Items 2441 to 2460 of 3034

Image of item

£ 90.00 (ex. VAT) 1 in stock

Labcold RLPF05042 Fan Circulated Laboratory Fridge Lab

ITEM-07587

This unit was removed from a working laboratory as it was no longer required.


The unit has been decontaminated, but is still only suitable for laboratory use and should not be used in a food preparation kitchen.


The door is at an angle and not straight but still seems to function well.

There is no key. It looks like the fridge was locked and someone has forced the door to drop to bypass the locking mechanism


Functionally it works as it should and has been tested. It has a thermostat with 7 settings. When tested at 7 (The coldest) it went down to -1.5 degrees. When tested at 4 it was at 4.6 degrees.

Image of item

£ 85.00 (ex. VAT) 1 in stock

Qiagen QIAcube HT QIAxtractor Nucleic Acid Purification System w/ VS04 Pump Lab

ITEM-18203

This Qiagen QIAcube HT QIAxtractor Nucleic Acid Purification System was removed from a university lab where it was surplus to requirements.


Both units power on but we are unable to test them any further as they require a connection to a computer. There is unfortunately no computer included.


The light also didn't come on when powered up. The lid doesn't stay up by itself when opened so perhaps the gas springs are faulty. Other than that, both units are in a good used condition with light usage marks.


The system consists of 2 parts:

1 x QIAGEN QIACUBE HT Model -QIAxtractor

1 x QIAGEN Vacuum Pump Model - VS04


The accessories include:

3 x Computer Accessory cables

1 x USB Cable

1 x Power extension lead

1 x QIAcube HT Software including User Manual

3 x QIAGEN Restore CD's (1 without case has been put with no.2)

1 x Data Sheet Notebook (3 pages)

1 x Calibration reports


Inside there are 2 light blue tube blocks with 96 x 5mm holes and another block at the back with 96 x 7mm holes. There are also 4 x clear plastic tube holders which hold 8 tubes and 2 clear containers.




Image of item

£ 85.00 (ex. VAT) 1 in stock

Taylor Wharton Jencons-PLS 4800 RS Series Liquid Nitrogen Dewar Lab

ITEM-30516

This Taylor Wharton Jencons-PLS 4800 RS Series Liquid Nitrogen Dewar was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has some marks from use.


There are 6 racks inside - D14 W14 H45cm


Please note - because we do not have a supply of liquid nitrogen at our site we have not tested the vacuum. If you have any problems with the unit within 45 days of purchase we will of course offer you a full refund for the return of the goods - however, we cannot reimburse costs of lost nitrogen, samples, time etc.

Image of item

£ 85.00 (ex. VAT) 1 in stock

Spectroline TS-312A UV Variable Range Transilluminator Lab

ITEM-24844

This Spectroline TS-312A UV Variable Range Transilluminator was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition but the safety cover is loose and chipped in one corner. There are stains and light scratches on its surface.


The item powered on without issue. It was giving off UV light, as measured by our meter (not included) which read it at 350 lumens.



Image of item

£ 85.00 (ex. VAT) 1 in stock

Taylor-Wharton Jencons-PLS 4800 RS Series LS4800 Liquid Nitrogen Dewar Lab

ITEM-30517

This Taylor-Wharton Jencons-PLS 4800 RS Series LS4800 Liquid Nitrogen Dewar was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition but has some marks from use.


There are 6 racks inside - D14 W14 H45cm


We were told that the vacuum on this vessel still holds well but we have not tested it at our site. If you encounter any issues within 45 days of purchase we can of course offer a refund in exchange for return of goods. But we cannot reimburse consequential loss for lost nitrogen, samples etc.

Image of item

£ 85.00 (ex. VAT) 1 in stock

CAMAG Automatic TLC Plate Coater- 022.1602 with Accessories Lab

ITEM-23390

CAMAG Automatic TLC Plate Coater- 022.1602


This was removed from a university lab where it was surplus to requirements.


The unit powers up and the belt drives. It was not tested further.


With it are;

2 x tubs of Silica Gel with 100ml Scoop

1 x Set of Weighing Scales

1 x Set of Calibration Weights

& Approx 100 Glass plates 20 x 20cm


It is in reasonably good cosmetic condition with some marks from use.


Image of item

£ 80.00 (ex. VAT) 1 in stock

HPLC System Parts Jasco FP920 Detector , Gilson 231 Injector, Dilutor 401 - Lab

ITEM-15908

This Hewlett Packard Series 1050 HPLC System was removed from a university laboratory where it was surplus to requirements.


The system consists of:


Hewlett Packard 1050 Series Solvent Cabinet


Jasco FP920 Intelligent Fluorescence Detector


Gilson 401 Dilutor


Gilson Auxiliary Output unit


Gilson 231 Sample Injector (Includes 6 sample blocks):-

  1. 3 x 120 Sample block Test Tube size 7.5mm
  2. 2 x 108 Sample block Test Tube size 7.5mm
  3. 1 x 14 Sample block 25mm Test Tube size

Included are a number of accessories shown in photos consisting of:-

  1. Hewlett Packard Ring Binder Manual
  2. Schott 1000ml Glass Bottle
  3. Multiple tubes & cables

All the units powered on fine but we were unable tot test them further.


Everything is in very good condition for the age but has been used previously.

Image of item

£ 80.00 (ex. VAT) 1 in stock

Calpeda Peripheral Booster Pump Type - TPM 80E Lab

ITEM-26292

This Calpeda Peripheral Booster Pump  Type - TPM 80E was removed from a university lab where it was surplus to requirements.


The unit has not been tested as it is not wired up.


It is in good cosmetic condition with marks from use. There are a few screws missing on the fan housing.

Image of item

£ 80.00 (ex. VAT) 1 in stock

PTI FiberLite F10-6x500y Fixed Angle Centrifuge Rotor 250ml Adapter Sleeves Lab

ITEM-13894

This PTI FiberLite F10-6x500y Fixed Angle Centrifuge Rotor was removed from a university as surplus to requirements.


The rotor is in good condition but has previously been used. This has not been tested by us so will need to be inspected for safety before use.




Image of item

£ 75.00 (ex. VAT) 1 in stock

2 x Parvalux Electric Motors - 11/167173/3D & 11/98219/2D Lab

ITEM-21063

2 x Parvalux Electric Motors - 11/167173/3D & 11/98219/2D


These were removed from a lab where they were surplus to requirements.


They are in good cosmetic condition with some marks from use.


They have not been tested.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Topcon Surveying Reflector Prism with Carry Case & Surveyors Tripod

ITEM-25040

This Topcon Surveying Reflector Prism with Carry Case & Surveyors Tripod was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition but there are scratches and glue residue on the tripod. The tripod's lid is cracked and broken. The bag has scuff marks and has been written on with a marker.


It was not tested further but the tripod seems to be in good working order.


Image of item

£ 75.00 (ex. VAT) 1 in stock

Shimadzu / Accuspot NSM-1 Nano Scale Spotter 228-45050-38 For Maldi-Tof MS Lab

ITEM-15501

This Shimadzu/Accuspot NSM-1 Nano Scale Spotter was removed from a lab where it was surplus to requirements.


The item is in very good, used cosmetic condition and powers up fine. We have not tested it any further.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Surveying Reflector Prism with Seco case & Nedo Tripod

ITEM-25034

Surveying Reflector Prism with Seco case & Nedo Tripod


This was removed from a university engineering department where it was surplus to requirements.


The set is in reasonable cosmetic condition. The reflector has scratches on both its metal and plastic components. The tripod has scratches, as well as initials, etched into it.


There was some white chalky powder in the case. We did our best to remove it but there is still some residue.


It was not tested.




Image of item

£ 75.00 (ex. VAT) 1 in stock

Surveying Reflector Prism with Carry Case & Topcon Surveyors Tripod

ITEM-25039

This Surveying Reflector Prism with Carry Case & Topcon Surveyors Tripod was removed from. a university engineering department where it was surplus to requirements.


The item is in reasonable cosmetic condition but there are scratches and marks on the tripod. The tripod's cap is scratched and dented.


The case and the reflector have scuff marks.


It was not tested further.


Image of item

£ 75.00 (ex. VAT) 1 in stock

Surveying Reflector with Carry Case & Surveyors Tripod

ITEM-25038

This Surveying Reflector with Carry Case & Surveyors Tripod was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition. The tripod has scratches on its surface and the case scuff marks.


The tripod can be difficult to level/make steady due to two issues. One of the feet is missing its spike, which makes it shorter and the clamps to adjust the height are very stiff.




Image of item

£ 75.00 (ex. VAT) 1 in stock

Surveying Reflector Prism, Wild Heerbrugg Surveyor's Tripod & Seco Carry Case

ITEM-25043

Surveying Reflector Prism, Wild Heerbrugg Surveyor's Tripod & Seco Carry Case


This was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition but the tripod,s wood and metal are worn and scratched. The metal on the reflector seems slightly bent.


A note left on the reflector says 'bubble damaged'. It does seem like it doesn't level very well.


We had no issue adjusting the height on the tripod. It was not tested further.


Image of item

£ 75.00 (ex. VAT) 1 in stock

Surveying Reflector Prism, Nikon Tripod & Carry Case

ITEM-25041

This Surveying Reflector Prism, Nikon Tripod & Carry Case was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition with scratches on the tripod and initials engraved on both the tripod and reflector. The bag has scuff marks and has been written on by a marker.


There were no issues with adjusting the tripod but it was not tested further.


Image of item

£ 75.00 (ex. VAT) 1 in stock

Thomas Compressor Vacuum Pump Model No. 2750TGHI52/48-402 I

ITEM-29985

This was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has some marks from use.


We have powered up and run the unit. We were unable to test it further than this.

Image of item

£ 70.00 (ex. VAT) 1 in stock

3 x Holophane Lamps Type SLF250HT.AY.GS.C7 510405

ITEM-17321

3 x Holophane Lamps Type SLF250HT.AY.GS.C7


These were removed from a university lab where they were surplus to requirements.


The units are in reasonable cosmetic condition but have seen some heavy use. One of them is missing the bracket.


None of them have been tested.



Image of item

£ 65.00 (ex. VAT) 1 in stock

Philips PU 8720 UV/VIS Scanning Spectrophotometer Lab

ITEM-20487

This Philips PU 8720 UV/VIS Scanning Spectrophotometer was removed from a university lab where it was surplus to requirements.


The unit powers up and the lamp inside is working. It sounded like it was calibrating as it powered up but we cannot confirm that. It was not tested further.


It is in reasonably good cosmetic condition but has some marks from use.


Part No. 9423 187 20001

Items 2441 to 2460 of 3034

Filters

Price (£)

to

Condition