Engineering

£ 1,000.00 (ex. VAT) 1 in stock

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller Lab

ITEM-35544

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller

This was removed from a university lab where it was surplus to requirements.

Everything powers up but has not been tested further.

The PC contains quite a lot of software.

The programs that are relevant to the system are:

MicroWriter ML Version 2.11.11.0.

Thorlabs apt configuration utility v2.2.5389 14611.

MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system

The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Inoxpa Pharmix 75L Sterile Stainless Steel Mixing Kettle

ITEM-46912

Inoxpa Pharmix 75L Sterile Stainless Steel Skid Mounted Mixing Kettle Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonable cosmetic condition.

The weighing scales on the item function correctly and register weight changes within the main vessel.

However, other components such as the pump and the main vessel's blade do not function, and no further power is evident.

Therefore, it is listed as Spares/Repair.

Includes:

Main vessel with weighing scales

£ 1,000.00 (ex. VAT) 1 in stock

Atac Machinery F 350 Laboratory Type Vertical Padder

ITEM-54609

Atac Machinery F 350 Laboratory Type Vertical Padder

This system is sold on behalf of a client where it is surplus to requirement.

It is in good working order having been lightly used.

A vertical laboratory padder designed for controlled application of liquids to textile or material samples, typically used in R&D, coating, and finishing processes.

This type of equipment is commonly utilised for simulating industrial padding processes on a smaller scale, ensuring consistent impregnation and expression of solutions across substrates.

Specifications;

General Material: Cr-Ni Stainless Steel
Roller width: 350 mm
Roller Diameter: 120 mm
Max. Working width: 300 mm
Roller Hardness: 70 shore
Roller Pressure : 0,5 - 6 Bar (Liner Adjustable)
Roller Speed :1-9 m/min.
Bath Capacity on Roller surface : 1250 ml
Necessary Air Pressure: 6 Bar
Total Power: 0,85 kW
Power Supply: 220V, 50HZ
Weight: 95 kg

£ 910.00 (ex. VAT) 1 in stock

ATI Portasens III Gas Leak Detector Kit Model D16 w/ H2O2 Sensor Lab

ITEM-38095

ATI Portasens III Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x calibration t-fitting

1 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 900.00 (ex. VAT) 1 in stock

Loveshaw Little David LD19PT Box Case Taping Machine

ITEM-46231

Loveshaw Little David LD19PT Box Taping Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing.

£ 890.00 (ex. VAT) 1 in stock

ATI Portasens III Gas Leak Detector Model No. D16 with H2O2 Sensor Lab

ITEM-38096

ATI Portasens III Gas Leak Detector Model No. D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up, we are unable to test it further at our facility.

Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Tenenergy 10,000 mAh NiMH rechargeable battery

1 x calibration t-fitting

3 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 850.00 (ex. VAT) 1 in stock

Vaisala Temperature Logger VL-1416-44V with Moxa Nport W2150A Lab

ITEM-42499

Vaisala Temperature Logger VL-1416-44V with Moxa Nport W2150A Wireless Serial Device Server

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in great condition with no wear. We are unable to test it further at our facility.

Includes:

2 x Vaisala Temperature Logger VL-1416-44V
Serial No.: 21481031
Serial No.: 21481029
Moxa Nport W2150A Wireless Serial Device Server
Model: W2150A
Serial No.: N/A
7 x Temperature probes with metal casings
12V power supply

£ 830.00 (ex. VAT) 1 in stock

Agilent E4426B ESG-AP Series Signal Generator

ITEM-53838

Agilent E4426B ESG-AP Series Signal Generator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Firmware revision: B.03.50
Firmware date: June 16 2000
Total hours on: 27211.8
Total hours display has been on: 26414.1
Total power cycles: 309
Attenuator cycles: 6266
Reverse power protection trips: 0

£ 820.00 (ex. VAT) 1 in stock

Agilent E4426B ESG-AP Series Signal Generator

ITEM-53837

Agilent E4426B ESG-AP Series Signal Generator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

There are a couple of scratches on the top of the unit (as shown in photos).

Firmware revision: B.03.86
Firmware date: April 29 2002
Total hours on: 56598
Total hours display has been on: 2496.9
Total power cycles: 355
Attenuator cycles: 39620

£ 810.00 (ex. VAT) 1 in stock

Agilent E4426B ESG-AP Series Signal Generator

ITEM-53835

Agilent E4426B ESG-AP Series Signal Generator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: It is missing one of its legs.

Firmware revision: B.03.51
Firmware date: September 11 2000
Total hours on: 25487.6
Total hours display has been on: 25487.6
Total power cycles: 246
Attenuator cycles: 15955
Reverse power protection trips: 3

£ 800.00 (ex. VAT) 1 in stock

Invitrogen ZOOM Dual Power High and Low Voltage Power Supply Model ZP10002 Lab

ITEM-50088

Invitrogen ZOOM Dual Power High and Low Voltage Power Supply Model ZP10002 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition with some surface damage to the display screen, though this does not affect its functionality.

It powers on, we are unable to test it further at our facility.

£ 800.00 (ex. VAT) 1 in stock

Schmidt Presse 11F-06-2012 Manual Press

ITEM-51226

Schmidt Presse 11F-06-2012 Manual Press

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 800.00 (ex. VAT) 1 in stock

Trilogy Commander Digital Intercom TalkBack Double Main Frame

ITEM-46420

Trilogy Commander Digital Intercom TalkBack Double Main Frame

This item was removed from a facility where it was surplus to requirements.

The unit powers up as expected but has not been tested further.

Includes:

PREH Commander MultiMedia Keyboard

The unit is a PAT fail visually because of the missing blanking plates on the back.

£ 800.00 (ex. VAT) 1 in stock

Slee London Model DS Vacuum Vice Precision Measuring Tool w/ DTI Gauge

ITEM-45321

Slee London Model D2 Vacuum Vice Precision Measuring Tool DTI

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good mechanical order, we are unable to test it fully at our facility.

It features an external vacuum connector valve and a DTI gauge.

£ 800.00 (ex. VAT) 1 in stock

2 x TMC Transformers Types 91012-2 and 81020-1 Stepdown 230v to 24v

ITEM-42986

Job Lot of Two TMC Transformers Types 91012-2 and 81020-1 Stepdown 230v to 24v

These items were removed from a facility where they were surplus to requirement.

Both are in good cosmetic condition and remain untested due to testing limitations at our facility.

TMC Ltd Type 91012-2

Input 230 volts 1ph. 50/60Hz

Output 24 volts 250 amps 6000va

TMC Ltd Type 81020-1

Input 230 volts 1ph. 50/60Hz

Output 24 volts 300 amps

Both fitted with Mennekes 32A-6h 7-pin 3 phase socket

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific VisionMate ST Single Tube Barcode Reader Lab

ITEM-46494

Thermo Scientific VisionMate ST Single Tube Barcode Reader Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

USB
User Manual

£ 800.00 (ex. VAT) 1 in stock

ATI Portasens III Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

ITEM-38093

ATI Portasens III Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 760.00 (ex. VAT) 1 in stock

Hewlett Packard E4426B ESG-AP Series Signal Generator

ITEM-53841

Hewlett Packard E4426B ESG-AP Series Signal Generator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Firmware revision: B.03.50
Firmware date: June 16 2000
Total hours on: 58038.1
Total hours display has been on: 9753.9
Total power cycles: 431
Attenuator cycles: 16545

£ 750.00 (ex. VAT) 1 in stock

Ametek PowerVar Sinergy III Model ACDEF2000-22

ITEM-46465

Ametek PowerVar Sinergy III Model- ACDEF2000-22

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Ametek PowerVar Sinergy III Model- ACDEF2000-22

ITEM-46464

Ametek PowerVar Sinergy III Model- ACDEF2000-22

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Jun-Air Compressor Model 12-40

ITEM-43051

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

Pressure: 12.2 bar
Minimum Operating Temperature: 10°C
Maximum Operating Temperature: 50°C

£ 750.00 (ex. VAT) 1 in stock

Soft Glass Drop Tower Access Platform / Fibre Drawing Furnace Operator Stand

ITEM-55065

Soft Glass Tower Access Platform / Fibre Drawing Furnace Operator Stand

This item was removed from a facility where it was surplus to requirement.

Previously used as part of a soft glass fibre drawing tower setup alongside a low temperature furnace for drawing soft glass optical fibres.

This unit provides a stable elevated working position for loading and aligning glass preforms into vertically mounted furnaces.

The structure is a heavy-duty steel access platform with integrated anti-slip steps and handrail, designed for safe operator access at height during fibre drawing processes.

£ 750.00 (ex. VAT) 1 in stock

Taylor Hobson Model K Pantograph Engraver 110.902.324

ITEM-48758

Taylor Hobson Model K Pantograph Engraver 110.902.324

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and appears to be in good working order.

There are various marks and signs of use.

£ 750.00 (ex. VAT) 1 in stock

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

ITEM-36247

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

£ 750.00 (ex. VAT) 1 in stock

Drager X-am 8000 Multi Gas Detector with CO₂/H₂S/NH₃/NO Sensors

ITEM-49563

Drager X-am 8000 Multi Gas Detector with CO₂/H₂S/NH₃/NO Sensors

This item is sold on behalf of a client. It is surplus to requirement.

It is In full working order, purchased new in 2021.

Includes:

CO₂ sensor
H₂S sensor
NH₃ sensor
NO sensor

It is available for collection from Preston UK.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 750.00 (ex. VAT) 1 in stock

Hewlett Packard E4426B ESG-AP Series Signal Generator

ITEM-53840

Hewlett Packard E4426B ESG-AP Series Signal Generator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Firmware revision: B.03.60
Firmware date: November 17 2000
Total hours on: 54739.4
Total hours display has been on: 45681.9
Total power cycles: 372
Attenuator cycles: 1107770

NEW ITEM

£ 750.00 (ex. VAT) 1 in stock

Bronkhorst EL-FLOW Prestige Mass Flow Controllers – Nitrogen, Hydrogen & Helium

ITEM-58385

Bronkhorst EL-FLOW Prestige Mass Flow Controllers – Nitrogen, Hydrogen & Helium

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The lot comprises three Bronkhorst EL-FLOW Prestige mass flow controllers configured for Nitrogen, Hydrogen and Helium gas applications.

The Bronkhorst EL-FLOW Prestige series is designed for precise gas flow measurement and control within laboratory, research and process development environments.

The units are supplied used and without original packaging.

The client has advised they are able to package the equipment for transport if required.

Includes;

1 x Bronkhorst EL-FLOW Prestige – Nitrogen
1 x Bronkhorst EL-FLOW Prestige – Hydrogen
1 x Bronkhorst EL-FLOW Prestige – Helium
100 sccm maximum flow rate
30 bar maximum pressure
NC control valves fitted
Power and connection cables for all units

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

£ 730.00 (ex. VAT) 1 in stock

WESCOR HR-33T Dew Point Microvoltmeter Lab

ITEM-52411

WESCOR HR-33T Dew Point Microvoltmeter Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

£ 710.00 (ex. VAT) 1 in stock

Adhere Hydraulic Mixer Model ECDQ2B32-100D Lab

ITEM-50447

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

£ 705.00 (ex. VAT) 1 in stock

Jun-Air 4000-40M Cabinet Compressor Lab

ITEM-47757

Jun-Air 4000-40M Cabinet Compressor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear.

The unit successfully powered on and produced airflow from the outlet valve at 2 Bar (25 PSI). Run hours recorded at 8424. Fitted with a 3-pin 16 Amp blue plug.

Includes:

Jun-Air motor Model 2000-US1 (Max 10 Bar, Motor ID L11798)

Model: 4000-40M

Serial No.: 644866

£ 700.00 (ex. VAT) 1 in stock

ESEWAY Hardness Tester SPV2P Lab

ITEM-45098

ESEWAY Hardness Tester SPV2P

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Sairem Microwave Power Supply 2450 Mhz 300 W

ITEM-49055

Sairem Microwave Power Supply 2450 Mhz 300 W

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

ITEM-50446

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

£ 700.00 (ex. VAT) 1 in stock

Denford Microrouter V5 Pro CAM CNC System with Software

ITEM-44931

Denford Microrouter V5 Pro

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The vacuum pump is functional. However, we are unable to conduct further testing at our facility.

Included:

Denford Update Disc
Denford Disc
Denford QuickCam Pro CAM Software
Denford VR CNC Milling Software
Denford CNC Projects Suite Milling
Denford QuickCam 4D Milling CAM Software
User's Manual
Denford CAD/CAM Design Challenge

£ 700.00 (ex. VAT) 1 in stock

Pfeiffer TCP040 Power Supply Lab

ITEM-41313

Pfeiffer TCP040 Power Supply

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, it is untested as we are unable to test it further at our facility.

Run Time: 10797.0

£ 700.00 (ex. VAT) 1 in stock

Dräger X-am 5100 Gas Analyser Lab

ITEM-41865

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger Model X-am 5100 Gas Analyser Lab

ITEM-41866

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger Type X-am 5100 Gas Analyser Lab

ITEM-41867

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger X-am Model 5100 Gas Analyser Lab

ITEM-41868

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Agilent 33250A Function/Arbitrary Waveform Generator

ITEM-53846

Agilent 33250A Function/Arbitrary Waveform Generator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Banner Scientific Limited 010014 – 200mm – Single Speed Polisher

ITEM-53161

Banner Scientific Limited 010014 Polisher

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

1 x Spare lid
1 x Spare Roller Wheel Accessory Kit

Polishing discs;

1 x Silica Polishing Disc
1 x 1mm Alumina Polishing Disc
2 x Unknown Polishing Disc
2 x Base Plates

£ 700.00 (ex. VAT) 1 in stock

Betol Model 1307 Granulator Lab

ITEM-38029

Betol Model 1307 Granulator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Items details are as follows:

Model: 1307.

Serial No: A 5228.

Volts: 240.

Phase: 1.

Kw: 1.5.

£ 650.00 (ex. VAT) 1 in stock

STS STE03-DRV03 Drum Lifting Trolley

ITEM-46221

STS STE03-DRV03 Drum Lifting Trolley

This item was removed from a facility where it was surplus to requirements.

It appears to be in good cosmetic condition. Unable to test as it requires pressurised air.

£ 650.00 (ex. VAT) 1 in stock

Record WPE 100 Electric Work Positioner

ITEM-46225

Record WPE 100 Electric Work Positioner

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good condition, powers on and is in working order.

£ 650.00 (ex. VAT) 1 in stock

Specac Atlas Series Manual Hydraulic Press 15,001

ITEM-50989

Specac Atlas Series Manual Hydraulic Press 15,001

This item was removed from a facility where it was surplus to requirement.

In good mechanical order.

Please note: The screw knob on the top is damaged but usale

£ 650.00 (ex. VAT) 1 in stock

Rohde & Schwartz OSP 120 Open Switch and Control Unit

ITEM-53867

Rohde & Schwartz OSP 120 Open Switch and Control Unit

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

£ 600.00 (ex. VAT) 1 in stock

TesaTronic TTD 30 Tesa-13 Comparator Unit

ITEM-51495

TesaTronic TTD 30 Tesa-13 Comparator Unit

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

Buehler LTD Minimet Polisher 69-1000-250 Lab

ITEM-44627

Buehler LTD Minimet Polisher 69-1000-250 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

LiftSafe 60KG Electric Work Positioner

ITEM-46223

LiftSafe 60KG Electric Work Positioner

This item was removed from a facility where it was surplus to requirements.

It is in fairly poor cosmetic condition but in good working order.

£ 600.00 (ex. VAT) 1 in stock

STS Drum Lifting Trolley 60kg

ITEM-46226

STS Drum Lifting Trolley

This item was removed from a facility where it was surplus to requirements.

The STS Drum Lifting Trolley is in good cosmetic condition. It has not been powered on, as operation requires a compressor.

Therefore, it is untested.

Engineering

Filters