ RT 138 5000 rpm Rotor Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Digicen 21 Table Top Centrifuge w/ RT 138 5000 rpm Rotor Lab

ITEM-37352

Digicen 21 Table Top Centrifuge Lab


This item was removed from a university laboratory where it was surplus to requirements.


The unit powers on but has a damaged internal chamber with significant denting.

Additionally, it displays a lid lock error.


It is listed for spares or repairs.


There is a large graffiti mark on the top


Includes:

  • Ortoalresa RT 138 Swing-Out Rotor
  • Max RPM: 5000

Image of Perkin Elmer Wallac 1450 Microbeta Trilux Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Perkin Elmer Wallac 1450 Microbeta Trilux Lab Spares/Repairs

ITEM-31864

Perkin Elmer Wallac 1450 Microbeta Trilux Scintillation & Luminescence Counter


This was removed from a university lab where it was surplus to requirements.


The unit powers up but is not in working order due to  rust, boot failure, fault code on DCE board and missing a stepper motor.


It is in reasonably good cosmetic condition with marks from use and some light rust on the back panel.


It is sold for spares/repairs.



Image of Thermo Fresco 17 Centrifuge Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Thermo Fresco 17 Centrifuge Spares/Repair Lab

ITEM-31555

Thermo Fresco 17 Centrifuge


This item was removed from a university laboratory where it was surplus to requirements.


It does not power on, and the unit has a non-functional lid that does not close.


Additionally, the display has been removed. Therefore, it is listed for Spares/Repair.

Image of Eppendorf Benchtop Laboratory Centrifuge Model 5417C with 14000rpm Rotor Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Eppendorf Benchtop Laboratory Centrifuge Model 5417C with 14000rpm Rotor Lab

ITEM-19547

This Eppendorf Benchtop Laboratory Centrifuge Model 5417C with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.


The unit powers up but has developed a lid fault and is sold for spares/repairs.


It is in reasonably good cosmetic condition with some marks from use. The unit has had a brand-new power switch fitted. The seal is in reasonable condition but may benefit from a replacement being fitted.


The rotor accomodates 2mL tubes.








Image of Thermo MaxQ 2000 Model 4315 Platform Shaker Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Thermo MaxQ 2000 Model 4315 Platform Shaker Lab Spares/Repairs

ITEM-42169


Thermo MaxQ 2000 Model 4315 Platform Shaker


This item was removed from a university lab where it was surplus to requirements.


It is in very good cosmetic condition and powers on, displaying time and rpm on the digital displays.

However, the shaker did not start due to a broken drive belt.


Therefore, it is listed as Spares/Repair.


Specifications:

  • Inner platform: 28 x 28 cm
  • Outer platform extender: 45 x 45 cm
  • Speed: 15 - 500 rpm
  • Timer: 1 minute to 999 hours

Model: 4315

Serial No.: 104480-379

Year: 2014

Image of CAS Biological Safety Cabinet Model C1YD719ASS - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

CAS Biological Safety Cabinet Model C1YD719ASS - Spares/Repair Lab

ITEM-47619

CAS Biological Safety Cabinet Model C1YD719ASS


This item was removed from a university laboratory where it was surplus to requirements.


It is in good condition and powers on, however, the display screen does not show any information despite lighting up. The only button on the panel that responded was the UV button, and no other functions could be tested. (Internal socket tester not included.)


Additionally, It failed the visual PAT inspection due to a missing key/lock, where wiring could be accessed.


Due to the reasons stated above, this cabinet is listed as Spares/Repair.


Model: C1YD719ASS

Serial No.: C1396-10

Image of HIPROVE XD-202 Inverted Biological Microscope w/ 4 x Objectives - Spares/Repair

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

HIPROVE XD-202 Inverted Biological Microscope w/ 4 x Objectives - Spares/Repair

ITEM-48861

HIPROVE XD-202 Inverted Biological Microscope w/ 4 x Objectives - Spares/Repair


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however there is no lamp fitted.


It is therefore listed as Spares/Repair.


Includes;


Objectives;

  • L40X/0.55PH WD2.2 objective
  • L20X/0.40PH WD3.1 objective
  • 10X/0.25PH WD6.2 objective
  • 4X/0.10 WD22.3 objective

Eyepieces;

  • 2 x WF10X/20 Eyepieces

  • GXCAM-3 GT Vision S/N T3003130 3.0MP USB Camera


Image of Syngene G-Box Model-680X HR Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Syngene G-Box Model-680X HR Lab Spares/Repairs

ITEM-45258

Syngene G-Box Model-680X HR


This item was removed from a university lab where it was surplus to requirements.


The main unit powers on, but the transilluminator only activated briefly before cutting out and could not be restarted. The internal UV bulbs also failed to turn on during testing.


There is an issue with the front door mechanism; it sometimes locks properly, but at other times it fails, leaving the door open.


Due to the issues listed above, this item is listed as Spares/Repair.


Specifications:

  • Model: 680X HR
  • Serial No.: SYOR41450

Image of Laboratory Thermal Equipment Incubator (White) Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Laboratory Thermal Equipment Incubator (White) Lab

ITEM-46077

Laboratory Thermal Equipment Incubator (White) Lab


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and heats up, but due to the absence of a display to confirm temperature settings, it could not be fully tested.


It is in fairly poor cosmetic condition.


Due to these testing limitations, it is listed for spares or repair.

Image of Gallenkamp IPR150.XX1.5 Laboratory Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Gallenkamp IPR150.XX1.5 Laboratory Incubator Spares/Repair Lab

ITEM-46905

Gallenkamp IPR150.XX1.5 Laboratory Oven Lab


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in reasonably good cosmetic condition. However, during testing, the display screen was erratic, jumping between numbers, which prevented further testing.


This item is listed as Spares/Repair.

Image of Gallenkamp Cooling Shaking Incubator INR-250 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

Gallenkamp Cooling Shaking Incubator INR-250 Lab Spares/Repairs

ITEM-37225

Gallenkamp Shaking Incubator INR-250 Lab


This item was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order at 37ºc and 70ºc (thermometer not included).


However, despite being labelled as a cooling incubator, it did not lower in temperature when set to 0ºc.

Therefore, it is listed as Spares/Repair.


The unit is in poor cosmetic condition.


Specifications:

  • Category No.: INR-250-010


Image of RS Biotech Mini Galaxy A Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 200.00 (ex. VAT) 1 in stock

RS Biotech Mini Galaxy A Incubator Lab Spares/Repairs

ITEM-45217

New Brunswick Scientific Mini Galaxy A Incubator


This item was removed from a university lab where it was surplus to requirements.


The incubator powers on and reaches set temperatures. (Thermometer not included)


Please note that the screen is not very clear or bright. The client has noted a suspected faulty oxygen sensor.


Due to these faults, this incubator is listed as Spares/Repair.


Model: Mini Galaxy A

Serial No.: 14686

Items 251 to 300 of 335

Filters

Price (£)

to

Condition