All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Don Whitely MK3 Anaerobic Bench Top Work Station Spares/Repair

ITEM-42468

Don Whitely MK3 Anaerobic Bench Top Work Station

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but is not in working order, mainly due to a faulty gas inlet valve.

It powers on with functional temperature control and cooling fans. Key issues include non-working internal power sockets, flashing low CO2 and N2 warning lights, and a broken outer door lock seal knob, which compromises the chamber's sealing.

Due to the faults listed above, this system is listed as Spares/Repair.

Features:

Uses hydrogen, nitrogen, and carbon dioxide or a standard anaerobic gas mixture.
Digital temperature controller for constant temperature maintenance.
Humidistat-controlled condensing plate for excess moisture removal.
30-litre interchange lock capable of holding 108 plates with vacuum flushing.

Includes:

User Instruction Manual

Serial No.: 3170S

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U442 Medical Freezer Lab Spares/Repairs

ITEM-44667

Sanyo MDF-U442 Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it is not functional as it stays at ambient room temperature and triggers the alarm when the desired temperature is set.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Erweka DT 600 Dissolution Tester (Missing Heater) Lab

ITEM-50027

Erweka DT 600 Dissolution Tester (Missing Heater)

This item was removed from a facility where it was surplus to requirements.

It powers on, the display screen is clear, and all buttons respond with audible feedback. Further functional testing could not be carried out as the paddles and heater are missing. No additional testing has been performed.

Included:

Platinum PT100 thermometer

Model: DT 600

£ 500.00 (ex. VAT) 1 in stock

Triple Red Duo Organic 60 Ultra Pure Water Purification System Lab

ITEM-45397

Triple Red Duo Organic 60 Ultra Pure Water Purification System

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Included Components:

Avidity Carbon Pre-Filter
P/N: TR-2057
Install Date: 26/7/23
Avidity Cartridge Pack
P/N: TR-2050
Install Date: 26/7/23
Avidity Cartridge Polisher
P/N: TR-2051
Install Date: 26/7/23

Specifications:

Model: Organic 60 Ultra Pure Water Purification System
Serial No.: 0916961-01

£ 500.00 (ex. VAT) 1 in stock

Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTABV 22S500 Lab

ITEM-24385

This Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTABV 22S500 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

Tank inside dimensions - 40 x 21 x 40cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hiden Analytical Mass Spectrometer MSIU/4 Ion RF Head HAL 511 S/2 S/R

ITEM-49024

Hiden Analytical Secondary Mass Spectrometer and Ion Counting RF Head

These items were removed from a university laboratory where they were surplus to requirements.

It has failed an insulation test during Class 1 PAT testing and therefore could not be powered on. For this reason, it is being listed as Spares/Repair.

In overall good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu SCL-10A, RF-551 Spectrofluorometric Detector, RF-551 S/R Lab

ITEM-47678

Shimadzu SCL-10A System with RF-551 Spectrofluorometric Detector and RF-551 Fluorescence HPLC Monitor

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in fair condition with some cosmetic wear. The accompanying PC initially worked and displayed Shimadzu Class VP software, but it now fails to boot, remaining unresponsive after shutdown.

Additionally, the previous owner stated that the system is faulty.

Therefore, it is listed as Spares/Repair.

Includes:

Shimadzu SCL-10A System Controller (Model: SCL-10A, Serial No.: 20290E)
Shimadzu RF-551 Spectrofluorometric Detector (Model: RF-551, Serial No.: 28E00028)
Shimadzu RF-551 Fluorescence HPLC Monitor (Model: RF-551, Serial No.: 070775)
Stream 56X Max PC with Windows 95 and Shimadzu Class VP Software (non-functional as described)
Acer AL511 Monitor
Viglen Keyboard
Microsoft Mouse

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LTE Series 300 Autoclave Spares/Repair Lab

ITEM-46080

Autoclave Series 300

This item was removed from a university laboratory where it was surplus to requirements.

The plug has been removed by the previous owner, therefore, we could not test it any further.

It is in poor cosmetic condition. it si ultimately listed as spares/repairs for this reason.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

ITEM-46517

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

ITEM-08317

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

This item was removed from a university where it was surplus to requirement.

This item is in poor cosmetic condition and is sold as Spares/Repair.

The lid of the item is not fixed, and the internal pump has been removed.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 Vintage Microtome Knives With Sharpening strops and Whetstones

ITEM-42018

Job Lot of 13 Vintage Microtome Knives With Sharpening Strops and Whetstones

These items were removed from a university lab, where they were surplus to requirement.

The knife blades are all in very good condition, with sharp and undamaged cutting edges, appearing to have been well maintained, except for the hand knife, which has a poor cutting edge.

The wooden boxes are in excellent condition, except for two that are damaged.

The lot comprises:

3 x Shandon Nothung C wedge shape 20cm blades (circa 1967) in box
1 x Shandon Northung A concave 25cm blade (circa 1967) in box
1 x Unidentified C wedge 18cm blade in box
3 x MSE Ltd No. 9057.W wedge 9cm blades in box
2 x Cambridge Instruments rocking microtome knives (10cm blades) in box
1 x Unidentified wedge 8cm blade in leather case
1 x Hand knife with handle in poor condition in box
4 x Leather sharpening strops (30-35cm long), 2 in box
2 x 15cm whetstones
1 x Acrylic 15cm sharpener
1 x 25cm blade holder
3 x 20cm blade holders
1 x 17cm blade holder

£ 500.00 (ex. VAT) 1 in stock

Jun-Air Model 3 Air Compressor

ITEM-50039

Jun-Air Model 3 Air Compressor Lab

This item was removed from a university laboratory where it was surplus to requirement.

The unit is in good cosmetic condition and powers on; however, we are unable to test it further at our facility.

Both pressure gauges function as they should.

A service is recommended prior to use.

£ 500.00 (ex. VAT) 1 in stock

High-Q femtoREGEN Class 4 Laser Model IC-1030-1000 Yb HR REG AMP SHG-THG Faulty

ITEM-30344

This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requirements.

The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past.

The fault is unknown but could be something to do with the pocket cell.

The system is comprised of;

1x High-Q femtoREGEN Laser:

Model IC-1030-1000 Yb HR REG AMP SHG-THG

Inside the unit:

1x User Replaceable Diode Module (URDM #2506)

The unit is in good cosmetic condition.

1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nm

The unit is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

ITEM-48418

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Platform: Floor Prep
Rotor Type: Swinging-Bucket (Ultracentrifugation)
Maximum RPM: 40,000 rpm
Max g-Force: 285,000.00
k-Factor: 137
Number of Tubes: 6×14 mL / 14×95 mm(6×14 mL / 1×4 in)

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

ITEM-48416

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Rotor Type Ultra – Swinging Bucket
Maximum Speed 41,000 rpm
Maximum RCF at r max (g) 288,000 x g
k-Factor 124
Rotor Material Titanium
Bucket Material Titanium, Anodized Aluminum Cap

£ 500.00 (ex. VAT) 1 in stock

G-STORM Thermal Cycler GS00482 Lab

ITEM-35590

This G-STORM Thermal Cycler GS00482 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in good cosmetic condition with minor marks.

It has a 2 block cylinder with 48 wells in each block

£ 500.00 (ex. VAT) 1 in stock

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab

ITEM-35645

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights

These were removed from a university lab where they were surplus to requirements.

Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks.

Includes:

10 x Ohaus 200g weights

10 x power supplies

4 x manuals

These scales also have the option to be operated with AA batteries

Max 300g

Model number- TA301

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu Model LC20 AD HPLC Lab Spares/Repairs

ITEM-37386

Shimadzu LC20 AD HPLC

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Leitz Wetzlar Dialux 20 Microscope w/ 3 x Objectives Phaco, Plan, NPL Lab

ITEM-40988

Leitz Wetzlar Dialux 20 Microscope

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, with all mechanical elements in working order.

Includes the following.

1x Leitz Lamp Power Supply

Objectives:

1x Leitz Wetzlar P 10/0.25 170/-

1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2

1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

£ 500.00 (ex. VAT) 1 in stock

Stuart SBS40 Shaking Water Bath Lab

ITEM-50253

Stuart SBS40 Shaking Water Bath Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Job lot of 14 x Black Lab Stools/Chairs

ITEM-49574

Job Lot of 14 x Black Lab Stools/Chairs – Used

This lot of items was removed from a university laboratory where they were surplus to requirements.

The lot includes 14 lab stools/chairs of various sizes and patterns.

1 x Round stool

4 x Stools with castors

The remaining stools are standard fixed-leg types.

All units are in good used condition, showing general signs of wear from normal use. No structural damage has been observed.

£ 500.00 (ex. VAT) 1 in stock

Scanbur Warming Cabinet Type-48-VS-III Lab

ITEM-44883

Scanbur Warming Cabinet Type-48-VS-III Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, other than tape holding on a damaged alarm light cover.

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter System Gold 126 Solvent Module, 127 Solvent Module, 116 Detector

ITEM-47512

Beckman Coulter System Gold 126 & 127 Solvent Modules with 166 Detector

This system was removed from a university laboratory where it was surplus to requirements.

All three units power on and are in good cosmetic condition with minimal wear. The system could not be tested further in our facility.

Includes:

Beckman Coulter System Gold 126 Solvent Module
Model: 126 Solvent Module
Serial No.: 513-2525
Beckman Coulter System Gold 127 Programmable Solvent Module (Version 1.3)
Model: 127 Programmable Solvent Module
Serial No.: 125-1053
Beckman Coulter System Gold 166 Detector
Model: 166 Detector
Serial No.: 423-2320

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

illumina MiSeq DNA Sequencer System Spares/Repair Lab

ITEM-49075

illumina MiSeq DNA Sequencer System Spares/Repair Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing the following error was noted; The FPGA reported an error while executing command "YHOME"; error message: "ERROR: Home sensor never tripped error.".

Therefore, we were unable to conduct further testing and it is listed as Spares/Repair.

Software installed;

MiSeq Control Software 4.1.0.656

MiSeq Test Software 4.0.0.19

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

TurboChef NG0EW Sota High Speed Commercial Oven Spares/Repair

ITEM-51087

TurboChef NG0EW Sota High Speed Oven

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cometic condition and powers on.

Please note; During testing, after approximately 5 minutes of being powered on, the oven cut out and tripped the electrical system. After being left for a few minutes and powered on again, it successfully completed both the warm-up (to 260 °C) and cool-down sequences.

Additionally, two of the legs are slightly bowed in (as shown in the photos), however they are still supporting the unit without issue.

Due to the issues stated above, this item is listed as Spares/Repair.

Current counters:

Cook time: 78 — 05:11:48
Cook counts: 68,035
Oven time: 15,610 — 7:03:25
Mag time: 16 — 09:21:08

£ 500.00 (ex. VAT) 1 in stock

Appligene Mini Four A Hybridation Oven Lab

ITEM-50455

Appligene Mini Four A Hybridation Oven Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Optima Max Ultracentrifuge - Spares/Repair Lab

ITEM-50456

Beckman Coulter Optima Max Ultracentrifuge with TLA 100.3 Rotor – Spares/Repair

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, but shows erratic RPM readings (10–2000 RPM) even though the rotor does not move. With the chamber closed, the system still displays fluctuating speeds and will not enter the speed/temperature test program. Power-cycling did not resolve the issue. A video of the fault is available.

Due to this operational problem, the unit is offered as Spares/Repair.

Ultracentrifuge:

Model: Max (130K)
Serial Number: CTM00B03

Included Rotor:

Beckman TLA 100.3
Max RPM: 100,000
Serial Number: 00U 3496

£ 500.00 (ex. VAT) 1 in stock

Leec K2N Compact Incubator Lab

ITEM-50735

Leec K2N Compact Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Please note; The door seal is not in the best condition.

£ 500.00 (ex. VAT) 1 in stock

Corbett CAS1200 Robotics Pipetting Liquid Handling System with Robotics4 Lab

ITEM-19976

This Corbett Robotics Liquid Handling System Model - CAS1200 was removed from a university lab where it was surplus to requirements.

The unit powers up fine and part of the robot moves when powered and switched off.

It is in good cosmetic condition with only minor marks from use.

It comes with

9 x Packs of 96 Tips (Lot no. 110210-281)

1 x Corbett Research Block - P/N 3001-008

The unit is supplied with a Dell laptop which has Corbett Robotics4 software installed on it. It is all in good working order.

£ 500.00 (ex. VAT) 1 in stock

Fujifilm FLA-5000 Fluorescent Image Analyzer Lab

ITEM-50612

Fujifilm FLA-5000 Fluorescent Image Analyzer Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The previous owner stated it was in complete working order when it was last used in October 2024.

Please note; There is no PC or Software included in this sale.

£ 500.00 (ex. VAT) 1 in stock

Ion Bench Laboratory Bench 135x120x60 LxWxH cm Lab

ITEM-50610

Ion Bench Laboratory Bench 135x120x60 LxWxH cm Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Weight: 120kg

Dimensions: Lx134 Wx120 Hx60 cm

£ 495.00 (ex. VAT) 1 in stock

Coolmed CMS300 - Medical Refrigerator Laboratory

ITEM-48409

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 490.00 (ex. VAT) 1 in stock

Coolmed CMS300 Medical & Pharmacy Refrigerator Laboratory

ITEM-48408

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 485.00 (ex. VAT) 1 in stock

Coolmed Mo. CMS300 Medical/Pharmacy Refrigerator Laboratory

ITEM-48407

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 480.00 (ex. VAT) 1 in stock

Coolmed Mod CMS300 Medical - Pharmacy Refrigerator Lab

ITEM-48406

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 470.00 (ex. VAT) 1 in stock

Coolmed CMS300 Medical - Pharmacy Refrigerator Lab

ITEM-48404

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 465.00 (ex. VAT) 1 in stock

Coolmed Medical/Pharmacy Refrigerator Model CMS300 Lab

ITEM-49849

Coolmed Medical/Pharmacy Refrigerator Model CMS300 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

As displayed in the last image, there is a small dent on the exterior.

£ 465.00 (ex. VAT) 1 in stock

Coolmed Mo. CMS300 Medical/Pharmacy Refrigerator Laboratory

ITEM-48403

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 460.00 (ex. VAT) 1 in stock

Coolmed CMS300 Medical Refrigerator Lab

ITEM-48402

Coolmed CMS300 Medical Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 455.00 (ex. VAT) 1 in stock

Coolmed CMS300 Medical - Pharmacy Refrigerator Laboratory

ITEM-49932

Coolmed CMS300 Medical/Pharmacy Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, thought there is some sticker residue on the door.

In good working order.

£ 455.00 (ex. VAT) 1 in stock

Coolmed Model CMS300 Medical/Pharmacy Refrigerator Laboratory

ITEM-49851

Coolmed Model CMS300 Medical/Pharmacy Refrigerator Laboratory

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

£ 455.00 (ex. VAT) 1 in stock

Coolmed Model CMS300 Medical/Pharmacy Refrigerator Lab

ITEM-48401

Coolmed Model CMS300 Medical/Pharmacy Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and is in good working order.

£ 455.00 (ex. VAT) 1 in stock

ELGA PURELAB Option-S 7 Water Purifier System & DV 35 Reservoir

ITEM-50254

ELGA PURELAB Option-S 7 Water Purifier System & DV 35 Reservoir

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

ELGA Composite filter (Batch No. M4/12) Use by 12/12/2025
ELGA Pretreatment Pack LC241 (Batch No. B41/22) Use by 21/02/2026
Aircomp MR 038 Mini Pressure Regulator 04A4VPOMLC

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.