General Laboratory

£ 7,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek Fxp System + Software & Cytomat 148520 A31842 Lab

ITEM-23421

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university lab where it was surplus to requirements.

All units are in good used cosmetic condition but they do have various signs of general use.

The system consists of:

1 x Beckman Coulter Biomek Fxp CAT No A31842.

The unit powers up and both lights illuminate Green. It was not tested any further.

The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included.

1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.

It comes with:

2 x Stacker 10 hotels.

2 x FX Stacker 10 hotels.

1 x Stacker Carousel Pendant.

The mounting plate to connect it to the Fxp is included.

It also comes with a spare Microscan, operational condition is unknown.

1 x Lenovo PC with monitor, mouse & keyboard.

It has the Biomek Version 3.3 software installed.

1 x Jun-Air 1795001 Compressor.

The system also includes quite a few plates and consumables and various connection cables.

£ 7,000.00 (ex. VAT) 1 in stock

Priorclave Tactrol 2 Advanced Autoclave B-QCS-SH200 Lab

ITEM-10030

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

£ 7,000.00 (ex. VAT) 1 in stock

Thermo Scientific Revco ULT-7150-9V Chest freezer, -150°C Lab

ITEM-45615

Thermo Scientific Revco ULT-7150-9V Chest freezer, -150°C Lab

This item is being sold on behalf of an operational laboratory.

It is in good cosmetic condition and working order. The item received recent servicing by a Thermo Scientific engineer.

Included is an Invisible Systems 105C/125C PT100 remote cryogenic probe.

It is available for collection from Dublin, Ireland, but we may be able to offer shipping for an additional fee.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 6,990.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 8000 Shaker Incubator Model:444 SHKE8000-1CE Lab

ITEM-34596

This Thermo Scientific MaxQ 8000 Shaker Incubator Model:444 was removed from a university lab where it was surplus to requirements.

It has been tested to shake & heat and is in full working order. This is not the refrigerated model.

It is in good cosmetic condition with minor marks from use.

It is fitted with 8 holders for 1000ml Flasks.

The item is supplied with Operating & Maintenance Manual, 4 x Stacking Blocks & 8 x 1000ml Flasks.

Internal Dimensions: L 85cm x W 46cm x H 30cm.

£ 6,750.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Legend XFR Centrifuge With 4700rpm Rotor ab

ITEM-38127

Thermo Scientific Sorvall Legend XFR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition both internally and externally.

The item powers on and works as intended, it has been temperature-tested. (Thermometer not included)

Also includes the following:

Thermo Scientific 75003607 TX-750 Rotor & 75003608 750mL Round Buckets (set of 4)

Max Speed: 4700 rpm

Max RCF:4816 x g

£ 6,510.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NX S8 Laboratory Automation Workstation

ITEM-36739

Beckman Coulter Biomek NX S8 Laboratory Automation Workstation

This was removed from a university lab where it was surplus to requirements.

The system powers up, communicates with the PC and is in good working order.

It is in good cosmetic condition with minor marks from use.

Included are;

Model - Biomek NX S8

SN - 9898860170

Beckman Coulter Biomek Valve unit

Cat no. 719657

SN - 5080667

PC Accessories include:

Lenovo ThinkCentre PC - Has Biomek software version 4.1

AMW 17" LCD Monitor

Lenovo keyboard & mouse

Box of accessories/consumables includes:-

Cables

Beckman Coulter Tube Rack (Boxed)

Beckman Coulter Image MORBM33A Recovery DVD

Acronis True Image 2016 #1 Backup Solution DVD

Beckman Coulter Biomek Seal & Sample Aluminum Foil Lids

Beckman Coulter SPAN-8 P250 COND.N/S Tips (1 Rack)

2 x Beckman Coulter Modular Reservoir Quarter Module 19ml (Cat-372788)

Beckman Coulter Modular Reservoir Full Module 150ml (Cat-372784)

Beckman Reservoir holder (Cat-372795)

Beckman Capstrip (267002)

3 x Packs Blue 13mm Inserts (5 Per Pack)

3 x Packs Red 12mm Inserts (5 Per Pack)

3 x Packs Black 10mm Inserts (5 Per Pack)

1 x Pack White 11mm Inserts (5 In Pack)

Bag of mixed Tecan syringes

Back of 4 gauges

Lead Screw with nut (Ref-989458)

Elektroden EL8/4V (B-3204021)

£ POA 1 in stock

Asymptote VIA Freeze with Cytiva VIA Extractor Nitrogen Free Freezer Lab

ITEM-37992

This item is new in stock. Please enquire for further details.

£ 6,500.00 (ex. VAT) 1 in stock

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave Lab

ITEM-34883

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further at our facility.

It is sin good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 6,135.00 (ex. VAT) 1 in stock

Astell Scientific Top Loading Autoclave AACO52 Lab

ITEM-23259

This Astell Scientific Top Loading Autoclave AACO52 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request.

It is in good cosmetic condition with minor marks from use.

£ 6,100.00 (ex. VAT) 1 in stock

Priorclave Model PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35119

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 6,010.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45129

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 2295
M24 Controller

£ 6,000.00 (ex. VAT) 1 in stock

Constant Cell Disruption Systems Model T2 40 AA AA French Press System Lab

ITEM-42001

Constant Cell Disruption Systems Model T2 40 AA AA Homogeniser French Press Lab

This system was removed from a university where it was surplus to requirement.

The previous client stated this system was in full working order, prior to removal.

When powered up, the system successfully passed all self-checks.

All elements are in good cosmetic condition.

Model Code T2 40 AA AA

Serial No. 525

Firmware v6.10

Boot v4.15

Additional parts Included:

1 x user manual

4 x allen keys

2 x jet removal tools

1 x pair of Richmond needle-nosed pliers

1 x tube of Dow Corning high vacuum grease, half-used

1 x step cranked 14mm spanner

1 x 127mm steel flange

1 x large internal 6cm valve

2 x 60ml syringes

1 x 5ml syringe

1 x plastic T-fork

2 x O-rings Part No. KE904

1 x O-rings Part No. KE1608

3 x O-rings Part No. BOF00076

1 x O-rings Part No. BOF00176

1 x O-rings Part No. BOF00314

7 x O-rings Part No. BOF00073

2 x target anvils Part No. KE2399

5 x seal assembly Part No. DRG02701

2 x hard cases for spares and tools

£ 6,000.00 (ex. VAT) 1 in stock

Rodwell Sapphire 660 Autoclave Lab

ITEM-45127

Rodwell Sapphire 660 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit shows some cosmetic damage, including a dent in the roof and side panel.

The previous client has stated that this autoclave was in working order prior to removal.

The autoclave requires a 63amp plug to be fitted in order to power it up.

Specifications:

Model: Sapphire
Serial No.: 2157

£ 6,000.00 (ex. VAT) 1 in stock

Thermo Scientific Forma - 8600 Series 820CV Ultra-Low Temperature Chest Freezer

ITEM-37247

Thermo Scientific Forma - 8600 Series 820CV Ultra-Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition internally and externally.

RECERTIFIED ITEM

£ 6,000.00 (ex. VAT) 1 in stock

Astell AMA260T Top-Loading Autoclave Lab

ITEM-20661

Astell AMA260T Top-Loading Autoclave

This was removed from a university lab where it was surplus to requirement.

The unit has been professionally serviced and is in full working order. A full report is available on request.

It is in good cosmetic condition with minor marks.

£ 6,000.00 (ex. VAT) 1 in stock

Binder CB-S 170 CO2 Incubator Double Stack Lab

ITEM-39009

Binder CB-S 170 CO2 Incubator Double Stack Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 6,000.00 (ex. VAT) 1 in stock

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab

ITEM-39002

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, white light, UV, and window up/down function properly.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 78 x 180cm

Unit height with stand: 226cm

Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand.

Socket tester not included.

£ 6,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips

ITEM-38068

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips

This was removed from a university lab where it was surplus to requirements.

The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand ne

It is in good cosmetic condition with minor marks from use.

The system includes:

Biomek NXP Workstation

Serial No. A318410608

Beckman Coulter FX Device Controller

Cat No. 719366

Serial No. 00717635AM0718110002

Beckman Coulter Accuframe

Serial No. 00717820AG0711110001

ThinkCentre PC with Windows 7

Serial No. 1S5852BL2MJWLDN9

Software:

Biomek System Install Disk v3.3

Beckman Coulter Sami Workstation Software v4.0

Beckman Coulter Recovery DVD MORBK29A

Biomek Tutorials v3.3

Accounts and Permissions v3.1

Additional parts/Accessories:

2 x Manuals Biomek NX and NXP v3.3 Tutorial

1 x Active Curtain test rod

Beckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes

1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm

1 x complete front polycarbonate safety screen kit with all parts and fixings

10 x data leads

120 x 96 well plates, chimney well TC with lids

5 x workstation table fittings

9 x microplate holders

1 x pipette exchanger holder

12 x ferrite cable noise reducers

£ 6,000.00 (ex. VAT) 1 in stock

Priorclave PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35118

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 6,000.00 (ex. VAT) 1 in stock

Bespoke Purpose Built Laboratory Autoclave Room Lab

ITEM-38271

Bespoke Purpose Built Laboratory Autoclave Room

This is being sold on behalf of a client. It is surplus to requirements.

The unit is in good working order, but will need to be dismantled on site by a potential buyer. The class 1 cabinet is included in the sale.

The system is located in Alnwick, Northumberland.

Any potential buyer will need to be able to dismantle the system for removal.

It is going to need a lot of building work to be demolished, supported and reinstated for the removal. Also the water mains etc. The unit is mounted to the floor but has extensive pipework that goes approximately 4-5 feet below ground.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 6,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 4000 Liquid Handler Laboratory Automation Workstation Lab

ITEM-26794

This Beckman Coulter Biomek 4000 Liquid Handler Laboratory Automation Workstation is being sold on behalf of a university. It is surplus to requirements.

The system is in full working order. It was purchased by the university in 2014 as part of a special package for £45k+VAT. We have the original PO documentation details all parts etc.

The system is still at the universities site, but we are able to arrange delivery including international delivery. If you require anything from the instrument such as sample runs etc please let us know.

Viewings will be possible on request.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 6,000.00 (ex. VAT) 1 in stock

Oxford Cryofree System

ITEM-30345

Oxford Cryofree System

This was removed from a university lab where it was surplus to requirements.

The unit has not been fully tested.

The system includes;

1x Oxford Intelligent Gas Handling System with Femto Power Thermometry unit:

Part No. CSB1001

The unit powers on.

1x Oxford Instruments Cyrofree Cylinder

Project No. 418726

The unit is in good cosmetic condition.

There are some light tape marks and some colour bleaching from general use.

1x Trivac Pump:

Type D65B

3 Phase 16A Plug

1x/10-4

The unit powers on and is in good cosmetic condition.

6 x Cylindrical Vessels:

Volume and Dims of Vessels:

•4.5L (H62cm x W13.5cmx L13.5cm)

•5.25L (H59cm x W12.5cm x L12.5cm)

•2.25L (H33.5cm x W9.25cm x L9.25cm)

•2L (H34cm x W9cm x L9cm)

•11.5L (H75cmx W22cm x L22cm)

• 4.5L (H72cmx W13.5cm x L13.5cm)

1x Metal flex Hose:

2x Metal 3x valve sealed Cylinders:

£ 6,000.00 (ex. VAT) 1 in stock

Peak Scientific Genius 3020 Nitrogen Generator Lab

ITEM-39913

Peak Scientific Genius 3020 Nitrogen Generator Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 6,000.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45128

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 1861
M24 Controller

£ 5,995.00 (ex. VAT) 1 in stock

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand

ITEM-38897

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. This model is not fitted with a UV light.

It is in good cosmetic condition with minor marks from use.

£ 5,550.00 (ex. VAT) 1 in stock

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab

ITEM-39001

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, UV, white light, and window up/down function properly.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 78 x 150cm

Includes:

-Manual

-Stand for unit

£ 5,500.00 (ex. VAT) 1 in stock

Thermo Fisher Class 2 Safe 2020 1.5 Biological Safety Cabinet Lab

ITEM-39000

Thermo Fisher Class 2 Safe 2020 1.5 Biological Safety Cabinet

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, white light, UV, and window up/down function properly.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 64 x 120cm

Includes:

-Manual

-Stand for unit

RECERTIFIED ITEM

£ 5,500.00 (ex. VAT) 1 in stock

Priorclave Tactrol 2 PS/QCS/EH150 Laboratory Autoclave Lab

ITEM-25467

This Priorclave Tactrol 2 Autoclave Type - PS/QCS/EH150 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with marks from use.

£ 5,430.00 (ex. VAT) No longer available

Thermo Scientific Heraeus Multifuge X3R Centrifuge with 4700RPM Rotor

ITEM-35878

Thermo Scientific Heraeus Multifuge X3R Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It has a cycle count of 417.

It is in excellent cosmetic condition.

Rotor - Thermo Scientific 75003607 - Max 4700 RPM

Buckets - 4 x Thermo Scientific 75003607

Adaptors:

2 x Green Sorvall Heraeus 75003638- fits 5 x 50ml tubes

2 x Brown Sorvall Heraeus 5003639- fits 12 x 15ml tubes 5003639

Includes Instruction manual

The centrifuge was set to -10ºc successfully. It was then set to 4ºc successfully and finally set to 37ºc

Cycle count - 417

Serial number- 41006326

Model number- X3R

£ 5,385.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Multifuge X3R Centrifuge & 4700RPM Rotor & Buckets Lab

ITEM-35880

Thermo Scientific Heraeus Multifuge X3R Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It has a cycle count of 336.

It is in excellent cosmetic condition.

Included with it are;

Rotor - Thermo Scientific 75003607 - Max 4700 RPM

Buckets - 4 x Thermo Scientific 75003608

Adaptors:

2 x Green Sorvall Heraeus 75003638- fits 5 x 50ml tubes

4 x Thermo Scientific Bucket Lids

RECERTIFIED ITEM

£ 5,315.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Refrigerated Incubator Shaker SHKA5000-8CE Lab

ITEM-21099

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation.

It is in good cosmetic condition with marks from use.

Internal Dimensions: L 86cm x W 56cm x H 47cm.

Shaking area Dimensions: L 76cm x W 46cm.

RECERTIFIED ITEM

£ 5,270.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Refrigerated Shaking Incubator Lab

ITEM-30255

Thermo Scientific MaxQ 5000 Refrigerated Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation.

It is in good cosmetic condition with marks from use.

Internal dimensions - L86 W56 H47cm

Shaker Platform - 76 x 46cm

£ 5,245.00 (ex. VAT) 1 in stock

Thermo Scientific Safe 2020 Class 2 Safety Cabinet S2020 1.8 Lab

ITEM-36707

Thermo Scientific Safe 2020 Class 2 Safety Cabinet S2020 1.8

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is not fitted with a UV lamp.

It is in good cosmetic condition with marks from use.

Frame dimensions - L191 W71 H89cm

£ 5,220.00 (ex. VAT) 1 in stock

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2 Lab

ITEM-29785

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2

This was removed from a university lab where it was surplus to requirements.

At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed.

It is in excellent cosmetic condition with hardly any marks from use.

There are various accessories included.

£ 5,200.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Refrigerated Incubator Shaker SHKE5000-8CE Lab

ITEM-25607

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It was tested with a digital thermometer (not included).

It is in good cosmetic condition with minor marks.

£ 5,015.00 (ex. VAT) 1 in stock

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.5 + Stand

ITEM-38898

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.5 + Stand

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It does not have the UV option.

It is in good cosmetic condition with marks from use.

it is supplied with a dismantled stand.

£ 5,000.00 (ex. VAT) 1 in stock

2 x Newport RS4000 & Bridge in H-Configuration Optical Table Assembly 4.5 x 6M

ITEM-45638

Newport RS4000 H-Configuration Optical Table Assembly

This item is being sold on behalf of a client. It is surplus to requirements.

This large optical table system consists of an assembly of 3 Newport RS4000 Metric tables configured in the form of an "H."

It consists of 2 x 6 Meter Tables & 1 x Bridge Section 2 Meter Table - full dimensions listed below.

Table Dimensions:

Long Tables (2):
Length: 6 metres
Width: 1.5 metres
Thickness: 30 cm
Bridge Section:
Length: 2 metres
Width: 1.5 metres
Total Assembled Dimensions (As shown in diagram):
Length: 6 meters
Width: 4.5 meters

Please note that this sale is for the Optic Tables only, the supporting legs are not included.

Collection available from Surrey, United Kingdom, but we may be able to arrange shipping for an additional cost.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 5,000.00 (ex. VAT) 1 in stock

Parker 4278 NitroFlowLab Nitrogen Gas Generator Lab

ITEM-37633

Parker NitroFlowLab 4278 Nitrogen Gas Generator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Running Hours: 26,042

Power supply cable included.

Product details:

Model 4278 Cryo

Serial No. 4278-18NFLC00010

Manufactured 29.05.18

0-8 barg operating pressure

10˚C to 35˚C operating temperature

£ 5,000.00 (ex. VAT) 1 in stock

Foster + Freeman MVC3000 Fingerprint Fuming Cabinet

ITEM-44965

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

1 Shelf: 74 x 58 cm
2 Baskets: 57 x 30 x 15 cm
Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

£ 5,000.00 (ex. VAT) 1 in stock

Peak Scientific Nitrogen Gas Generator N300DR Lab

ITEM-41417

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

RECERTIFIED ITEM

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C Lab

ITEM-40009

Thermo Scientific Cytomat 24 C Lab

This item was removed from a university where it was surplus to requirement.

The unit has been professionally serviced and is in full working order.

The service report is available on request.

This item also includes the following:

1 x Operating instructions

1 x Software Documentation

£ 5,000.00 (ex. VAT) 1 in stock

Oxford Instruments OptistatDN Nitrogen Bath Cryostats Lab

ITEM-39964

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Fisher Class 2 Safe 2020 1.2 Biological Safety Cabinet Lab

ITEM-39004

Thermo Fisher Safe 2020 1.2 Class 2 Biological Safety Cabinet

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, white light, UV and window up/down function properly. It was last serviced in April 2024.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 64 x 120cm

Includes:

-Manual

-Stand for unit

Socket tester not included.

£ 5,000.00 (ex. VAT) 1 in stock

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator Lab

ITEM-35037

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer used for testing not included).

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE Lab

ITEM-31545

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been extensively tested. It is in full working order.

It is in good cosmetic condition with minor marks.

This is the non-refrigerated model of this incubator.

£ 5,000.00 (ex. VAT) 1 in stock

Life Sciences QD12844R1 Laboratory Cleanroom Lab

ITEM-31691

Life Sciences QD12844R1 Laboratory Cleanroom

This item was removed from a university where it was surplus to requirement.

An engineer serviced the system in 2021 and installed new filters. Since it has not been used since then, new filters may be required if dust has accumulated. It was fully operational before going out of use.

It is in excellent cosmetic condition and has hardly been used.

We have the Engineer's Validation report for it from 2021 available on request if you would like to see it.

£ 5,000.00 (ex. VAT) No longer available

Lancer 1300 LX Laboratory Glass and Dish Washer Lab

ITEM-42222

Lancer 1300XL Laboratory Glass and Dish Washer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specifications:

Model: 1300XL
Serial Number: 9CO73834
Internal wash compartment 52 x 52 x 163cm (l x w x h)

£ 5,000.00 (ex. VAT) No longer available

Julabo FP50 GB Circulating Water Bath Lab

ITEM-44660

Julabo FP50 Circulating Water Bath Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in excellent cosmetic condition and appears to have had little use.

RECERTIFIED ITEM

£ 4,790.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab

ITEM-34732

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.

The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it.

The system consists of:

1 x Beckman Coulter Biomek NXp Robot.

s/n A318410173.

Cat No A31841.

96 Well head.

1 x Beckman Coulter Tiploader.

1 x Beckman Coulter AccuFrame.

1 x Microscan MS-3 Laser (Barcode Reader)

1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.

This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

£ 4,620.00 (ex. VAT) 1 in stock

Thermo Scientific MSC 1.8 Class 2 Laboratory Safety Cabinet Lab

ITEM-35941

Thermo Scientific MSC 1.8 Class 2 Laboratory Safety Cabinet

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

General Laboratory

Filters