All Products

£ 750.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-350 printer

ITEM-48854

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-350 Lab

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer unit has discolouring and the screen isn't very bright.

Includes:

Epson LX-350 printer
Printer connection cable

£ 750.00 (ex. VAT) 1 in stock

Tiertime UP300 Tiertime Melted Extrusion Modelling 3D Printer

ITEM-47609

Tiertime UP300 Tiertime Melted Extrusion Modelling 3D Printer

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, the client stated it was in good working order prior to removal.

Specifications;

Firmware Version - 359
Total Time - 519.5h
Model - 3DP-25-5A
S/N - 550047
FCC ID - 2AAHW-UP300

£ 750.00 (ex. VAT) 1 in stock

Jun-Air Compressor Model 12-40

ITEM-43051

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

Pressure: 12.2 bar
Minimum Operating Temperature: 10°C
Maximum Operating Temperature: 50°C

£ 750.00 (ex. VAT) 1 in stock

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

ITEM-38018

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order, we are unable to test it fully at our facility.

This kit includes the following:

1 x main remote controller Model NDJ6 Serial No. MP1410CK003211

1 x thumb controller and guide booklet

1 x iPad mini 2 16GB model A1489 serial No. F9FQ4T3AFCM8 with charger and USB cable

1 x battery charger Model MDA10116803000

1 x camera base plate DJI R-001 for RED/ Canon/ Blackmagic/ Nikon

2 x batteries model No. 824380-3400mAh-14.8v

1 x USB cable

1 x power leads

1 x 3-axis small rig connector

2 x type A quick release mounts

1 x accessory kit - 3 x allen keys, 4 x screws, 1 x locking tool

1 x Ronin-M hard carry case

1 x user manual

1 x stand

£ 750.00 (ex. VAT) 1 in stock

Taylor Hobson Model K Pantograph Engraver 110.902.324

ITEM-48758

Taylor Hobson Model K Pantograph Engraver 110.902.324

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and appears to be in good working order.

There are various marks and signs of use.

£ 750.00 (ex. VAT) 1 in stock

Carl Zeiss Stativfuss S Surgical Microscope Lab

ITEM-47103

Carl Zeiss Stativfuss S Surgical Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it fully at our facility.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

2 x ILS 1200mm K8 Industrial Fume Cupboards

ITEM-52758

2 x 1800mm K8 Industrial Fume Cupboards

These Fume Cupboards were removed from a facility where they were surplus to requirement.

The units were in good cosmetic condition; however, they were over-dismantled on site by the client and components have been mixed between the two cupboards. They will not be reassembled.

For this reason, both fume cupboards are being sold strictly as spares/repairs.

Dimensions (each unit):

1800mm (W) x 1000mm (D) x 2150mm (H)
100mm lower opening

Specification:

Trespa linings and baffle
AFA4000/2 Airow alarm
Low energy LED lamp
1 x Cold water valve and outlet
1 x DI water valve and outlet
2 x Vulcathene drip cups
2 x Vulcathene bottle traps
2 x Double switched socket outlets

£ 750.00 (ex. VAT) 1 in stock

Scanbur Scantainer Cabinet Model 50-SCNT-1-110 - Animal Welfare Lab

ITEM-42841

Scanbur Scantainer Cabinet Model 50-SCNT-1-110

This item was removed from a university laboratory where it was surplus to requirements.

The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.

The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light remained illuminated even at maximum fan speed—likely due to a blocked or saturated inlet filter on the bottom panel.

No further functionality testing was conducted.

Includes:

5 internal shelves (138 x 43cm)
4 lockable castors
Integrated fan system
Flange for optional extraction duct

Model: 50-SCNT-1-110

Cabinet Serial No.: 08064

Extractor Serial No.: 08075

£ 750.00 (ex. VAT) 1 in stock

Scanbur Scantainer Cabinet Model 50-SCNT-1-110 Lab Animal Welfare

ITEM-42844

Scanbur Scantainer Cabinet Model 50-SCNT-1-110

This item was removed from a university laboratory where it was surplus to requirements.

The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.

The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light illuminated when the fan speed was turned to half speed and lower.—likely due to a blocked or saturated inlet filter on the bottom panel.

No further functionality testing was conducted.

Includes:

5 internal shelves (138 x 43cm)
4 lockable castors
Integrated fan system
Flange for optional extraction duct

Model: 50-SCNT-1-110

Cabinet Serial No. 08066

Extractor Serial No. 08079

£ 750.00 (ex. VAT) 1 in stock

Edwards Diffstack 100 Diffusion Pump with Backing Roughing Valve Model - BRV 25

ITEM-25496

Edwards Diffstack 100 Diffusion Pump with Backing Roughing Valve Model - BRV 25

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

£ 750.00 (ex. VAT) 1 in stock

Pfeiffer Vacuum Model - TMU 262 Turbomolecular Pump Lab

ITEM-24461

This Pfeiffer Vacuum Model - TMU 262 Turbomolecular Pump was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use.

£ 750.00 (ex. VAT) 1 in stock

BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000

ITEM-24460

BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

£ 750.00 (ex. VAT) 1 in stock

BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000 Lab

ITEM-24459

BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

£ 750.00 (ex. VAT) 1 in stock

BIGNEAT Large Lab Robotics Filtered Air Enclosure Class 2 Special Lapp 220 Wide

ITEM-34622

This was removed from a university lab where it was surplus to requirements.

The cabinet was purchased in 2011 but we are told it was never used. The run hours of 53 reflect this.

It is in excellent cosmetic condition and in full working order.

Inner compartment 200 x 110 x 115cm

£ 750.00 (ex. VAT) 1 in stock

Sanyo MDF-794 Ultra Low Temperature Chest Freezer Lab

ITEM-32029

Sanyo MDF-794 Ultra Low Temperature Chest Freezer

This was removed from a university lab where it was surplus to requirements.

It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - L184 W50 D76cm

£ 750.00 (ex. VAT) 1 in stock

Berthold Technologies Mithras LB 940 Microplate Reader Lab

ITEM-31458

Berthold Technologies Mithras LB 940 Microplate Reader

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further without the software.

It is in good cosmetic condition with minor marks.

£ 750.00 (ex. VAT) 1 in stock

Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank Lab

ITEM-34946

Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested at our facility.

8 x Storage Racks - 12.5 x 8 x 48.5cm

9 sections per pack - 12.5 x 7.5cm

£ 750.00 (ex. VAT) 1 in stock

Savant Universal Vacuum System UVS400A with VaporNet Lab

ITEM-34906

Savant Universal -UVS400A- Vacuum

Model: UVS400A

SN: UVS400A-9J430168-4

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in reasonable cosmetic condition, with marks from use.

NEW ITEM

£ 750.00 (ex. VAT) 4 in stock

Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab

ITEM-52663

Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab

This item was removed from a facility where it was surplus to requirement.

It is brand new in its original packaging.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC UV Co2 Incubator Lab

ITEM-42720

Sanyo MCO-18AIC(UV) Co2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in very good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Acquity Ultra Performance LC 2996 PDA Detector Lab

ITEM-41571

Acquity Ultra Performance LC 2996 PDA Detector Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition overall.

Please note: The plastic casing is cracked as displayed, though this appears to be cosmetic and does not affect functionality.

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock

Applied Biosciences 7900HT Fast Real-Time PCR Complete System Lab

ITEM-41491

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

16A 1Phase cable

£ 750.00 (ex. VAT) 1 in stock

Applied Biosystems ABI Prism 7900HT Sequence Detection System Lab Spares/Repairs

ITEM-30573

Applied Biosystems ABI Prism 7900HT

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has the following issues.

The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.

There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues.

It is sold for spares/repairs.

The PC is included.

Dell Optiplex PC

Dell 17" Monitor

Keyboard & Mouse

USB Cable

DVI Cable

All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Perkin Elmer UV/VIS Lambda 40 Spectrometer Spares/Repair Lab

ITEM-37946

Perkin Elmer UV/VIS Lambda 40 Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on but is displaying "LAMBDA 40 1.20 BUSY" and failing to proceed past this screen. The problem may be related to the 'Lamp energy attenuator', as indicated in the manual. Further functionality remains untested. Therefore, it is listed as Spares/Repair.

Includes:

1 x Report Builder User's Guide
1 x Installation, Maintenance
1 x Operation and Parameter Description
1 x UV WinLab Operation Guide
1 x UV WinLab Tutorials
1 x UK KinLab Software Guide
Power cable

Model: Lambda 40

£ 750.00 (ex. VAT) 1 in stock

Kendro Heraeus HERAcell 150 CO2 Incubator Lab

ITEM-47519

Kendro Heraeus HERAcell 150 CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order. The interior and shelving show signs of corrosion, and the door latch mechanism is missing from the glass door.

Model: HERAcell 150

£ 750.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 CO2 Incubator Lab

ITEM-46576

Heraeus Heracell 150 CO2 Incubator

This item was removed from a university where it was surplus to requirements.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition but will require a replacement screw-in type CO2 filter, as the original has a broken end.

The unit was successfully tested using a filter from another incubator.

Model: Heracell 150

£ 750.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 Co2 Incubator Lab

ITEM-38196

Heraeus Heracell 150 Co2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition externally but the copper interior has tarnished.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-46522

Sanyo MCO-17AI CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition, although the door handle has snapped off. This does not affect its functionality.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

£ 750.00 (ex. VAT) 1 in stock

Corbett Robotics CAS1200 Liquid Handling System

ITEM-45135

Corbett Robotics CAS-1200 Liquid Handling System

This item was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good cosmetic condition.

Includes:

Manual
Model: CAS-1200

£ 750.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP Swinging Bucket Rotor Lab

ITEM-46180

Eppendorf A-2-DWP Swinging Bucket Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we have not tested it at our facility.

Specifiactions;

Capacity: 2 x deep-well plates
Max RPM: 3700
Compatible Models: 5804/5804R/5810/5810R

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab

ITEM-46521

Sanyo MCO-18AIC CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Copley DIS 6000 Dissolution Tester Lab

ITEM-50196

Copley DIS 6000 Dissolution Tester

This item was removed from a facility where it was surplus to requirements.

The unit powers on, the display lights up, and all buttons respond correctly. Speed control was tested at 50 RPM and 200 RPM, with both settings running smoothly and maintaining consistent speed. All liquid vessels present hold water without leaks, and the drain tap functions correctly. The large water vessel has visible staining.

The temperature function could not be tested as the heater is not included. No further testing has been carried out.

Included Components:

7 stirred test vessel holders
5 × 1000 ml glass vessels
6 metal paddles (without attachments)
Bag of additional accessories

Model: DIS 6000

£ 750.00 (ex. VAT) 1 in stock

LabCraft N2 Generator Model NCS 016 R

ITEM-50601

LabCraft N2 Generator (NCS 016 R)

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on. We are unable to test it further at our facility.

612930 Hours

LabCraft N2 Generator

Model: NCS 016 R
Serial Number: 98 90000115
Run Hours: 61,293.0
Flow Rate: 3 l/min
Max Pressure: 9 bar
Operating Temperature: +5°C to +45°C

£ 750.00 (ex. VAT) 1 in stock

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z Module Lab

ITEM-24239

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Included with it are;

1 x Rotary wheel control module with up, down and speed buttons. Model CS152Z Serial No. 36341

1 x 12v power adapter

£ 750.00 (ex. VAT) 1 in stock

Prior PX033 Compound Microscope W/ PaxCam EDU

ITEM-49235

Prior PX033 Compound Microscope with PaxCam EDU

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition.

The PaxCam EDU camera could not be tested as the power supply unit is not

included.

Includes:

Dust cover
Spare fuses
PaxCam EDU PX-CM-EDU (Serial No. 7020053)
2 × WF 10x/22 Eyepieces
E Plan 4x/0.10 Objective
E Plan 10x/0.25 Objective
E Plan 40x/0.65 Objective
E Plan 100x/1.25 Oil Objective
USB cable for PaxCam
Operation instructions

£ 750.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

ITEM-47673

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

ITEM-46523

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably poor cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Nuaire DH Autoflow NU-5500E CO2 Air-Jacketed Incubator Lab

ITEM-49731

Nuaire DH Autoflow CO2 Air-Jacketed Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

It was last serviced in December 2024.

£ 750.00 (ex. VAT) 1 in stock

Pharmacia Biotech FPLC System - LCC-500 UV-M II P-500 Lab

ITEM-37883

Pharmacia Biotech FPLC System

This was removed from a university lab where it was surplus to requirements.

The system has been powered up but not tested further. Everything is in reasonable to poor cosmetic condition.

All the units plugged into a power strip that supports EU plugs.

Included are;

2 x Connectivity Monitor, 004763/System No. 003763, 004518/System No. 003518

1 x Pump P-500, 017517

1 x Liquid Chromatography Controller LCC-500 Plus, 331543

1 x UV-M II, 004586

2 x MotorValve MV-7

1 x 10200 PERSPEX Peristaltic Pump, 5024

£ 750.00 (ex. VAT) 1 in stock

Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve

ITEM-37794

Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LPN1/440

Serial No. 01191

Manufactured 8.08.14

Output 440 KW/hr

Dungs gas valve DMV-DLE 520/11

Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12473, 12467

Hanning Elektro-Werke fan motor type OE7D2B-108 240v, 0.55KW

1.5" gas inlet pipe

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge

ITEM-35784

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted.

It is in good cosmetic condition with minor marks.

£ 750.00 (ex. VAT) 1 in stock

Roche Diagnostics Corporation LightTyper 96 Genotype Analyzer Lab

ITEM-36193

This Roche Diagnostics Corporation LightTyper 96 Genotype Analyzer was removed from a university lab where it was surplus to requirements

This item is in good cosmetic condition and powers up, but we are unable to test it further.

£ 750.00 (ex. VAT) 1 in stock

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

ITEM-36247

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

£ 750.00 (ex. VAT) 1 in stock

RMC MT-7 Microtome with Accessories Set Lab

ITEM-36251

RMC MT-7 Microtome with Accessories Set

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is mechanically in good working order.

It is in good cosmetic condition with minor marks.

It also includes various unnamed accessories.

These include bracket fixings, allen keys, screws, fuses, safety guards, eyepieces and other items we are unable to identify.

Also included is a dust cover and operational manuals x 3.

£ 750.00 (ex. VAT) 1 in stock

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab

ITEM-36368

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab

This was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and is made up of the following units;

1x FluidX X-Seal AAS Automated Adhesive Sealer

S/N: 1407

This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended.

Bambi VT75 Compressor

S/N: VT75-01229

52x42x61 cm

28.08 Kg

This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi.

1x SMC compressor regulator (with connecting tubes)

P/N: AW10-M5

2x Compressor connecting tubes

4x Rubber grommets

1x Roll of Clear Adhesive Seal

P/N: 43-1031

2x Spare Rollers

1x Connection Valve

1x RS232 cable

£ 750.00 (ex. VAT) 1 in stock

WATERS MECHANICAL PART FOR XEVO TQ MS EPC 4285001DC1 Lab

ITEM-38448

This WATERS MECHANICAL PART FOR XEVO TQ MS EPC 4285001DC1 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the power supply not being included, we are unable to test, therefore the item is sold as Spares or Repairs.

Power supply not included.

£ 750.00 (ex. VAT) 1 in stock

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives

ITEM-39731

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

It is made up of the following modules;

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope

Model: Axioskop

Serial# : 23 7412

Carl Zeiss Microscope Power Supply VHW 50f-2b

Model: VHW 50f-2b

Serial#: 39 26 42

Lamp hours: 254.24

Carl Zeiss NAG 2, 12V 100W Stab Power Supply

Model: NAG 2 12V 100W

Serial#: 39 25 85

Carl Zeiss HBO 50 Lamp housing

Model: HBO 50

Serial#: 44 72 20

Carl Zeiss 12V 100W Halogen HAL Lamphouse

Model: 12V 100W Halogen HAL

Serial#: 44 72 18

Pl 10x/20 Eyepiece x 2

Serial#: 44 40 32

The following Objectives:

Zeiss Plan-NEOFLUAR

2,5x/0,075 ∞/-

Serial#: 44 03 10

Zeiss ACHROPLAN

40x/0,65 ∞/0,17

Serial#: 44 00 50

Olympus SPlan20PL

0,46 160/0,17

Serial#: 80 63 58

Zeiss ACHROPLAN

10x/0,25 Ph1 ∞/-

Serial#: 44 00 31

Zeiss ACHROSTIGMAT

5x/0,12 ∞/-

Serial#: 44 01 20

£ 750.00 (ex. VAT) 1 in stock

Jouan Water Jacketed Incubator Model IG150 Lab

ITEM-29770

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.

It is in good cosmetic condition with minor marks.

Internal dimensions are: L41cm x W41cm x H60cm.

All Products

Filters