General Laboratory
Items 101 to 120 of 1118
£ 2,545.00 (ex. VAT) 1 in stock
Sanyo Type MCO-20AIC CO2 Laboratory Incubator Double-Stack lab
ITEM-30525
This was removed from a university lab where it was surplus to requirements.
Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.
The incubators are in good cosmetic condition with only minor marks from use.
Top:-
Model - MCO-20AIC
SN - 01212218
External Dimensions - D72 W77 H102cm
Internal Dimensions - D51 W61 H66cm
4 Shelves - 45 x 58cm
Bottom:-
Model - MCO-20AIC
SN - 01212221
External Dimensions - D72 W77 H102cm
Internal Dimensions - D51 W61 H66cm
4 Shelves - 45 x 58cm
£ 2,525.00 (ex. VAT) 1 in stock
Leica Reichert Ultracut S Microtome & Controller Lab
ITEM-31917
This Leica Reichert Ultracut S Microtome & Controller was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. The lights work, and the microtome itself is mechanically sound.
Leica Reichert Ultracut S
Type - 702501
SN - 420699
StereoZoom 6
Zoom Range 0.67X - 4.0X
2 x Eye Pieces 15X W.F. Stereo (31-05-62)
Controller
Type - 654901
SN - 89465
£ 2,510.00 (ex. VAT) 1 in stock
Neslab CFT-75 Recirculating Chiller Lab
ITEM-36248
This Neslab CFT-75 Recirculating Chiller was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with marks from use.
Neslab CFT-75 Recirculating Chiller
Model: CFT-75 Recirculating Chiller
Serial#: 100068103
£ POA 1 in stock
Thermo Scientific Haake A28 Chiller with Haake SC100 Control
ITEM-34892
This item is new in stock. Please enquire for further details.
£ 2,500.00 (ex. VAT) 1 in stock
Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet Lab
ITEM-39859
Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in good cosmetic condition with minor marks from use.
Model: NC2-4L8
Serial#: NC2-4L8-2013-80689
£ 2,500.00 (ex. VAT) 1 in stock
Binder KBF 240 Climate Chamber Lab
ITEM-36880
Binder KBF 240 Climate Chamber
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been temp tested. It is in good working order (Thermometer not included).
It is in good cosmetic condition with minor marks.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,500.00 (ex. VAT) 1 in stock
New Brunswick Galaxy 48R CO2 Incubator Lab
ITEM-35611
This New Brunswick Galaxy 48R CO2 Incubator was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. There is a report available on request.
It is in very good cosmetic condition with minor marks.
£ 2,500.00 (ex. VAT) 1 in stock
Thermo Scientific Megafuge 8 Benchtop Centrifuge with TX-150 Rotor Lab
ITEM-39014
Thermo Scientific Megafuge 8 Benchtop Centrifuge Lab
This was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition.
It powers up and is in good working order.
Runs smoothly up to 4500rpm.
Also included:
1 x Thermo Scientific M10 Microplate Swinging Bucket Rotor
1 x Thermo Scientific TX-150 Swinging Bucket Rotor
4 x Buckets and Lids for Thermo Scientific™ TX-150 Swinging Bucket Rotor
4 x Thermo Scientific Adapters for TX-150 Swinging Bucket Rotors
£ 2,485.00 (ex. VAT) 1 in stock
Perkin Elmer Intracooler N5374099 DSC Cooling System Lab
ITEM-36792
This Perkin Elmer Intracooler N5374099 DSC Cooling System was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with marks from use.
£ 2,470.00 (ex. VAT) 1 in stock
Lauda Eco Gold with Lauda Eco RE 620 Water Bath Lab
ITEM-38872
Lauda Eco Gold with Lauda Eco RE 620 Water Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. (Thermometer not included).
It is in excellent cosmetic condition with minor marks.
£ 2,470.00 (ex. VAT) 1 in stock
Piramoon PTI Fiberlite F8S-6x1000Y 8000rpm Centrifuge Rotor Lab
ITEM-36650
This Piramoon PTI Fiberlite F8S-6x1000Y 8000rpm Centrifuge Rotor was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition but has some scuff marks around the thread.
It has not been tested at our facility.
£ 2,470.00 (ex. VAT) 1 in stock
Newport Corporation Pneumatic Vibration Isolation Optics Table KL-A 244x122x91
ITEM-38697
Newport Corporation Pneumatic Vibration Isolation Optics Table KL-A 244x122x91
This was removed from a university lab where it was surplus to requirements.
The unit has not been tested but is in good cosmetic condition with minor marks.
The table has imperial 1inch spacing.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,440.00 (ex. VAT) 1 in stock
Peak Scientific Nitrogen Gas Generator Model: NG250A Lab
ITEM-24125
This Peak Scientific Nitrogen Gas Generator Model: NG250A was removed from a university lab where it was surplus to requirements.
The unit powers up and has passed a professionally performed health check with a couple of advisories. It did not require a service reset. The full report is available on request.
It is in good cosmetic condition with marks from use.
It comes with a user manual and disk.
£ 2,425.00 (ex. VAT) 1 in stock
Don Whitley Scientific miniMACS Anaerobic Workstation Glovebox Safety Cabinet
ITEM-30207
This Don Whitley Scientific miniMACS Anaerobic Workstation was removed from a university lab where it was surplus to requirements.
The unit has been looked at by a qualified service engineer.
The pump works from the main socket but not from the instrument socket. They cleaned the filter which was previously making the pump run loudly. They repaired the fans which were previously broken.
They have tested the cabinet with a vacuum pump and it seems it is holding the vacuum. Although one piece of plexiglass holding the right door lock is broken. The system holds a vacuum despite this.
The temperature was tested up to 37˚c, it took about an hour to reach this.
It is in reasonably good cosmetic condition but has some minor marks from use and the aforementioned crack.
£ 2,390.00 (ex. VAT) 1 in stock
Scanlaf Mars 1500 Class 2 Biohazard Safety Cabinet with Stand Lab
ITEM-36706
Scanlaf Mars 1500 Class 2 Biohazard Safety Cabinet with Stand
This is in good working order and in good cosmetic condition with marks from use.
Stand dimensions - L161 W78 H78cm
Fan hours - 18990
£ 2,390.00 (ex. VAT) 1 in stock
Scanlaf Mars 1500 Biohazard Safety Cabinet Class 2 Lab
ITEM-31323
This Scanlaf Mars 1500 Biohazard Safety Cabinet Class 2 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. The backlight on the display has failed, but it is still readable.
It is in good cosmetic condition with minor marks from use.
Cabinet Dimensions - L160 W80 H128cm
Internal workspace dimensions - D58 W150 H70cm
Frame dimensions - L160 W78 H75cm
£ 2,370.00 (ex. VAT) 1 in stock
Miele Professional G7883 Laboratory Glassware Washer Lab
ITEM-35870
Miele Professional G7883 Laboratory Glassware Washer
This was removed from a university lab where it was surplus to requirements.
It has been pressure tested at our site, and the lab confirmed it was fully working prior to removal.
It powers up and is in reasonably good cosmetic condition with marks from use.
£ 2,365.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31841 Lab
ITEM-20384
This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
The unit appears to pretty much fully work. We have homed the axis and run a basic set of commands with it. We have a video of this working.
The Tiploader appears to be faulty as it is not accepting commands from the PC. We have verified that the cable/air and PC are communicating with the Tiploader, by connecting a known working unit to the PC. The known working unit operated fine which proved the included Tiploader to be faulty.
The system comprises of;
1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation
Cat no. A31841
Unit dimensions - W77 L92 H82cm
1 x IBM ThinkCentre PC
MT-M 8143-34U
Biomek Software Version 3.3 installed.
1 x IBM ThinkVision Monitor
Type - 9417-AB1
1 x Jun-Air Compressor
Model 6
The item powers on with the compressor running.
Cosmetically it is in a good used condition.
1 x Apple Pro Keyboard
1 x Lenovo Mouse
Box of Accessories:-
Beckman Coulter AccuFrame
2 Power Adaptors
Various cables and parts
9 x 96 Well 0.5ml tube plates
£ 2,355.00 (ex. VAT) 1 in stock
Covaris S2 Focused Ultrasonicator with Grant LTC1 Water Bath Lab
ITEM-30312
Covaris S2 Focused Ultrasonicator with Grant LTC1 Water Bath
This was removed from a university lab where it was surplus to requirements.
Included are;
1 x Covaris S2 Focused Ultrasonicator
Model S2
Ser No. 541
The unit powers on and is in good cosmetic condition. The motor can be heard almost immediately after powering on the unit. We were unable to test it further.
1x Grant LTC1
Model R2
The unit powers on and is in good cosmetic condition.
It has been tested with a digital thermometer (not included) and is in good working order.
£ 2,350.00 (ex. VAT) 1 in stock
CBS Isothermal V1500-AB Series Liquid Nitrogen Tank with 2301 Series Ctrl Lab
ITEM-30290
This CBS Isothermal V1500-AB Series Liquid Nitrogen Tank was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition with only minor marks form use. We were unable to test it any further at our facility.
Internal dimensions 53 x 53 x 88.5cm
Controller
CBS 2301 Series
Items 101 to 120 of 1118