All Products

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Beckman J-6M/E Centrifuge with JE-5.0 Elutriator Rotor & Strobe Light

ITEM-58335

Beckman J-6M/E Centrifuge with JE-5.0 Elutriator Rotor & Strobe Light

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

Beckman Rotor JE-5.0 S/N - 338 Max RPM - 5000

Accessories;

2 x Beckman Coulter JE-5.0 Elutriation System Instruction Manual
Rotor Allen key tool

£ 2,000.00 (ex. VAT) 1 in stock

A Taylor & C.O Potters Plaster Turning Lathe

ITEM-54311

A Taylor & C.O Potters Plaster Turning Lathe

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The emergency stop is not wired in.

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Jeiotech Lab Companion Mediline Incubated Shaker Model IST-3075R

ITEM-56207

Lab Companion Mediline Incubated Shaker Model IST-3075R

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 12/05/2023

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Snijders Scientific Model MC1000VHOE-EVD Plant Growth Cabinet

ITEM-56348

Snijders Scientific Model MC1000VHOE-EVD Plant Growth Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Guava Technologies EasyCyte Plus Flow Cytometer W/ Accessories and Software

ITEM-56587

Guava Technologies EasyCyte Plus Flow Cytometer W/ Accessories and Software

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Motic AE31 Inverted Microscope w/ 3 x Objectives PH10/20/40x Lab

ITEM-55081

Motic AE31 Inverted Microscope w/ 3 x Objectives PH10/20/40x Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, it is currently not working due to no transmitted light.

It is therefore listed as Spares/Repair

Eyepieces

2 x WF Pl 10X / 22

Objectives

1 x LWD Ph40X/0.60
1 x LWD PH20X/0.40
1 x PH10X/0.25

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Binder C150 CO2 Laboratory Incubator Double Stack Lab

ITEM-50995

Binder C150 C02 Laboratory Incubator Double Stack Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave Lab

ITEM-53053

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45129

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 2295
M24 Controller

£ 2,000.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45128

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 1861
M24 Controller

£ 2,000.00 (ex. VAT) 1 in stock

Boxer 300/150LR Steam Steriliser Autoclave Lab

ITEM-44966

Boxer 300/150LR Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit has one missing wheel and another damaged, so it is currently placed on a pallet with blocks. It also requires a plug to be fitted.

Working Condition: The previous client has stated that it was in working order prior to removal. We have not tested it at our facility due to the absence of the plug.

Specifications:

Model: 300/150LR
Serial No.: M2436/87772
Chamber Dimensions: Approximately 540mm diameter x 610mm long
Capacity: Approximately 150 liters
Internal Pressure: 38.7 psi @ 140°C
Power Supply: 415V, 3 phase, 50Hz

£ 2,000.00 (ex. VAT) 1 in stock

Applied Biosystems Hitachi 3130 Genetic Analyzer Lab

ITEM-38566

Applied Biosystems Hitachi 3130 Genetic Analyzer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in good working condition prior to removal, however it does not include a working capillary array (4 channel).

Also includes the following items:

3130 Genetic Analyzer Data Collection Software

3130 Genetic Analyzer Calibration File 627-4161 S/N - 18323-017 (Floppy Disc)

3130 Genetic Analyzer Operator Training - P/N -4365947 (CD)

3130 Genetic Analyzer Documentation - P/N -4362019 (CD)

31XX Family Service Tools - P/N -4361102 (CD)

3130 Genetic Analyzer Data Collection Software v3.0 - P/N -4363485 (CD)

Persistence JNDI-Library - P/N -4347111 (CD)

PowerQuest V2i Protector 2.0 Desktop Edition (CD)

SeqScape Software Version 2.5

ABI Prism SeqScape Software Version 2.x Tutorial (Booklet)

SeqScape Software Version 2.5 User Guide (Booklet)

GeneMapper Software Full Install Version 4.0

GeneMapper Software v4.0 Full Install - P/N -4367070 (CD)

GeneMapper Software v4.0 Documentation - P/N -4366876 (CD)

GeneMapper Software Version 4.0 Installation and Administration Guide (Booklet)

GeneMapper Software Version 4.0 Reference and Troubleshooting Guide (Booklet)

GeneMapper Software Version 4.0 SNaPshot Kit Analysis Getting Started Guide (Booklet)

GeneMapper Software Version 4.0 SNPlex System Analysis Getting Started Guide (Booklet)

GeneMapper Software Version 4.0 Loss of Heterozygosity LOH Analysis Getting Started Guide (Booklet)

AB DNA Sequencing Analysis Software v5.2

AB DNA Sequencing Analysis Software v5.2 - P/N - 4363737 (CD)

AB DNA Sequencing Analysis Software v5.2 Patch 2 - P/N - 4366168 (CD)

SeqScape Analysis Software v2.5 - P/N - 4363736 (CD)

ABI Prism SeqScape Software v2.5 - P/N - 4352544 (CD)

DNA Sequencing Analysis Software Version 5.1 for Windows XP and 2000 Platforms User Guide (Booklet)

BigDye Terminator v3.1 Cycle Sequencing Kit Protocol (Booklet)

2 X 3100 Avant Capillary Array 36 cm Part No. - 4333464

£ 2,000.00 (ex. VAT) 1 in stock

Leybold Trivac D40B & RUvac WAU251 Vacuum System Lab

ITEM-34933

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

Type: WAU251
Catalog No.: 11721
Serial No.: B891200093

Leybold TRIVAC:

Type: D40B
Catalog No.: 112 86
Serial No.: A881100069

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat Microplate Hotel Lab

ITEM-10958

Thermo Scientific Cytomat Microplate Hotel

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks. We have no key for the lock, but it is unlocked.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Bruker Autoflex III Smartbeam MALDI-TOF/TOF Mass Spectrometer

ITEM-42915

Bruker Autoflex III Smartbeam MALDI-TOF/TOF Mass Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The item has not been powered on. The previous owner reported that it is not holding high voltage.

Upon inspection, several internal earthing cables were found disconnected, with missing fittings preventing proper reconnection. No further testing has been performed.

Therefore, it is listed as Spares/Repair.

The item is in good condition with minimal wear.

Includes:

Bruker Autoflex III LRF200-CID unit
Model: Autoflex III LRF200-CID
Serial No.: 238320.00174
Autoflex III TOF/TOF 200 Upgrade Module
Model: Autoflex III TOF/TOF 200 Upgrade
Serial No.: 238320.00174

£ 2,000.00 (ex. VAT) 1 in stock

Ruskinn Invivo2 400 Hypoxia Workstation Lab

ITEM-44520

3M Invivo2 400 Hypoxia Workstation Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

£ 2,000.00 (ex. VAT) 1 in stock

Qiagen QiaCube w/ Various Accessories - Rotor Adapters, Reagent Racks & Bottles

ITEM-56442

Qiagen QIAcube Automated Sample Preparation System with Various Accessories – Rotor Adapters, Reagent Racks & Bottles

This item was removed from a facility where it was surplus to requirement.

The unit powers on and completed the initialisation process, we are unable to test it further at our facility.

Installed Rotor:

Qiagen Rotor – Part No. 7500338
Maximum service life: 20,000 cycles
Maximum load: 12 × 15 g
Maximum speed: 10,640 RPM

Included Accessories

3 × Boxes of rotor adapters (10 × 24 format)
Filter tips, 1000 µL
Approximately 500 × 2 mL sample tubes
11 × Reagent bottle racks
4 × Elution microplate adapters
Rotor adapter holder (Cat. No. 990392)

£ 2,000.00 (ex. VAT) 1 in stock

ThinkLaser LightBlade 3040 40W Laserjet Cutter

ITEM-56793

ThinkLaser LightBlade 3040 40W Laserjet Cutter

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Specifications;

Fitted with Laser;

Brand: BEIJING EFR LASER S&T CO.,LTD.
Model: 800CL
Serial Number: 038-0921-007
Date: 2019-2-12

Wavelength: 10600nm
Max O/P: 40W CW

£ 2,000.00 (ex. VAT) 1 in stock

Buehler / Metaserv Pneumet II Mounting Press with Mold Heater-Cooler

ITEM-56766

Buehler / Metaserv Pneumet II Mounting Press with Mold Heater-Cooler

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

P.A.Hilton LTD Heat Exchanger Service Unit W/ Tube Heat Exchanger

ITEM-50679

P.A. Hilton Ltd Heat Exchanger Service Unit w/ Tube Heat Exchanger (Incl. NI USB-6221)

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition. During testing, the main service unit powers on. No further functional testing has been carried out at our facility.

Also included is a National Instruments NI USB-6221 connected to the main unit; however, this interface did not power on during testing.

Included with the sale:

P.A. Hilton heat exchanger service unit

Tube heat exchanger

National Instruments NI USB-6221 (non-powering)

£ 2,000.00 (ex. VAT) 1 in stock

P.A.Hilton LTD Concentric Tube Heat Exchanger Lab

ITEM-50680

P.A.Hilton LTD Concentric Tube Heat Exchanger

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

Oxford Instruments CBD0000 Magnetic Power Supply

ITEM-56668

Oxford Instruments CBD0000 Magnetic Power Supply

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: There is no power supply cable included.

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Scanlaf Mars 1200 Class II Biological Safety Cabinet w/ Stand Lab

ITEM-50302

Scanlaf Mars 1200 Class II Biological Safety Cabinet w/ Stand Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. (Socket tester not included.)

It is in good cosmetic condition.

UV Run Time: 1435
Fan Run Time: 12262

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss Axio Vert.A1 FL Inverted Transmitted Light Microscope Lab

ITEM-31570

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
Reflector modules: DAPI, FITC, TRITC, empty

1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
Position 1: empty
Position 2: 424228-9060 0.05T Neutral density filter 0.05
Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
Position 5: empty

1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

1 x Camera adapter 60N-C 2/3" 0.5x (426112)

1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

£ 2,000.00 (ex. VAT) 1 in stock

VWR DL 53 Dry-Line Drying Oven Lab

ITEM-51611

VWR DL 53 Dry-Line Drying Oven 63x68x60 cm Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, however, the door seal has began to perish.

£ 2,000.00 (ex. VAT) 1 in stock

Medical Electronic Systems SQA-iO Automated Semen Analyser Lab

ITEM-51132

Medical Electronic Systems SQA-iO Automated Semen Analyser

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition but remains untested at our facility, as it requires connection to a compatible PC with the relevant software. The previous owner stated it was in working order prior to removal.

No further testing has been carried out at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific U725 -86 Ultra Low Temperature Freezer

ITEM-54710

New Brunswick Scientific U725 -86 Ultra Low Temperature Freezer

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Biolin Scientific Theta Lite Optical Tensiometer

ITEM-49691

Biolin Scientific Theta Lite Optical Tensiometer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; The powers supply is not included.

£ 2,000.00 (ex. VAT) 1 in stock

IonSense DART Controller SVP100 and Source JVLC-1007-A Lab

ITEM-51222

IonSense DART Controller SVP100 and Source JVLC-1007-A Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

Pall Life Sciences 650L Magnetic Mixer Vessel w/ Minebea Intec Midrics 2 2021

ITEM-55393

Pall Life Sciences 650L Magnetic Mixer Vessel w/ Minebea Intec Midrics 2 2021

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Pall Life Sciences 650L Magnetic Mixer Vessel w/ Minebea Intec Midrics 2 2021

ITEM-55385

Pall Life Sciences 650L Magnetic Mixer Vessel w/ Minebea Intec Midrics 2 2021

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Oxford Instruments Superconducting Magnet System

ITEM-56681

Oxford Instruments Superconducting Magnet System w/ Nitrogen/Helium Gauge

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Universal Laser Systems Laser Cutter with Denford Fume Extraction

ITEM-58428

Universal Laser Systems Laser Cutter with Denford Fume Extraction

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The Universal Laser Systems unit is a laser cutting and engraving system suitable for cutting, marking and engraving compatible materials.

The system is supplied with a Denford Advantage laser fume extraction unit and an Estrasil auto transformer.

The system is in working order.

The client has advised they are able to bubble wrap the item only. Buyers should make their own arrangements for appropriate collection, lifting, palletisation, crating and transport.

Includes;

1 x Universal Laser Systems laser cutter / engraver

1 x Denford Advantage laser fume extraction unit

1 x Estrasil auto transformer

Specifications;

Manufacturer: Universal Laser Systems

Fume extraction: Denford Advantage Laser Fume Extraction

Transformer: Estrasil auto transformer

Transformer input: 380–440V

Transformer output: 200–220V

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Binder C150 CO2 Laboratory Incubator Double Stack Lab

ITEM-50994

Binder C150 C02 Laboratory Incubator Double Stack Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: when set to 37°C, the unit runs between approximately 36–37°C, so calibration is recommended before use.

£ 2,000.00 (ex. VAT) 1 in stock

Sanyo MDF-U72V Ultra Low Temperature Freezer -80ºc Lab

ITEM-56085

Sanyo MDF-U72V Ultra Low Temperature Freezer -80ºc Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The backup battery has failed.

£ 2,000.00 (ex. VAT) 1 in stock

Struers Planopol-2 & Pedemax-2 Grinding & Polishing Machine

ITEM-51017

Struers Planopol-2 & Pedemax-2 Grinding & Polishing Machine

This item was removed from a facility where it was surplus to requirement.

Both units power on with no issues noted.

£ 2,000.00 (ex. VAT) 1 in stock

Rondol Laboratory Strand Pelletizer / Granulator w/ 3x Cutter Die Plates

ITEM-52920

Rondol Laboratory Strand Pelletizer / Granulator w/ 3x Cutter Die Plates

This item was removed from a facility where it was surplus to requirements.

The unit has not been powered on or function-tested, as we do not have a compatible power supply available.

As a result, the emergency stop function has also not been tested.

The unit is fitted with adjustable feet and is supplied with:

3 x spare cutter/die plates, as pictured
Industrial power connection/cable with a 16-pin connector
Connector rating marked: 16A / 500V / 6kV

Please note that the unit is being sold on an untested basis.

Please review the images carefully for the overall condition, connection type and included accessories.

£ 2,000.00 (ex. VAT) 1 in stock

Forma Scientific Cryoplus 2 Model 7403

ITEM-58624

Forma Scientific Cryoplus 2 Model 7403

This item was removed from a facility where it was surplus to requirements.

The unit has a minor display fault, with some of the screen lights not illuminating correctly.

£ 2,000.00 (ex. VAT) 1 in stock

Brabender Plasticord PLE Instruments Model PL 2200 Torque Rheometer

ITEM-57172

Brabender Plasticord PLE Instruments Model PL 2200

This item was removed from a facility where it was surplus to requirements.

The previous owner stated it was in working order when it was last used. Due to the limitations of our testing setup, the system has not been fully function-tested beyond the checks described above.

The emergency stop on the bottom element appears functional. When engaged, pressing the Start button produces no response.

Please also note:

One of the EU power socket covers is cracked.
Included cables are shown in the images.
A threaded rod measuring approximately 1 metre is also included.

Please review the images carefully for the overall condition, included components and connections.

£ 2,000.00 (ex. VAT) 1 in stock

Foster + Freeman VSC 4C Video Spectral Comparator

ITEM-53670

Foster + Freeman VSC 4C Video Spectral Comparator

This item was removed from a facility where it was surplus to requirement.

The previous owner stated that the unit was in working order prior to removaL.

Please note the following;

3 of the 4 UV bulbs are not working - UV bulb type: Philips TL 8W/08 F8 T5/BLB
The "Video Out" port appears to be damaged

Please review the images carefully for the overall condition and included accessories.

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Baker Company SG503HE-BC-INT SterilGARD Class II Biosafety Cabinet

ITEM-58623

Baker Company SG503HE-BC-INT SterilGARD Class II Biosafety Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 09/2022

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Binder C150 Benchtop Incubator

ITEM-60192

Binder C150 Benchtop Incubator

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Electron Neslab Merlin M33 Recirculating Chiller Lab

ITEM-60238

Thermo Electron Neslab Merlin M33 Recirculating Chiller Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

P.A.L.M. Microlaser Technologies PALM MicroBeam Precision LCM/LCP

ITEM-60510

P.A.L.M. Microlaser Technologies PALM MicroBeam Precision LCM/LCP

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

It was removed from a Zeiss Axiovert 200M Inverted Microscope System

£ 2,000.00 (ex. VAT) 1 in stock

Affymetrix GeneChip Scanner 3000 Autoloader

ITEM-51191

Affymetrix GeneChip Scanner 3000 Autoloader

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Scientific SLA-3000 Super-Lite Rotor 120000 RPM Lab

ITEM-52689

Thermo Scientific SLA-3000 Super-Lite Rotor 120000 RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in poor cosmetic condition and remains untested.

RECERTIFIED ITEM

£ 2,000.00 (ex. VAT) 1 in stock

New Brunswick Galaxy 170 R CO2 Incubator Double Stack

ITEM-56086

New Brunswick Galaxy 170 R CO2 Incubator Double Stack

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 11/05/2023

£ 2,000.00 (ex. VAT) 1 in stock

Source BioScience Controlled Environment Storage Chamber Model: 5804-5

ITEM-58074

Source BioScience Controlled Environment Storage Chamber Model 5804-5

This item was removed from a facility where it was surplus to requirements.

It is in good working order.

Please note: It will require calibrating before use.

£ 2,000.00 (ex. VAT) 1 in stock

Source BioScience Controlled Environment Storage Chamber Model: 5804-5

ITEM-58075

Source BioScience Controlled Environment Storage Chamber Model 5804-5

This item was removed from a facility where it was surplus to requirements.

It is in good working order.

Please note: It will require calibrating before use.

£ 2,000.00 (ex. VAT) 1 in stock

Astell ASA240 Floorstanding Autoclave Lab

ITEM-39206

Astell ASA240 Floorstanding Autoclave

This item was removed from a university where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

Please note: It is in poor cosmetic condition internally.