General Laboratory

£ 3,025.00 (ex. VAT) No longer available

New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator Lab

ITEM-29942

New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator

This item was removed from university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 3,015.00 (ex. VAT) 1 in stock

Neslab Cryocool Immersion Cooler CC-100 II Lab

ITEM-35995

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 3,000.00 (ex. VAT) 1 in stock

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab

ITEM-37194

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor.

The rotor is not included.

£ 3,000.00 (ex. VAT) 1 in stock

Boxer 300/150LR Steam Steriliser Autoclave Lab

ITEM-44966

Boxer 300/150LR Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit has one missing wheel and another damaged, so it is currently placed on a pallet with blocks. It also requires a plug to be fitted.

Working Condition: The previous client has stated that it was in working order prior to removal. We have not tested it at our facility due to the absence of the plug.

Specifications:

Model: 300/150LR
Serial No.: M2436/87772
Chamber Dimensions: Approximately 540mm diameter x 610mm long
Capacity: Approximately 150 liters
Internal Pressure: 38.7 psi @ 140°C
Power Supply: 415V, 3 phase, 50Hz

£ 3,000.00 (ex. VAT) 1 in stock

Perkin Elmer Janus Automated Workstation with Purair Advanced Ductless Fume Hood

ITEM-32009

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood

This system was removed from a university laboratory where it was surplus to requirements.

It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below:

The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. However, tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place.

There is no Software included with this system.

The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning.

Specifications:

Workstation Part No.: AJL8G01
Workstation Serial No.: DG11073293
Manufacture Date: November 2007
Last Service: 01-12-2022

Fume Hood:

Model: Purair P40
Serial No.: P93325
Internal Dimensions: L173 W109 H116 cm
Last Service: 09/08/2022

Accessories:

Box of Plate Holders.
Various Cables.
2 x Waste Bottles.
Waste Bin

The system is in reasonable used cosmetic condition, with two hinges needing replacement.

£ 3,000.00 (ex. VAT) 1 in stock

Metrohm 901 Titrando, 800 Dosino And 803 TI Stand With Accessories Lab

ITEM-44662

Metrohm 901 Titrando, 800 Dosino, and 803 TI Stand with Accessories

This system was removed from a university where it was surplus to requirements.

The system powers on and is in good working order. The 901 Titrando, 800 Dosino, and 803 TI Stand were tested with an in-house PC w/ software, and all components appeared to function as expected, including pH measurement, dosing, and stirring.

The PC used for testing is not included in the system.

The required software can be downloaded for free from the Metrohm website, but it will require a purchased licence after 30 days of use.

Included:

Metrohm 901 Titrando
Metrohm 800 Dosino
Metrohm 803 TI Stand
Control cable for PC interface

Specifications:

Model: 901 Titrando

Accessories: 800 Dosino and 803 TI Stand

Everything is in good cosmetic condition with some light signs of use.

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXp Laboratory Automation Workstation Lab

ITEM-42116

Beckman Coulter Biomek NXp Laboratory Automation Workstation

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition with some surface wear. According to the previous owner, the system is fully operational but was sold due to lack of use and space constraints.

This Biomek NXp was serviced in December 2023

Specifications:

Model: Biomek NXp
Serial No.: A318400876

Additional Components:

DFMZ Design Filtration Microzone
Model: DA1-1x2-2
Serial No.: 952213

Accessories Included:

Insert Pak 11mm Non-Sterile (Serial No.: 3364)
2 x Top Plate, Multi-Config Peltier ALP (Part No.: A32165 REV AA)
15 x Reservoirs, 75 ml, Case Sterile (Lot: P61122MPI)
Physical Manual: Version 3.3 Tutorial

£ 3,000.00 (ex. VAT) 1 in stock

SPEX SamplePrep Freezer/Mill 6770 Cryogenic Mill Lab

ITEM-45388

SPEX SamplePrep Freezer/Mill 6770 Cryogenic Mill

This item was removed from a university laboratory where it was surplus to requirements.

The mill powers on and is in fair cosmetic condition. We are unable to conduct further testing at our facility.

Specifications:

Model: 6770
Serial No.: 10305

£ 3,000.00 (ex. VAT) 1 in stock

Sigma Model 3-16KL Refrigerated Laboratory Centrifuge Lab

ITEM-45153

Sigma 3-16KL Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear, but this can be easily replaced and does not affect the unit's operation.

Functionality:

Powers up and runs as intended.
Tested at -10ºC and 37ºC, with temperatures reached as expected.

Included Accessories:

Bucket Adapters:
4 x Sigma 17355
4 x Sigma 17356
4 x Sigma 17358
4 x Sigma 17359
4 x Sigma 17362
4 x Sigma 17377
4 x Sigma 17190 lids for the buckets

Also included:

Instruction manual

£ 3,000.00 (ex. VAT) 1 in stock

Baker Hypoxycool Culture Media Hypoxia Conditioner Lab

ITEM-37960

Baker Hypoxycool Culture Media Hypoxia Conditioner

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility.

Internal dimensions 38 x 38 x 30cm (LxWxH)

£ 3,000.00 (ex. VAT) 1 in stock

Panasonic MDF-U500VX Ultra Low Temperature Freezer ULT Lab

ITEM-41762

Panasonic MDF-U500VX Ultra Low Temperature Freezer ULT

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

£ 3,000.00 (ex. VAT) 1 in stock

Julabo FL2506 Air Cooled Recirculating Chiller Lab

ITEM-38856

Julabo FL2506 Recirculating Chiller Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 3,000.00 (ex. VAT) 1 in stock

GE Asymptote VIA Thaw CB1000 Dry Automated Thawer

ITEM-37988

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing Lab

Serial No. TBA1118037

Software Version 1.3.17-06f731

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order. (Thermometer not included.)

Thawing temperature range: -196˚C to 0˚C

Thawing temperatures: 34˚C to 0˚C

Last calibration: 19.05.23

The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

£ 3,000.00 (ex. VAT) 1 in stock

PEAK Scientific Genius 1053 Nitrogen Generator Lab

ITEM-37206

PEAK Scientific Genius 1053 Nitrogen Generator Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

This item requires servicing before use, as the service light illuminates when powered on.

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek FXP Laboratory Automation Workstation Lab

ITEM-36658

Beckman Coulter Biomek FXP Laboratory Automation Workstation

This was removed from a university lab where it was surplus to requirements.

The system has been tested and is in good working order. The tiploader was tested with a compressor (not included).

The software is installed on the PC and communicates with the system well.

Included are;

PC/Accessories:-

Dell Optiplex 380

Iiyama Prolite B2282HS

Dell PC & Mouse

Starview 4 Port USB 2.0 KVM Switch

Lots of cables (USB, Ethernet, RS232)

Other Parts:-

Beckman Coulter FX Device Controller Model - 717635

Inheco TEC Control 96

SN - 958

Powers on

Cole Parmer MasterFlex Console Drive

Model - 7520-67

SN - G07004011

Powers on

Spare Beckman Coulter AccuFrame

SPRIplate 96 - Ring (AGN - 000322)

Removable Gripper Rod (REF-394069)

4 x Spare plates

2 x Nalgene 2Gal Bottles

Box of spare plate stands

Consumables included:-

1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 100

1 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks

2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack

1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs

3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)

3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 15

4 x Packs - Unknown Packs - Qty 20

1 x Box - Beckman SPAN 8 Tube Tool Kit

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek FX Robotic Automated Liquid Handling System Lab

ITEM-34971

Beckman Coulter Biomek FX Robotic Automated Liquid Handling System

This was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in good working order. The tiploader has been tested with a jun-air compressor which is not included in the sale.

The system includes a Dell Optiplex 380 running Windows XP. It has various software installed including Beckman Coulter Biomek 3.3 (Build 14)

This allows control of the Biomek FX robot. The other PC contains no Biomek software. The SATA HDD contains an old version of the Biomek software running on Windows NT.

Also Included with it are;

Stone PC - No software

Boxed Hard Drive

NEC 19" Monitor

Microsoft Keyboard

HP Mouse

Beckman Coulter Integrated Solutions CD

£ 3,000.00 (ex. VAT) 1 in stock

BIGNEAT Large Lab Robotics Filtered Air Enclosure Class 2 Special Lapp 220 Wide

ITEM-34622

This was removed from a university lab where it was surplus to requirements.

The cabinet was purchased in 2011 but we are told it was never used. The run hours of 53 reflect this.

It is in excellent cosmetic condition and in full working order.

Inner compartment 200 x 110 x 115cm

£ 3,000.00 (ex. VAT) 1 in stock

Bright Refrigerated Cryostat Microtome OTF/AS Lab

ITEM-31880

Bright Refrigerated Cryostat Microtome OTF/AS

This was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 3,000.00 (ex. VAT) 1 in stock

Perkin Elmer Janus Liquid Handler Workstation AJM8001/T Varispan 8 System Lab

ITEM-31576

Perkin Elmer Janus G3 Workstation

This system was removed from a university lab where it was surplus to requirements.

The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed.

The robot was initialized and successfully passed an XY random 100 move test with no errors.

System consists of:

Perkin Elmer Janus AJM8001/T Liquid Handler
Equipped with Varispan 8 Tip Arm

Perkin Elmer Peri Pump

Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner
Running Windows 7
Perkin Elmer WinPrep 4.9 software installed (software CDs included)

Riello UPS

Janus Printed User Manual

Accessories included:

16 x Spare Tips
16 x Spare Tecan 20734804 Cavro Syringes
5 x Waste Bottles
Various other small parts, spares, and consumables

£ 3,000.00 (ex. VAT) 1 in stock

Ruskinn Concept Plus Anaerobic Workstation Lab

ITEM-30435

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup.

There are no gloves included.

It is in good cosmetic condition with minor marks.

Internal dimensions- D57.5 W105 H47cm

Shelf - 104 x 25cm

Right chamber - D29 W33 H30cm

£ 3,000.00 (ex. VAT) 1 in stock

IWT Techniplast ATA Laboratory Washer AT 116

ITEM-30227

IWT Techniplast ATA Laboratory Washer AT 116

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 3,000.00 (ex. VAT) 1 in stock

Kedee Vacuum Tissue Processor KD-TS6B Lab

ITEM-20666

This Kedee Vacuum Tissue Processor KD-TS6B was removed from a university where it was surplus to requirement.

Model: KD-TS6B

Serial#: B97032

Date: 2015-01

The item is in reasonable cosmetic condition and it powers on and is in good working order. Both motors are functional.

Touch screen responsive.

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima LE-80K Ultracentrifuge with Rotor Lab

ITEM-36506

This Beckman Coulter Optima LE-80K Ultracentrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Included with it are;

1x Beckman Coulter 6 bucket SW 28 Rotor

Max RPM: 28000

6x Beckman Coulter SW 28 swinging buckets/50 ml tube adapter

1x Beckman Coulter rotor bag

4x Boxes of Beckman Coulter Pollyallomer Centrifuge Tubes 14 x 89 mm

2x Boxes of Beckman Coulter Ultra-Clear Centrifuge Tubes 25 x 89 mm

1x Beckman Coulter Spincote Lubricant

1x Beckman Coulter Silicone Vacuum Grease

1x Beckman Coulter Release tool

1x Beckman Coulter Rotor Safety Manual

1x Beckman Coulter Rotors and Tubes instruction CD

£ 3,000.00 (ex. VAT) 1 in stock

Leica RM2125RT Microtome Lab

ITEM-41623

Leica RM2125RT Microtome Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with all mechanical elements in good working order, we are unable to test it further at our facility.

The unit has no sample holder.

£ 3,000.00 (ex. VAT) 1 in stock

Jouan Refrigerated Trap RCT90 And Concentrator Evaporator RC 10.22. Lab

ITEM-45056

Jouan Refrigerated Trap And Concentrator Evaporator Lab

This system was removed from a university lab, where it was surplus to requirements.

All units are in good cosmetic condition and powered on. It's in good working order.

The system comprises the following:

KNF Neuberger Pump
Jouan RCT90 Cold Trap
Jouan Type RC 10.22 Vacuum Concentrator Centrifuge

£ 3,000.00 (ex. VAT) 1 in stock

ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator Lab

ITEM-31295

ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order.

It is in good cosmetic condition with minor marks.

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC, Software Lab

ITEM-42194

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software

This item was removed from a university lab where it was surplus to requirements.

The system powered on with stable status lights.

The previous client stated it was in working order when last used on: 24.05.24.

The system comprises:

Beckman Coulter FX Device Controller
Cat No.: 719366
3 x Inheco Single TEC Control
Part Nos.: 8900031
Serial Nos.: 2549, 2564, 2537
Inheco Thermoshake Plate Shaker & Cooler/Heater
Part No.: 7100146-B
Serial No.: 3080
Year: 2018
Thermo Scientific Masterflex P/S Easy-Load ll Pump
Model: 1400-1320
Serial No.: B13001697
Pump heads model: 956-0025
Lenovo ThinkCentre M83 with Windows 7 PRO
Model: S11DOO
Serial No.: MJ03JHRD
Lenovo ThinkVision Monitor
Serial No.: V6-D1101
Year: 2010
Lenovo Keyboard and Mouse

Software and Manuals Included:

Beckman Coulter install disks
Masterflex P/S 1400 series operating manual
Biomek Tutorials and setup guides

Also Included:

Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc.

Specifications:

Model: FXp Workstation
Serial No.: A318440537

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek FX 2 Arm Liquid Handler, Software Cytomat Hotel Lab

ITEM-21220

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in full working order and was used until very recently.

Included in the system are;

The system units are in good cosmetic condition.

The system consists of the following units:

Biomek FX robotic liquid handler

Serial No. 5012580

24 plate position bed

Fitted with light curtain, two robotic heads, tip changer, Variomag Teleshake

Biomek FX Device Controller

Serial No. 4000A51063

Thermo Electron Microplate Hotel

Serial No. 40578218

With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers

Cole Parmer Masterflex Console Drive with twin head bi-directional

Model 7520-c7

Cole Parmer Masterflex L/S Economy Drive with twin head

ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1

Serial No. 1S1OAGS11D00MJ0345JQ

View Sonic 17" Monitor

Model VS14768

Serial No. TT1152621348

Lenovo keyboard

Model KU-0225

Serial No. SN8134833

Lenovo mouse

Serial No. 44HM285

ALP 74cm conveyer with Microscan MS-710 barcode scanner

Serial No. FIS-0710-0010

Variomag Teleshake plate shaker with power supply

Beckman Coulter Accuframe positioner

Passed a PAT test on 11.06.24

Included:

2 x Biomek FX start-up training manuals

2 x hoses for Masterflex pumps

8 x data cables

8 x Plexiglass screen panels

10 x 719301-AA Fixed Tip Kit

8 x Ferrite cable noise screening block

5 x work bed fittings

4 x airline connectors

2 x 10 litre plastic Nalgene solvent bottles

£ 3,000.00 (ex. VAT) No longer available

Beckman Optima LE-80K Ultracentrifuge w/ Beckman SW 41 Ti Rotor Lab

ITEM-41838

Optima LE-80K Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

It has been temperature-tested and tested to the rotors maximum of 40,000rpm.

Also included are the following:

Beckman SW 41 Ti Rotor w/ 6 x Swinging buckets.

£ 2,995.00 (ex. VAT) 1 in stock

Sartorius Certomat BS-1 Incubator Shaker 8865124 Lab

ITEM-35713

Sartorius Certomat BS-1 Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected.

The shaker is in good working order.

The system is in good cosmetic condition with minor marks..

This is the heating only model. It will not refrigerate.

£ 2,970.00 (ex. VAT) 1 in stock

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab

ITEM-36368

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab

This was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and is made up of the following units;

1x FluidX X-Seal AAS Automated Adhesive Sealer

S/N: 1407

This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended.

Bambi VT75 Compressor

S/N: VT75-01229

52x42x61 cm

28.08 Kg

This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi.

1x SMC compressor regulator (with connecting tubes)

P/N: AW10-M5

2x Compressor connecting tubes

4x Rubber grommets

1x Roll of Clear Adhesive Seal

P/N: 43-1031

2x Spare Rollers

1x Connection Valve

1x RS232 cable

£ 2,965.00 (ex. VAT) 1 in stock

Neslab Cryocool CC-100 II Immersion Cooler Lab

ITEM-35994

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 2,955.00 (ex. VAT) 1 in stock

Statebourne Biostor 24 Cryogenic Liquid Nitrogen Storage Dewar Lab

ITEM-23970

This Statebourne Biostor 24 Cryogenic Liquid Nitrogen Storage Dewar was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in reasonably good cosmetic condition with some marks from use.

Specs;

Volume 380L

Internal diameter 788mm

External diameter 900mm

Internal height 835mm

External height 1193mm

£ 2,950.00 (ex. VAT) 1 in stock

Perkin Elmer Janus Automated Workstation w/ Purair Advanced Ductless Fume Hood

ITEM-32010

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood

This system was removed from a university laboratory where it was surplus to requirements.

It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below:

The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place.

There is no Software included with this system.

The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning.

Specifications:

Workstation Part No.: AJL8G01
Workstation Serial No.: DG11118582
Manufacture Date: November 2011
Last Service: 06-12-2022

Fume Hood:

Model: Purair P30
Serial No.: P90786
Internal Dimensions: L173 W109 H116 cm
Last Service: 09/08/2022

Accessories:

Box of Plate Holders.
Various Cables.
2 x Waste Bottles.
Waste Bin

The system is in reasonable used cosmetic condition.

£ 2,950.00 (ex. VAT) 1 in stock

Sigma 3-16KL Refrigerated Benchtop Centrifuge Lab

ITEM-45154

Sigma 3-16KL Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear but can be easily replaced and does not affect the unit's operation.

Functionality:

Powers up and runs as intended.
Tested at -10ºC and 37ºC, with temperatures reached as expected.

Included Accessories:

Rotor - Sigma 11180 4700rpm Rotor with Sigma 13190 Buckets

Bucket Adapters:
4 x Sigma 17355
4 x Sigma 17356
8 x Sigma 17358
4 x Sigma 17359
4 x Sigma 17362
4 x Sigma 17377
3 x Sigma 17190 lids for the buckets

Also Included:

Instruction manual

£ 2,915.00 (ex. VAT) 1 in stock

Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox

ITEM-35399

Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order but has not been tested under a vacuum.

It is in good cosmetic condition with minor marks from use.

It is supplied with;

miniMACS Vacuum pump. Serial No. 2633819.

miniMACS Footswitch assembly. Part No. A03107.

Whitley DG250 Anaerobic Workstation User Manual.

don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.

don whitley scientific 500/1000 Anotox Sachet. Part No. A02129.

don whitley scientific Natural Superflex Tubing. Part No. A00454.

£ 2,900.00 (ex. VAT) 1 in stock

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing

ITEM-37990

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing Lab

Serial No. TBA0618004

Software Version 1.3.17-06f731

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order. (Thermometer not included.)

Thaw loading temperatures -196˚C to 0˚C

Thaw temperatures 34˚C to 0˚C

The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

£ 2,850.00 (ex. VAT) 1 in stock

FluidX X-Seal Automated Thermal Sealer with Bambi VT75 Compressor

ITEM-36371

FluidX X-Seal Automated Thermal Sealer with Bambi VT75 Compressor

This was removed from a university lab where it was surplus to requirements.

The system all powers up and is in very good cosmetic condition with only minor marks.

The system is operational. - The sealing count is 1402

Included with it are;

Bambi VT75 Compressor

S/N: VT75-00437

52x42x61 cm

28.08 Kg

1x SMC compressor regulator (with connecting tubes)

P/N: AW10-M5

1x Roll of FluidX Adhesive PCR Foil

P/N: 40-1009

1x Roll of FluidX Chrystal Clear Seal

P/N: 43-1008

1x Roll of KBiosciences Peel Seal

P/N: KBS-0601-001

3x Roll of KBiosciences Clear Weld Seal Mark II

P/N: KBS-0607-002

£ 2,850.00 (ex. VAT) 1 in stock

Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 Lab

ITEM-30453

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale.

2 Shelves - 47 x 47cm

£ 2,815.00 (ex. VAT) 1 in stock

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

ITEM-35931

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

Max RPM-1800

Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes.

Centrifuge model number- VR maxi-1

Centrifuge serial number- 804040235

Freeze dryer model number- CT/DW 110

Freeze dryer serial number- 804050097

Maxi dry model number- MAXI-DRY PLUS

Maxi dry serial number- 804060037

RECERTIFIED ITEM

£ 2,800.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 2 C-LIN Automated CO2 Incubator Lab

ITEM-38063

Thermo Scientific Cytomat 2C-LIN Automated CO2 Incubator

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request.

It is in good cosmetic condition, with minor marks from use.

Also Included:

2 x plate racks with 21 shallow plate spaces each.

Length of CO2 hose

1 x instruction manual

1 x software documentation manual

1 x 2 C-LIN configuration CD

2 x keys for door lock

2 x keys for the power switch

£ 2,800.00 (ex. VAT) 1 in stock

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Thawing Lab

ITEM-37989

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing Lab

Serial No. TBA0620110

Software Version 1.5.1-ed925b

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order. (Thermometer not included.)

Thaw loading temperatures -196˚C to 0˚C

Thaw temperatures 34˚C to 0˚C

Last calibrated 19.01.23

The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

RECERTIFIED ITEM

£ 2,800.00 (ex. VAT) 1 in stock

Thermo Cytomat 2 C-LIN Automated Incubator Lab

ITEM-36590

Thermo Cytomat 2 C-LIN Automated Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit has been professionally serviced and is in full working order.

The full-service report is available on request.

This item also includes the following:

14 x Cytomat P35 Microplate Racks.

1 x Microscan MS-3-Laser BAR Code Scanner

Type FIS-0003-0007G.

£ 2,800.00 (ex. VAT) 1 in stock

FisherBrand GT 1R Centrifuge w/ TX-150 Swinging Bucket Rotor Lab

ITEM-41567

FisherBrand GT 1R Centrifuge w/ TX-150 Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order, it has been tested to its MAX (4350RPM)

This item also includes the following:

Thermo Scientific TX-150 Swinging Bucket Rotor

Max speed: 5000RPM

weight class: G

Serial#: 75005701

£ 2,790.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U74V Ultra Low Temperature Freezer

ITEM-39048

Sanyo MDF-U74V Ultra Low Temperature Freezer

This was removed from a university lab where it was surplus to requirements.

It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C.

It is in good cosmetic condition with minor marks from use.

£ 2,775.00 (ex. VAT) 1 in stock

Sanyo MDF-794 Ultra Low Temperature Chest Freezer Lab

ITEM-32029

Sanyo MDF-794 Ultra Low Temperature Chest Freezer

This was removed from a university lab where it was surplus to requirements.

It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - L184 W50 D76cm

£ 2,750.00 (ex. VAT) 1 in stock

Wheaton 753680-2 Reach In Incubator Lab

ITEM-39204

Wheaton 753680-2 Reach In Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer used for testing not included).

It is in reasonably good cosmetic condition with marks from use.

£ 2,750.00 (ex. VAT) 1 in stock

PHCBI Cooled Incubator Model MIR-154-PE Lab

ITEM-41807

PHCBI Cooled Incubator MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

£ 2,750.00 (ex. VAT) 1 in stock

PHCBI Cooled Incubator Model Type MIR-154-PE Labs

ITEM-41808

PHCBI Cooled Incubator Model Type MIR-154 Labs

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

This item requires a passcode to operate, which is available on request.

£ 2,750.00 (ex. VAT) 1 in stock

PHCBI Cooled Incubator MIR-154-PE Lab

ITEM-41809

PHCBI Cooled Incubator Type - MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

This item requires a Passcode to operate which is available on request.

General Laboratory

Filters