Items 1381 to 1400 of 3950

Image of item

£ 49.21 (ex. VAT) 1 in stock

ENRAF NONIUS DELFT White Trolley / Desk for Medical / Physiotherapy Use Lab

ITEM-16918

This ENRAF NONIUS DELFT White Trolley/Desk for Medical/Physiotherapy Use was removed from a university laboratory where it was surplus to requirements


The top shelf is 50 x 37 and the bottom shelf is 50x42


The drawer internal size is 36x38.


It has four rubber wheels that can move in any direction.


The unit is in overall good condition with minor age/usage marks.


Image of item

£ 60.00 (ex. VAT) 1 in stock

EO Edmund Industrial Optics Model 21AC StockerYale Fibre Optic Light Source Lab

ITEM-15337

EO Edmund Industrial Optics Model 21AC StockerYale Fibre Optic Light Source


This was removed from a laboratory where it was surplus to requirements. It is in good, used cosmetic condition.


The unit powers on and seems to be working correctly. The light intensity changes when the dial is adjusted. It has not been tested any further.






Image of item

£ 321.52 (ex. VAT) 1 in stock

Eppendorf 5331 MasterCycler PCR Gradient Thermal Cycler Lab Spares Repairs

ITEM-09161

This unit was removed from a lab during a clearout.


We powered on the unit, but unfortunately the digital display is very poorly illuminated and so its impossible to read the output of the unit. We have not been able to run any further tests.


Unit is sold as spares / repairs.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Eppendorf 5414 1420 Benchtop Laboratory Centrifuge 12000rpm Lab

ITEM-16632

This Eppendorf 5414 Benchtop Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.


The unit is in reasonable, used cosmetic condition but it does have quite a bit of staining to the outer plastic. Also inside the main chamber is a bit stained. It appears as well that the inspection plastic is missing from the top of the lid so the main compartment is not fully covered.


It runs as it should though. The timer and standard spin mode work fine.


The rotor has 12 holes and they measure 11mm x 45mm approx. It is rated at 12000rpm.


Image of item

£ 160.76 (ex. VAT) 1 in stock

Eppendorf 5414 Lab Centrifuge + 12-Piece Rotor

ITEM-10242

This unit was removed from a university lab as surplus to requirements.


We have tested the unit at max speed and it runs, but is quite noisy.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Eppendorf 5415 D Centrifuge AG 22331 Spares or Repair Lab

ITEM-15403

This Eppendorf 5415 D Centrifuge was removed from a lab during a clearance.


The unit is in good cosmetic condition but does not power up. The lab it was removed from reported that it was damaged during a power surge. It does make some high pitched noises when plugged in but we suspect the transformer is blown.


There is no rotor included.


Spares or Repair.



Image of item

£ 112.50 (ex. VAT) 1 in stock

Eppendorf 5415D Digital Benchtop Centrifuge Lab - Spares / Repairs

ITEM-15319

This Eppendorf 5415D Centrifuge was removed from a university where it was surplus to requirements.


The unit did not power up in testing so we were unable to test it. It is in good cosmetic condition but there is no rotor incuded.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Eppendorf 5415D Lab Centrifuge + 13200rpm Rotor, Faulty, Spares / Repairs Lab

ITEM-04584

This Eppendorf 5415D Centrifuge With 13200rpm Rotor was removed from a university during a clearout.


The Centrifuge appears in good condition and has been regularly serviced, the Unit powers up then shows Error 7 on display.


The details on the rotor are as follows:

Eppendorf 

aerosol-tight

FA-45-24-11

5424/5424R

11/12

ML068


The rotor is rated at 32,000rpm.


Because of the fault, this unit is being sold as spares or repair.

Image of item

£ 142.65 (ex. VAT) 1 in stock

Eppendorf 5417C Benchtop Centrifuge Lab F 45-24-11 rotor - Spars Repairs

ITEM-08745

This unit was removed from a lab as surplus to requirements.


The unit reports error 6 and doesn't run. Error 6 is supposedly:


Converter Overloaded

Brake Defective

Rotor Loose.


We removed and refitted the rotor but no success.


We have not tested it further.


Unit sold as spares/repairs.

Image of item

£ POA 1 in stock

Eppendorf 5424/5424R Centrifuge Rotor - 15000rpm - 24 x 3.75g - Lab

ITEM-17625

This Eppendorf 5424/5424R Centrifuge Rotor was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition but has been used previously. It has not been tested and will need to be inspected for safety before it is used again.


Max 15000 rpm.

Accepts 24 x 3.75g tubes.

Image of item

£ POA 1 in stock

Eppendorf 5424/5424R Centrifuge Rotor - 24 x 3.75g - 15000rpm - Lab

ITEM-17626

This Eppendorf 5424/5424R Centrifuge Rotor was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition but has been used previously. It has not been tested and will need to be inspected for safety before it is used again.


Max 15000 rpm.

Accepts 24 x 3.75g tubes.

Image of item

£ POA 1 in stock

Eppendorf AG Mastercycler Pro 384 PCR Thermal Cycler Lab

ITEM-17785

This Eppendorf AG Mastercycler Pro 384 PCR Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers on but requires a controller to set temperatures, so cannot be tested further.


It is in good cosmetic condition but has been used previously.


Hole size on heater block - 0.1mm


Image of item

£ POA 4 in stock

Eppendorf AG Mastercycler Pro Model 6321 Thermal Cycler PCR Lab Faulty

ITEM-17787

This Eppendorf AG Mastercycler Pro Model 6321 Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit does not power on. We are unsure as to why. It is in reasonably good cosmetic condition but has marks from use.


Hole size on heater block - 0.2mm



Sold as spares or repairs.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ POA 3 in stock

Eppendorf AG Mastercycler Pro S Model 6325 Thermal Cycler PCR Lab

ITEM-17863

This Eppendorf AG Mastercycler Pro S Model 6325 Thermal Cycler PCR was removed from a university lab where it was surplus to requirements.


The unit powers on but requires a controller to set the temperatures and to run, so it was not tested further.


It is in reasonably good condition but has some marks from sue.


Hole size on heater block - 0.2mm


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ POA 2 in stock

Eppendorf AG Mastercycler Pro vapo.protect Model 6321 PCR Thermal Cycler Lab

ITEM-17786

This Eppendorf AG Mastercycler Pro vapo.protect Model 6321 PCR Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers on but requires a controller for it to work.


It is in reasonably good cosmetic condition but has been used previously.


Hole size on heater block - 0.2mm


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ POA 1 in stock

Eppendorf Centrifuge 5415 C 14000rpm Microcentrifuge w/ Rotor Lab

ITEM-17621

This Eppendorf Centrifuge 5415 C was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has some marks from use.


It powers up and is running. The feet have good suction still and it runs very quietly.




Image of item

£ POA 1 in stock

Eppendorf Centrifuge 5424 Micro-Centrifuge (No Rotor) Lab Spares/Repairs

ITEM-17623

This Eppendorf Centrifuge Model 5424 was removed from a university lab where it was surplus to requirements.


The unit powers up bt indicating a lid error. The LCD display is working but the centrifuge has not been tested.


There is some damage to the casing, but it is in otherwise good, clean condition. There is no rotor supplied.


It is sold as spares or repairs due to the damage and lid error.


Image of item

£ POA 1 in stock

Eppendorf Centrifuge Model 5424 Microcentrifuge (No Rotor) Lab Spares or Repairs

ITEM-17622

This Eppendorf Centrifuge Model 5424 was removed from a university lab where it was surplus to requirements.


The unit powers up and the motor operates before stopping (likely because there is no rotor fitted). It was not tested further. It is rated at 14680rpm.


It is in fairly poor cosmetic condition and there is damage to both the casing and the interior.


It is sold as spares or repairs.


Image of item

£ 37.50 (ex. VAT) 1 in stock

Eppendorf F-45-12-11 Stainless Steel Centrifuge Rotor Lid Lab

ITEM-13857

This Eppendorf F-45-12-11 Centrifuge Rotor Lid was removed from a university where it was surplus to requirements.


It is in good condition but has slight corrosion on it.


Unit has not been tested.

Image of item

£ 131.54 (ex. VAT) 1 in stock

Eppendorf FA-45-24-11 5415D Centrifuge Rotor 5424/5424R 4x 3,75g 13200rpm Lab

ITEM-15404

This Eppendorf FA-45-24-11 5415D Centrifuge Rotor was removed from a lab during a clearance.


FA-45-24-11; 5424/5424R.

max 24x3,75g.

max 13200rpm.


The unit is in good used cosmetic condition but does have signs of use and could do with a good clean. It has a powdery residue inside.


Hole dimensions are approx 10.9mm x 38.3mm.


Please note we have not tested this rotor, so it must be safety inspected prior to use.

Items 1381 to 1400 of 3950