All Products

£ 750.00 (ex. VAT) 1 in stock

GE SuperFrac Fraction Collector Lab

ITEM-49996

GE SuperFrac Fraction Collector Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; There is no PC or Software include.

£ 750.00 (ex. VAT) 1 in stock

RS Components Stainless Steel Vacuum Bellows UHV Ultra-High Vacuum

ITEM-50220

Stainless Steel Vacuum Bellows - RS Components

This item was removed from a facility where it was surplus to requiremet.

It is in good cosmetic condition and remains untested.

£ 750.00 (ex. VAT) 1 in stock

Woodway PPS 70 med-1 Treadmill Ergometer

ITEM-50500

Woodway PPS 70 Med Treadmill Ergometer

This item was removed from a university facility where it was surplus to requirements.

The treadmill powers on and is in good overall cosmetic condition with minimal wear.

The previous owner reported that the treadmill is fully working but will very occasionally switch itself off and require a restart. This happens infrequently, sometimes with months between occurrences.

We found no issues in testing.

The treadmill has been serviced annually, with the most recent service carried out in June 2025.

Includes:

Treadmill unit

Integrated control panel

Specifications:

Model: PPS 70 Med-I

Serial Number: 12101 0208

Min Speed: 0 km/h

Max Speed: 20 km/h

Min Incline: 0%

Max Incline: 20%Woodway PPS Med 70 Treadmill Ergometer

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock

Nuaire DH Autoflow NU-5500E CO2 Air-Jacketed Incubator Lab

ITEM-49731

Nuaire DH Autoflow CO2 Air-Jacketed Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

It was last serviced in December 2024.

£ 750.00 (ex. VAT) 1 in stock

Olympus U-LH100HG Microscope Lamp

ITEM-41428

Olympus U-LH100HG Microscope Lamp

This item was removed from a university lab where it was surplus to requirement.

The unit is in good cosmetic condition.

The lamp both power up fine. (tested with an in-house power supply)

We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

£ 750.00 (ex. VAT) 1 in stock

Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR Lab

ITEM-18169

This Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR was removed from a university lab where it was surplus to requirements.

Autoclave has now been fully tested by a technician and confirmed to be fully working.

The only recommendation is that the safety valve is replaced prior to use. A brand new one should be fitted on installation by the new user.

Internal dimensions:-

Depth - 41cm

Width - 30cm

Height - 30cm

Holes size on tray - 21mm

£ 750.00 (ex. VAT) 1 in stock

Leica DMIL Inverted Microscope Type 090-135.001

ITEM-41191

Leica DMIL Inverted Microscope Type 090-135.001

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with marks from use.

No objectives included.

The microscope features:

2 x Leica 10X/18 Eyepiece

£ 750.00 (ex. VAT) 1 in stock

Taylor Hobson Model K Pantograph Engraver 110.902.324

ITEM-48758

Taylor Hobson Model K Pantograph Engraver 110.902.324

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and appears to be in good working order.

There are various marks and signs of use.

£ 750.00 (ex. VAT) 1 in stock

Tiertime UP300 Tiertime Melted Extrusion Modelling 3D Printer

ITEM-47609

Tiertime UP300 Tiertime Melted Extrusion Modelling 3D Printer

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, the client stated it was in good working order prior to removal.

Specifications;

Firmware Version - 359
Total Time - 519.5h
Model - 3DP-25-5A
S/N - 550047
FCC ID - 2AAHW-UP300

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 8 in stock

Vaisala GMP231 Carbon Dioxide Probe Lab

ITEM-46495

Vaisala Carbon Dioxide Probe

This item was removed from a facility where it was surplus to requirements.

This unit is in very good cosmetic condition, it is unclear whether it has been used. Testing has not been possible, so it is sold as seen.

Includes:

Vaisala GMP231 CO₂ Probe

Model: GMP231

£ 750.00 (ex. VAT) 1 in stock

Jun-Air Compressor Model 12-40

ITEM-43051

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

Pressure: 12.2 bar
Minimum Operating Temperature: 10°C
Maximum Operating Temperature: 50°C

£ 750.00 (ex. VAT) 1 in stock

Perkin Elmer Arnel Autosystem XL GC Gas Chromatograph Lab

ITEM-37154

Perkin Elmer Arnel Autosystem XL GC

This system was removed from a university where it was surplus to requirement.

It powers up and is in good cosmetic condition, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Copley DIS 6000 Dissolution Tester Lab

ITEM-50196

Copley DIS 6000 Dissolution Tester

This item was removed from a facility where it was surplus to requirements.

The unit powers on, the display lights up, and all buttons respond correctly. Speed control was tested at 50 RPM and 200 RPM, with both settings running smoothly and maintaining consistent speed. All liquid vessels present hold water without leaks, and the drain tap functions correctly. The large water vessel has visible staining.

The temperature function could not be tested as the heater is not included. No further testing has been carried out.

Included Components:

7 stirred test vessel holders
5 × 1000 ml glass vessels
6 metal paddles (without attachments)
Bag of additional accessories

Model: DIS 6000

£ 750.00 (ex. VAT) 1 in stock

Sorvall SLA-3000 Superlite Centrifuge Rotor 12000RPM Lab

ITEM-55361

Sorvall SLA-3000 Superlite Centrifuge Rotor 12000RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition with no signs damage present.

Rotor Type Fixed-angle
Material Aluminum
Capacity 6 × 500 mL
Maximum Speed 12,000 rpm
Maximum RCF 24,336 × g
Minimum RCF 6,337 × g
Tube Dimensions 70 × 190 mm

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 10 x Brunel SP27 Compound Microscopes Lab

ITEM-48559

Job Lot of 10 x Brunel SP27 Compound Microscopes Lab

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

All microscopes are in good cosmetic condition.

Each microscope includes;

1 x Carry Case

4 x Objectives:

4/0.10 160/-
10/0.25 160/-
40/0.65 160/0.17
100/1.25oil 160/0.17

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 5 x Underbench Cupboards - 4 Doubles & 1 Single

ITEM-56399

Job Lot of 5 x Underbench Cupboards - 4 Doubles & 1 Single

These cupboards were removed from a facility after becoming surplus to requirements.

All units are in good cosmetic condition.

Cupboard Dimensions

Single

External dimensions:

Length: 50 cm
Width: 100 cm
Height: 85 cm

Internal dimensions:

Length: 46 cm
Width: 96 cm
Height: 70 cm

Double

External dimensions:

Length: 100 cm
Width: 100 cm
Height: 85 cm

Internal dimensions:

Length: 196 cm
Width: 96 cm
Height: 70 cm

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

7 x Nine Hole Nose Poke Feeder Arrays (Mixed Brands) Cenes Cognition Paul Fray

ITEM-47690

7 x Nine Hole Nose Poke Feeder Arrays (Mixed Brands) Lab

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

Included;

2 x Cenes Cognition Nine Hole Nose Poke Feeder Arrays

2 x Paul Fray (Gray) Nine Hole Nose Poke Feeder Arrays

3 x Paul Fray (Wooden) Nine Hole Nose Poke Feeder Arrays

1 x Nine Hole Nose Poke Feeder Array without case

£ 745.00 (ex. VAT) 1 in stock

Prior PX033 Compound Microscope W/ PaxCam EDU Lab

ITEM-49236

Prior PX033 Compound Microscope with PaxCam EDU

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It is in very good cosmetic condition.

The camera could not be tested as no PSU is included.

Includes:

Dust cover
Spare fuses
PaxCam EDU PX-CM-EDU (Serial No.: 6120011)
2 x WF 10x/22 Eyepieces
E Plan 4x/0.10 Objective
E Plan 10x/0.25 Objective
E Plan 40x/0.65 Objective
E Plan 100x/1.25 Oil Objective
USB cable for PaxCam
Operation instructions

£ 740.00 (ex. VAT) 1 in stock

Parker Balston 3848 NitroFlow Lab Nitrogen Gas Generator

ITEM-55682

Parker Balston 3848 NitroFlow Lab Nitrogen Gas Generator

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

£ 740.00 (ex. VAT) 1 in stock

Applied Biosystems 7900HT Fast Real-Time PCR System Lab

ITEM-52610

Applied Biosystems 7900HT Fast Real-Time PCR System Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 740.00 (ex. VAT) 1 in stock

Prior PX033 Compound Microscope W/ PaxCam EDU Lab

ITEM-49237

Prior PX033 Compound Microscope with PaxCam EDU

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in good working order.

It is in good cosmetic condition. The PaxCam EDU camera could not be tested as the power supply unit was not included.

Includes:

Dust cover
Spare fuses
PaxCam EDU PX-CM-EDU (Serial No. 6120014)
2 × WF 10x/22 Eyepieces
E Plan 4x/0.10 Objective
E Plan 10x/0.25 Objective
E Plan 40x/0.65 Objective
E Plan 100x/1.25 Oil Objective
USB cable for PaxCam

Comes dismantled in case.

£ 740.00 (ex. VAT) 1 in stock

GE Model SuperFrac Fraction Collector Lab

ITEM-49997

GE Model SuperFrac Fraction Collector Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; There is no PC or Software included.

£ 730.00 (ex. VAT) 1 in stock

GE Model - SuperFrac Fraction Collector Lab

ITEM-49998

GE Model SuperFrac Fraction Collector Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; There is no PC or Software included.

£ 730.00 (ex. VAT) 1 in stock

WESCOR HR-33T Dew Point Microvoltmeter Lab

ITEM-52411

WESCOR HR-33T Dew Point Microvoltmeter Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

£ 710.00 (ex. VAT) 1 in stock

Sartorius Arium Mini Model H20-MA-UV-T Water Purification System Lab

ITEM-48343

Sartorius Arium Mini Model H20-MA-UV-T Water Purification System Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab has confirmed it was in good working order prior to removal.

Please note; It requires new Cartridges and Filters as the current ones have expired.

£ 710.00 (ex. VAT) 1 in stock

Percival Scientific Model E-30LED.1 Plant Growth Chamber

ITEM-54789

Percival Scientific Model E-30LED.1 Plant Growth Chamber

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 710.00 (ex. VAT) 1 in stock

Adhere Hydraulic Mixer Model ECDQ2B32-100D Lab

ITEM-50447

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

£ 705.00 (ex. VAT) 1 in stock

Jun-Air 4000-40M Cabinet Compressor Lab

ITEM-47757

Jun-Air 4000-40M Cabinet Compressor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear.

The unit successfully powered on and produced airflow from the outlet valve at 2 Bar (25 PSI). Run hours recorded at 8424. Fitted with a 3-pin 16 Amp blue plug.

Includes:

Jun-Air motor Model 2000-US1 (Max 10 Bar, Motor ID L11798)

Model: 4000-40M

Serial No.: 644866

£ 700.00 (ex. VAT) 1 in stock

Melles Griot Optical Breadboard 150 x 60 x 6cm Imperial

ITEM-56099

Melles Griot Optical Breadboard 150 x 60 x 6cm Imperial

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

RECERTIFIED ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MCO-17AIC CO2 Incubator Lab

ITEM-53954

Sanyo MCO-17AIC CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: It is recommended that the system is calibrated before use.

RECERTIFIED ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MCO-17AIC CO2 Incubator Lab

ITEM-51624

Sanyo MCO-17AIC CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

RECERTIFIED ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MCO-19AIC Laboratory CO2 Incubator

ITEM-51289

Sanyo MCO-19AIC Laboratory CO2 Incubator

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and is in good working order.

Last Service: 12/2023

Dimensions;

External length (cm) 71
External width (cm) 62
External height (cm) 90

Internal length (cm) 49
Internal width (cm) 52
Internal height (cm) 26

£ 700.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator - MCO-17AI Lab

ITEM-48489

Sanyo CO2 Incubator - MCO-17AI Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in good working order.

It is in reasonably good cosmetic condition, with surface scratches present and a broken door handle.

£ 700.00 (ex. VAT) 1 in stock

Perkin Elmer LS 50B FL Luminescence Spectrometer Lab

ITEM-49835

Perkin Elmer LS 50B FL Luminescence Spectrometer Lab

This item was removed from a faciity where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

£ 700.00 (ex. VAT) 1 in stock

TecQuipment Model H1 Hydraulic Bench Lab

ITEM-50341

TecQuipment Model H1 Hydraulic Bench Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

VWR 26L Water/Bead Bath 26L CAT NO. 462-0559 with Beads Lab

ITEM-51177

VWR 26L Water/Bead Bath 26L CAT NO. 462-0559

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition and in good working order.

£ 700.00 (ex. VAT) 1 in stock

AGFA Curix 60 Tabletop X-Ray Film Processor Lab

ITEM-50278

AGFA Curix 60 Tabletop X-Ray Film Processor

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

BIOHIT Bio-Tek ELx50 BW50 Microplate Washer System Lab

ITEM-50322

BIOHIT Bio-Tek ELx50 BW50 Microplate Washer System – Lab

This item was removed from a university where it was surplus to requirements.

The system is in good cosmetic condition and initialises when powered on. The washer was successfully homed on all axes.

No further functional testing has been carried out.

£ 700.00 (ex. VAT) 1 in stock

Motic SMZ-168 Stereo Microscope w/ Spare Incident Illumination Light Lab

ITEM-48633

Motic SMZ-168 Stereo Microscope w/ Spare Incident Illumination Light Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 700.00 (ex. VAT) 1 in stock

Triple Red Geno 20 RO/DI Water System w/ Triple Red TANK30 Water Tank

ITEM-51158

Triple Red Geno 20 RO/DI Water System w/ Triple Red TANK30 Water Tank

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Includes tubing.

£ 700.00 (ex. VAT) 1 in stock

Hangzhou Alltest Fluorescence Immunoassay Analyser AFR-400

ITEM-51536

Hangzhou Alltest Fluorescence Immunoassay Analyser AFR-400

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Edwards Modulyo EF4 with 8-port Column Manifold and Cylindrical Acrylic Bell Jar

ITEM-51163

Edwards Modulyo EF4 with 8-Port Column Manifold and Cylindrical Acrylic Bell Jar

This item was removed from a facility where it was surplus to requirements.

The unit cools well and holds vacuum, however, the vacuum gauge is not working.

Due to this fault, the unit is being sold as spares or repairs.

Includes:

Edwards Modulyo EF4

8-port column manifold

Cylindrical acrylic bell jar

£ 700.00 (ex. VAT) 1 in stock

Holten LaminAir HV Mini PCR Workstation w/ Pipettes Lab

ITEM-56024

Holten LaminAir HV Mini PCR Workstation Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes:

Various Fisherbrand SureOne pipette tips (see photos)
Thermo Scientific Finnpipette stand
5 x Finpipettes (5, 6, 30, 500, 1000)

£ 700.00 (ex. VAT) 1 in stock

VWR PCR Workstation - 732-2541 UV Lab

ITEM-52931

VWR PCR Workstation - 732-2541 UV Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 700.00 (ex. VAT) 1 in stock

TecQuipment GH5.0 Centrifugal Pump Test Set

ITEM-54786

TecQuipment GH5.0 Centrifugal Pump Test Set

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 700.00 (ex. VAT) 1 in stock

TecQuipment GH5.0 Centrifugal Pump Test Set Lab

ITEM-54785

TecQuipment GH5.0 Centrifugal Pump Test Set Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 700.00 (ex. VAT) 1 in stock

Tecniplast Model 9ARMV8124 Ventilated Cabinet

ITEM-51788

Tecniplast Model 9ARMV8124 Ventilated Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Dimensions;

External length (cm) 63
External width (cm) 103
External height (cm) 190

Internal length (cm) 50
Internal width (cm) 90
Internal height (cm) 120