Beckman Coulter Particle Count & Size Analyser Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner sated it was in good working order prior to removal.

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it was surplus to requirements.

The system is in good used cosmetic condition. The lab confirmed it was in working order prior to removal.

We have been able to connect the unit to the PC, but are unable to test it further.

It consists of the following parts:

1 x Applied Biosystems 7900HT

Part no. 4330966

SN - 279002990

1 x SICK CLV422-1910S02 Fixed barcode scanner

1 x AB 7067/4 Microplate stacker.

1 x Symbol Barcode Scanner.

1 x Dell Optiplex 960 PC with Dell Monitor, keyboard and mouse.

The has the following software installed:-

Applied Biosystems 7900HT Version 2.4 Sequence Detection Systems (SDS)

Applied Biosystems RQ Manager Version 1.2.1

We have all the passwords, which are available on request once the system has been sold.

Edwards Speedivac Vapour Diffusion Pump EO2 Rig w/ Pressure Gauge

This item was removed from a university where it was surplus to requirement.

It is in good overall cosmetic condition, we are unable to test it at our facility.

The previous owner stated it is in good working order.

Edwards Diffstak 160 Vapour Diffusion Pump Rig w/ Pressure Gauge

This item was removed from a university where it was surplus to requirement.

It is in good overall cosmetic condition, we are unable to test it at our facility.

The previous owner stated it is in good working order.

Please note: There is no plug attached.

Haier HLR-310SF Laboratory Refrigerator With Explosion-Proof Interior Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

LC Packings FAMOS Carousel Microautosampler

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition both externally and internally. The model includes a tray chiller.

Basic functionality has been verified, including the raising and lowering of the needle and the movement of the well plate tray into position.

Includes:

• Connector Set for UltiMate ULT-CS (P/N: 160081)
• Connector Set for Switchos (P/N: 160184)
• Cable for Controlling Switchos by UltiMate SW-ULT-EV (P/N: 160172)
• 2.4 μl injection needle FAMOS 100 μm I.D./280 μm O.D. FMS-NDL-100 (P/N: 160116)
• Additional unlabelled 2.4 μl needle
• Replacement H01 needle

Model: FAMOS

Eksigent NanoLC-1D Plus HPLC System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes;

• 4x 6" Glass Chromatography Columns w/ Stopcock & Pyrex Standard Tapered Stopper
• Various Cables to Connect to Other Elements of HPLC system.

Thermo Scientific SC 100 Immersion Circulator

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and is in good working order.

Includes:

• Thermo Scientific SC 100 Immersion Circulator

Model: SC 100

Serial No.: 1121276001190613

Run hours:

• Unit 230 hrs.
• Pump 158 hrs.

Panasonic CO2 Incubator MCO-18AC-PE Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has fully tested

Specifications;

• Model: 170-300
• S/N: 2434

This Binder C150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with marks from use.

It is in good working order but will require calibration upon installation.

The internal dimensions are H 59cm x W 49cm D 49cm

There are 3 shelves with 6 fitting positions

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab

These items were removed from a university lab where they were surplus to requirement.

All items are in good cosmetic condition but have not been tested.

The items included are as follows:

• 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g)
• 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g)
• 3 x Tube Holders For 15-25ml Tubes
• 4 x Tube Holders 50ml Tubes

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System

This system was removed from a laboratory where it was surplus to requirements.

Both units power up and are in good cosmetic condition with marks from use.

It comes with 8 x Trays (53.5 x 16cm). One tray has been labelled as 'Not moving'

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack

These were removed from a university lab where they were surplus to requirements.

They have been fully tested to incubate and shake by a service engineer. They are in full working order.

Inside dimensions - D57 W93 H44cm

Platform - 46 x 77cm

They come with brackets for stacking, but there are only 3 feet and one of them is broken.

This Zeiss Axioskop Fluorescence Microscope System was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition but has some marks from use.

Does not include PSU for the mercury lamp, but it has been tested.

Included with it are;

2 x Eyepieces

Zeiss Pl 10x/20 (44 40 32)

3 x objectives

Zeiss plan-NEOFLUAR 100x/1,30 oil (44 04 81) PH3

Zeiss plan-NEOFLUAR 40x/0.75 oil (44 03 51) PH2

Zeiss plan-NEOFLUAR 20x/0.50 oil (44 03 41) Ph2

Nanoentek ADAM-MC Automatic Cell Counter with Keypad

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test to further at our facility.

It is in good cosmetic condition with minor marks.

This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable.

It was tested with a temperature and CO2 sensor (not included).

Internal dimensions are: L44cm x W49cm x H60cm.

This Ready to Process Wave 25 Bioreactor System was removed from a university lab where it was surplus to requirements.

None of the items have been tested because the power supply was not included.

The system is in good cosmetic condition with minor marks from use.

Included are;

1x GE Ready to Process CBCU

Code no.28998100

Mfg year 2015

1x GE Ready to Process Pump 25 w/ 2x pump heads

Code No. 29000704

Mfg year 2015

There is some damage to the housing of the unit on the bottom LHS of the unit -as seen in photo.

2x PumpHeads:

114DV OEM Pumpheads

Prod Nos.

113.5000.R33

Ser Nos.

66056-2

66056-3

Mfg 2015

1x Icellis Docking Station

Prod No. 820284

The unit is in good cosmetic condition

The unit has a 32 Oz Nalgene vessel,

1x PALL Life Sciences Icellis Nano lid

Ser No. P004_G_169

1x Hamilton Visiferm DO 120 Sensor:

Part no. 242450

Heat Nos.

•541742

•425755

Ser No. 026570

1x Icellis Perfusion Module w/ 2x pump heads

Prod No. 820288

Pumpheads:

102R Twin Roller low-flow

Prod No. 013.211.000

Viscotek GPCmax VE 2001 GPC Solvent/Sample Module

This was removed from a university lab where it was surplus to requirements.

The unit powers up an is in good cosmetic condition with minor marks.

SIS Linos CL 1.4/50 Macro-2 MegaView Camera for Electron Microscope

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and contains the following camera and housing. We were unable to test this at our facility.

Model: Linos CL 1.4/50 Macro-2 MegaView

Serial#: 0395

Barcode#: 07640521

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives

This was removed from a university lab where it was surplus to requirements.

The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear.

Due to the power supply not being included, we are unable to test further.

Includes the following untested objectives;

Gallenkamp 160/0.17 100 1.25 oil

Zeiss Achroplan 10x/0,25 ∞/-

Zeiss Epiplan 50x/0,50 44 28 50

Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5

Zeiss Achrostigmat 5x/0,12 44 01 20

JEOL JSM 840A  SEM Scanning Electron Microscope System

This was removed from a university lab where it was surplus to requirements.

The lab confirmed it was in working order prior to removal, but the control panel was removed and sold separately. It has not been tested at all at our facility but it is in good cosmetic condition with marks from use.

Included are;

Main unit:

1 x JEOL JSM-840A Scanning Microscope

Model: JSM-840A

Serial#: EP130077

Item has attached:

1 x Oxford Instruments 6605

Serial#: 09091-3390-339-521

Power Supply Unit:

JEOL JSM-840A Main Power CSL

Model: JSM-840A Main Power CSL

Serial#: EP130077-40

Also included:

JEOL Pump

Model: N/A

Serial#: N/A

Good cosmetic condition.

Lx36Wx24Hx50cm

JEOL JSM-840A User Manual

JEOL JSM-840A Service Case

This contains:

JEOL Extender MP001569-01

Various washers, fixings, screws etc.

Carbolite Type OAF 11/1 Ashing Muffle Furncace

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order to 1100˚C.

It is in good cosmetic condition with marks from general use.

Syngene G-Box F3 Gel Imaging System

This was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further without connection to a PC. The Transilluminator is missing a few bulbs but is working.

It is in reasonable cosmetic condition but has heavy staining inside.

Included are;

Includes:

-Mitsubishi P93D Printer

-Digital Monochrome Printer Driver Disc Version 1.2

Printer is functional

Model- G-Box F3

Serial number- DR4V2/2703

Model- P93DW

Serial number- 6011497

Quattroflow Fluid Systems 1200 Quaternary Diaphragm Pump QF 1200-SU

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

It is in good cosmetic condition with minor marks.

12cm Diaphragm

2200 RPM

Model- Quattroflow CV

Serial number- 673786

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

Max RPM-1800

Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes.

Centrifuge model number- VR maxi-1

Centrifuge serial number- 804040235

Freeze dryer model number- CT/DW 110

Freeze dryer serial number- 804050097

Maxi dry model number- MAXI-DRY PLUS

Maxi dry serial number- 804060037

Pfeiffer Turbo-V 301 Navigator  Model#: 9698918S003 Turbomolecular Pump Lab

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks.

Barnstead Genevac miVac Duo Concentrator DUC-23050-A00

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working to 1400rpm, and the heating function is also working. It has not been tested under a vacuum.

It is in good cosmetic condition with minor marks form use. There is some cosmetic crazing on the lid.

FLUIDX X-seal HT124S Variable Temperature Thermal Sealer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

FLUIDX X-seal Thermal Sealer

Model: Xseal HT124S

Serial#: 41135

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

This was removed from a university lab where it was surplus to requirements.

All the units power up but have not been tested further.

It is in good cosmetic condition with minor marks.

It is made up of the following modules;

1x Tecan RSP 5031 Robotic Sample Processor

S/N: 1652 JR

1x Emka STC 8808

S/N: 00454

1x Emka IOS 3

S/N: 00371

1x Emka Switching Unit

S/N: No serial number

1x Haake DC10 Circulator

Type: 003-2859

S/N: 1WDIN12879

Varian CP-3800 Gas Chromatograph System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order when it was last in use.

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it was surplus to requirements.

The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility.

There is some chipped paint along the top of the unit and scuffs and scratches from general use.

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation

This was removed from a university lab where it was surplus to requirements.

The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks.

It is fitted with a pipette head with 96 tips at 300µl.

This Statebourne Biostor 24 Cryogenic Liquid Nitrogen Storage Dewar was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in reasonably good cosmetic condition with some marks from use.

Specs;

Volume 380L

Internal diameter 788mm

External diameter 900mm

Internal height 835mm

External height 1193mm

Gilson HPLC System & Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C

This was removed from a university lab where it was surplus to requirements.

This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order.

Included are;

1x Gilson XL Sampling injector:

Model 231

The unit powers on and is in good cosmetic condition

2x Gilson Piston Pumps:

Model 306

The units both power on and are in good cosmetic condition.

1x 15 pin MALE to FEMALE Ribbon cable:

The unit is in good cosmetic condition.

1x Gilson Manometric Module:

Model 805

The unit is in good cosmetic condition.

There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump.

1x Gilson Dynamic Mixer:

Model 811B

The unit powers on and is in good cosmetic condition.

1x Gilson Temperature Regulator:

Model 832

• Version 1.01

The unit powers on and is in good cosmetic condition.

1x Gilson Collum Chiller:

Model 7955

The unit powers on and is in reasonable cosmetic condition.

1x Gilson UV/VIS Detector:

Model 119

•Version 2.01

The unit powers on and is in good cosmetic condition.

1x Gilson 506C System Interface unit:

The unit is in good cosmetic condition. No sign of power.

1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)

The unit is in good cosmetic condition.

1x 25pin Male to 9pin FEMALE connector adaptor.

The unit is in good cosmetic condition.

1x Gilson Dilutor:

Model 401 

The unit powers on and is in good cosmetic condition.

1x Decade Electrochemical Amperometric Detector:

ANTEC Leyden

Version 3.02

The unit powers on and is in good cosmetic condition.

1x Viglen Contender PC:

Model C3000A

*OS

Windows 98

•Software

UniPoint LC Version 3.01

The unit powers on.

Accessories:

1x Viglen Monitor

Model TS700

The unit powers on and is in good cosmetic condition.

1x Viglen Keyboard

Model KB-0325

•PS/2 connector

The unit is in good working and cosmetic condition 

1x Microsoft Mouse:

FCC ID: c3kkmp1

•PS/2 connector

1x VGA Cable:

The unit is in good working and cosmetic condition.

CD:

1x Gilson UNIPOINT for Windows 98

Version 3.0

Floppy Disk:

Gilson System Software:

•Version 1.71

•Disks 1 - 4

Ser no. 219H8B765

The units are in good cosmetic condition.

•Win32s Disks 1-2

The units are in good cosmetic condition.

2x Gilson 10WSC heads (cases)

Ref E50056

• 3x Gilson WSC Pistion Pump Head user guides are inside the cases.

1x Gilson Thermostatic Rack Unit:

Ser no. 270J1G048

The unit powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition.

Gilson Racks for the thermostatic unit.

1x Rack Well, 60x 2ml glass or plastic vials.

Part no 30

1x Rack Well, 108 x 0.7ml glass or plastic vials.

Part no 31

The units are in good cosmetic condition.

1x Gilson Serial Input/Output Channel:

5 sets of( 2x FEMALE to 1x MALE 9pin connectors)

Manuals:

1x Unipoint system software: (Folder)

The manual is in good condition and appears to be complete.

1x Gilson 506C System Interface User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 401 Dilutor Instruction manual:

The manual is in good condition and appears to be complete.

2x Gilson 231-401 Auto Sampling Injector Instruction manual:

The manuals are in good condition and appear to be complete.

1x Gilson 119 uv/VIS Detector User Guide:

The manual is in good condition and appears to be complete.

1x 802C. 803C, 804C Manometric Module Instruction manual:

The manual is in good condition and appears to be complete.

2x Gilson 306 Piston Pump User Guide:

The manuals are in good condition and appear to be complete.

3x Gilson WSC Pistion Pump Head User Guides:

The manuals are in good condition and appear to be complete.

1x Gilson UNIPOINT for Windows 98 User Guide:

The manual is in good condition and appears to be complete.

2x 1x Decade Electrochemical Amperometric Detector Manuals:

The manuals are in good condition and appear to be complete.

1x Gilson 832 Temperature Regulator User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 811B Dynamic Mixer User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 805-806-807 Manometric Modules User Guide:

The manual is in good condition and appears to be complete.

1x Gilson SC- type Piston pump head Instruction manual:

The manual is in good condition and appears to be complete.

1x Gilson 506C System Interface User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 506 Contact/ Modem Operators Guide:

The manual is in good condition and appears to be complete.

Syringes:

2x Phenomenex HPLC Columns:

Model SYNERGI 4U Hydro- RP 80A

1x •Size 250x4.60mm

1x •Size 250x3.00mm

The units are in good cosmetic condition.

1x Phenomenex HPLC Column:

Model SYNERGI 4U Polar - RP 80A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model HyperClone 5u ODS (C18) 120A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model HyperClone 5u SILICA 120A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model Phenosphere - NEXT 5u C18

•Size 250x4.60mm

The unit is in good cosmetic condition.

2x HYPERSIL (5u ODS) Syringes:

Prod no. 30105-062

•Size 150x4.60mm

The units are in good cosmetic condition.

1x HYPERSIL (5u HyPURITY) Syringe:

Prod no. 21005-022

•Size 150x4.60mm

The unit is in good cosmetic condition.

2x HYPERSIL (ELITE C18 5u) Syringes:

Prod no. 30105-062

•Size 150x4.60mm

The units are in good cosmetic condition.

2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:

Part no. 00G-4375-E0

•Size 250x4.60mm

The units are in good cosmetic condition.

1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe:

•Size 100x2.00mm

The unit is in good cosmetic condition.

1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe:

•Size 150x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex LUNA 3u c18(2) 100A Syringe:

•Size 100x2.00mm

The unit is in good cosmetic condition.

2x HYPERSIL 3 C18 Syringes:

•Size 100x4.60mm

The units are in good cosmetic condition.

1x Phenomenex BIOSep- SEC-S 200 Syringe:

•Size 300x7.80mm

The unit is in good cosmetic condition.

1x Phenomenex JUPITER 5u C18 300A Syringe:

•Size 150x4.60mm

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 1802RSNE

•25uL

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 1801RSNE

•10uL

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 801RNE WAT

•10uL

The unit is in good cosmetic condition.