All Products

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 Vintage Microtome Knives With Sharpening strops and Whetstones

ITEM-42018

Job Lot of 13 Vintage Microtome Knives With Sharpening Strops and Whetstones

These items were removed from a university lab, where they were surplus to requirement.

The knife blades are all in very good condition, with sharp and undamaged cutting edges, appearing to have been well maintained, except for the hand knife, which has a poor cutting edge.

The wooden boxes are in excellent condition, except for two that are damaged.

The lot comprises:

3 x Shandon Nothung C wedge shape 20cm blades (circa 1967) in box
1 x Shandon Northung A concave 25cm blade (circa 1967) in box
1 x Unidentified C wedge 18cm blade in box
3 x MSE Ltd No. 9057.W wedge 9cm blades in box
2 x Cambridge Instruments rocking microtome knives (10cm blades) in box
1 x Unidentified wedge 8cm blade in leather case
1 x Hand knife with handle in poor condition in box
4 x Leather sharpening strops (30-35cm long), 2 in box
2 x 15cm whetstones
1 x Acrylic 15cm sharpener
1 x 25cm blade holder
3 x 20cm blade holders
1 x 17cm blade holder

£ 500.00 (ex. VAT) 1 in stock

Paar DMA 35 Density Meter Kit Lab

ITEM-41972

Paar DMA 35 Density Meter Kit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was tested with a 9-volt 6LR61 test battery, this is not included in the sale.

The kit consists of:

1 x Density meter

1 x Sanitex Eternal-Matic 2ml filling syringe

1 x Calibration screwdriver

1 x Wrist strap

1 x Original Hard plastic carry case

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ HP 7673 Injector Lab

ITEM-41843

Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ Hewlett Packard 7673 GC/SFC Injector Lab

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition and powers on. However, when the temperature was tested to its maximum of 325°C, it shut down at 203°C with the error message

"EPPA: SAFETY SHUTDOWN,"

Therefore, it is listed as Spares/Repair.

Furthermore, the included 7673 GC/SFC Injector could not be tested due to the absence of the controller.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Instruments Labofuge 400R Function Line Lab Spares/Repairs

ITEM-41702

Heraeus Instruments Labofuge 400R Function Line Lab

This item was removed from a university where it was surplus to requirement.

It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested.

Therefore, it is listed as Spares/Repair.

Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

£ 500.00 (ex. VAT) 1 in stock

Laboratory Isolation Table - White Lab

ITEM-41681

Isolation Table - White Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

NESLAB Coolflow CFT-33 Refrigerated Recirculator Lab Sapres/Repairs

ITEM-41633

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Flexar PDA Detector - Spares/Repair Lab

ITEM-41445

Perkin Elmer Flexar PDA Detector Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, it remains inoperative due to suspected internal damage to the motherboard.

Therefore, it is listed as Spares/Repair

£ 500.00 (ex. VAT) 1 in stock

Sutter Lambda LS Illuminator LB-LS/17 Lab

ITEM-41429

Sutter Lambda LS Illuminator LB-LS/17

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but the power switch is stuck in the on position.

We are unable to test it further at our facility.

Lamp Runtime: 05573.7 hours

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer 785A UV-VIS Detector Lab

ITEM-41330

Perkin Elmer 785A UV-VIS Detector Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Waters 2525 Binary Gradient Module Lab Spares/Repairs

ITEM-41181

Waters 2525 Binary Gradient Module Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but does not power on. Therefore, we are unable to test it, and it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

12 x Perkin Elmer Lumina Lamp & 2 x Baird Hollow Cathode Lamp, K-Na, Ba, Sn etc

ITEM-41172

12 x Perkin Elmer Lumina Lamp & 2 x Baird Hollow Cathode Lamp, K-Na, Ba, Sn etc

These were removed from a university where they were surplus to requirement.

The items have not been tested and may vary in condition. It is anticipated that some items may not be functional, whereas others may be in near new or unused.

Listed items are as follows:

12 x Perkin Elmer Lumina Lamp

P/N: N305-0115 Cd (Box empty)

P/N: N305-0214 Co-Cr-Cu-Mn-Ni

P/N: N305-0157 Pb (Sealed box, presumed new)

P/N: N305-0211 Al-Cu-Fe-Ti

P/N: N305-0142 Li

P/N: N305-0109 Ba

P/N: N305-0108 B

P/N: N305-0186 V

P/N: N305-0204 K-Na

2x P/N: N305-0175 Sn

P/N: N305-0155 P

P/N: N305-0176 Sr

2 x Baird Hollow Cathode Lamp

Type: Ca-Mg

Type: Na-K

£ 500.00 (ex. VAT) 1 in stock

Vacuum Generators LTD (UHV) Valve & Turbo Molecular Chamber Lab

ITEM-41171

Vacuum Generators LTD (UHV) Valve & Turbo Molecular Chamber Lab

These items were removed from a university where they were surplus to requirement.

Both items are in good cosmetic condition, we cannot test them at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Milestone Ethos plus 2 SEL Microwave Solvent Extraction Labstation Spares/Repair

ITEM-41135

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller.

The system is sold for spares/repairs.

-1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller

1x easywave chip card for the controller

S/N- 0205722

-2x Rotor' for microwave

- Relevant vessels and safety shields for rotors

-2x ATC-FO sensors for microwave

-2x Torque wrenches for rotor

-2x Extraction Pipes

1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620

Includes: Pipette tracker v3.3 Software

£ 500.00 (ex. VAT) 1 in stock

Leitz Wetzlar Dialux 20 Microscope w/ 3 x Objectives Phaco, Plan, NPL Lab

ITEM-40988

Leitz Wetzlar Dialux 20 Microscope

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, with all mechanical elements in working order.

Includes the following.

1x Leitz Lamp Power Supply

Objectives:

1x Leitz Wetzlar P 10/0.25 170/-

1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2

1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C-GR Spares/Repair Lab

ITEM-40010

Thermo Scientific Cytomat 24 C-GR Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, however, the unit has a Com port error when connected to Cytomat software.

The internal screen within the door (used for the stacker system) does not power on, and there appear to be faults affecting the stacker system overall.

As such, this item is listed as spares or repair.

Please note: Software not included.

£ 500.00 (ex. VAT) 1 in stock

2 x Multi-Tier Rack Laboratory Trolleys

ITEM-39960

Multi-Tier Rack Trolley x 2

This item was removed from a university lab where it was surplus to requirements.

Feature 3 graduated shelves.

Both trolleys are in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Aeromatic Fielder MP-Micro Fluid Bed Dryer Spares/Repair Lab

ITEM-39838

Aeromatic Fielder MP-Micro Fluid Bed Dryer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on.

Therefore, we are unable to test it further at our facility, and it's listed as Spares/Repair.

The item also contains various Assembling Dryer/ Top Sprayer Containers and cables, as seen at the end of the slide.

Specifications;

Model: MP-MICRO
Serial#: 04012
Date: FEB 04

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

ITEM-39828

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

These items were removed from a university where they were surplus to requirement.

All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.

Therefore, this listing is sold as Spares/Repair.

All items included are as follows:

Model1#: CR21 Controller

Serial1#: 10521389

Model2#: CR21 Transformer Box

Serial2#: 10521391

Model3#: CR21 Cryochamber

Serial3#: 10521390

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nikon Diaphot 300 Microscope *Condenser Removed* Lab Spares/Repairs

ITEM-39790

Nikon Diaphot 300 Microscope *Condenser Removed*

This microscope was removed from a university lab where it was surplus to requirements.

All mechanical elements are in good working order. The unit does not include the power supply or condenser therefore we are unable to perform any other tests. It is in good cosmetic condition with minor marks.

As stated in the title the condenser is not included.

It is made up of the following modules;

Nikon ND2 Filter

Nikon ND4 Filter

Nikon CFWN 10x/20 Eyepiece x 2

Nikon 100w Mercury Lamphouse LH-M100C-1

Nikon Halogen 12V 100W Microscope Lamp

£ 500.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell AMA240N Floorstanding Autoclave Lab Spares/Repairs

ITEM-39207

Astell ASA240 Floorstanding Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid.

This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair.

As displayed, it is in poor cosmetic condition internally.

Specifications;

Model- AMA240N
S/N- CLN51381

£ 500.00 (ex. VAT) 1 in stock

Leybold S16B/WS Trivac Rotary Vane Vacuum Pump

ITEM-39189

Leybold S16B/WS Trivac Rotary Vane Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and draws suction but has not been tested further.

It is in reasonably good cosmetic condition, with some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leitz Dialux 22 Fluorescence Microscope With Camera + Control Unit Lab Faulty

ITEM-39087

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit

This system was removed from a university lab where it was surplus to requirements.

The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp.

Due to the faults listed above, this system is listed as Spares/Repair.

The system comprises the following:

Leitz Vario Orthomat Controller
Leitz Power Supply for Lamp
Leitz Vario Orthomat 2 Camera
Leitz Wetzlar 100W Lamp (Type: 307-143.003)

5 x Objectives:

NPL Fluotar 6.3/0.20
NPL Fluotar 16/0.45
NPL Fluotar 40/0.70
Leitz EF 63/0.85
Leitz PL 2.5/0.08

2 x Leitz Eyepieces Periplan GW 10x M

Model: Dialux 22

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Luxonic LED Lighting Strips

ITEM-38992

Job Lot of Luxonic LED Lighting Strips.

These were removed from a university lab where they were surplus to requirements.

The items are all in good condition and have not been tested.

6 x Boxes:-

Ref numbers on boxes:-

S25416/1

SLS66/2R/1400/50.1W/DIM8

ZL900389

Box 1 - 4 x 35W SL370090 143cm Long

Box 2 - 2 x 50W ZL900389 140cm Long

Box 3 - 3 x x 35W SL370090 143cm Long

Box 4 - 3 x x 35W SL370090 143cm Long

Box 5 - 3 x x 35W SL370090 143cm Long

Box 6 - 3 x x 35W SL370090 143cm Long

2 x Boxes Labelled LED Plugs

PN - LF500043

FX-SC08-G2-CT2PF-0500 14XFS20

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope Lab Faulty

ITEM-38264

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope

This system was removed from a university lab where it was surplus to requirements.

The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs.

Cosmetic and working conditions vary as stated below each item.

ADE Phase Shift MicroXAM-100

Model: MicroXAM-100

The item is in excellent cosmetic condition and shows no signs of damage.

However, when switched on, the item does not power on.

The item includes the following components:

- Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.

- 50AT NA 0.55 885 Objective: This objective is untested.

- Phase Shift Technology Rotary Stage 4360:

Model: Rotary Stage 4360

Serial#: L56332-3021

The rotary stage is in good cosmetic condition and shows no signs of damage.

However, when switched on, it does not power on.

- Javelin Video Monitor:

Model: BWM9BX

Serial#: 7070083

The video monitor is in good cosmetic condition.

It powers on with the power light illuminated.

- Nikon Transformer and Nikon 50W AD Lamp:

Model: UN

Both the transformer and the Nikon lamp are in good condition and fully functional.

The light output can be adjusted fully.

- AD Phase Shift Controller:

Serial#: E71000-500

The phase shift controller is in good cosmetic condition.

It powers on with the power light illuminated.

Unfortunately, further testing could not be conducted.

£ 500.00 (ex. VAT) 1 in stock

Campden Model 773 Micropipette Puller Lab

ITEM-37802

This Campden Model 773 Micropipette Puller was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

We are unable to test this item further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37792

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university lab where it was surplus to requirements.

The burner is in good cosmetic condition. However, the burner control screen has come apart from the control panel and is possibly broken. No testing has been carried out.

Due to the inability of testing and damaged control screen, this item is listed as Spares/Repair.

Specifications:

Model: LPN3/2051
Serial No.: 01333
Manufactured: 11.09.15
Output: 2051 KW/hr (7.0 MBtu/hr)

Includes:

Dungs Gas Train Valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter
Autoflame Combustion Management System:
Part Nos.: MM10005, MM10004
Serial Nos.: 20368, 051771
TEC Fan Motor:
5.5KW 415 volt
Type: 5.523TECAB35-IE3
T3A 13251-2
Gas Inlet Pipe: 2.5"

£ 500.00 (ex. VAT) 1 in stock

Biometra TGGE System with Controller and TGradient Lab

ITEM-37756

This Biometra TGGE System with Controller and TGradient was removed from a university lab where it was surplus to requirements.

All units are in reasonably good cosmetic condition and powered up, unable to test further at our facility.

System includes:

Biometra TGGE System

Serial Number: 1506138

Biometra TGGE System Controller

Serial Number: 1203176

Biometra TGradient

Serial Number: 1910339

£ 500.00 (ex. VAT) 1 in stock

INTEK LH200 Fraction Collector Lab

ITEM-37686

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

INTEK Model LH200 Fraction Collector Lab

ITEM-37685

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Rigaku Integrated Actor Controller Automated Crystal Transfer System

ITEM-37644

Rigaku Integrated Actor Controller Automated Crystal Transfer System

This system was removed from a university where it was surplus to requirement.

Both elements power up and are in excellent cosmetic condition, we are unable to test them further at our facility.

All items included:

Rigaku Controller

Serial No. 4016

Rigaku - Leister End Effector Dryer

Serial No. 1054

Accessories/Cables:

2 x serial ribbon leads

Power lead

Robot connection lead

Data lead

Dewar connection lead

Leister End Effector Heater instruction manual

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Z Corporation ZPrinter 450 3D Printer Spares/Repair Lab

ITEM-37485

Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

Build speed: between 2 to 4 layers per minute

Build volume:

X-axis: 8 inches (203 mm)
Y-axis: 10 inches (254 mm)
Z-axis: 8 inches (203 mm)
Build capacity: 640 cubic inches
Layer thickness:
Minimum: 0.0035 inches (0.089 mm)
Maximum: 0.004 inches (0.102 mm)
Color shell thickness: 0.025 inches
Resolution: 300 x 450 dpi
Materials:
Powder: zp130
Binder: zb59
Print heads:
HP11 (clear binder)
HP57 (single tricolor CMY)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Molecular Dynamics Typhoon Trio Internal Components Spare Parts From 2 Machines

ITEM-37478

Molecular Dynamics Typhoon Trio Internal Components – Spare Parts from 2 Machines

These items were removed from university laboratories where they were surplus to requirements.

This listing includes internal components from two Molecular Dynamics Typhoon Trio Imagers. The systems are not complete: one internal is missing the main circuit boards, while the other is missing the laser source.

Additional components may also be missing. Cables have been cut.

Includes:

Melles Griot Laser Class 3B
Model: 85-BCB-020-049
Serial No.: 1447K
Year: 2008

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu Model LC20 AD HPLC Lab Spares/Repairs

ITEM-37386

Shimadzu LC20 AD HPLC

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu LC20 AD HPLC PUMP Lab Spares/Repairs

ITEM-37377

Shimadzu LC20 AD HPLC

This item was removed from a university where it was surplus to requirement.

It is in poor cosmetic condition and powers on, we are unable to test it further at our facility.

It is sold for spares/repairs due to the poor condition, we presume it is not working properly.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Typhoon Trio+ Variable Mode Imager Spares/Repair Lab

ITEM-37335

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

ITEM-37273

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

This item was removed from a university laboratory where it was surplus to requirements.

The Savant SPD1010 SpeedVac powers on but encounters issues during operation. The lid fails to lock when a program is initiated, and although the rotor slightly moves, it does not fully run.

The AC-1 Phase motor operates correctly when tested independently but does not power on when connected to the SpeedVac.

Due to these issues, this unit is listed for spares or repair.

Model: SPD1010

£ 500.00 (ex. VAT) 1 in stock

Panasonic Model No. AW-HE60 CCTV Camera

ITEM-37269

Panasonic AW-HE50 CCTV Cameras

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The previous client has stated it was in full working order prior to removal.

This item was tested with an in-house power supply cable. (not included.)

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Projector Lens Hitachi Kodak Sanyo Elmo Isco-Gottingen Lab

ITEM-37209

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

4 x Sanyo LNS - S20
2 x Hitachi LL-503
1 x Hitachi LL- 504
1 x Isco-Gottingen F =250mm
1 x Kodak Carousel S-AV2000 F = 150mm
1 x Kodak Retinar F = 60mm
1 x Schneider-Kreuznach Carousel Procolar F = 100mm
3 x Kodak Slide Projection FF Lens F = 100-200mm
1 x Kodak Retinar F = 250mm
1 x Elmo zoom lens F = 180-300mm
1 x Isco-Gottingen Vario-Projar 70-120mm
1 x Kodak Retinar F = 150mm
2 x Kodak Retinar F = 180mm
2 x Kodak Long Focal Length Lens
Assortment of glass lens and bulbs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Spares/Repair

ITEM-37195

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, however, during testing, the unit powered on but emitted buzzing sounds followed by hissing and smoke.

Therefore, it is listed as Spares/Repair

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Compact LidPark P00155 Lab

ITEM-37180

Thermo Scientific Compact LidPark P00155

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers up, we are unable to test it further at our facility.

Model: LidPark P00155

£ 500.00 (ex. VAT) 1 in stock

HasKris Recirculating Chiller S/n HA007835 Lab Spares/Repairs

ITEM-37147

This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further at our facility.

It is in good cosmetic condition, with some marks from use.

Some of the components have been removed, it is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

Kryo Planer Biomed 10 Series System Lab Spares/Repairs

ITEM-37143

Kryo Planer Biomed 10 Series System

This system was removed from a university where it was surplus to requirement.

The system failed PAT on insulation. It is sold for spares/repairs.

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 series Controller Key

All units listed above power on and are in good cosmetic condition, neither have been tested further at our facility.

1x LNP4 Planer freezer Pump:

Model LNP4 13181

This item is in reasonably good cosmetic condition, but due to it requiring a separate power supply, we are unable to test it at our facility.

£ 500.00 (ex. VAT) 1 in stock

21 x Fisherbrand 5000ml Conical Flasks FB33137 Lab

ITEM-36620

21 x Fisherbrand 5000ml Conical Flasks FB33137

These were removed from a university lab where they were surplus to requirements.

The units are used but are in good condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Christie Mirage Model S+4K Commercial Projector Spares/Repairs

ITEM-36557

Christie Mirage Model S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up but is displaying with a green tinge. We were unable to get this to change.

The lamp has run for 780 hours.

It is sold for spares/repairs.

All Products

Filters